Video streaming problem.

Similar Questions

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• Sound on videos streaming is choppy / sounds under water?

  On youtube and hulu, when I try to play any video, it sounds all jerky and scuba/echoy. Computer restarted twice, without change. I went to the page of the firefox plugin and some were obsolete, they are now all updated and the problem persists. Cache has been cleared, still having the problem. Music in iTunes works very well, same videos streaming on IE works fine. So, it's a FF problem. Any ideas on how to fix it?

  If you can not get Flash 11.3 to work and want to return to 11.2 Flash to see if it works, then you can download Player Flash 11.2 through this direct link:

  • http://fpdownload.Macromedia.com/pub/flashplayer/Current/Licensing/Win/install_flash_player_11_plugin_32bit.exe

• Satellite A210 PSAFJE crashes when watching video streams

  My Satellite A210 PSAFJE 003003KS has been a royal pain in the behind lately.
  It seems almost every moment of the accident while watching videos streamed over the internet, using internet explore and firefox.
  And I also have trouble getting the computer resets as well.

  Most of the time, when I press the reset button of the will to power laptop down, but never powered takes again properly and often several attempts now hold the stop button and reset manually to get it to power.

  The only advice that could give me the world pc tech guys was obviously find the computer, but I m wondering if it was a common fault on these laptops.

  > Obviously the only advice that could give me the world pc tech guys would find the computer, but I m wondering if it was a common fault on these laptops.

  Common fault? You can't be serious.
  I have the 10Y A210. It s preinstalled with Vista and XP. I watch movies (DVD and internet streaming) also I play videos of youtube, and to be honest I didn t notice any similar behavior cell phone like yours.

  I think that the technician is right; It seems that your OS is confused who knows why?  :| In most cases, the file system and the registry might be corrupted.
  Therefore, in my opinion, you should try to reinstall the OS using the Toshiba Recovery DVD to check if the laptop would go without problem after reinstalling the operating system.

  In most cases, it's a good solution!

  Please check this!

• Video streaming has stopped working

  I have a BDP-S370 which was streaming Netflix, Hulu, Amazon, Youtube fine for almost two years, from 3 days, I got the error: connection status cannot be confirmed. Service has not started in this region... my routers very well (my pc and mac have no problem), the player can check for updates. But any time, I try to check the video Streaming or see "Advanced", I get the same error "Région" after the acquisition of content 1/3, 2/3, 3/3.

  I tried to get help from online chat - but they were useless. I'm in Orange, California, and I know that the same question has hit the Ireland and it was due to a failure on end of Sony. The cat online stock exchange would not confirm any event like this (I even sent the link Sony UK) and everything he said was to contact the ISP - with what? He would not provide address IP or UNC of the Sony servers, so what is the ISP that is supposed to do?

  Anyone else had similar issue or have one in California of the South, United States or TimeWarner cable?

  Sorry to hear that it still does not work. I had another thought that is kinda a kill or cure.
  I have read that many people were able to register their player for a better prepared because of Sony fact "Database Maintenance". After that, I saw several people get errors of 'Region '.
  Perhaps there is an incorrectly flag.
  Switch on your player and let it sit on the "home"(et connecté à internet). Menu display "»
  On your computer, go to http://internet.sony.tv and sign in with the same user and password that you used when you activated your reader. You should find your player listed under your account.
  Delete as if you is no longer belonged.
  Wait 15 to 20 minutes to ensure that the database of Sony has updated.
  On your reader navigate to activate enhanced features. It should give you a four digit code again a tell you can return to the web site.
  Register your player and see what happens.

• who suffer interruptions in network with video streaming on JGS524E

  I bought a new JGS524E to replace my existing DLink switch. Unfortunately to say that I'm not convinced by the new switch as I am with streaming video network interruptions. Technically speaking I record TV streams from a receiver of (Duo2 VIEW) on a NAS (Synology), the two are directly connected to the switch.

  At irregular intervals, the network connection seems to be interrupted the receiver cannot save for 1-2 min, which ends in the openings in the video stream.

  I have checked the receiver and the NAS twice and could not replicate the problem. Back on the Dlink Switch, all right.

  How can - I messure the connection and the flow of data to identify the problem and solve my problem?

  Thanks in advance.

  Hi Moussa,.

  It was a long trial of a groping period. Unfortunately all captures failed due to the overall size of the file with wireshare. However, I was able to eliminate the problem occurred a simple but effective change in the seetings of the source network. I changed the drive mounted of CIFS, NFS... Not sure why she has worked with before plu LAN switch with CIFS. In any case - solved and happy!

• HP t5740e with Puppy Linux - poor video streaming

  Hi all,

  I got my hands on a brand new t5740e in a trade and felt happy about it. Thought I would install a minimal Linux distribution and use the computer for stuff online on my Benq 24 '' LED screen. I removed W7 integrated and installed Puppy Linux, and while everything works great, video streaming is terrible. Very laggy, glitch, agitated.

  Tried several versions of Puppy Linux. Precise puppy seems to work better, but it is still far from perfect.

  -Flash player is installed, the latest version

  -Video driver Intel is in use

  -Installed FireFox, the latest version

  -For video playback (offline) regular, there is no problem whatsoever

  -When streaming, it works very well in the window, but much worse in mode full-screen. Audio is perfect no matter what happens.

  T5740e hardware specifications should be more than enough to run a minimal distribution like puppy perfectly! I installed it on computers with specifications well below and it works a lot better there, so my question is... What gives? What is happening and why? Can I do something to fix this?

  Marble42, welcome to the forum.

  I think that you will get more responses to your problem if you start a thread here.  The members who know the better your Thin Client.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• WHY I CANT WATCH VIDEO STREAM

  CANT PLAY VIDEO STREAM IT CONTINUES by SAYING ME Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

  Hello

  Welcome to the Microsoft answers site!

  This problem may occur,

  (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  I suggest you try the following steps:

  Step 1: First, check to see if Windows Media Player streaming video settings is enabled. To do this, follow the steps below:

  (a) open Windows Media Player and click on organize.

  (b) go to options and select the network tab.

  (c) under the network tab, select all the boxes to check and try.

  Step 2: To determine what codec was used with a specific file, play the file in the player, if possible. When the file plays, right click on the file in the library and then click on properties, the file, look at the Audio and video codec codec.
  

  
  Step 3: download and install the Codecs:

  Follow these steps in Windows Media Player:

  (a) click the arrow below the now playing tab, and then click Other Options.

  (b) on the Player tab, select the check box automatically download codecs .

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  (, Read the player always try to download codecs automatically?)

  Step 4: when you open Windows Media Player next, the option plan you will find the stream menu bar. In the menu bar of data flow, please apply the settings you want to the stream and the video game under streaming options.

  If this does not match the type of video file that you are trying to replicate with windows media player default programs.

  You can make the default program using set Associations.

  (a) open default programs by clicking the Start button, click default programs.

  (b) click on associate a type of file or Protocol with a program.

  (c) click on the file type or protocol that you want the program to act as the default value.

  (d) click the program of change.

  (e) click the program that you want to use by default for the selected file type, or click the arrow next to other programs to show other programs. (If you don't see other programsor your program is not listed, click Browse to find the program that you want to use and then click Open. If no other programs are installed that are able to open the type of file or Protocol, your choice will be limited.)

  (f) click OK.

  Step 5: Configure the protocol settings To change the Protocol for the player settings

  (a) click the arrow on the reading tab, click More Options, and then click the network tab.

  (b) make the desired changes.

  (c) If you disable the TCP , or if your firewall TCP stream blocks box and the player are configured to use the RTSP protocol, the player will try to receive the streams by using the UDP protocol. If you also clear the UDP check box, or if your firewall blocks broadcasts that use these protocols and the player is configured to use the RTSP protocol, the player will try to receive the streams by using the HTTP protocol.

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-protocols-does-Windows-Media-Player-use-for-streaming

  Now, check if the problem is resolved.

  Please see the link below for your reference:

  http://support.Microsoft.com/kb/911710

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista hangs on video streaming.

  This happens quite often and gets worse... because I try to make vidio streaming.  The system hangs and restarts it... but I get no flow of microsoft... even after several incidents last updated reports.   Seems that Vista is more unstable than on time.  Only has been installed before 2 months... I tried unsuccessfully to restore points.  I tried all kinds of microsoft fix it solutions... Still no help. He is a licensed copy of Vista by Microsoft.

  Original Tilte: Vista service pk2 hangs after streaming vidio or media player... even after that I used a microsoft codec Fixer

  Hello

  Please contact the Microsoft Community.

  Please answer the question-

  (1) try you video streams on Internet Explorer?

  (2) what is the exact error message?

  Note: assuming you streaming of videos on Internet Explorer, I would refer the link -

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Do get back to us and let us know. We will be happy to help you.

  Thank you.

• EA6300 is not the video stream from computer to Ipad on my local networt

  I was previously using Video Stream (from Connect3) for videos from my computer to my Ipad with no problems. I used a WRT400n and have now upgraded to the EA6300. Now my Ipad can't access the server on the computer. I tried port forwarding, but that did not work. I guess that some settings on the router blocks. The computer is connected to the usb wireless network. It was connected via a cable when using the 400n.

  IP 192.168.1.118, IP 192.168.1.40 ipad computer. Anyone has an idea why the Ipad and the computer can not connect?

  OK, I thought about it. I had to go to the control panel and the settings of firewall and say let the Videostream program through. The strange thing was he had 2 ad for Videostream, one has been verified, the other was not. Checked both and then it was fine. Thanks to all who responded.

• Video streaming on google chrome / internet Explorer continues to window 7

  When I look at the video streaming such as Youtube on google chrome, my laptop stops after a few minutes with the vertical lines at random on the screen accompanied by a strange noise (average frequency), and I can't help but it reboot by pressing the power button / long. The same problem occurs on Internet Explorer. I have a Dell N4010 Windows 7. I hope someone can help me! Thank you very much.

  Hello

  We appreciate that you give us the opportunity to help you with your concern for Windows.

  Your post, that it seems that you are facing issues playing videos online.

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  For the issue of Google Chrome, please contact their support of assistance team:

  http://productforums.Google.com/Forum/#! Forum/chrome

  Get back with the result of the steps suggested also let us know if you encounter problems with Windows and we will be happy to help you.

• Is it possible to separate a video stream into two video streams?

  I do not know how to ask this question with keywords, but I essentially have the opposite problem to superimpose two videos in one. I use OBS to capture a stream video computer game and a webcam to feed at the same time. However, my webcam stream is lagging behind my video stream of the computer. I want to reframe the section video (somehow) webcam and manipulate separately from the video game.

  Thus, the videos are superimposed by the SIB program

  

  I don't know if it is even possible to create and manipulate two videos of a video like this, but any guidance would be appreciated. Thank you!

  If I understand correctly, you want to keep the webcam shot overlay, but just change the "timing" to synchronize the webcam with gameplay, right?

  Equip your video clip V1. Put SAME clip V2. Apply the CROP effect to clip V2 and harvest all the 4 side down until you have just the small webcam PiP showing (disable V1 clip temporarily to see what you're actually cropping on V2).

  Now pass the V2 clip left or right on the timeline as necessary to implement synchronization with the V1 (gameplay) clip. Fact

  Thank you

  Jeff Pulera

  Safe Harbor computers

• WiFi, drop any audio/video streaming via Bluetooth

  Hey everyone, so I had a problem recently.

  I recently got a bluetooth headset. It's a BlueAnt Q1. I have updated to the latest version of the software package and also have had no problem with him.

  In recent weeks I noticed wifi PRE stall while I'm listening or watching an internet video stream with my Blueant Q1 is connected. The flow stops, and either Stitcher/Pandora/Mediafly reports an error of some sort. The only reason why I know that its wifi is because I tested it. I look carefully until I see the problem arise. The phones wifi goes down to 0 bars, and then this little icon three points could appear as it reconnects. I tested it on two of my routers, which is a wireless bridge. This happens on both. I had my phone because I think that 6 months now and never had any problems with wifi or streaming content until I started using bluetooth.

  Here are some specs and the equipment I use.

  Palm pre more (Verizon)

  BlueAnt Q1

  Wireless Asus, one acting as a wireless bridge two routers

  (The problem occurs on both)

  ASUS WL-520 (DD - WRT)

  ASUS WL-520gC (wireless bridge, DD - WRT)

  Everything is up to date on the firmware and upgrades. Also when this problem arised, I didn't any changes in versions of firmware/software to upgrade before or since I got the bluetooth headset. Other than the upgrade of the headset to the current firmware.

  The thing is, I don't remember what happens the first week or so by using my bluetooth headset.

  Any advice? Or maybe it could be a known issue? Any help would be appreciated, thank you!

  I posted too soon. Apparently its my two routers current-wrt firmware dd that caused the problem. Used an old non-ddwrt router and it was very good. Replaced by a different version on both my current routers and seems to work correctly. Weird, but I'm not complaining.

• The single video stream creating several necessary video effect.

  I created a video wall to serve as a backdrop for a staging. The wall is made up of 8 screens of television randomly spaced 55 ". I used Videoplex4 to black box to stretch the video image to feed on all eight monitors to create a single video image. However, I need a program that will allow me to create a model that mimics my wall of monitors so that I can drop video segments in the model, creating the effect that I have 8 simultaneous video streams. Then, I need to be able to "cue" various video clips during a twenty minute show, so they sync with the live action on stage. Please notify the necessary software and hardware in the way of what I need to pull this off.

  Thank you

  I used Videoplex4 to black box to stretch the video image feed

  on all eight monitors to create a single video image.

  What is the resolution of the "flow video image" used by the "Videoplex4 of the black box?"

  However, I need a program that will allow me to create a model that mimics

  my wall of monitors so that I can drop video segments in the model

  creating the effect that I have 8 simultaneous video streams.

  This can be done by first using several layers and effects of "picture-in-picture.

  in a sequence that is defined in the format you plan to "Videoplex4 of the black box."

  but it will take a few tries to have the images where they will be

  correctly positioned once powered through "black box Videoplex4.

  Then, I need to be able to "cue" various video in clips

  20 minutes show so that they synchronize with the live action on stage.

  Yes, there is the problem... I don't know how with clues "on-line".

  Not knowing your content planned or how does the 'Videoplex4 of the black box. "

  It is difficult to propose things like the closure of the readings or gels that can be added.

  or instantly accessible searchable index points in reading.

  It would be much more practical to produce the video, so that the company

  Use it in their rehearsals for the performance of the existing time video

  instead of trying to time the video in a real context to the artists on stage.

• Import of failure - GoPro Hero4 4k30fps-"the file has no audio or video streams.

  I try to import a video of 4k30fps of a Hero4 GoPro black and I get this message "the file has no audio or video streams.

  I tried to import into a number of different ways, is there a help or advice?

  I use Windows 7 64-bit and Adobe Premiere 8.0.1 (21)

  Thank you

  Uninstallation and reinstallation of a "Typical" Apple's Quicktime installation seemed to fix the problem.