Video camera Sony DCR-SR68

Similar Questions

• How can I get rid of the e:31.00 error code in my Sony DCR sr68 camcorder

  How can I get rid of the e:31.00 error code in my Sony DCR sr68 camcorder

  Hello, axel028!

  If I'm not mistaken, the E:31:00 error code can occur on hard drive camcorders and indicates there is a format error on the hard disk of the camcorder. A kind of data corruption occurred.

  If possible, try to first back up all the data saved on the disk hard camcorder to a computer. It will try to reformat the hard drive in the camcorder.

  Try resetting the camcorder. How to reset the camcorder is in this link below:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/39511

  If you have tried to reformat the hard drive in the camcorder or you have reset the camera (or both), and the problem is not resolved, then the service may be required.

  Sorry for the inconvenience!

  Best regards

• Unable to capture video from digital camera Sony DCR-HC26

  I replaced a PC under Windows XP with a new PC running Windows 7 Home Premium and I was not able to connect my Sony Handycam DCR-HC26 digital tape camera to the new PC.  I use an I-link (firewire) cable.  The camera seems to be recognized by the PC as a Sony DCR-HC26E, but trying to capture the video, the following message appears: "failed to find the camcorder (band). Check the i.LINK to the Handycam. "I suspect a problem driver type is the cause but I'm running out of ideas on how to solve this problem.  Any ideas?

  Curry,

  I don't understand your suggestion.

  1. When you say "entry for firewire (IEEE1394)", do you mean "entry for controllers Host Bus IEEE 1394"?
  2. When you say "pilot LEGACY", what is it and where can I get a "LEGACY driver"?  (I clicked on properties for the Texas Instrument 1394 OHCI Compliant Host Controller and did not find anything on "LEGACY").

  Bruce

  Hey, maybe I can answer this question.
  1 double-click on controllers Host Bus IEEE 1394 you will find the appeal of device 'compatible OHCI 1394 host controller ".
  2. highlight the 'compatible OHCI 1394 host controller' right click on "update driver software".
  3. Select 'Browse my computer for driver software ".
  4. at the bottom of the window, select "Let Me pick from a list of device driver on my computer.
  5. you can select "1394 OHCI Compliant Host Controller (legacy)" as the driver and then click "Next".
  6 fact

• I can move video from Sony DCR-SR42 files to a memory stick?

  Please show me how to move a movie from a disk file to a memory stick Sony DCR-SR42 hard. Thank you.

  Location Memory Stick of the DCR-SR42 is used to record images and so it is not directly the camcorder can transfer files from the hard drive to a Memory Stick. However, once you have the camcorder connected to your computer, you can then move the files using your computer.

• Connect a Sony DCR SR68 camera to a mac?

  Hi, can someone help me with the program that I use to help me get my talking Handicap of Sony (model DSR SR68) on my Mac? Best regards, Lawrence.

  I found this on the Sony support site-> https://us.en.kb.sony.com/app/answers/detail/a_id/34494/c/65, 66/p/36919,37412,37 413,37453 /

• I have a sony dcr sr68 handy cam

  I have window XP with 4 usb ports for my printer and my lap top of woman. I have the cable in the usb port 2 othe and nothing happens. It works before, now I can't help please

  first thing you must make sure that the unit settle for removable memory card

  If can not you can troubleshoot it with usage or the USB to test all the port of your...
  If still can not you can check with your device manager that the driver finally add in it or not...

• Import video 8 Sony DCR-TRV210E PAL

  Hi all

  I would like to import video from my friend E DCR-TRV210 (Sony).

  Importing digital video (iMovie) works very well.

  Import analog Vidoeo (that I assume to be converted by the DCR) works:

  I can see the video online on my screen when I start the import.

  Complete the import...: NOTHING (black screen)

  There are a few files that point to the correct video-name (for example, "test") but no directory

  "Original media" a.s.o..

  Can someone help me, please?

  BTW. : I'm on MAC Pro El Capitan (10.11.3), video comes through fire-wire 400 to fire wire 800 in love at first sight!

  iMovie version 10 requires the timecode for the import.

  Your camcorder product for digital tape timecode but not for the digital conversion analog (cassette Hi8).

  This is the case even when you use the camcorder in pass-through mode. (analog to DV out).

  You can try to use QuickTime Player to record instead of iMovie, it's on your Mac.

  It seems not to need to import timecode.

  How to use QuickTime Player - Apple Support

  Follow the instructions to record a movie and select Maximum quality.

  Then, you need to import the data into iMovie.

  Note that you won't get the scene breaks as you would a digital tape, but a long clip rather making it a bit more tedious to change.

• Import media from Sony DCR-TRV355E

  I bought Final Cut ProX in part to change a large stock of video family based on Strip. Now, I find that my video camera Sony DCR-TRV355E, who has worked well with iMovie 06HD no longer works was FCPX. Entry shown in the video import screen but at the top right the legend says no signal of the device.

  After having scoured the manuals that I see that my camera is not taken in charge that is a great shot. Surely, there must be a work around?

  Would be very grateful for the help. Thank you

  FCP X treats D-8 camera as a device not controlled, no timecode.

  Try to use QuickTime X to capture.

  Al

• How can I connect a Sony DCR-HC21 camcorder to the computer from Windows XP to download / burn to DVD

  I try to connect the digital video camera Sony DCR-HC21 to computer Windows XP download from videotapes and to edit and burn to DVD.

  Have output DV on camera and input Firewire on computer. The computer does not recognize the camera device.

  Just reply to * address email is removed from the privacy *

  What happens when you connect the device to the computer?
  Do you get the ping of the adding new hardware?
  If this isn't the case, I suppose a defective component, maybe the cable, if some tests would be in order.
  Here along the list of things to look at.
  http://www.myvideoproblems.com/ProblemPages/CannotCapture.htm

• I can't get CS6 to recognize my Sony DCR-TRV340 camera to capture video from this camera.  CS6 C

  I can't get CS6 to recognize my Sony DCR-TRV340 camera to capture video from this camera.  The CS6 capture Tin can, set up a message that a capture device is offline.  Camera Sony DCR-TRV340 is not listed in the CS6 device Type list in the CS6-DV/HDV cameras Sony device control settings box.  I downloaded what I believe are the right drivers for the TRV340 and when I connect the camera to the computer, the computer shows it is in the box devices and printers, but CS6 do not recognize.  Do I need to install these drivers in a specific CS6 program folder?  If Yes, where can I find these drivers in the Professional operating system of windows 7, and in which folder CS6 would copy their?

  Thanks John,

  The controller IEEE 1394 of switching for the Legacy driver did the trick.  CS6 now recognizes my camera.  Thank YOU MUCH for the help!

  Chuck

• SONY video camera "DCR-PC7E.

  ICH habe windows 7 und meine digital camera Sony vom Computer nicht erkannt wird.  (Kamera stammt aus dem Jahr 1996, auf computers konnte ich die fruheren film im computer aufnehmen.) -Fur den Anschluss habe ich von "einen VIDEO GRABBER USB 2.0 high resolution."

  Wanted ich Arbeiten mit MAGIX VIDEO DELUXE Premium to 2013. -Worin liegt der Fehler?

  Hello

  The forum in which you've posted is for English only. Please select your language by clicking on the globe on the page down to the left to post your question in the language of your choice. If you can't find the desired below language, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• Problem with SONY DCR-DVD650. Unable to get the finished videos transferred to my computer.

  Hello world

  I have a Sony DCR-DVD650... I also use the mini DVD - RW for recording.

  When I put the DVD in my computer, or you are trying to access via a USB cable connected to the camera, however there is no videos. I can clearly see the videos in the preview of my camera...
  I've also developed videos...
  Solution Explorer displays a single folder which is DVD_RTAV which includes 3 other files 'VR_MANGR. BUP', 'VR_MANGR. IFO' and 'VR_MOVIE. VRO.

  What I am doing wrong? And how to get these videos on my computer to be able to
  Change them. Help, please! Would really appreciate it, thanks

  The basis of the record that you have seen inside the disc, you saved your footage in [VR mode]. The DVD_RTAV folder that you found inside the disc is indeed the folder that contains your images, and you can go ahead and copy the contents of this folder. The more you can do with these files is to find a software that will be able to read. It is not possible to change them on a computer.

  To ensure that you will not work in this problem next time, please save your videos in the standard [MOVIE mode] instead of [VR mode]. Once you have done so, you will find your images in a folder named [VIDEO_TS], and you will be able to copy and modify these files.

  If this post answered your question, please mark "accept as a Solution.

• I can't download videos to my computer from sony DCR-HC22E hanycam

  My computer does not recognize the video from my Sony DCR-HC22E handy cam and therefore cannot modify any movie DVD etc.

  My computer does not recognize the video from my Sony DCR-HC22E handy cam and therefore cannot modify any movie DVD etc.

  ======================================
  I was wondering,... you connect to PC via IEEE
  1394 FireWire (Sony i.LINK) connection?

  The following items may be worth a visit:

  Windows Vista - import video from a videotape
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Import video in Windows Vista
  http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

• Camera Sony HandyCam DCR-TRV280 is not recognized by Windows 7

  I have a Sony HandyCam DCR-TRV280, a Toshiba L505D-S5963 running Windows 7 Home Premium 32 - bit.  My PC does not recognize the camera.  I loaded all drivers and updates to date mentioned above, but when you say to "go into the Device Manager and find the entry for the firewire (IEEE1394) change the driver for the IEEE1394 driver LEGACY and now your camcorder will be able to speak correctly on your PC.", my device driver does not list an IEEE 1394 device.   However, I tried to load the copy and save the 1394bus.sys to C:\Windows\system32\drivers file, but it will not accept a .inf, .sys not file.  I really appreciate all the information below, but would appreciate a little more help.   Thank you

  Hello Softail1015,

  In addition to the response of Amrita M, please relay exact model number and type of the Sony camcorder.  You can also view the link below, provided by the manufacturer of the device that contains compatibility information and pilot for the Handycam from Sony DCR-TRV280 Digital8 camcorder:

  http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=DCRTRV280&SelectOS=46#div_pos_124

  In addition, it seems that the Sony DCR-TRV280 may require an IEEE 1394 connection to transfer the video from the camcorder to the computer. You can also check with the manufacturer of the device to check if the Sony DCR-TRV280 supports the transfer of DV via USB or USB streaming.

  You can also view the link below, provided by the manufacturer of the device that describes the steps to know how to transfer video to a computer using an i.LINK (IEEE 1394) connection using the digital camcorder:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C111893

  I hope this information is useful.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot transfer videos from camcorder Sony DCR-TRV19E

  After I upgraded to Windows 7 (32 bit) I can't transfer/copy my videos from my Sony Handycam DCR-TRV19E to my PC. HP PavilionIs there one update/download/patch that I can use or buy? I now have ready for me to download & edit several bands

  Perhaps the following goods range offers a few ideas:

  How to import videos in Windows Live Movie Maker
  http://www.Dummies.com/how-to/content/how-to-import-videos-into-Windows-Live-Movie-Maker.Navid-323836.html

  How to import video from a digital video camera
  http://windowslivehelp.com/solution.aspx?SolutionID=4cbc4e6c-face-49A0-a9fd-607056006610