video authentication Jabber on VCS vs that import of TMS

Similar Questions

• Comments of Jabber with VCS registered endpoint control and MCU

  Hi all

  According to my plans. I'll try to integrate comments Jabber with environment of Collaboration.

  Use cases;

  1. call between Jabber and VCS registered control EX90 comments

  2. Add Jabber comments a MCU conference where MCU part control VCS

  3. call between Jabber and Jabber comments

  Comments will be welcome :)

  Best regards

  Mesut

  Hi Martin,

  From Jabber comments 10.0, only #3 above is supported. However, we will publish JG 10.5 soon (I hope that in the next few months), and it will support all 3 of your above use cases. The only downside is to use #1 and #2 cases, you have a CUCM in the call flow.

• Video files (any type) when they are imported, will import the video and audio.

  Premiere Pro (Mac) CC

  3.4 Ghz i7 Quad Core

  750 G SSD

  2 GB NVidia graphics card

  32 MB of Ram

  Any file video, regardless of the codec, import into Premiere pro as an audio file.  I did the things suggested in other forums, such as replacement .mov file extension, I used intermediate codecs, prores422, codec .mov (HDV1080p30) among many others.

  Also, I can't import a video sequence that seems to have an alpha that are associated with channel.  The graphics with alpha channel were made by Adobe AE and work well in Final Cut Pro 10.1

  I need help, FCPX 10.1 is a nightmare and I have a weekly television show that needs to be done as soon as POSSIBLE.  Until now, the switch to first Pro CC disappeared not smoothly.  Any help would be appreciated.

  Thank you for your response.  I could get my hands on Technical Support and we determined that my first Pro CC installation was corrupted.  It's a simple solution to uninstall and reinstall the program.  Now, everything works fine.  To answer your question, when I imported any type of video file (I tried several types of different different video files and codecs) it would be important in audio.  The icon is Audio only, when I put the sequence on the Timeline, I couldn't put anything on the timeline of the video, only Audio was present.

• several times I tried to make a dvd for my video which is 2 hours of that time it hanged after 70%

  several times I tried to make a dvd with dvd creation for my video which is 2 hours of that time it hanged after 70%

  Just a thought...

  Did you get satisfactory results when you save shorter projects?

  It might be worth a try to use a double layer DVD.

• Audio and video out of sync in first after importation

  Hello

  I've seen a lot of discussion threads on this site and others on the subject. I shot some videos on my iPhone 6s and wanted to compile it to Premiere CS6. When I watch the video on my phone, VLC or QuickTime Player, the audio and video line up perfectly. When I import it in preview the sync audio and video download very out of wack. I tried to convert the video in .mp4, .mpg, .mxf file formats, and nothing does the trick. I tried to use the hand brake to apply a constant rate, but not luck. Does anyone have a solution to this?

  Data sheet:

  CS6 6.0.5 Adobe Premiere version

  16 GB of RAM

  a lot of free space on the hard drive

  Thank you

  John

  If you go to the movies on a cell phone from Apple, you may need to use an Apple program for editing... have you looked at Quicktime Pro?

• Of Nikon NEF files turn black after that importation is complete but visible in the bridge, PS, ARC and Win Explorer.

  I don't know if this has been asked recently, but I have another problem of import. I use the latest version of LR and Win 10:Lightroom version: CC 2015.2.1

  Hi wagga9

  Greetings!

  Of Nikon NEF files turn black after that importation is complete but visible in Bridge, PS

  It is a known problem and our team works about it.

  Please follow this link https://helpx.adobe.com/lightroom/kb/thumbnails-display-black-in-lightroom-6-2.html

  Here's a double thread:-images black turning Lightroom

  Let us know if this helps

  ~ Assani

• I can't import any type of video file in the sequence, it represents imports video and audio. Please help me I am unable to work and I have clients waiting!

  I can't import any type of video file in the sequence, it represents imports video and audio. Please help me I am unable to work and I have clients waiting!

  Wild guess: I forgot to patch source the video track.

• Get "authentication error" for a device that is not in the OME

  Hello

  I'm really stuck here. We have over 15,000 "authentication failure" for a device that is not listed in the section "devices." That's why I'm unable to remove this device. The alert is displayed with the ip address that points to a live device (Equallogic member).

  Here's what I've done so far:

  When I try to "ignore this device only" I get an error saying that there is no mechanism for this alert. When we look at the device ID in the database table is displayed as -1

  The goal is to have the reporting of Equallogic in OME and when I add the Group and the Member (which is using this ip address) the device adds ok. But the Alerts continue to occur (showing the correct DNS name this time).

  I then removed the discovery range devices but alerts keep coming (with ip address).

  So for me, it looks like this device got stuck somewhere in the OME and is accessible, although there is no device. But I don't see it came from. These alerts are just a pain and I need to find a way to get rid of it.

  Please is - can anyone enlighten us in this strange behavior. We are on OME 1.2.0.3441

  Thank you

  Thorsten

  Hi Thorsten,

  Well I can confuse or missing some subtle detail here.

  When it comes to SNMP alerts, OME don't communicate with the target, the target device sends an alert to OME.  So if OME Gets a rogue alert in the alert/event console, this is because the device is pointing to the OME IP for sending traps.

  You looked at the target device SNMP parameters itself?

  THX

  Rob

  (Sorry if I'm being dense and not your question)

• Cisco Jabber (Movi) & VCS - E receives no video & audio

  I have a Setup with a VCS Expressway Starter pack (X7.1) where the 2 Ethernet interface is connected to an internal network on 192.168.x.x and interface Ethernet 1 is connected directly to the Internet (through a router to the Internet provider).

  Inside the network I have a few points endpoint TC5 & TC4 and a MCU. Communication of all these endpoints to the Internet works very well for the SIP and H.323.

  I also have a number of accounts on the VCS E Jabber/Movi.

  Registration of Jabber accounts to the VCS-E works very well to both internal and external networks.

  Use on these (v4.3) Jabber account on the internal network or external contact points of termination/SCM on the internal network, there is no problem.

  When you use the same Jabber account to call another endpoint on the Internet, I always a one-way communication, IE the Jabber does not get the video and voice.

  I took a few traces of the VCS-E network but did not find the problem.

  Any ideas what could be the problem?

  Rgds, Geert Folens.

  Greet them salvation.

  Excellent... I am pleased that it resolved your problem. I would be grateful if you set the thread as answered!

  See you soon

  Alok

• When you watch videos or any video for that important tampons, breaks, freezes and plays terri

  to find out why my music videos, videos, films etc. buffer, rupture, treeze and fair play not just of all terrible period.

  Hello

  It seems that you look online. You should check at least 2 things first:

  (a) your connection speed (speed is?),

  (b) how busy the server is

  Kind regards.

• Video of Jabber Cisco Telepresence band bandwidth provisioning

  Hello

  We have deployed video jabber cisco for telepresence 4.5 with VCS 7.2 and TMS 13.2.2.  We use jabber to take interviews. The candidates will be sent the link to download the jabber with the required authentication settings. The Jabber is configured with the Public Max and minimum bandwidth of 768 Kbps.

  My question is related to the downspeed of bandwidth. If we configure the bandwidth of 768 Kbps prvosining and internet bandwidth of candidates is less than 768 Kbps will be the Downspeed VCS to accroding appeal to the bandwidth of the network of candidates.

  for example if my internet connection from home is just 512 Kbps and the use of the jabber to make a call to ex90 in my office. Bandwidth settings is preconfigured in the jabber as 768 Kbps. When the call is established will be VCS downspeed the call at 512 Kbps.

  Krishna.

  You cannot configure a minimum bandwidth, which is always the maximum bandwidth jabbervideo will use.

  The user can only set this value downward but not upward, but as the client detects a loss and stores a database

  with information on used networks recently and its quality.

  So, should not be a big problem the faster speeds available and allow the customer to do magic.

  I woud recommend to (re) read the Jabber_Video_Administrator_Guide

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/MOVI/admin_guide/Jabber_Video_Administrator_Guide_4-5.PDF

  This gives you more information concerning automatic bandwidth adaptation and capabilies of bandwidth detection.

• I bought a song on ITunes and to be included in a short video. How do I do that?

  I bought a song on ITunes and want to include in a short video that I do.  I can't be able to find it in my music on the computer list.

  Well well... one thing is for sure... you need to find
  the file before you can import it into Movie Maker.

  Try to do a search for the name of the song and maybe
  you will find it.

  Windows Vista - tips for finding files
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-finding-files And... There is a good chance that you will have to convert
  it to the. WMA format for use in Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your audio clip on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Camera import Windows video gives dates with the date of importation and don't shoot don't date!

  When I import pictures using windows import camera it gives all my videos the date where I imported them and not the date, I took them. they come out well on my camera. So if I copy and paste it, it gives the correct date. except that I want to use Windows import not only to copy and paste! Help, please!

  If you import data, this file of date data, show the date of importation.

  I use another program to copy pictures from the camera to the PC and gives the dates of importation and the device date.

• Cannot use video when Jabber is in command mode of fixed phone

  Scenario:

  The use of Jabber 9.2.1 to control a Cisco 7945.  I compose a Cisco SX20 by DN video unit, and call connect in audio mode only.

  Jabber usually allows for me to start the video after the call connects in audio mode only, but in this scenario, this option is not available.  If I change Jabber to use the device of the CSF, the video works perfectly.

  To do this, you need the MSI. Also make sure that the video is enabled on the phone (you will see a camera icon in the lower right).

  Please remember useful frequency responses and identify useful or correct answers.

• Problem with the introduction video of Jabber.

  Hello!

  We have a customer running video Jabber 4.4.3 on computers with Windows 8 and Office 2013.

  They feel that when they try to show a presentation of a desktop program it sends a white image, and the program they want this blink in white.

  Someone of you know this and if there is no solution?

  Concerning

  / Olof

  could you please delete this thread as you have also posted

  https://supportforums.Cisco.com/thread/2198059?TSTART=0