Video output port does not work on Tecra 8000

Similar Questions

• S-Video port does not work on Tecra M5

  Hello. S-Video on my laptop M5 port does not work. I checked everything Svideo cable, TV and also the drivers. Everything works fine. Could you advise me please? How can BTW, I check the Svideo port?

  Hello

  There is not much to do
  (1) Please make sure you use a S-video S-video cable and connect it to the TV
  (2) turn on the S-video TV port - VERY IMPORTANT
  (3) use the FN + F5 key combination to switch to TV

  All that s!

• USB port does not work on Tecra M3

  I need assistance with my Tecra M3 USB issues.

  It has 2 USB ports. Awhile back, the USB ports refused to recognize USB keys without driver (I don't have any driver needed to try sticks).

  Recently I had to reinstall my modem ADSL from Siemens, etc. pilot that runs via a USB - connection to the LAN 2 then WAN miniport. And now a problem.

  1. the Modem LED told me that she has the power (it's a modem off - Siemens-C100-1)
  2. the link that LED holds for about 10 minutes (while I am online) then turns off (although the properties of connections tell me that they are always connected)
  3. other equipment - printer etc. which is powered through the OK USBs.
  4. the modem seems to work ok because I can use it with an iBook without problems.

  This would be a problem of USB driver? How will I know? If so how can I solve this problem?

  Thank you

  Hello

  Don t think that the malfunctioning of USP ports or are defective.
  It seems that another USB device works correctly. Or am I wrong?

  You can first try to remove all the USB ports on the Device Manager.
  Then restart the laptop and install the ports again! (By the way; after new reboot of the operating system automatically recognizes the USB ports)

  Disable the option on all ports of the USP of energy saving, then try to connect the USB again!

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• HP 15-AF006AX: USB 2.0 port does not work

  Hello

  I installed window 7 in my new laptop, but the usb port does not work in the case of data transfer.

  and I am not finding a driver for this, can you help me for this problem

  Thanks in advance

  Hello:

  The only suggestion I can offer would be to settle the AMD Chipset drivers from the link below the problem.

  You want the first file on the Web page.  Install and reboot the PC.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• El Capitan USB port does not worked well under Yosemite.

  Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
  Has worked perfectly under Yosemite unfortunately too long to go back.

  The USB port does not work with other USB devices?

  I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary.

  http://arstechnica.co.UK/Apple/2015/09/OS-x-10-11-El-Capitan-the-Ars-Technica-re view/8 / #h1

• my video and streaming does not work correctly, always stop.

  my video and streaming does not work properly, his game and stops all the time.

  Hello

  1. this happens when you play movies or videos saved on the computer?

  I suggest you to follow these steps and check if that helps.

  Method 1:

  If this happens when you stream or watching videos online, then I suggest you day flash player latest version and check if it helps:

  http://get.Adobe.com/flashplayer/

  Method 2:

  If the problem occurs even when you try to play the recorded video on the computer, then try to update the latest drivers for the video card and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more information, see this link:

  http://support.Microsoft.com/kb/2532294

  It will be useful.

• HDMI port does not work

  Original title: HDMI port stopped working after the update.

  This morning my laptop did an automatic restart to install updates and now my hdmi port does not work. I tried to restore the system to a previous point, but that has not helped. I have a HP Pavilion dv6.

  I worked with a team of online crash analysis and they had update me of the BIOS. That fixed the problem and the HDMI port is now working again. For those of you who have the same problem, go to http://ftp.hp.com/pub/softpaq/sp48501-49000/sp48953.exe .

  Update your BIOS can help you too.

• HDMI port does not work after you refresh the computer.

  Updated my computer and now my HDMI port does not work. I can not connect my labtop to TV.

  Are you sure that the additional monitor is turned on.  Try holding down the and then press P until it is selected to extend the screens.

  If this does not work, go to your computer manufacturer's website and download and install the latest version of your graphics drivers.

• Problem - VGA output VGA or HDMI port does not work when the connection to the input of your TV

  Problem of VGA output - using an acer aspire 5520-5912 trying to connect it to the TV input - connect S-Video works well - port however VGA or HDMI does not work - 1 when I plug the VGA cable that goes to an entry of RD Gr Bl on TV, my screen goes black - as soon as I unplug the cable and press FN + F5 I get the screen back - if I restart the computer in order to have the computer to identify the external screen it will just a black screen when the priming. Troubleshooting using no external monitor is identified unless I use the S-video connection.  The Hdmi connection gives me the same result that the VGA - convenience store attempt will identify the computer screen.  OPSYS Vista. Thank you

  Hi cdk14031

  
  You have set display up-to-date drivers installed?

   

  Step 1 :
  To resolve the problem, you can check if the uninstall and reinstall so help display drivers.
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Step 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

   

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  You can also check the support link and check if these help - below

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  I hope this helps.

• OUTPUT HDMI DOES NOT WORK

  my my laptop than Gateway M-7818U hdmi device does not work when I connected to LCD TV, it worked before, outputs tv work fine, when I get the hdmi cable into the computer make a noise, but when I used the function to toggle the display of the tv are not acknowledged the connection.

  Hello

  There seems to be a problem with the cable or port; It would be better to contact the computer manufacturer for assistance.

  To check if the problem is with cord or not, you will need to connect the cord on another laptop and check.

  And also try to update the video driver and check if it helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope the information is useful.

• iPhone headphone output port IS not working do not

  helmet SE iPhone does not work. Bought new Apple earbuds and determined this is the port the atria. Phone is only a few months old. Help, please?

  This morning, I installed the last 6update iPhone: iOS10.0.2

  My headphone stopped working this afternoon (after a few hours of use).

  I couldn't understand anything to make them work again. Returned and the phone and the headset are working again.

  Update Nevermind the last version of iTunes Music *. Each update is a version longer than music/iTunes

• A 'Powered USB Port' does not work on Mac Mini

  I have an external POWERED USB multiport block. When I plug the Superdrive into a Port powered on the unit, which of course is connected to my Mac Mini (2012) the Superdrive not even she acts as if it is connected and will not accept a disc. All ports are USB 3.0. I'm so uncertain that the Superdrive will work on any USB port other than the one on the Mac itself. Any advice? I El Capitan installed, but it has worked that way before the upgrade.

  This specific USB 3 hub? Not all work with the Mini

  Hub USB 3.0, attached to a Mac Mini does not work

  Re: Is there a USB 3.0 Hub that really works with the Mac Mini?

• Download video real player does not work in firefox v29.0.1 what should I do?

  I have firefox v29 and download real player does not work. What I would do. This option is enabled and the realplayer options are correctly set

  Most of the time after the release of a new version of Firefox, the modules can become inconsistent. It's the developer to solve these problems and update accordingly. You can contact the developer of their modules page.

  You can try to contact the RealPlayer support to see if they have any patches

  • http://www.real.com/support

  You can also use an alternative to RealPlayer (if you use it to download videos). These are based on the web and I'll give a few extensions so

  • http://Keepvid.com/
  • http://www.ClipConverter.cc/
  • http://en.SaveFrom.NET/

  I use it every day and they work great.
  Here are a few extensions

  • Download Flash and video
  • Video DownloadHelper
  • Flash Video Downloader
  • 1. click on download YouTube Video