Video signal splitter unrecognized DVI - two different devices! Why?

Similar Questions

• With the help of two different devices for VDR to save the same virtual machines

  Hello

  I have VDR backup right now most of my virtual machines. I'm experimenting with some recovery scenarios disaster using VDR. I want to set up a new device, backup virtual machines themselves, but with a destination off. My question is, it would cause problems to have two different devices, backup the same virtual machines?

  I'm asking this is because I was looking at the notes of recent VMworld session on VDR and he says, regarding a troubleshooting scenario in which you must create a new device in addition to your current device, both devices back up the same virtual machines do not.

  If it is dangerous to do so because of the likelihood that two devices can save the same virtual machines at the same time, I could schedule the backup windows at different times to avoid this problem.

  Anyone have any ideas?

  I create a second local camera vDR and vDR distance and test it against a test VM. The vDR devices will have their own CBT files for each virtual computer, so they should be able to work together, but I would like to go through tests to see how they work well on the WAN. Make sure that you can transfer enough data to host daily data change.

• How to install photoshop in two different devices

  I bought the package of Adobe Photoshop CC (2015) with Adobe Lightroom (2015). I could place it in a mac pro computer but when I place it on my iMac, he says it will end after 30 days. I know that I can use the program for three different devices. Please advice...

  After installation, you can sign in as needed.

  Download the application of CC Office in good Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial

• Two different processors in Vista on the Satellite M-series(1M8) Device Manager

  I have two different processors in the vista Device Manager:
  first pilot intel core 2 Duo T7100 and second Core 2 Duo T7700

  What this means and how do I use it?

  Thanks Klaaus

  Hello

  This is a bug of Vista ;)
  Just remove the processors the Device Manager and reboot the laptop.
  After the restart new Vista should recognize and refresh the information in the CPU.

  Best regards

• Device Manager shows two different processors on Satellite P200 - 1 K 9

  Hello
  I just bought P200 - 1 K 9 and spotted (Vista 32-bit) Device Manager shows two different processors under the section of processors:

  Intel Core 2 Duo CPU T7300 @ 2.00GHz
  Intel Core 2 Duo T7700 @ 2.40 GHz CPU

  I expected to see the two excatly the same processors here.

  Vista recognizes in general CPU core 2 duo 2.4 GHz, BIOS too.
  What is on the Device Manager?

  Is there something wrong with the CPU? Should I return it better?
  Would you please check your processor in Device Manager (start-> right click on computer-> select Properties-> Device Manager) and let me know what you have?

  I'll start some live linux CD and check there too.

  Thank you
  Miroslaw

  Hi mate,

  the you´ve got problem is not a problem. It s just a simple bug in the Vista Device Manager and hardware abstraction layer.
  Follow these steps:
  Remove the CPU from the Device Manager (uninstall just like any other device) and then restart windows. The processor will be indicated correctly next time you reboot the system.

  Welcome them

• I added two different playlists music videos of You Tube and now I can't find them

  I added two different playlists music videos of You Tube and now I can't find them anywhere. Where are these files? On you tube to bottom videos add a tab saying. When I clicked on this tab, it says Favorites or playlists. This is where I put two different playlists. Can someone help me know where are these playlists. I did the obvious and looked into: eMusic and windows media player.

  Hello Mike,.

  I would recommend looking at the help page of Youtube for assistance with this issue:
  http://www.Google.com/support/YouTube/bin/static.py?p=homepage&page=start.cs&HL=en_US

• Hello. Editor of newbie here. If I split a video file into two clips in Premiere Pro and you want then save each one as a different file while exporting to the encoder, how to make sure that they are registered in the form of two different with different

  Hello. Editor of newbie here. If I split a video file into two clips in Premiere Pro and you want then save each one as a different file while exporting to the encoder, how to make sure that they are registered in the form of two different files with different after encoding names?

  Located in and out on a section and that export brands.

  .. .Rinse and repeat for the other section.

  Name each section and where it is exported to separately... and as you wish

• How to connect Apple TV to two different amplifiers?

  How to connect Apple TV to two different amplifiers?

  If you're talking about AppleTV 4 then there a single HDMI output only.

  You need either a HDMI switch or a divisor of direct HDMI to different amps (may not work at the same time due to HDCP) or see if an amp offers HDMI or optical output to the other depending on whether or not you want to distribute audio or video to the 2 amp.

  If you need a splitter/switch, it's an extra box and you might consider only 2 AppleTV, don't forget a rental on one will not be seen on the other.

• Is it possible to route signals of relaxation between two chassis PXI-1002 with the PXI-8335?

  Hello

  as the subject says, I am interested in the delivery of a signal to trigger between two chassis PXI-1002. At present, these two chassis are connected by a MXI - 3 system using maps PXI-8335. The software is Labview 2010 sp1 and 380 NIScope drivers.

  We want to keep (a PXI-5122 by chassis) scanners supply separated due to the requirements of our measure! The chassis are connected via cable to fiber optic. This explains why I can not just use the shutter release in Star, or connect via 'Trigger' or 'clk' cards (the inputs / outputs to the front of the cards).

  I found a few examples, but they seem to all be designed for use with a chassis only, I'll call later to the examples that inspired me to this point. Each guide explaining the synchronization of several chassis systems seems to use another material or VI is not accesible to me. This makes me wonder if my hardware has the capacibilities I need.

  The first picture shows approximately where I started from (sorry I can't post VI, confidential...):

  Only the middle part is interesting. Two sessions are initialized and manipulated parallel, trigger too. This has led to delays in the signals and should now be fixed. This apart from the VI works fine.

  Goal is to trigger only on one channel but both devices! If possible, the device will trigger must be chooseable.

  I started to rebuild the VI using the "EX Synchronization.vi 5xxx niScope' seeming spontaneity. The result is shown in the following image:

  

  I tried different RTSI lines, but had no positive results. only the main channel has triggered.

  After this first approach, I looked in the "niScope EX .vi multi-Device configured Acquisition (TClk)" and other examples of TClk which seem to work for similar problems. The VI of reconstruction can be seen in the following images:

  

  (Sorry, I had to use two photos..)

  In this case, I didn't have no choice for trigger lines, it would automatically set the VI TClk. I tried to trigger on both devices, though. This second approach seemed promising to me, but it was an error:

  "niTClk Synchronize.vi:1".

  Index (starting at zero) of the session: 1

  The error reported by the pilot of the instrument:

  No registered trigger could be found between the
  devices on the route.

  If you have a PXI chassis, the chassis correctly identify in
  MAX and make sure that it has been configured correctly. If you use PCI
  devices, make sure they are connected with a RTSI cable and that the cable RTSI
  is saved to the MAX. Otherwise, make sure that there is an available trigger line
  the trigger bus shared between devices.

  Source device: PXI1Slot4

  Target unit: PXI2Slot4

  Status code:-89125niTClk Synchronize.vi:1

  Index (starting at zero) of the session: 1

  The error reported by the pilot of the instrument:

  No registered trigger could be found between the
  devices on the route.

  If you have a PXI chassis, the chassis correctly identify in
  MAX and make sure that it has been configured correctly. If you use PCI
  devices, make sure they are connected with a RTSI cable and that the cable RTSI
  is saved to the MAX. Otherwise, make sure that there is an available trigger line
  the trigger bus shared between devices.

  Source device: PXI1Slot4

  Target unit: PXI2Slot4

  "Status code:-89125"

  This error came back even after I've identified this drug as possible to the MAX, as shown in the screenshot:

  

  In some of the textbooks, they showed how to get the MAX trigger lines, but as you can see, there is only booking options in my MAX. Whatever I do, I can't find options to define how to get my trigger signals...

  In principle, it is possible to trigger instruments in different chassis, which is indicated in this Guide and others... the question that remains is can it be done with my set of components?

  I understand that the use of multichassis compromised the integrity of the lines very adjusted as trigger in Star etc., so the configuration should be taken into account in some way, that my approach does not, I knew... But there must be a way to do this? And to start: to get just any signal from one device to the other trigger!

  For any advice on this issue, I would be very thanfull!

  Concerning

  Max1744

  Hi Max,.

  Thanks for the detailed post and explanations of your application and requirements. You're right using TClk, because this is the optimal method to synchronize the 5122 digitizers. The original VI you worked with is unique for some of the legacy scanners and does not directly work with scanners based on the most recent CMS (for example the 5122). The good news is that you can synchronize these cards to separate chassis, but it will use the calendar 66xx and synchronization (T & S) cards in the chassis of the master and the slave, as indicated in the guide that you have accessed. These are needed because a common reference clock must be shared between them as well as a couple of tripping. MXI itself can not handle export triggers and clocks, so there is no way to do this without physically wiring between the chassis with cards T & S. Unfortunately, regardless of what specific method, you use for synchronization, it will take a material extra beyond what you currently have.

  As one of your needs looks like it is necessary to retain wiring between the chassis directly, you may need to consider to synchronize using 1588 or GPS protocols. 1588 Protocol is a system for synchronization on the network while GPS course use antennas and locks for a common wireless signal. Although these synchronization methods may allow you to keep your chassis isolated, they will also require some manual configuration because you would be able to use the TClk synchronization and so the level of synchronization you can get between the cards may not be as good that can physically wire signals between the chassis using T & S cards.

  Hope this helps,

• MT MONITOR (TV) SECONDARY DISPLAYS UNSUPPORTED VIDEO SIGNAL

  I used a VGA splitter to connect my Toshiba Regza LCD TV and my screen for multiple monitors. I have the NVIDEA planned program to Clone. If I start the computer, the two appear when windows XP starts, but once the icons on my desktop, the TV shows unsupported VIDEO SIGNAL

  No, it won't work like that.  You can not use a video splitter, each monitor must be connected to its own output on the video card.

• Monitor video Signal loss

  I'm having a problem with my XPS 8500 and hope you guys can help out me.  I would like to know if my problem could be linked to the assumption of the supply of power, or if not, if you have other ideas.  I am currently waiting for Dell to call me after basically insulting me and claiming my cable DVI is not connected correctly.  I have replaced the cable and am still having the same problem:

  My 8500 XPS came with the AMD Radeon HD 7870.  I had the computer for a month and have experienced a problem about 7 times now, the latest being this morning.  My monitor (new Dell 24 ") will randomly lose the video signal.  Most of the time it's the morning after the computer remained all night and the monitor in power saving mode, or when I get home from work.  The system won't mode 'sleep' because I have that turned off so that I can remote access to my computer if necessary.  I also manually told the monitor from the DVI source to make sure that the automatic selection of the source is not the issue.

  What's weird (Besides he won't), it's that when I move the mouse or hit the keyboard the screen out of power save mode and acts that it will Brig up to my office.  But he's sitting there for a few seconds and then between new power saving mode. Even more strange because the carillon of PC indicating that it recognizes the monitor is connected again.  That tells me that the computer is not fixed because it sounds too when I disconnect and reconnect the cable from the DVI monitor and the monitor power cable.  I'm no expert, but it seems that my computer itself works (not crashed or frozen), the monitor also works, but the computer does not send for some reason any of the video transmission to the monitor.

  It does not it whenever it's on and the monitor is in power saving for a long time, but happened about 7 times in the last month and it is very annoying because I have to do a hard reboot to get back on my computer.  He even did once while I was in the Middle using the computer.

  I have a feeling that Dell will make me jump through hoops a lot before admitting or sugessting a bad video card.  Am I crazy to think that is the question?  Reading the forum made me think that it is not a question of power because my computer is not freezing or do whatever it is already asspciated with a power supply issue.

  I appreciate any ideas.

  UPDATE: Eu new map video for a week or two and have not experienced the problem again.  I hope it's resolved.

• "No video in" error when connecting two SX20! Help, please

  Hello everyone

  We have problems to connect our two SX20 telepresence equipment, which has a bridge. When you call one SX20 on the other, once the connection is established, the message "no video in" appears on the screen. How to solve this problem?

  Also, we want to call the SX20 of jabber accounts video from computers and vice versa. How can do us?

  Currently, we only connect the two SX20.

  This is the deployment, we want to have.

  

  Thanks in advance

  In most cases no video is caused by firewalls and other devices with a logic of layer-3.

  You also had a different thread open material a generic question of deployment.

  Maybe you have a cisco partner or an external consultant who can help you with that.

  As you also said mobile devices, if a 3rd party there is always a chance that

  devices do not understand well the other on road signs or the face of the media.

  But at least two sx20 should be able wiith all problems to send and receive video

  If deployed stand alone or with a call like vcs or cucm control.

  Which brings back once again, check the network ;-)

  Please remember useful frequency responses and identify useful or correct answers.

• Installation on two different Macs?

  It is my understanding that CC 2015 programs can be installed on two different Macs.

  1. However, the CC on the two computers cannot be used at the same time? Is this correct? Does this mean that I won't be able to make the video on a Mac while opening one different program on each other?

  2. If so, whether I am working on a project of LR AI, PS, PP or AE, on a single computer, I am able to pick up where I left off on another computer a few minutes later? What does it take to be used at the same time? If a project is opened on a computer and it is not closed for hours, it is considered as being used? I have you quit all programs on a computer before any intervention on the other?

  Thank you.

  You can install it on as many machines as you want, Mac or Windows or both.  Of these facilities, only two can be in an activated State (signed in).  Of these two active devices only may be using the subscription at the same time.  The subscription is in use when any single application of it is in use.  If a program is open, it is used.

• Mac Mini, end of 2012, down from video signal

  2012 (end) Mac Mini, model A1347, i7 to 2.3 GHz

  OCW mercury Electra 6 G 120 GB SSD

  Factory 1 TB HD

  16 GB of Ram

  S232 Acer

  OS: 10.11.5

  Question:

  Video signal is de-energized.

  Hi all

  I use this machine to run Logic Pro X. I tried a few monitors and different cables, but the result is the same.

  the video signal sporadically goes out. The only way I can get it is back to turn off the Mini for a hour or stick it in the fridge for 5 minutes. It doesn't seem to be dependent on the temperature, since it happens a lot less in the months more cold however showed the journal to monitor temperature as low as 73 C time and he fell again the thermal signal can therefore not the question.

  The fan seems to work and I tried to change the memory to return with noticed no difference. I recently replaced the OCW SSD due to premature failure and spin a new installation of El Capitan on a new drive. I eliminated the monitor and cable as a culprit, so I think that I am dealing with an internal failure. The machine is not under warranty.

  I read a lot of posts on mini Mac in thermal shutdown models particularly image, mine has not overheated or goes out, he simply loses its video signal. Fans and ports are clean and free of dust.

  Everyone knows about this problem?

  Install a fan speed and temperature app to help you determine if it is really related monitoring temp.

  I use this

  http://www.CrystalIDEA.com/Macs-fan-control

  I suspect a hardware problem. The graphics unit in the Mac Mini 2012 is integrated into the CPU chip

• Two different Skype on both PCs, but on the same calls running account

  Hi all

  So I don't have the means to test this until I actually need.

  But it would be possible to operate two different Skype on both pc but on the same account calls.

  So I am connected with the same account on both pc - A and pc - B. With pc - A I want a video call with person X and pc - B a video call with person Y.

  Is it possible on the same account at the same time? Or should I make an account separate to that?

  Kind regards

  Theoretically, this can be done, but very quickly your account will be reported as abuse the terms of use, and the account can be blocked.