Video problem on Qosmio F50 - 10K

Hello
I connected my Qosmio F50 on a projector and watched a few movies and everything worked fine. But when I started playing an EA Sports NBA 2008 the system has collapsed and the image of the screen and the missing projector.

I rebooted and tried again but after 10-15 minutes it collapsed again. I installed the latest version of the graphics driver nvidia a few days ago. Any help is appreciated, sorry for the bad English.

> monitor and projector
Can you please explain what exactly do you do?
Choose a single device (monitor or projector) and test again.

I hope you didn't just try to see the same image (cloned) on three different screens.

Tags: Toshiba

Similar Questions

  • Qosmio F50 - 10K - multimedia keys are not lit

    According to my topic

    "" Qosmio F50 - 10K - replaced by Qosmio F60-126? ".
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59934&TSTART=0

    I had problems with my laptop, located at the Nvidia 9600 M GT graphics according to Toshiba service. They changed the graphics card with a new one today and so far everything is going very well and smooth. He collapsed again. Time will tell whether or not it returns to his old ways.

    In any case, after I took up my F50 - 10K I noticed that the indicators for media buttons (Play / Pause, Stop, Dolby, etc) are not lit. The buttons work fine, but they are not on. All other indicators (the light bar on the touchpad, the volume light) and the power light work fine. There is a button to deactivate/activate the indicators, but it does not work for media indicators.

    Before giving my laptop to the service of all the indicators were at work. Now, the indicators of media came out. No idea how to re-enable?

    Hi Jwrath,

    I doubt s a hardware problem because they do not work properly and the lit / functions are controlled by added value package. In your case, I recommend reinstall Toshiba Value added Package from the official website of Toshiba:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Remove the VAP, restart the computer and install the new VAP software.

    In addition, check the BIOS. I don't know if there is an option for Mr. lighting if so, enable it and that s.

  • Qosmio F50 - 10K: Fingerprint Reader question - sensor cannot be started

    Dear Sirs,

    I have a problem with my fingerprint reader.
    I just re-formatted my new laptop which is only 4 days old. I have a Qosmio F50 - 10K.

    I uninstalled Trueaccess Manager software several times and installed the latest version of the software from the site of EU from toshiba.

    I also used CCleaner to clean the registry.
    I always get an error indicating the sensor cannot be started.

    Can someone help me please?

    Thank you
    Danielsam

    If I remember well with fingerprint sensor small tutorial that will explain exactly how to do this and you can also practice how to remove the finger on the right track to successful fingerprint registration.

    To be honest, I can't imagine that there is something wrong with the software. Do a little test and let someone else to record fingerprints.

  • Perhaps a mistake: Qosmio F50 - 10K with nvidia 9600?

    Perhaps a mistake: Qosmio F50 - 10K with nvidia 9600?

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=1055757

    Is the graphics engine NVIDIA GeForce 9700 M GTS model Qosmio F50 - 10K? like here:

    http://explore.Toshiba.com/laptops/Qosmio/F50/F55-Q503

    Sorry for my English, I m of Spain

    Hello
    Toshiba Qosmio F50 sold in europe and just like that: -.

    Qosmio F50-10 b: GeForce 9700M GTS GDDR3
    Qosmio F50 - 10K: {color: #ff0000} GeForce 9600 M GT GDDR2
    {color} Qosmio F50-108: GeForce 9700M GTS GDDR3
    Qosmio F50 - 10G: GeForce 9700M GTS GDDR3

    and Toshiba Qosmio F55 sold in the United States just like that: -.

    Qosmio F55-Q502: GeForce 9700M GTS GDDR3
    Qosmio F55-Q503: GeForce 9700M GTS GDDR3

    F50 for europe only, F55 for U.S. only

    I hope this will help

    Kind regards
    Reaver

  • Weird problem with Qosmio F50-108 - power power button

    Hello

    I have strange problem with button / stop on Toshiba Qosmio F50-108 - pressing the power button won't start the computer. Now, the computer starts only when I press the first button to the right of the power button (Toshiba button Support).

    It's as if the buttons have been activated. The power button is still able to stop the laptop or put on standby when you press on, but it no longer starts. Recently, I had my laptop on the service, but I put t know if it has been opened or not. Is it possible that the problem is hardware related or is - this serious just of system configuration? It would help if I Flash the BIOS? Otherwise I will take to the service again.

    Thank you for the answers!

    Hello

    If the laptop was on the service, please call them and explain the situation. Start button / stop is only the button that can be used for the specification of switching on and, as far as I know, it cannot be changed with certain parameters.

    I assume that there must be a contact problem.

    Call and see what they say on this subject.

  • Qosmio F50 - 10K - replaced by Qosmio F60-126?

    According to reports from Toshiba, laptop model F50 - 10 K is removed and replaced with F60 - 126.

    I would like to know why.

    Hello

    I think Toshiba only knows the exact answer, but I can say that all Qosmio F50 have been replaced by new Toshiba Qosmio F60 series. Latter has a new design with newer and more powerful hardware, it s cutting edge design and material.
    This normal behavior from time to time some laptop models will be replaced by new ones.

    Are you not satisfied with your F50? I mean s still a great piece of hardware ;)

  • How to get Vista 64 Bit from Toshiba Qosmio F50 - 10K-

    Hello

    A few days ago, I bought Qosmio F50 - 10 K but with Vista Ultimate 32 Bit.
    It does not satisfy me
    Does anyone know how to get Vista Ultimate 64 Bit from Toshiba?

    This version has been developed for the Poland, but in this country there is no office representative or something like that. There are only distributors or shops who import laptops of distributors abroad.

    Hello

    You won't get a Toshiba 64-bit Vista.
    What you can do is to buy the operating system Vista 64 bit full, original and reinstall instead of Vista 32-bit, which is already installed on your laptop.

    I think 64-bit drivers for Toshiba Qosmio F50 Vista can be downloaded from the European driver Toshiba page!

    Good bye

  • Qosmio F50 - 10K - problem graphics card while playing some games

    Hello ppl

    1. I have a problem with the video card: 9600 M GT.
    I play Word of Warcraft or the need for speed carbon, from time to time and after 1 h - 0, 30 h (even 10 minutes) of game - the system hangs.
    Black screen and I need to restart the system. I have the latest drivers installed, the newer bios, nvidia latest.

    2. when I play music with winamp or media player or another player at any time the system crashes during 2-3 seconds.

    3. the laptop came with a preinstalled OS Vista Ultimate x 86. Can I migrate to Vista Ultimate x 64 OS without any other charges? If a person of Toshiba reads my thread: I already talked with Microsoft and they told me that I have the cd - key should work on x 64, but I need the OS from Toshiba.

    Please tell me if there is a way to solve these problems

    Thank you!

    I have same problem, used to play nba08 and after half a hour system breaks down, also tried with the toshiba display driver, with the nvidia display driver. seems to me that it is a serious mistake of toshiba to let that happen. so expensive laptop and a such rap c.

  • Problem with Qosmio F50 - 10G

    Hi all, I've had this laptop for over 4 years now and the problems started about a year at the time where the laptop started to close shortly after throwing a heavy game.

    Since then, it has progressed to the point that its closure when I run any game. A temporary solution I used was to disable the video card that has stopped closing down because the computer did not as overheated as before and so I resorted to games that didn't take a lot of graphics memory.

    In any case, since the last week or so the laptop fan started making loud grinding and the roar of noise (change back and forth between the two). During the whirring noise, windows download hanged and when it goes back to the grinding noise the laptop becomes ok.

    But overall, I observed a slowdown and the fact remains that my laptop is overheating and shuts down if I turn on the video card (Yes, now just turn on the video card is enough, games is not necessary).

    Any help that the community can suggest? Thank you

    Also, is there a guide somewhere on how to open this model so that I can try and clean the fan? I can't find a guide for this model anywhere.

  • Qosmio F50 - 10K - Microphone is weak and some generating noise

    Everything was ok with my microphone on F50, but recently, I noticed that it is defective. It is quite weak and producting some noise. No experience?

    Did you check the audio and settings in Realtek HD sound Manager?
    You can change the volume of the microphone see.

    In this program you have this problem? AFAIK in Skype, you can also change the settings for the microphone.

  • Problem Bluetooth - Qosmio F50 - 10Z

    Well, my pc is fresh out of the box, everything works fine.
    The other day I opened the laptop and I wanted to send some pictures of my mobile on the pc via bluetooth, and I kept getting a message to obsurd saying "bluetooth is not ready." I tried changing various settings to see if there was something wrong. Turned the radio on and off.
    So I downloaded the latest driver on the toshiba site.


    But I relaised there was something missing... Just below the batteries there was formerly a section "Bluetooth."

    And I tried to open the program with the new driver, but nothing happens...?

    Anyone know a solution to this.
    Any help is very appreciated.

    Hello

    I posted this in another thread, but I'll do that here too:

    There is a new version of battery available Bluetooth.
    http://APS2.toshiba-tro.de/Bluetooth/?page=download

    But before install you it I recommend to remove the old battery installation BT.
    After removing the battery of BT, reboot the laptop and follow the BT facility.

    Installation should finish correctly and then you can activate using the FN + F8 keys.

  • Problem USB Qosmio F60 - 10K

    Hello
    .. .and all usb ports suddenly decided to not recognize whatever it is attached as a mouse, external HARD drive. The funny thing is that ports are in fact alive since they provide the power and they appear in the Device Manager window.

    I tried the following

    (1) update the BIOS
    2) updated the chipset
    (3) checked the plug-and-play service
    (3) uninstalled usb ports and installed their return
    (4) disconnected devices and plugged their new
    (5) disconnected power cord and battery and plugged them back
    (6) check the external devices, has worked on another PC
    (7) prayed for divine intervention

    None of the above has worked

    Everybody out there to help?

    Thanks in advance

    Hello

    Everything you tried is right. as a final step, try the magic solution that helps to install OS original Toshiba recovery to help image.

  • Qosmio F50 - 10K - Atheros Wifi & Touch pad drivers for Win7?

    Hello

    Could you please tell us when will we be able to download Win7 drivers for Atheros wifi cards & Touch pad devices? I check the box "Download drivers" daily, but the drivers for these two devices are not yet published...
    Also please provide some information about the BIOS - is there need for specific adaptations for better compatibility with Win7? You will soon release the update of BIOS for Win7?

    Thanks in advance for your answers!

    Check it please for WLAN driver Toshiba WLAN http://aps2.toshiba-tro.de/wlan/ Portal
    For the touchpad, you can try to use the Vista drivers. It works fine on my Win7 preinstalled Satellite A500.

  • Qosmio F50-114 - how to use the video cable?

    Hello
    I have a Qosmio F50-114.
    I want to capture video via the video cable supplied with the computer.

    The computer came with a video component cable software plug-in (1 x 3, 5mm - 3xRCA white/red/yellow). The only place in the manual stating that cable is the only a-in-the-box-section.

    On my old Qosmio F20, I had a specific connector for the video cable component software plug-in. There is no specific 3, 5mm connector so I suspect that I have to join one of the IR ports, or one of the audio-connectors (?).

    Looking forward to a response.
    / Daniel

    Hey,.

    Don t get me wrong, but I'm 99.9% sure that there is no video port on Qosmio F50. As far as I know that these books are not available, they have a video output only, port but not port of entry to capture video.
    So you mixed up something I think

    What you may be hearing is integrated TV Tuner, but on this port you can only record videos from DVB - T signal.

  • Qosmio F50 - graphics card may not be recognized under 64-bit Windows

    I installed the operating system Windows XP 64 on Toshiba Qosmio F50 - 10K. I have a big problem, because Windows XP does not recognize my graphics card (nvidia geforce 9600 m gt).
    I tried to install the drivers from the nvidia site, but once this graphics card still has not been recognized.
    It causes that, when I try to push and drag a window, I can see how it is re-paint.

    Could someone help me to solve my problem?

    Hello!

    I think that the problem cannot be solved. Toshiba doesn't support any laptop computer with Windows XP 64-bit because it is OS was not so popular.

    The only way I know is to use drivers from external Web sites and update your BIOS to the latest version. If it doesn't work, you must use another operating system.

    I think that the Qosmio F50 is really fast enough for Vista 64-bit. Try it and you will see too much work.

    Good bye

Maybe you are looking for

  • I can't sign in iCloud currently on my MacBook Air?

    I can't sign in iCloud right now (on my MacBook Air) work other devices 2 i-phone. any suggestions? Thank you

  • Save the change on issue close

    Hi all, I searched around the forum for an answer but couldn't find one. I have problem with is basically, I can't get rid of the recording of the dialogue changes when the application closes. Many people suggested using a variant of: public boolean

  • IOS upgrade question

    Hello I have cisco WS-C2960-24TC-L, I tried to update the IOS of to , but it did not work with the new IOS, so I drove back to the former once again, what can cause this problem and what is the upgrade procedures?

  • Dual LUN T60p w/ATI Mobility FireGL V5250 gets BSOD code recovery mode standby/hib 0x7F(0xd,0x0,0x0,0x0)

    I recently added a monitor to my T60p.  The video is an ATI Mobility FireGL V5250 with 512 MB of video RAM.  With ATI and the original BIOS drivers, there is a refresh very noticeable flicker tear occurring on the external monitor.  I tried to update

  • Adobe update [iOS]

    Adobe did an update, but this version is very annoying. Anyone know how I can revert to the last version? I have an ipad. If possible, I will be very happy! THX!