Video Surveillance IP - DHCP

Similar Questions

• Slideshow: remove noise of embedded videos

  I really like the features of slideshow in the photo of MAC OS X app.

  BUT: How reduce or remove the sound of the embedded videos.

  (The sounds of the wind in my video surveillance from this music I want to eliminate)

  When I opened one of the videos embedded in my slide show, I can see the volume control feature.

  I can turn the volume down, but there seems to be no chance to save these changes.

  Does anyone have any advice for me?

  You can mute the audio volume or remove the audio portion of the video entirely with Quicktime Player 7 and Quicktime Pro via the export option and settings.  He can also do without the Pro option.  GarageBand can do the same thing I said.

  But any changes will have to be taken outside the Photos and the modified file imported as a new file.

  

• Video monitor *.

  Hello

  Hello

  Foglight NMS support RTCP, RTP, SIP protocols?

  More technical questions qualification should be asked? Type of devices? ...

  Thank you

  Tony

  Hi Tony,.

  Today, NMS monitors and displays the ICMP, TCP, and UDP in the traffic analysis module. In addition, the VoIP module supports call flow control for Cisco, Avaya, and Shoretel. But NMS can't stand video surveillance right now.

  Kind regards

  Matt

• R6220 routing between WIFI and LAN stops

  Hello

  I use the wifi netgear R6220 router. I have a few devices connected using LAN: TV, surveillance and desktop computer, but the computer is available only if UPS is running.

  TV is configured using DHCP, but has implemented monitoring static ip = 10.0.0.125.

  DHCP is configured to allow the address 10.0.0.2 - 10.0.0.50.

  the router configuration is reset to the factory, and only the LAN and DHCP address pool address has changed.

  Problem is that, after awhile, I cannot ping 10.0.0.125 (supervisory) WiFi.

  After that the router has been rrestarted and configured, it works for a while, and the next day I try to check video surveillance and ping do not work...

  I checked Wifi 2.4 and 5G.

  I also updated firmwqare to the last.

  Do anyone know of this problem, because I do not know if I would come back to router for seller or not.

  Thanks in advance.

  Peter.

  Forget the static use address reservations.

• Is it possible to assign a different sound to my second e-mail account?

  I have two email accounts set up and works fine in Thunderbird. My main account, which I use for almost everything and a second account that I use for video surveillance and I was wondering if it was possible to assign a different sound to the second account.

  You can try this addon, it seems to be mixed results.
  Hard to know if it had fallen to not properly configure the user.
  I have not used it myself, but it must be worth a try.

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/mailbox-alert/

  How to install the Extension module:
  After you download addon extension *.xpi file to the downloads or desktop folder.

  In Thunderbird
  'Tools > "Add-ons"
  or
  'The menu icon ' > 'Add-ons'

  • Click the gear icon and select 'install module file.
  • Find the downloaded *.xpi file and click 'open '.
  • You have as much need to restart Thunderbird when you are prompted.

• How can I configure things if a program runs automatically at startup?

  I have a video surveillance program, I would have run automatically using my UID, not root login, when starting my Mini (its running OS X 10.11).  What is the best way to do it?

  Configure a user account for doing this, set this auto connect user account & also to set the application to open a connection point. System Preferences > users and groups is where you manage all that Setup.

  If you need a 'device' you should probably look at running Linux or something that is not as heavy user in OS X: this is very dependent on user names to run applications. You will need to configure the lock screen to restrict access to these user data to anyone with physical access, be aware that this configuration is not ideal for security. Someone could just restart and access the data before the screen saver locks the screen, you could start via a login script, but it is perhaps too easy to defeat too.

• Satellite L300-1F8 - AHCI and WLAN drivers

  I have L300 1F8 PSLBGE and I have 2 problems with it

  1. I preferd using XP to install it so I put video surveillance ACHI not so I knew forum that I can install hardware Intel software to set the DCIS but after I downloaded the software I can not install it because (no system resources).
  Can you tell me how to install it correctly too, in system properties, I noticed it says that the RAM is 2.87 GB! is it supposed to be 4 GB

  2 - I tried to install wirless LAN but I can't. What software is right for me to do from the downloads page direct me to another page that contains several types of software. Can any body tell me that I have to use?

  Thank you

  Hello!

  1. first of all it of called * AHCI * and not ACHI ;)
  I put t know what you mean with you can t install it but the Intel Storage Manager contains the drivers you need and you have to integrate the drivers during the installation of Windows XP. This means that you must use the external floppy drive or nLite ([www.nliteos.com]). So I think that this Toshiba document could be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm
  If you have other questions about this, check out hundreds of threads here in the forum!

  On Windows XP it of not possible to use 4 GB of RAM. Why? Check this box:
  http://APS2.toshiba-tro.de/KB0/TSB82022E0000R01.htm

  2. on the Toshiba site, you can search for your model. Then, you will get a list of all the drivers you need for your mobile only:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• RAID1 ix4 x - 300 d 2

  Hi, it is possible create 2 x RAID1 space? I have 2 x 2 TB for backup of data and the next 2 x 500 GB for video Surveillance.

  I'm sure that ix4 - made 300 d does not work in mixed mode or split. All configs I've seen are 'all or nothing '.

  Suggest run the 4 disks in Raid 5 (default) and make the backup with a connected external drive...

• Not able to download Motion Detection on the server of one of my Linksys WVC 2300 camera

  I have two 2300 Wireless that are configured by the same video monitor cameras and I activated triggers motion detection on both devices, but only the camera downloads of video surveillance activities based on motion detection (I can see the video in the surveillance system and I can access the cameras and I can also record video) but I cannot get the camera to download automatically activated detection video movement.

  Are both unable to download cameras activated video motion detection?... Please explain in detail...

• Monitoring software WVC210 requires MSAccess?

  Although I can get my WVC210 work and access it via a do, the video surveillance system software fails always (the software that runs on the PC to interface w. of the camera).  MainConsole.exe fails on launch with 'failed to load correctly the database model.  Please re - installing the system to solve this problem', and DBTools.exe fails with "Installation of the software not found.  I strongly suspect its because I don't have MSOffice (particularly MSAccess) installed.  Yesterday, I opened a disturbance of Cisco on this, the representative think I'm onto something, but it is not safe.  PC software did not help.  Can anyone confirm if they can run the installed software of video surveillance on a PC with NO of MSAccess?  Thanks,-Nerdly

  Thanks icebreaker, you reason the issue is UAC, your not resolved the problem (or almost).  My additional comment is that at the launch of the app, it apparently still must be "run as Administrator".  After your steps suggested (uninstall, disable UAC, reinstall and re-enable UAC (for security while the guests are a pain), then in any Vista (admin, non-admin) user account I can run the software as long as I have to 'run as administrator'.)

  Thank you very much.  Cheers, Nerdly

• Adding a new wireless router from Linksys at an old Linksys router system

  Hello

  I'll install a new standalone DVR to a home video surveillance system.  I would like to be able to access it with my current PC so I would like to add a Linksys wireless router.

  I'm currently 1 Linksys Wireless - G Broadband Router with speed Booster model WRT54GS-BP and 2 models WMP54GS from PC that have PCI adapters Wireless-G with speed Boosters (802.11 g).  I had these installed since 2006 and although they are no longer supported I really want to have to upgrade because they work very well.

  My questions are:

  If I add a new Linksys router to my new DVR will be able to communicate with my older Linksys router and adapters?   If Yes, what would be the best new router Linksys type should I buy?

  Thanks in advance for any help and advice.

  Hi Dan,.

  Please excuse the delay of time here, but I had a hard time to post a reply.  I added Ethernet Wireless-N - WET610N bridge.  When I installed the software, I kept getting error 102 - an error occurred communicating with your device.  I called Linksys for help and the tech had me make a few changes to the router 192.168.1.1.  I was able to install the Web Service to display the camera on both of our PC.  So the addition of the WET610N allowed us to access the DVR wireless!

  Thanks a lot for all your help!

• PowerEdge 2950 installation home

  Hi guys,.

  I was wondering if someone can help me to choose the installer for my server at home (software wise).

  I installed my PE860 PE2950 III. PE860, I got Windows Server 2012 essential, but given that my school gives me all the free MS software I thought to go with Windows Server 2012 R2 Standard.

  PE 2950 Config:

  1. 2 x 2.33 GHz Quad Xeon E5410
  2. 16 GB OF RAM
  3 Perc 6 / I with RAID RAID 5-4 x 750 GB, 2 empty slot and 1-2 x 146 GB 15 k

   

  Principal I will use server as:

  -File server, storage media

  -SQL Server Business Intelligence 2012

  -Visual Studio 2013 Pro

  -IIS

  -in the near future with NVR video surveillance

  1 should I go with Essential version or standard since it is free anyway?

  2 should I configure some virtualization, separate for each activity?

  Thank you

  I'd be inclined to say 'Standard '... Standard includes, in the single-user license, the ability to run 2012 directly on the hardware for purposes of management, and TWO virtual instances within this physical body... so, basically, you can run two servers for the price of one (don't forget the license, you cannot do anything other than the management of Hyper-V in the case of the physical host.)

  You could do your development stuff in a virtual machine and the media on the other stuff (or run only the dev VM and use the physics/host for tips of media... or if you have multiple licenses, install as many virtual machines as you have licenses for and/or need).

  Virtualization is the future (correction, is already the standard for deployment of server), so if the idea is to stay side by side and paid in current trends and technologies, and then do as many possible virtualization - at least as much as is possible, in view of your projects (it is also important to recognize the differences and limitations of each).

  I might be inclined to recommend you put your 4x750GB in a RAID 10 disks, you will get better overall performance from a 10 to a RAID 5 RAID (RAID 5 has good performance of reading but writing bad performance (bad for database use and probably for recording (NVR) media) and RAID 10 has read and write performance).

  Essentials is not only more limited, it is less flexible.  For example:

  • You MUST implement Active Directory with Essentials (with special exceptions) - it is optional with the standard (for example, you can use a workgroup)
  • less than IIS and other types of connections (though it might still be enough for installation of your 'home')
  • Hyper-V (to run virtual machines) is NOT available in Essentials
  • Essentials includes a license for a single virtual machine a physical machine GOLD - not both
  • of 'Assistant', so is managed differently (with fewer options) than the standard

• Cisco ASA 5500 Series 4-Port GE SSM

  Currently, we have 2 asa 5510 firewall and need to add the

  Cisco ASA 5500 Series 4 - Port GE SSM extension module. Can it be added when the device is turned on and running or the firewall must be turned off to install the plug-in?

  Hello

  You could try to ask this question of the team of firewall, as this page from the community for the physical security and video surveillance.  The team of firewall is located here:

  https://supportforums.Cisco.com/community/NetPro/security/firewall

• VSM 7.5.1 and Google Maps

  Hi people,

  We have just moved to VSM 7.5.1 and was interested in the use of Google Maps as my source external card, but it isn't really guides on how to implement that. I see the two that are already there and the special URL that is used, but I can't find all the information on how to get such Google or other. Did anyone had success with this?

  Thank you

  ~ N

  Yo Nick,

  I did some research on this subject. I found that google does not allow direct access to the tiles from the Board. They want to use you the google maps or google earth as the front-end application. Because the card video Surveillance Operations Manager tool uses leaflet (an open-source JavaScript library

  for interactive maps of the mobile environment) it can easily be integrated with Google maps.  I ended up using Mapbox they provide a free api interface. The card information are better than MapQuest and OpenStreeMap but is not also updated google maps.

  I have created two links to maps for the view and one for the satellite view. Links below:

  https://API.mapbox.com/v4/mapbox.streets/ {API KEY HERE z}/{x}/{y}.png?access_token=YOUR

  https://API.mapbox.com/v4/mapbox.satellite/ {API KEY HERE z}/{x}/{y}.png?access_token=YOUR

  You can go the the Mapbox site and get a free api key.

  Hope this helps you.

  Manny

• "authentication control-direction in" CLOSED authentication mode

  Switch: 4510R-E, running a DEV version 3.6.0-based

  ISE: 1.2.0.899 patch 7

  Hi, I worked on a weird issue where some of my clients would pass through their IP address and the only way I could get it back was to spend their open port in authentication mode. I need to run in closed mode, because I change VLAN via MAB.

  I worked with TAC, and they suggested that add the command "authentication control direction in" in my config switchport (below). Couple tests Ive done, this seems to help. But I understand why. Isn't the direction-control a little command reduce to naught the principle of closed mode operation? That is, it allows a communication until the device is allowed. Thank you.

  interface GigabitEthernet2/18
  switchport access vlan 34
  switchport mode access
  switchport voice vlan 66
  events-the link status logging
  authentication event fail following action method
  action of death server authentication of the event allowed vlan 34
  action of death event authentication server allow voice
  living action of the server reset the authentication event
  the host-mode multi-auth authentication
  authentication order mab dot1x
  authentication priority dot1x mab
  Auto control of the port of authentication
  restrict the authentication violation
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  service-policy input QoS-entry-policy
  Service-politique-accueil-port-sortie-strategie output QoS
  end

  I also need to use this command to preserve the authenticated devices. He was going on with a video surveillance system, which was an embedded Linux operating system. It's the MAB and because there was no transmission all noisy traffic (unlike a windows box) then the switch would not be able to reauth it as it had no mac address to auth, so show up with an 'unknown' in the MAC field.

  It allows essentially traffic flow out of the port. This active unit to receive HTTP traffic and respond, then the switch could auth it again once the device sent a frame.

  When you do a Show authentication sessions you will notice a Oper control dir: the two will pass to Oper control dir: in