Video card (and others) upgrades for a HP Pavilion Elite HPE-510 t

Hello... First of all, I just want to say that these forums have been an invaluable resource for me in my quest to upgrade my current PC. A lot of good answers and always at the top of the Google search results, you guys have been so super helpful. Without a doubt a very different experience from what I got when I bought my PC from a company that rhymes with 'hell '.

I have a few specific questions, however, and thought I'd throw them to let experts weigh... For the record, I have a HP Pavilion Elite HPE - 510 t with all parts except for the video card, which is currently an ATI over-pants v4800. I am running three monitors 20 "(1 DVI and Display Port 2 at present, but who can be flexible). Also, I don't a few moderate games (FPS, MMO) and watch a lot of Netflix...

1. I'm certainly looking to update my video card, but I do not know what actually fits. I'm ready to upgrade the PSU as well (probably to the Corsair CX-600 recommended elsewhere on this forum), so power should not be a problem. And money is not a huge problem either, as long as the card is less than $500 or more. I've been watching some of the newer cards (like a 680 GTX or even the new 770), but I'm afraid that they will not physically fit in the case, or will be not compatible with the motherboard (which seems to be the PCIe 1.0? Or I read wrong?). So basically, my ultimate question is: what is the best possible graphics card given my case current and potentially put to level power supply, motherboard, I could use? If it's important, SLI is feasible but not more.

2. I also intend to add additional RAM. The page on the card to my PC to the HP support Site says it takes DDR3 1600 PC3 10600, but everything that I find these days in the RAM is DDR 3 1600 PC3 12800. My mother/PC card will support the 12800 or do I have to keep hunting to find 10600 sticks?

3. and finally, I'll also put in a Pro 840 Samsung SSD. Do you know if the motherboard compatible with the SATA connectors suitable for speeds of 6 GB? Just plug page says "SATA" and does not specify a version.

Any help you could give me on these questions would be greatly appreciated. This computer has served me well for a few years now, and I'm hoping to keep it for a few more years. Thanks in advance and have a nice day...

Aaron

Here are the specifications of plant origin and configurable options for your desktop HP Pavilion Elite HPE - 510 t CTO and here are the specs of his card mother IPISB-CH (Cleveland). According to the specifications, the motherboard uses the Chipset Intel H67 Express that supports an extension v2.0 x 16 PCIe and 3Gbs SATAII (SATA2).

(1) SLI is not "feasible", so no need to go there. GeForce GTX 680 cards are going to be long, perhaps too long. You need to measure the space available at the back of the case more further along the x 16 PCIe slot to determine what can be installed. You will need to resign it a notch or two... until you find one that matches. The CX600 Corsair is a great choice and fits, even if you can buy the place CX600M. The CX600M is modular and allows much better management of the cables and so the potential for a better air circulation.

(2) with regard to memory, the State of the plug;

Four DIMM DDR3 240-pin connectors
Supports the PC3 10600 connectors DIMM DDR3 (1333 MHz)
Memory non - ECC, unbuffered

Then, two sets of most of these (2 x 4 GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Kits should do the trick. You can also go to the website Crucial.com and use two of their 'guaranteed compatible memory upgrade'.

(3) your computer supports speeds SATAII (3Gbs) and this is the best it will do. However, the SATA connector is identical to what is found on a SSD SATAIII and it should be compatible with your computer.

Please send BRAVO

Tags: HP Desktops

Similar Questions

  • Upgrading the PSU and GPU for my HP Pavilion Elite HPE-510 t

    Operaring system: Windows 7 64-bit

    CPU: Core i5-2500, 3.3 GHz

    Memory: 10 GB

    Video graphics card: GeForce GT 420 - OEM

    Hard drive: 1 TB

    Computer case: height: 38 cm (14.96 inches), width: 17 cm (6.69 inches), length: 41 cm (16,14 inches)

    Power supply: power supply 300W

    Several features of the product: HP Pavilion Elite HPE-510 t

    due to the diablo 3. I updated graphic setting the lowest. FPS is between 15-22 so I'm interested in upgrading my power supply HP Pavilion Elite HPE - 510 t(specs are above) and graphics card with the following, respectively:

    GPU: ASUS GeForce GTX 560 (Fermi) 1 GB 256-bit GDDR5

    GPU size: 9 "x 4.4"

    Power supply: Antec High Current Gamer HCG-750 750W Series

    "Power supply Dimensions: 7.1"x 5.9"x 3.4"

    I wonder if these prodcuts will enter the computer, as is or if I should look for other products.

    Thank you

    The ASUS GTX 560 should adapt and work very well. The Antec PSU is great and very likely to have problems in the space provided. It can interfere with connections to the motherboard and push against the CD/DVD discs. Please look at the Corsair CX600 instead. It is only slightly larger than the block of power SUPPLY HP stock and is known to adapt.

    Frank

  • Help with updates for HP MediaSmart Suite & DVD/BD discs for PC HP Pavilion Elite HPE-112y

    HP Pavilion Elite HPE-112y PC

    VT637AA-ABA

    Genuine Windows 7 Home Premium - 64-bit

    Blu - ray player

    HP MediaSmart Software Suite

    I bought my computer new from Best Buy in 2010.

    HP MediaSmart Version: 3.1.0.1

    HP TouchSmart DVD Version: 4.1.2.5122

    HP TouchSmart Music Version: 4.1.1.4604

    HP MediaSmart Photo Version: 4.1.2.4327

    HP MediaSmart video Version: 4.1.2.4322

    HULU Desktop: Host Version: 0.9.14.1 - SWF Version: 0.9.15.33

    HP MediaSmart/TouchSmart Netflix Version: 1.0.2.0

    I have apalogize, I know that this has been done before, but I'm looking for different software or updates not upgrades.

    A couple of weeks, I tried to watch a movie Blu - ray (made before 2013) through HP MediaSmart DVD, when I put the movie in him would ask if I wanted to check the updates, so I said yes, he started the process of loading and asked again if I wanted to check the updates. Finally, I took the film and went into settings, watched in updates and there was an update. So I chose the update and HP MediaSmart DVD HP TouchSmart DVD changed. After that, the movie played fine.

    Now I'm watching a Blu - ray movie (made in 2013) and still once he asks me if I want to check the updates, so I took the film out, went into settings, that update, but there is nothing there. I put the movie back to try again and he asks me if I want to check the updates, so I push No., he would say "disk ready for play. Press Play to start. "So I press start and it will immediately message asking if I want to check the updates. So then the movie is still in I go into the settings, that update, and there is still nothing.

    All DVD for the 2013 game and rain fines. All comics before 2013 play fine. All BDs for 2013 keep asking check updates.

    Now, I find another reason that could not work the BDs is because my DVD/BD players could be updated.

    Device: hp BD O DH4O3S SCSI CdRom Device & hp DVD a DH16AAL SCSI CdRom Device
    Driver provider: Microsoft
    Driver date: 21/06/2006
    Driver version: 6.1.7601.17514
    Digital signer: Microsoft Windows

    I clicked on the update for both driver and said that I was aware.

    I find no new updates for HP TouchSmart DVD on CyberLink website. Where can I check updates? In addition, what I have to update all of the HP MediaSmart Software Suite to make it work (and where I do that)? Are there updates for DVD/BD drives and if there is where can I find them?

    Someone, please help me to find the updates.

    Sorry it took so long to get back to that.

    I finally got a new monitor (a long while ago):

    HP Pavilion 22bw IPS monitor 21.5 backlit "

    1920 x 1080

    VGA, DVI - D, HDMI

    So I tried again a movie BD 2013 on the HP MediaSmart/TouchSmart DVD thanks to the new screen and he asked again if I want to check for an update, but it worked fine on PowerDVD from CyberLink 13 (which means I have to buy ). So I have not watched all BD movies on my computer for awhile.

    I recently bought a new computer and restored my old computer to its factory condition and reinstalled all programs and installed the updates I could find.

    After I restored the computer I tried BD 2013 & 2015 on HP MediaSmart/TouchSmart DVD movies and he even asked if I want to check for an update. It's been 2 years and still no new updates! Looks like HP MediaSmart has become obsolete. I don't know if PowerDVD 13 still works because I obviously don't buy it.

    Thus, it seems that if someone wants to play movies BD 2013 or newer that they should ensure that they have the right connection between the monitor and the computer and buy a new BD software to replace the old software obsolete.

    With my new computer, I'll be closing this and boxing upward. So I don't need to worry about this more.

    Thank you for your time and your help. And good luck to anyone else who might have the same problem.

  • HP Pavilion Elite HPE-030sc: upgraded my desktop HP Pavilion Elite HPE-030sc computer

    Hi my product is a

    Desktop HP Pavilion Elite HPE-030sc (VS167AA-UUW)

    its kind of a simple question, but I can't find the answer anywhere

    I can opgrade my pc with the new graphiscard like this

    MSI GeForce GTX 2 960 GB of games PhysX PCI-Express 3.0

    If I can its large if not what is the most recent card I can buy

    I play Battlefield4 and I want to play with max resolution

    help me - thanks in advance

    Best regards, Torben

    Lazyboy_dk, welcome to the forum.

    The concern I have with the MSI GeForce GTX 960 Gaming 2 GB PhysX PCI-Express 3.0 is its length.  It's 10.5 ".  It is perhaps too long for the space.  In addition, it may require UEFI in the motherboard instead of a standard BIOS.  You can contact MSI Tech Support to see what they have to say.

    Most of the newer cards require UEFI, also.  The last card EVGA does not for UEFI was TG 640.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Dimension 9200 video card and processor upgrade

    I have a Dimension 9200, which currently holds a (Republic popular of CHINA, E6320, 1.86, 4 M, CDCR, B2) processor inside. Since Intel always uses the same socket technology can I replace with a (Intel Core 2 Quad Q6600 Kentsfield 2.4 GHz 2 x 4 MB L2 Cache LGA 775) CPU Quad-Core?

    My current graphics card is also (CRD, GRPHC, G84, HMGA15) I can replace it with one (01 G-P3-N870-AR of EVGA GeForce 9600 GT 1 GB GDDR3 PCI Express 2.0 x 16 HDCP Ready SLI 256-bit supported) video card?

    One of these would require a power supply greater than what exists currently in?


  • Differential of 10 ° C between core 3 and other core Q8200 to HP Pavilion Elite m9525f?

    I bought a HP Pavilion Elite m9525f last weekend and noticed that this core 3 was running hot in comparison to the other three cores of the processor Q8200. It was according to program SIW that I downloaded on the internet. Core 3 still works more than the rest of about 10 degrees C. Is this normal? Readings were found with side panel of the case off the computer. Basic 3-51 and the closest possible other core (Core 0) at 41 C.

    Is the CPU and case fan speeds set? They seem to stay at approximately 1080 RPM (program only used SpeedFan to read RPM) even when I have the Power Options program in Control Panel the value high performance.

    Incidentally, I found the main video card bios setting to the PCI instead of PCIe x 16.

    Thermal sensors can be "significantly" at low load.  Run the latest version of Prime95 to load all four cores and real time allows to check the base temperature.  Drivers should be ± 3 C.  The CPU is soldered to the heat-spreader, so there is not much you could do to equalize the delta T.  The lower range and E7xxx processors use plain thermal paste instead of welding of low temperature to improve the transfer of heat to the heat-spreader.

    The processor fan should ramp upward after 1 min of Prime95.

  • A usb 3.0 card can be upgraded to the HP Pavilion Elite e9150t CTO desktop computer?

    I have a HP Pavilion Elite e9150t CTO Office, which has been upgraded to Win7 64-bit.  Could I move to the newer and faster usb 3.0 by purchasing and installing a card with usb ports?

    Hello

    Based on the following specifications, it has a few free PCIe connectors:

    http://support.HP.com/us-en/document/c01792852

    You can add a card PCIe USB 3.0 on your computer such as:

    http://www.eBay.com.au/BHP/USB-3-0-PCI-e-card

    Kind regards.

  • A higher speed ethernet card can be installed in an hp pavilion elite hpe-400y

    Is it possible the increase in speed on ethernet and HP pavilion elite hpe400y? I would switch to 1 Gbit / s is a possiblity

    Hello

    Yes, install a 1 Gbit/s for a spare PCIe slot PCIe card will do. Driver would come with the package or downloadable from the site of the seller.

    Kind regards.

  • Two monitors for the HP Pavilion Elite HPE with a Nvidia GeForce GT420

    I currently have a HP 2211 monitor x and I have no connection problem which, however, I recently bought a HP s2331a I have bad to configure the monitor because it does not recognize the monitor is there something I am missing or just may not know how to connect the 2nd monitor. Please help me.

    Mike, thanks for the clarification and the model of the computer.

    There is a DVI - I and HDMI port on the computer.  You probably have to use an adapter to plug one of the monitors.  The key is to ensure that the drivers and software for both screens are installed on the computer.  Otherwise, it will never work properly.

    Also, here's a guide that should help you get properly connected.

    Good luck!

    If your problem is solved, please click "accept as a Solution.

  • How can I activate the boot usb for my HP Pavilion Elite HPE - 480t CTO desktop PC?

    I have a usb key with the Windows operating system installed. But I could not find a way to get started on the drive on my hpe - 480t.

    Any suggestion?

    Thank you

    Wayne

    NVM. I can boot from a USB on the computer.

  • The upgrade of the video for my desktop HP Pavilion Elite HPE-210y PC

    Yes, I have two questions about my PC.

    First, on the technical card for desktop HP Pavilion Elite HPE-210y PC, it shows a power 300 watt yet looking at the minimum requirments for the video card from the factory it require a 400 Watt power supply and the fact of the data sheet does not show the power suppy manufacturer he was wondering has.

    Second, I'm looking to upgrade the video card and I was wondering what the card would be a good replacement for a game without having to replace the power supply but if I have to adapt what power? (With a ceiling of $ 200 - $350 on power supply)

    SCLAW wrote...

    First, on the technical card for desktop HP Pavilion Elite HPE-210y PC, it shows a power 300 watt yet looking at the minimum requirments for the video card from the factory it require a 400 Watt power supply and the fact of the data sheet does not show the power suppy manufacturer he was wondering has.

    Yes, the power is 300 watts. Minimum 400 watts are for full power to retail graphics cards. The map provided by HP was custom designed to meet the requirements of power weaker and is is not the same as a retail card. HP has traditionally used Bestec and Lite-on original UPE.

    SCLAW wrote...

    Second, I'm looking to upgrade the video card and I was wondering what the card would be a good replacement for a game without having to replace the power supply but if I have to adapt what power? (With a ceiling of $ 200 - $350 on power supply)

    To install a gaming grade graphics card, you will need to replace your power supply. The Corsair CX500 and CX600 are highly recommend and forum favorite. Further, these power supplies are only slightly larger than a block of power SUPPLY HP stock and are known to adapt. Power supply Idleness will put you back on the $50 - $75. For useful information on the selection of a graphics card that fits your needs, read Guide of Big_Dave of a discrete video card selection .

    Frank

  • HP Pavilion Elite HPE-450f: HP Pavilion Elite HPE-450f upgrade

    Greetings,

    Just a curious question about upgrading from my HP Pavilion Elite HPE-450f

    I am interested in getting a new video card, high-end and was curious about compatiability with my current card and the motherboard.

    Any help much appreciated.

    Data sheet:

    Mother: MS-7613 (Iona-GL8E)

    Processor: Intel core I7 870

    Memory: 12 GB PC3-8500 (DDR3-1066)

    Video: ATI Radeon HD5770

    OS: Win 7 (64)

    Hello

    Some models of the NVIDIA GTX 660 have a 2 GB memory.  Looking for a map of graphics used on eBay or Amazon. Another solution is to go to the card manufacturer recommendation.

    Thanks for posting on the forum.

  • New video card and memory for my laptop (1410-604)

    Hello

    I think of a new video card and an extra memory...
    What possibilities I have to upgrade my laptop (Satellite 1410-604).

    I checked my computer technical description:
    I think I can add an extra 256 MB SDRAM. But what video card?

    Koen

    Hello guys

    It s not possible to update the graphics card. You can't compare the desktop with a laptop PC. The graphics card on the laptop is a small chip that attaches to the motherboard.

    On the upgrade memory: you can upgrade the memory maximum. 512 MB (2x256MB). There are 2 slots available and these modules of memory are supported:
    PC2100 128 MB (PA3126U - 1 M 12)
    PC2100 256 MB (PA3127U - 1 M 25)

  • Upgrading the video card and, potentially, processor HD 5870 Dell XPS 435 t/9000

    So basically I try to update my video card and possibly my processor a little later, to compete with the next gen game. My specs are AMD HD 5870, intel i7 920, 9 GB RAM, with a PSU 475W. I'm currently looking this R9 x 270. He apparently has the same connection to its use and power than my HD 5870 PIN. Will this work with my computer/motherboard? Can someone confirm this for me? Also looking at this 7950. I wouldn't mind switching to a core of 8 CPUS too if my supply of power/mobo will allow it. in any case, here are links to the 2 video cards in that I was watching. http://www.Newegg.com/product/product.aspx?item=N82E16814150686 http://www.newegg.com/Product/Product.aspx?Item=N82E16814202026 much appreciated on any help with suggestions on a CPU/GFX card =)

    Should be good.  I would like to watch one of these four HERE.

  • HP Pavilion Elite HPE 547c: upgrade graphics card for HP Elite

    I tried to replace/upgrade to update my graphics card for my desktop PC. I tried several video cards, but with each one, once it is installed and the computer turned on, the image does not register with the monitor. Everything else seems to work, but the monitor gives no answer. It was only a problem once the original video card has been removed. The current video card, I am trying to install is the NVIDIA GEFORCE GT 730.

    In the course of the years, I added a memory and the power supply has been upgraded, but all the rest are always original parts (http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/5035344/model/5074426/do...

    Is this a problem with the other parties, who will need to be replaced or is there something else I forget?

    Thank you.

    Hello

    You're dominant, in your case, the most important factor-BIOS compatibility... more recent maps, like the gt730, require the UEFI BIOS to run... you have a LEGACY BIOS system, and cannot do anything, unless you change your motherboard... your pc is a model of early 2011... UEFI standard HP in their systems of end of 2012...

    You can watch other maps, if... the 700 series card youre looking at is a maxwell model 2014... There are in this region that come with a feature of hybrid bios which offers wider compatibility on legacy systems... or you can look at maps more old pascal/fermi architecture that work exclusively on legacy BIOS systems...

    Hope this helps

    This answer solve your message or question?

    If Yes, then share the good news! Inform others that this response was helpful in accepting this solution.
    You can also show your appreciation by giving congratulations.

Maybe you are looking for