Video capabilities - confirming the current Limitations (check + superior quality Sorenson)

Similar Questions

• How to insert a video caption to the current point rather than at the end of the Group

  I have two video groups

  + Subtitles

  + Videos

  I add captions to various locations along the timeline. Whenever I do it adds after the last item in this group, rather than the position of the timeline slider (which is where I want to). I then have to go to the end of this group and then drag it to the point of origin.

  Anyone knows how to insert at the current point?

  I don't think you can do it the way that you what. The place command is under the main menu: file > Place > Embedded.

• Why should I uncheck responder OCSP query servers to confirm the current validity of certificates to access the site Web of Yahoo?

  If I check the servers of responder ocsp query I get the error message sec_error_ocsp_old_response. If I uncheck that box yahoo charge very well

  Hello, can check you that your system clock is set to correct date, time, and time zone? -> time.is

• AutoScale is independently performed the current limits of the view.

  Hello

  I work with a ScatterGraph with the number of plots in it.

  When I put the YAxis AutoScale Mode, auto-scaling is performed independently of the graphics currently displayed.

  For example:

  If my graphics maximum peak value is 100 and the minimum value is 0, but the displayed range values range between 4 and 10, the graph will always evolve to 0-100.

  p.s. is there anything like the function AutoScaleNow() for c#?

  I use the "Measurement Studio 8.1.2.472"

  Thanks for help

  Danny,

  Measurement Studio does not provide a function to do what you are looking for. The solution that you cooked up with to examine all items displayed and find the Max and Min Y and then manually by setting the YAxis brought to these values chart is probably the best solution. I'll drop a suggestion for this feature to add to Measurement Studio product.

  Kind regards

  ADri Kruger

• Projection Shockwave Flash as v16.0.0.287's plugin check but he updated the current 16.0.0.305 and restart Firefox (v36.0) do not change the situation.

  Shows a check as v16.0.0.287 Shockwave Flash plugin, but it updated the current 16.0.0.305 and restart Firefox (v36.0) do not change the version number or status when rechecking the plugins. Control of Adobe and the Flash Control Panel website confirms 16.0.0.305 is installed. All the solutions to this?

  I noticed in the information in the topic: plugins page under Shockwave Flash, path: line was showing.

  < path: C:\WINDOWS\SysWOW64\Macromed\Flash\NPSWF32_16_0_0_287.dll,C:\WINDOWS\SysWOW64\Macromed\Flash\NPSWF32_16_0_0_305.dll >

  For outdated version 287 .dll file was still there and listed before the current version of 305. I deleted the 287 .dll version and restart Firefox and check the plug-ins again the problem seems to have been resolved.
  Greetings - Spindrift

• I updated to Firefox 8.01 and confirmed that it is the current version. However, both Google and Firefox do not recognize my current verision - these sites indicate that my version is 3.5.7. Why?

  I've updated (more than once) to Firefox Version 8.01. When I check the Firefox Help: About, it confirms the version number and indicates that it is the current version. Google, however, when I try to use G-Mail or + Google, gives me a message that my version of Firefox is no longer supported (and provides a link to download the current version). In addition, Firefox itself, when I tried to use the help: menu option to submit your comments, indicates that I can't use this option until I first updated to the current version. Apparently, even though I've updated, there are some markers or indicator, which is not updated since a previous version to indicate which version of this browser Web sites is running on my computer. I would like to get this resolved, because it prevents me from doing a few things I want to do. Furthermore, I just watched the dialog below, following the comment "we have made some assumptions about your current browser...". ', also indicates that my current version is the 3.5.7.

  You have a pref general.useragent.override that identifies you as Firefox/3.5.7

  • Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.1.7) Gecko/20091221 Firefox/3.5.7 (.NET CLR 3.5.30729)

  See:

  • https://support.Mozilla.com/kb/websites+or+add-ons+incorrectly+report+incompatible+browser
  • http://KB.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

• Do not use the Brink game on my computer laptop-message of error: the current video card/driver does not support openGL3.1 or newer.

  I bought this game for my son who has installed ok. But when pressed on play error message: the current video card/driver does not support openGL3.1 or newer.

  We have Windows Vista SP2. Does this mean I now have to buy a video card or y at - there a way around this without costing me more money?
  Kind regards
  Sam Towle

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1: make sure the game is compatible with your computer.

  Method 2: update the video card driver and check if that helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  If both methods fail, you will then need to get a new video card.

  I hope that helps!

• I keep getting messages "Flash obsolete. Firefox Plugin Check says it is up-to-date with the version 11.2.202.418 but the current version is *. 425 cannot be installed.

  I use Ubuntu 14.

  These last days (say, a week) I get messages saying that the Flash is obsolete, and firefox blocks the plugin, so I have to unlock ('allow') every time that I get to a new page. It's no big deal, but it's boring and, for example, I can't watch movies on my page of favorite movie...
  In the firefox Plugin Check page, I get a message 'to day', but it shows the version 11.2.202.418, which is also the version of Ubuntu Software Center and current version is 11.2.202.425. I tried this https://support.mozilla.org/en-US/kb/keep-flash-up-to-date-and-troubleshoot-problems#w_updating-flash for a manual installation instructions, but cannot get to the place where firefox is installed.

  I already moved chrome Firefox because of repeated malfuntioning of chrome, I have nowhere to go! (pity me).

  Thanks to you all! And sorry for the spelling mistakes / syntactic possibilities, English is not my first language.

  I think Unbuntu would have an update now that 11.2.202.425 has been out of Adobe since December 9 as 11.2.202.424 and is more vulnerable.

  Find the .mozilla folder at / and create a folder called plugins , so you can place the libflashplayer.so file here.

  Now, all installations of Firefox and SeaMonkey will be able to use it.

  Flash 11.2.202.425 tarball is to
  https://www.Adobe.com/products/flashplayer/distribution3.html

  https://helpx.Adobe.com/security/products/Flash-Player/apsb14-27.html

• is that any limits the current entry for the digital I/o?

  Hi all

  I wonder if there is no limit on the input to the digital I/o port. I have a device about 0.2 volt voltage outputing and the manual says the maximum sink current is 25mA. I connect this signal to a DI entry in my 6711 map. I wonder if the current is too large for the entrance of DI or the PFI?

  As we have already mentioned, there is no current flowing on the device in low level mode.

  The current specifications mentioned see the maximum current that can be managed by the device in low level mode.

  I hope not to confuse you more than necessary. On a row of data to the TTL level, nothing flowing from the device to the main circuit in level mode high current. In low mode, there is flowing in the main circuit in the current device. This current is inherently limited by the circuit.

  So, if you have a file specification of 25mA max. of the peripheral device in low level mode, it will never sink too much power from the main circuit. You can connect two devices without any risk. The maximum current is just specified in case you manage more current with the device, a led or a relay for example. In this case, the charge current must be limited, so that you do not damage the device. But - as mentioned - this is NOT the case in your application.

• Y at - it a registry key to check if the current user can install a windows updates? also, what registry key that is used to verify whether a user is an administrator or not. Thank you...

  Y at - it a registry key to check if the current user can install a windows updates? also, what registry key that is used to verify whether a user is an administrator or not. Thank you...

  There is no need to check the registry keys to see if you can install updates or not.

  You just need to be connected to an administrator account to install the Windows updates.

  You can check if you are in an administrator account by trying taks simple administrattor. For example. Try to change the time system.

  If you can change the time, you are an administrator; no other.

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I drag the current time indicatorin the timeline the video preview does not work. How can I fix it?

  When I drag the current time indicatorin the timeline the video preview does not work. How can I fix it?

  

  Which turns off.

• I created an adobe account and I am currently trying to install creative cloud to be able to try the trial version of photoshop and lightroom, however I can get insofar as the process of checking e-mail and adobe is sending the e-mail to my nephews one em

  I created an adobe account and I am currently trying to install creative cloud in order to try the trial version of photoshop and lightroom, but I can't get insofar as the process of checking e-mail and adobe is sending the e-mail to my email from hotmail to nephews who is not associated with this account.  He used my iMac in November but I only created this adobe account this week.  His e-mail address is not linked to this account anyway... help.  I really need to try out photoshop and lightroom and do not want to buy the monthly where the same problems occurs.  Thanks in advance.

  > He used my iMac in November

  What you need to do is to get him to sign with the cloud on your computer, uninstall and clean all Adobe, then login with your account

  Disconnect the TWO accounts... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and before reinstalling is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to YOUR account... Reinstall

• I want to build a form with radio buttons to customers limited checking all the options.

  I want to build a form with radio buttons to customers limited checking all the options. I have a range of products and to quote accurately, I want to get specific information.

  If I get this, what you want to display the shape options to specific customers, not to all the viewers of the site?

  You must create a secure area where authorized viewers can connect and view the form with all the options, form itself we can not set up since what few customers are going to see other options and others are going to see another.

  This is possible since the end of your accommodation. Or if you are using Adobe server for hosting, then you can create profiles for clients and then set up another form altogether to achieve this goal.

  Thank you

  Sanjit

• How to check the current values of COMMIT_WAIT and COMMMIT_LOGGING

  Is it possible that you can check in a session to determine the current settings for COMMIT_WAIT and COMMMIT_LOGGING? I am not referring to a situation where they are defined via ALTER SYSTEM and changed the world, but changed using ALTER SESSION and locally defined. I'm currently testing a trigger to do it for a very specific batch user and just need to be able to log on and check if the adjustment was established successfully or not.

  >
  Is it possible that you can check in a session to determine the current settings for COMMIT_WAIT and COMMMIT_LOGGING?
  >
  Well, since these are the initialization parameters, you can check the PARAMETER V view $

  select name, value from v$parameter
  where name like 'commit%'
  
  NAME,VALUE
  commit_point_strength,1
  commit_write,
  commit_wait,
  commit_logging,
  

  And after changing their

  alter session set commit_logging = 'IMMEDIATE';
  alter session set commit_wait = 'FORCE_WAIT' ;
  
  NAME,VALUE
  commit_point_strength,1
  commit_write,
  commit_wait,FORCE_WAIT
  commit_logging,IMMEDIATE