Video stops playing after the transition

Similar Questions

• PE7 - video stop running after the return of the titles of text

  Hi gang,.

  When I add manual "under titles" aka titles text to my videos, it works best when I make it I'm going with the ENTER key.    That's fine but the video then wants to KEEP start playing from the beginning and makes me bananas.  Can I turn this off?

  Sorry if this has been mentioned previously.

  Cheerio

  Petey

  Petey,

  I think the box is always under Edition > General Preferences (a bit below), who will stop to Render instant reading. I got this OFF in ALL of my NLE.

  Good luck

  Hunt

  

• page stops loading until the cursor is moved, video stops playing while the audio continues until the cursor is moved, WHY?

  Recently updated for Firefox 25, Windows 7 and noticed that the pages load slowly or not at all. I realized, then, that the pages loaded so I had my cursor moving. Similarly, I noticed very well the videos loaded but played audio directly by. The video alone "moved" when the cursor moves. In the contrary case, it freezes. Don't know if it's a hardware problem, but I don't get it on IE. Have tried disabling all add-ons, no change. Have reset FF, no change. Please notify.

  This problem has been fixed in Firefox 25.0.1.

  • http://www.Mozilla.org/en-us/Firefox/25.0.1/releasenotes/

  25.0.1: pages sometimes would not load without first moving a cursor

• Flash video stops playing after 10-12 seconds

  Not sure when this started, but the videos now only play for about 10-12 seconds at a time. No crashes just breaks down, no errors, and it's only video. I can jump to another point in the video, and it stops after 10-12 seconds from there. I'm on the latest Firefox with the latest version of Flash. I tried to uninstall Flash using the Adobe uninstaller program. I reinstalled with 10.3, 11.2 and later even more once without success. I turned off hardware acceleration, no luck. I manually chose the resolution of the video, no luck. I started in safe mode and activated the plugin Flash, no luck. In any case have ideas?

  I tried the other two, but the Middle, I had not seen. In this page, I found that the HTML5 video play at all. So I checked my display drivers, and they have been of 2011. After their update that the problem is solved, thanks for the help.

• Why my playlist stop playing after the first song

  I am puzzled, there seems to be a new paradigm for iTunes the 10.11 and iTunes 12.3.2.35

  I create a playlist and the reading list I created in the previous version are there on the left panel and play in order, now when I create a playlist it is a big screen in the center of the screen that displays the songs in the playlist: but the songs not auto play and once that I get the first to play the rest aren't!

  I advise to another Member of the community to select the playlist with CTRL-click on the left pane where they gave me several selections which

  

  copy play stopped, I did it, went to the top of the window and press the play icon, no game, selected in the window CTRL-click game, still not play, then click on the first song in the list of SINATRA CHRISTMAS, would be playing the song but the rest of them did not.

  1. How can I get packed playlists to play

  2. how I created playlists to play in order

  3. What's all this 'up' - following.

  Please help, I have a sharp mind for a 68 year old, but it's disconcerting.

  jojoguitar

  mn_usa

  There is a follow-up, I discovered by hunt a peck, but for the life of me I don't understand the thought process of the WORKS of this THING of PLAYLIST.

  Once you do, you must always select each song in the list of what we call next door, or add to a maximum, then then you have 9 songs at the top: who come from A DIFFERENT PLAYLIST.

  Community of good luck, and if anyone, anyone has a simple process step by step, PLEASE send me the link or even a list of home made I can print to study.

  jojoguitar

  mn_usa

• Audio stops playing after about 30 seconds, the continuous video

  I created a movie with music.  During the preview, the video and the audio works fine.  The problem is when I watch the video on my pc, the sound stops playing after about 30 seconds and the video continues.  When I reset to that point the audio begins again, then stops shortly after and the video still continues.  It is a mpeg format and played on the windows media player 11.  What is the problem with the audio?  Looking for solutions to this problem.

  Thanks people for your suggestions and advice.  I had the sound to play.  I did change the audio settings for dolby to mpeg and that makes the difference.

• Apple music stops after playing a song! I use windows 10 and the new itunes. He stops playing after one, sometimes two song... radio too... Please help. I installed and all new authorized...

  Apple music stops after playing a song!

  I use windows 10 and the latest itunes on my laptop. He stops playing after one, sometimes two songs... radio too... Please help.

  I installed and all new authorized...

  Thank you...

  Markus

  same thing here for all my Mac or PC windows... they are "working" 8 months later... unreal

• Why my multicam stops playing after I do the first cut?

  I can't create a timeline of muIticam no problem, but when I add it to a new sequence he stops playing after that I made the first cut.

  I've never had a problem using multicam before. With the help of Prem CC Pro 15 on an iMac. Mixture of .mts and .mov. files

  Hi RM,.

  Please update to version 9.0.2. He got a multicam performance fix.

  Thank you

  Kevin

• iPod stopped playing in the middle of a song. The screen still shows the song. None of the buttons work. Cannot close the iPod is facing down. How can I fix it?

  my iPod, the generation classic 32 GB, stopped playing in the middle of a song. The screen is stuck on this song. None of the buttons work.  I can't stop the iPod.  How can I fix it?

  Hi, lesliefromhowell!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that your iPod Classic does not. I count on my iPod for music on the go and want to make sure that you can use your own without problem!

  Relying on the buttons have not helped get the iPod to start playing or to restart, please follow the steps outlined in the article below to reset your iPod.

  Learn how to reset your iPod

  You'll want to use the instructions under the "iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)" section. These instructions are the following:

  iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)

  To reset your iPod, follow these steps:

  1. Slide the Hold switch to the locked position and then come back!
  2. Hold down Menu and Play/Pause all buttons until you see the logo Apple/iPod (about 6-8 seconds). You may need to repeat this step.

  If you can always reset your iPod, follow these steps:

  1. Connect your iPod to a power adapter and plug the adapter into a power outlet.
     You can also connect your iPod to your computer. Make sure that the computer is on and that it is not set to go to sleep.
  2. Try resetting your iPod again.

  Good listening!

• QSI CDRW/DVD SBW-242 won't read DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}

  Dell Inspiron5100 WinXP SP3.

  Due to malware, I had to FORMAT my HD and re-install Windows XP OEM disc.  I also reinstalled WIN DVD4 from the OEM disc that came with the laptop.

  Check SYSTEM/DeviceMGR/material indicates a problem with the drive, but: it won't READ a DVD or burn a CD (which she has done before)

  Can't update anything of QSI as they were absorbed by COREL years.  No support available for WINDVD4

  When you try to run WINDVD4 with a DVD in the drive, I get a Popup of WINDVD screen that says:

  CREATE OVERLAY FAILED-Please lower your color depth or screen resolution and try again.  Of course, it worked fine with the reg settings in the past, now Ive tried even lower TWO the RES SCREEN and color at least registered but still does not work

  It WILL play CDs of music (mp3s)

  Found the following material etc.

  Provider: Microsoft Corp.

  File version: 5.1.2600.5512 (xpsp 080413-2108

  Driver date: 01/07/2001

  Driver version: 5.1.2535

  Driver files

  C\windows\system32\DRIVERS\cdrom.sys

  "" "" \DRIVERS\imapi.sys

  «"\DRIVERS\redbook.sys «»

  «"«\system32\ c:\windows\system32\storprop.dll»»»

  I installed and ran but it won't play MICROSOFT 'FIXIT' DVDs just run from WINDVD4 and still does not.

  FIXIT now brings me HERE

  It seems that FORMAT/reinstall has missed something the will allow the CD PLAYER of .1BURN and 2. READ the DVD, but allows you to PLAY CDs

  From: * e-mail address is removed from the privacy *.
  To: * e-mail address is removed from the privacy *.
  Date: Tuesday, May 17, 2011 08:30:29-0700
  Subject: QSI SBW 242 CDRW/DVD not play DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}

  Response

  Hello

  1. are you able to read any type of file .doc or .txt of DVD?

  After following all the steps (including the update of the MP9 for Media Player [MP] 11) below

  I can get the drive to DISPLAY all the data from the DVD (Master & Commander 'movie)

  on-screen MP11.  He plays (automatically) the intro (ONLY) from the DVD music (as when you put it in a DVD player, forward to press PLAY) MP11 shows all of the content and all the files on the DVD and SEEMS ready to play, but pressing on PLAY don't either not anything.

  2 , what exactly happens when you try to burn the CD? You get the error message?

  Not nothing... He's here

  3. How do you try to burn CDs?

  MediaPlayer, selection of a track list, made a list of titles, and then click BURN... nothing happens

  4 have you tried to play the DVD content in ? windows media player

  I had not before, but now I have.  Previously it was default to my SELECTION WIN DVD4 as the DVD player (I think I've EVER SEEN the WINDVD format/start page on the front screen - it wasn't the default front DVD player either but don't remember what program PLAYS the DVD, he ' comes of ").  Now, go back and see 1. above for MP11 more details.

  Try to update the drivers of CD-RW/DVD drive and check. Also update the graphics driver.

  I did the entire bottom.

  1. click on Start, click Control Panel, and then double-click System.

  2 click on the hardware tab, and then click Device Manager.
  If you are prompted for an administrator password or for confirmation, type the password, or click continue.

  3 right-click on the CD-RW/DVD drive, and then select set to update driver.

  He asks if I have an OEM driver and / disk... NO.. I run the program through...

  "Hardware update Wiz can not find a better match the software installed"

  4. right click on the graphics card and select Update driver. »

  There is no "graphics card" on the material.  This machine has integrated graphics using a part of the main memory (or other) to run the video section:

  I find:

  AUDIO, VIDEO and GAME controllers (announcement)

  Audio codecs

  Audio drivers

  Legacy video capture device

  Media control devices

  Audio Sigma

  Video codecs

  All this seem normal but above I see YELLOW TWO warnings under 'OTHER DEVICES '.

  ?!  Ethernet controller "drivers for this divide (code28) is not installed.

  ?! VIDEO CONTROLLER (VGA Compatible) I didn't HAVE NO IDEA if THIS if APPLIES OR NOT

  Device type - other devices

  MFG-unknown

  Location PCI bus, device 0, function 0.  "Drivers for this device are not installed, CODE28 to reinstall the driver."

  Has been through the usual (request for drive... Laughing out loud. Impossible to beat")

  See also:

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  Did yesterday.  It installed/ran "MR. Microsoft Fixit' with the result:

  "Question: media in the CD-RW/DVD drive is not readable" CLICKED top DIFFICULTY... and after computer "worked" on this subject awhile, he says STATUS: fixed.  St ill did not.   MP9 introduced the format of the DVD player but don't seem to read anything other then showing a list:

  UNKNOWN

  Title 1

  Title2

  Title 3 etc., but could not do anything with this list.

  He appeared a box asking if I wanted to update my MP9... sure why not so I shut everything down and uninstalled 9 and installed Media player 11.

  Go BACK to # 1. now once again.  This is where I am.  MP11 shows all DVD data, the chart "the Album/DVD cover, all"titles"on the DVD, AND play the track audio 'intro' DVD but will not actually READ the DVD. "

  So far it's PROGRESS.  We are at a point where it SEEMS at least that we are ready to PLAY and MP can SEE all the info on the DVD.

  I see many people on other sites of the same question: Player does not work after FORMAT operating system and reinstall of WIN (and in my case: WinXP SP3 and WIN DVD4 of OEM disc)

  Thanks a lot for your help so far... I hope that we can get to the next step and get the reader of CD-RW/DVD on 'PLAY '.

• Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

  Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

  I tried to reset firefox and search for similar problems, unfortunately found nothing.

  It is also weird empty space before the address in the address bar

  other extensions and addons seems to work very well.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

  Any difference?

  Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

• How to keep playing the last song played after the external card refresh

  Does anyone know how to continue to play the last song played after the update of external card? Every time when I connect and disconnect the player from the PC to update some of the songs it refresh the external memory card and then play the first song of the record. Can anyone help? Thanks in advance.

  Adding or deleting files trugger a database refresh to disconnect from the computer. This resets the file before playing. There is no way to change this.

• MU computer stops immediately after the start-up or attempts repeated; So sometimes minutes after;

  The computer stops immediately after the start, repeatedly or a few minutes after have managed to start it. The error log showed two evenys:

  (1) the service Acquisition of Image Windows (WIA) suspended at startup; (2) the server {81ED811 A1F4E726-8CF1 - 11 D 1-BF92-00600} is not registered with DCOM within the required time.  After restarting the computer, and after installing all of the updates, I installed the last printer; I unplugged the printer and the computer booted immediately!  Does anyone have suggestions, and if I have to update the drivers (hp Laser jet 5 p & hp scanjet 5370C;) How? Please help, frustration to a max; Thank you very much; HeinrichDS

  HeinrichDS

  Recommendation of the Palcouk of sense what is the operating system and is worth a try.  If you're still having problems, then you need to talk to specialists in XP (because it is a Forum for Vista).  In this case, please transfer your question in the Forums of XP to http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where the XP experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to set a video up plays in the sequence?

  New to Movie Maker in Windows 7...

  When I place a video file into a new project and publishing, the video does not work. He appears as a still image.

  Someone please tell me what to do differently, so the video file plays within the published video.

  Thank you.

  New to Movie Maker in Windows 7...

  When I place a video file into a new project and publishing, the video does not work. He appears as a still image.

  Someone please tell me what to do differently, so the video file plays within the published video.

  Thank you.

  ==================================
  I'm guessing that the format of the video is not entirely
  compatible with Movie Maker.

  Convert video file to WMV format before
  import into Movie Maker may be the solution.

  There are to many converters available on the net...
  some free, some details... the following freeware is
  just an example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your video files on the main screen.

  Or... Click left on the video button and navigate to the
  your video files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When video files are imported into Freemake,
  On the left, click the WMV icon at the bottom of the screen.

  The 'WMV output settings' screen opens.

  Choose a folder ' save in ', so you can find the
  converted files.

  On the left, click the "Convert" button and wait for the files
  to convert.

  That should do it...

• The movie will stop playing at the end of each slide

  The movie will stop playing at the end of each slide. I record a movie, and the registration process seems to go ok. However, when I play the movie, it stops at the end of each slide rather than move to the next slide automatically. Can you tell me where I'm wrong?

  Thank you for that. It works!