video of CTR. Serious media blacked out, win his other works very well, RDO xp 3

Similar Questions

• media center trying too watch the TV, but message says no tuner available to satisfy the request cannot figure out how fix tuner worked very well

  Media Center does not allow me to watch tv message keeps saying no tuner available to satisfy your request, that I have set up signal again that no change was working fine now not at all

  Hi peace1900,

  • You did it any software or changes to the material on the computer recently?
  • When it was working fine the last time?

  Method 1.
  If your computer has installed TV tuner hardware, follow these steps to resolve the error messages so Media Center can use the tuner driver. After each step, Open Media Center and try to view or to set up live TV. Continue following the steps until the error no longer appears and you can watch TV:
  1. If you use a cable of the card and the computer resumes from a standby or standby mode, wait at least 20 seconds before starting any software that uses the tuner, including Windows Media Center.
  2. restart the computer to Resync to Media Center driver:
  a. Click Start.
  b. click on the arrow in the toolbar and then click on restart.
  c. wait that Windows and all startup items load before you open Windows Media Center.
  3. If you have added a new tuner card, make sure that the tuner card is compatible with Windows 7 Premium or Ultimate. Search for certified for Windows 7 on the product packaging or consult the following website to check the compatibility:
  Microsoft support: Windows 7 Hardware Compatibility List (in English)
  4. change the Windows Media Center Receiver Service specific to a Local System account account name:
  a. click Start , and then type Administrative Tools in the start search box. Click on administrative tools in the search results.
  b. double-click on Services .
  c. scroll to the bottom of the list of Services and find Windows Media Center Receiver Service . You may need to expand the name column by dragging the right side of the column heading.
  d. right-click on Windows Media Center Receiver Service and then click Properties .
  e. click the Connection tab , and then select the Local System account .
  f. click apply and then click OK in the message Services.
  g. restart the computer.
  h. click OK again and restart the computer.

  For more information, see the article below:
  http://support.Microsoft.com/kb/929453

  Method 2: Reinstall the drivers for the tuner:
  1. If you have added a TV tuner card separately, install the drivers that came with the tuner.
  2. If your computer came with Windows 7 Premium and a tuner, reinstall the drivers for the tuner. Click Start, all programs, Recovery Manager, and then click Recovery Manager again.
  If you are prompted, click Yes to continue.
  3. in the Recovery Manager screen, click the hardware driver reinstallation and follow the on-screen instructions to restore the tuner driver.

  Method 3: Install the driver from the manufacturer of the tuner tuner updates:
  If you have added a TV tuner card separately, go to the manufacturer's Web site and install the driver for the tuner updates.

  What should I know before adding TV tuners to use with Windows Media Center?
  http://windowshelp.Microsoft.com/Windows/en-us/help/cf0b2d02-c3df-4369-8fed-ce71398cd11f1033.mspx
   
  Solve problems with watching TV on your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/d4dce2d3-0388-43b1-8880-7d6823d0eb9f1033.mspx#EFEAC
   
  Get help for your TV tuner card
  http://windowshelp.Microsoft.com/Windows/en-us/help/d7ef383d-3342-4C8B-b1ce-5ca64891bc381033.mspx
   
  Method 4: use the system restore to the system at a time where the error has not opened. If you are not familiar with the Microsoft System Restore function,
   
  For more information about system restore, see the following links:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
   
  If the system restore does not help to solve the problem, try to uninstall and reinstall the Windows Media Center.
  Method 5.
  Uninstall and reinstall the Windows Media Center:
  Step 1.
  Uninstalling in Windows Media Center:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  2. go to media features and uncheck the brand in the face of Windows Media Center.
  4 restart the computer
  Step 2.
  Reinstall the Windows Media Center:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of Windows Media Center.
  4 restart the computer.
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Week ago when ive never tried to copy the cd on his itunes is very static thought it was itunes but even did the same on media player cant establish it was working very well and not now

  first incounted this week to combat problem so cant there and always the sound of the cd is so static you can't even hear the song thought it was itunes top reading but it does the same thing on media player

  10.7 installed ITunes and no sound problem.

  Because WMP is also affected, I'd say it's a hardware problem. Start by disconnecting all the microphones, speakers, actually any device off-board you have. Then run a Cd or RIP something.
  If the sound is better, connect the devices one by one until you guilty findnthe.
  See you soon,.
  Jerry

• Why some youtube videos appears a white screen with sound only, while other just work very well, these videos streaming without any problem

  Why some youtube videos show a white screen with sound only, while other works very well, these streaming videos without any problem on youtube no black screen, nothing, but sometimes once downloaded, they appear black screen with sound only? Yes sometimes when you re-download it works very well, but why?

  Hello

  (1) did you make any changes before the show?

  (2) you use internet explore? If so, which version?

  (3) is the specific question of youtube videos?

  (4) the same thing happens with the different browsers?

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  For reference:

  Why a few blank pages or incorrectly displayed in Internet Explorer?

  http://Windows.Microsoft.com/en-us/Windows7/webpages-look-incorrect-in-Internet-Explorer

  I hope this helps.

• Use Firefox with flash 10.3.183.75 20.0.1, can not see the video if its built-in Flash. Can see perfectly if they are not incorporated. Chrome works very well.

  http://64.165.34.7:8134 / videoplayer3.html works well, but http://64.165.34.7:8134 / flash_ready.html does not load video in Firefox (black screen with the plug-in is needed, when you try to install "couldn't find any plugin"). Chrome works very well. IE shows an outline of the flan.

  flash_ready.html
  <!DOCTYPE html>
      <html>
          <head runat="server">
              <title>
                  HTML5 sample video player
              </title>
  </head>
  <body>
   <form id="Schedule" runat="server">
      <div >
  	  <EMBED height=500 width=700 src=http://64.165.34.7:8134/videoplayer3.html allowscriptaccess="always" wmode="transparent" allowFullScreen="true">
          </EMBED>
  		</div>
  		</form>
  </body>
  </html>
  
  videoplayer3.html
  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
  <html xmlns="http://www.w3.org/1999/xhtml">
  <head>
  <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
  <title>Sample HTML5 Video player</title>
  
  </head>
  
  <body>
  
  <h1>Sample HTML5 Video player demo</h1>
  
  <object type="application/x-shockwave-flash" data="http://flashfox.googlecode.com/svn/trunk/flashfox.swf" width="640" height="360">
  	<param name="movie" value="http://flashfox.googlecode.com/svn/trunk/flashfox.swf" />
  	<param name="allowFullScreen" value="true" />
  	<param name="wmode" value="transparent" />
  	<param name="flashVars" value="controls=true&amp;poster=http%3A%2F%2Fsandbox.thewikies.com%2Fvfe-generator%2Fimages%2Fbig-buck-bunny_poster.jpg&amp;src=http%3A%2F%2Fclips.vorwaerts-gmbh.de%2Fbig_buck_bunny.mp4" />
  	<img alt="Big Buck Bunny" src="http://sandbox.thewikies.com/vfe-generator/images/big-buck-bunny_poster.jpg" width="640" height="360" title="No video playback capabilities, please download the video below" />
  </object>
  <p>
  	<strong>Download video:</strong> <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.mp4">MP4 format</a> | <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.ogv">Ogg format</a> | <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.webm">WebM format</a>
  </p>
  </body>
  </html>

  I used this instead of < embed >. He began working

  < object type = "text/html" data = "http://64.165.34.7:8134 / videoplayer3.html" style = "width: 460px;" "height: 260px" > < / object >

• I synced with my Iphone 6 various collections and works very well. Question: is there a way to get out of the photos from my phone to TV via Apple TV? Camera does this but not Lightroom app.

  I synced with my Iphone 6 various collections and works very well. Question: is there a way to get out of the photos from my phone to TV via Apple TV? Camera does this but not the App mobile Lightroom Dave

  Hello

  There is no feature that can do this in Lightroom Mobile from now.

  You can post your comments/idea here Photoshop community customer family

  Thank you

• Hello, I need help, I can't play the video using Facebook. Works very well in Youtube. I use Safari. Tried different solutions such as changing preferences, reinstalling Flash.

  Hello, I need help, I can't play the video using Facebook. Works very well in Youtube. I use Safari. Tried different solutions such as changing preferences, reinstalling Flash.

  Hello

  Please try following the steps and see if it helps

  1. Please work through this guide.

  https://helpx.Adobe.com/Flash-Player/KB/video-playback-issues.html

  Follow the instructions in the guide on the provision of the dxdiag report and additional information on what you tested and observed.

  2 turn off hardware acceleration in the settings. Steps are mentioned in the link below

  How to disable or enable hardware acceleration?

  Thank you

• Why Windows seems to work very well, but Windows Media Center not?

  Hello

  Today, I was with my Home Theater PC (HTPC) to record TV. Everything worked well. I wanted to watch a YouTube video when I was recording was completed. When I went on YouTube, there was no audio data.

  I use a HDMI from the HTPC to connect to my Pioneer VSX-50. While watching the TV show, the VSX-50 would show he was getting audio to 5.1 channels as it should. When I go on YouTube, all the sound elements would not pass, no audio signal is sent to the VSX-50.

  So I had a slight problem when it seems that Windows and Windows Media Center try to run the sound completely different from each other. And I went to my "manage Audio Devices" set up so that Windows would go the 5.1 audio channels (I think that until then he was established as stereo?). Once I did, I was able to get a YouTube sound very well. Then I went back to Windows Media Center. Media Center at the start, that's fine, but when I try to watch live TV or any recording, sound glitches (she repeats a second 1 loop repeatedly while video continues to play as if it's good), then he falls all together. After the sound glitch, my VSX-50 shows no audio signal is sent to the receiver, and I can't he come back! It really frustrates me!

  Any ideas?
  -Andrew

  Hi André,.

  Visit this link, it worked for me.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center

• B209-a will not print black, but all other colors, including gray work very well

  When I try to print, all the colors, including gray, print very well, but black does not print.  I tried two new cartridges which do not solve the problem.  Also, I rebooted the computer and the printer and clean the print head.  Printer has two years.  Any ideas for troubleshooting?  I'm on Mac OS X Lion (10.7.5) thank you.

  He has not worked for me, but I thank you for your response.  Looks like it's maybe time for a new printer

• Media Center on Win 7 "stopped working".

  Bought this new computer with Win 7 in July, 10.  Media Center has worked, (like my old pc) until this last week.  Yet the recordings of TV programs I get RoadRunner cable, but won't let me play same.  I get the msg: WMC has stopped working.  The choices are "to search the solution over the internet" and "close".  That I see, nothing happens when I select the first Pope and WMC turns off.  MSG, basically, has the following listed (?): CLR20r3, ehshell.exe, 6.1.7600.16385, 4a5bccdc, mscorlib, 2.0.0.0, 4bebd50b, f50, 7, N3CTRYE2KN3C34SGL4ZQYRBFTE4MI3NB, 6.1.7600.2.0.0.768.3, 1033 (hope, I just copied correctly - what it means).

  I was able to play a few shows previously recorded by restarting the pc, then selecting a show and play.  Three light like that, but now I can't screen "msg".

  I think MC is still able to record.  I always get the guide, live tv, etc.  At least the last time I tried the ones I did.

  But I can't play what has been saved!

  If anyone has a solution, please send me an email to * address email is removed from the privacy * that an ad has been filed.

  
  You has not, coincidentally, happens to record last Friday (I think it is?) episode of human target (what happened to be replaced by a House reruns), did you?
  Reason I ask: it has been a little traffic on to thegreenbutton on the subject these days - and everyone who reported also arrived to try to save human target.  Somehow, the file finished with metadata is corrupted, what makes MC crash when you enter recorded TV (at best, it crashes when you select the program from the list.)
  FIX: Open Explorer and go to C:\users\Public\Recorded TV.  Find and remove "human Target__"(exemple: «La Target_WDIVDT_2010_10_01».) ".
  Start Media Center, and then try again.  Fixed?

  HTH,
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Media Player 11 has stopped playing my Avi files worked very well. Tells me I have a sound card problem, but I don't have as much as I can see.

  Same videos work in Gom and Vlc but not in Media Player 11.  I followed the recommendation of the error and I checked the Device Manager... no question there and not even the latest drivers dowlaoded no help.
  With the help of Sound Blaster Audigy 2 ZS.  Win XP Svc Pack 3.
  Anyone with ideas.  Audio also works fine in WINAMP.

  Try installing the latest Codec.

  Please click on the link below to download:

  http://www.free-codecs.com/download/K_lite_codec_pack.htm MOEEN AJAZ KHAN MD - MCP/N + / A +.

• YouTube and WebMs are weird when trying to play automatically (details inside), but using Flash to load videos on websites like DailyMotion works very well.

  It started a few days ago, possibly coinciding with the update to 41.0.1.

  If I upload a video on Youtube, or load a WebM, the video shows that it is set to 'play', as it is supposed to and it loads as usual, but does not in fact, time just 0:00. If I pause and re-activate it or move the timer, he plays as usual. Also, if I load a Youtube video from a referral link on the page of a video that I've played, this happens. This does not happen on sites like DailyMotion who only use Flash instead of HTML5.

  Is there a solution for this? Even if I had to force Youtube to play with Flash instead of HTML5, it won't fix problems with WebMs.

  My Extension configuration is the following:

  • Custom new tab 2.1.1
  • Extension of the 3.0.12.1.1 Dictionary
  • Download Manager Tweak 1.0.9.1
  • Download Youtube videos to MP4 1.8.3.1
  • DownloadThemAll! 2.0.18.1
  • HTTPS everywhere 5.1.1
  • Mega 3.1.19
  • Multiply ++
  • Tab new substitution 1.0
  • NoScript 2.6.9.38
  • Overview of ratings for Youtube 4.1.2.1
  • uBlock origin 1.2.1
  • Undo close tab replacement 8
  • YouTube mp3 1.0.9.1

  My Plugin configuration is the following:

  • Video codec OpenH264 by Cisco - always activate
  • Contents decryption module Primetime by Adobe - always activate
  • Google update - request activate
  • Java Deployment Toolkit 8.0.600.27 - ask to activate
  • The Platform Java SE 8 U60 - ask to activate
  • Microsoft Office 2010 (authorization of agents) - ask to activate
  • Microsoft Office 2010 (open and edit files) - ask to activate
  • NEXON game controller - ask to activate
  • Raidcall plugin - ask to activate
  • Shockwave Flash 19.0.0.185 - ask to activate
  • SumatraPDF Browser Plugin - ask to activate
  • Windows Activation Technologies - ask to activate

  Thank you

  You disable autoplay in HTML5 Media Player or include the extension of the media files that blocks?

  You can check this pref and other media prefs on the topic: config page:

  • Media.AutoPlay.Enabled

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• New and other history videos will not play in Firefox for java, adobe and Yahoo v20.0.1 are underway. All I get is a circle that circulate, videoes work very well in IE9.

  All plug-ins are up-to-date and current, have disabled and checked for problem of plug-ins with no result. I've uninstalled and reinstalled Firefox, Java, Adobe Flash Player, Real Player, several times with no results. Also uninstalled my software antivirus temporarily without any result.

  Problem solved! I downloaded and installed Firefox 24.0 Beta. Apparently Mozilla team programming carried out all the changes right in the new version. Now all the videos from Yahoo and BBC working.

  Link: http://www.mozilla.org/en-US/firefox/channel/#beta

• Black screen during the connection (Vista) very well in safe mode...

  OK, so yesterday I run my registry any clean my computer was fine... when I turned on it today it says windows had not been turned off correctly and to check for errors... I looked at this process as I always do, as it is rare for this to happen. I noticed that he began scanning of files obtained in about 8000-9000 and began to repeat the sweep of 8000-9000 repeatidly files as if stuck. All of a sudden he jumped past and began to say something on the amendment of security for these files or something (I'm not completely computer literate so I did not understand what he was saying). Ive read about 1000 pages on the internet and they are able to get the Task Manager in regular mode (which I can't) or used a malware FVIIland been fine... Im stuck about what should my computer for Friday run applications of uni and I'm all that hair out as I'm going bald and I shaved my head yesterday... Help, please.

  Thanks in advance for the answers,

  Jahsus.

  The game, January 13, 2011 12:06:36 + 0000, Jahsus wrote:

  OK, so yesterday I run my registry clean my computer was fine

  You run a registry cleaner a week? You play with fire. You
  should never run it.

  Registry cleaning programs are all snake oil. Cleaning of the
  registration is not necessary and is dangerous. Let alone register and
  do not use any registry cleaner. Despite what many people think, and
  What software record cleaning suppliers are trying to convince you,
  have unused registry entries is not really make you hurt.
  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.
  Read http://www.edbott.com/weblog/archives/000643.html

  and http://aumha.net/viewtopic.php?t=28099

  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.

  Ken Blake (MS-MVP)

• I have a photosmart b210 which began printing all my black in gray, the color is very well

  My photosmart started printing any black ink in gray scale. the color is fine, but it's boring. I did matenence, such as cleaning the printheads, printer status report, report print quality (and that was even printed in dark gray)... what should I do?

  OK, let me clarify:

  • Black ink is not used when printing on Photo paper, because it is pigmented and not compatible with shiny media.
  • The most likely issue is having the vents blocked as described in the link I gave you a link.  My post in the link "soak the printhead" told to check first the items displayed in the link, that includes details of the ink level checking and vents are clear.
  • Another likely possibility is the use of third party inks.  Using HP replacement ink ink or a third party?
  • If you do not want to follow the suggestions here then Contact HP for warranty repair.  If you use third party, that repairs are not likely to be covered, ink HP accepts no liability for the quality of third party products.