video to AutoPlay causes the hit counter to double count

Similar Questions

• The hit counter on my site no longer works on Firefox, but still works in me. How should I do?

  I have a free (by easycounter.com) visitor on my site meter. It worked fine in Firefox (3.6.16) and MS Internet Explorer.
  Yesterday, I noticed that he is no longer with Firefox but still works fine with MS IE.
  Earlier in the week, I have download some add-ons recommended by Firefox.
  Can someone tell what could be the problem and how to fix it? The code for the counter is still intact on my page at www.qsl.net/ve3bdb.
  Thanks in advance.
  Furthermore, the page now takes forever to load when you use MS IE, but I don't know if that is related.

  You are welcome

• Inspiron 3520 downgraded to Windows 7, the video driver installation causes the blue projection

  I demoted an Inspiron 15 3520 of Windows 8 for Windows 7, but every time I install the video driver recommended, from either windows update or in the Dell drivers section, I get a blue screen on startup. Roll back the windows standard VGA driver resolves the problem.

  Is there one another driver I can try? (I already run Dell Diagnostics, passing everything ok)

  Hi crawshs,

  Please check if the drivers have been installed in the order indicated the link after Windows 7 below downgrade:

  http://Dell.to/X1IKGu

  Click on the link below, enter the system service tag and click on submit. Select the operating system from the drop-down menu to get the drivers for your computer.

  http://Dell.to/QjjZDA

  Dell ships this system with Intel graphics card.

• Website hit count and rating stars

  Please help I have 3 questions:

  1.       How to add the hit count on a website so that I can find out how many people have visited my site.

  2.       How to add the rating stars for the music and video, so that people may be able to rate / vote for the best song/video of the month.

  Thank you for your help.

  StatCounter.com

  How do you know that GA or any other service of statcounter is accurate? It's quite accurate. GA uses the same technology to save its stats like any other statcounter. Not looking for any meaningful stats, just page views by visitors. GA provides no useful statistics anyway and they can not be displayed to visitors, so forget the GA to your needs.

  People care about stats success. When I replied to your thread I saw how many views there and who determined my decision to respond. If there are multiple views and several answers, I guess that the wire is too close, and I would not answer. View stats make a difference and viewers care of the it. When I seqrch a video from YouTube, I usually choose to display the result with the most views. Nobody cares about stats success huh? It's a complete load of Bull. Nobody cares about people who say nobody cares about stats success when you're in a thread asking how to hit his stats on a website is a more accurate statement.

• command to erase the hit ACL County and stats interface

  Hello

  Does anyone know a command to erase the HIT count on an ACL and a command to clear the counters on an interface for the PIX? I can't find it anywhere. Any help would be appreciated. Thank you.

  The f

  Hello

  Try the command:

  > access-list clear counters

  This clears the counters displayed by the show access-list command.

  To delete counters on an interface, enter configuration mode and issue this command: clear int ethernet0

  (You must be in config for this command mode works.)

  Speed/duplex, once spending config mode and type this command: interface ethernet0 100full

  In addition, the following URL might be of interest...

  http://www.Cisco.com/en/us/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a0080172786.html#1112250

  Hope this helps - thanks, Jay

• How to add a hit counter in Dw.

  How to add the hit counter in DW (simpel one)

  Success counters are meaningless.  They do not tell you or your site visitors anything accurate or useful. So don't waste time with them.

  Google Analytics is running in the background.  Among other things, GA followed by measures of code:

  • old, and unique hits
  • where these hits come from - by region of the world, research on organic web, other websites, etc...,
  • How long they stay - bounce rate,
  • how they interact with your site - what links they click, pages visited, etc...,
  • What browsers and web devices people use,
  • and much more.

  GA is free and it fits perfectly with your Google Webmaster Tools account (also free).

  Nancy O.

• Can not stop the AutoPlay of the video

  Even if I don't have an internet connection counter always hate sites with videos of AutoPlay. I used to just stop going to these websites, but now that sites do more and more, it is difficult to avoid. My monthly data use boosted last year.

  I enabled both plugins.click_to_play that media.autoplay.enabled to FALSE. None of these solutions worked. I restart Firefox after the fact and I also tried to restart my computer as well. My test is to go to CNN.COM and click on a story. I still get the annoying autoplay videos.

  Is there anything else I can try?

  I found this on another site and it worked for me. So I thought that I would update here for others would know.

  «Enter about: config in the firefox address bar (confirm the message information where it appears) and search for the preference named plugins.click_to_play.» Double-click it and change its value to true.
  then you can go to tools > addons > plugins and set flash or other plugins 'always ask '. Subsequently you will be notified in the address bar or in the area of content as with the flashblock extension - when there is plugin content on a page and you can activate it with a single click... »

• Can't stop the video from AutoPlay

  I had this problem for a few versions of Captivate now - still can't figure out in Captivate 9. I put a MP4 video on a slide. I started playing through three slides. Which works very well. But I can't get it to STOP AUTO play when the slide is displayed. I tried to make a break in the world, I could find a break action. I don't want to bring down the timeline - I want it to display when the slide is displayed, but not to play - because I would have a text to explain the video until it just starts to play. I have a button that will start to play. I could use a still of a frame and have it play on the next slide, but that seems just silly to have to go through all that.

  What Miss me? It is difficult to do this stop playing. UGH.

  Thanks for your suggestions.

  You're referring to multiple slides synchronized video?

  This type of video is locked to the timeline. So unless you have something to pause the timeline before the beginning of the video (for example a click box or a button) then the video will play as soon as the object enters the timeline.

  If you want to have the option of video plays DO NOT until the user clicks something, your original question indicates you know from the video in a different slide work.  Or your other alternative is to use the video of the event.

• On Windows 7, by pressing the eject button on the DVD player sometimes causes the monitors to twinkle

  My PC works fine for just about everything, except when I need to pop in a CD or DVD. It seems random, but when I hit the eject button on the DVD player, my screens sometimes twinkle. It happens about once every 5 times as the button eject. I'm running a dual monitor, with a monitor on a DVI input and the other on a HDMI input. Both monitors sparkle.

  The only things I can think of that can cause the problem are of my diet or my graphics card. My PC has never stopped on me during other operations, including executing some more processor intensive tasks. This seems to be a problem with my graphics card, but why my graphics card would randomly hitting the eject button?

  Windows 7 Enterprise SP1 (64-bit)
  Intel Core i5-2400 s Sandy Bridge 2.5 GHz (3.3 GHz Turbo Boost) LGA 1155 65W Quad - Core Desktop Processor Intel HD Graphics 2000 BX80623I52400S
  G.SKILL Ripjaws Series 8 GB (2 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1600 (PC3 12800) desktop memory model F3-12800CL9D-8GBRL
  ASUS black drive Blu - ray SATA model BC-12B1ST/BLK/B/AS - OEM
  ASUS P8H67-M PRO/CSM (REV 3.0) LGA 1155 Intel H67 HDMI SATA 6 Gb/s USB 3.0 Micro ATX Intel Motherboard
  XIGMATEK NRP - PC series ACXTNRP-PC402 400W ATX12V Ver.2.3 80 PLUS BRONZE certified Active PFC power supply

  I found the solution to my problem of graphics. Wow, really?

  So after the video driver updated, he set a maximum resolution on my HDMI output to 1600 x 900. That's if access you the resolution settings through the control panel > display > adjust resolution. Is not that how most people set the resolution?

  The update of the driver has replaced the max resolution by default setting, but it can be given via Intel display control panel (no was not yet aware, I had such a control panel). This control panel option is available for the Intel graphics controller hardware. To set the resolution, right click on the desktop and select "graphics properties." Select 'Advanced Mode', and then configure the resolution 1920 x 1080. Once the parameter is committed through this control panel, the Windows 7 Control Panel settings to work as you would expect, and the monitor is the 1080 p display.

  It is delayed. Pardon my French.

  Well, at least now I'm back where I started, IE still has the problem with the eject button causing the dual display to flicker. It happened only twice since the update of the video driver, then perhaps that these events were flukes?

• Video of bleeding in the previous page?

  I have a video on the second stack / folio (page 2) that wants more bleeding in the first pile / folio (page 1) when hit to swipe to stack / folio (page 1).  It lasts only for a second and I know what is considered done part of the video that extends beyond the page into battery / folio (page 2), but I've cropped it by the container for the width of the page, but she still wants to do this purge for some reason any?

  The same does not occur when slide forward to stack / folio (page 3).

  

  Any help or suggestion would be appreciated.

  Thank you

  Ryan.

  I guess the video is on autoplay any on the next page?

  Whatever it is, you can't just change the frame of that video is, you actually have to change the video size and align it on the edge of the page, ensuring that there is no overhang when the video plays, not only with the framework.

• Jump in the middle of an audio track streaming on various sites causes the stuttering and audio glitch

  Hello

  Please refer to this thread for support on the technical support of SoundCloud forums. The thread contains all relevant information, including videos of the screenshots problem and console, made by myself and others. https://www.soundcloudcommunity.com/SoundCloud/topics/skipping-to-the-middle-of-a-track-causes-stuttering-and-glitchy-audio-chrome-Firefox

  In short, when you try to move forward for streaming audio, there is a memory buffer/stuttering problem that prevents a correct reading of the track. This problem is confirmed on SoundCloud and Traxsource and other people in the support thread mentioned Mixcloud and other streaming sites. In other words, it is not the special streaming service fault or another.

  The problem does not occur in Microsoft Edge, Internet Explorer or Chrome. Well, to clarify, when the issue was published on SoundCloud support forums, Chrome was having the same problem. However, they made a version a few days ago thrust, that fixed it.

  Here's my original on the SoundCloud support post (less), which has the relevant details. Note that we have updated both Flash and Firefox recently, so although I have mentioned earlier in my original post, everyone involved has since updated their browsers and Flash.

  From now on, the only solution for the problem is to go back to Firefox 40.0.2. Thanks for any help =)

  Matt

  Original message =.

  Jump in the middle of a track causes the stuttering and audio glitch (Firefox).

  I am running Windows 10 Pro.

  There seems to be a problem of caching that affect reading - I started noticing this problem three or four days ago. Previously, I could jump through my feeds at will, go straight until the middle of the tracks or mixes of listen seconds and determine if I liked the track. Now, I can't do it on Firefox 41.0.1. The problem is simply annoying on songs that are 3 or 4 minutes in length, as I must leave "cache" maybe ten seconds before jumping. Unfortunately, the problem is a game-breaker on mixtures which, for example, are 90 minutes long. If I jump to a point directly in the middle of the combination, nothing happens. The play button alternates between the 'Play' symbol and the symbol of 'Caching' ('... "), and so audio resumes, it is glitchy and consists of different parts of the track being played at the same time.

  I've eliminated my internet connection as the source of the problem by loading on board. On the edge of 20.10240.16384, the problem does not exist. I can scroll down to any mix of 2 hours in my stream, click on the middle of it, and the audio starts right up. No caching, without stuttering or glitching.

  I drove back Flash version 18 to see if it solved the problem in Firefox, but it did not. The problem persisted, so I re-updated to Flash 19.

  Yes, I understand how all versions and updates to work. I meant it as a generation of powder magazine. My bad.

  I consider this problem to be solved. Several different pre-release versions of Firefox have solved the problem; I have personally used both of them that work perfectly. A representative of Bugzilla stated that the patch will be integrated into Firefox 42, which will be released on 3 November.

  https://www.soundcloudcommunity.com/SoundCloud/topics/skipping-to-the-middle-of-a-track-causes-stuttering-and-glitchy-audio-chrome-Firefox?topic-reply-list [Settings] [filter_by] = all & question-answer-list [parameters] [reply_id] = 16269116 #reply_16269116

  I now consider this private matter. Thanks to all of you who have been here =)

• Skype or last update causes the disconnection, accidents

  Have used Firefox for several years. Today, I was forced to upgrade to Skype 7.1. Immediately after the installation of Skype, Firefox would be is more to connect to internet or load web pages (tab "connection... ("say forever). Other applications and browsers work fine and there is no interruption to the internet connection of the PC. After about 2-3 minutes of this, Firefox will crash if left alone.

  After that, firefox.exe remains as a process and can never be completed. I try 'end process' and 'End process Tree' in the Manager of tasks without success.

  Firefox remains a task in the Manager of tasks forever, even when the browser window is closed. If I try to re - open Firefox from there, I get the error "Firefox is already running but is not responding". When I click on "Close Firefox", I get a new error message that says: "cannot load your Firefox profile. It may be missing or inaccessible. After that I'm 'OK' of this, I can't do anything else that to restart the computer to get rid of firefox.exe Manager tasks... and then the cycle repeats.

  Not sure if Skype is to blame that Firefox updated itself today. I blame Skype because it was the same Weird hanging in the Task Manager without ever closing until I disabled the video processing in Skype (and due to the suspicious timing).

  I tried clean re - installed, running Firefox with disabled modules and re - install Skype as well. Same behavior in all cases.

  Any suggestions? Note that I am submitting this from another machine.

  This may mean that a loaded program is causing the problem.

  What type of blocking programs do you use?

  Check the programs that are on your computer

  Windows: Start > Control Panel > uninstall programs.
  Mac: Open the folder "Applications".
  Linux: See your user manual.

  Go through the list. If you find something that you do not
  know what it is, use a search on the web.

  The problems of Firefox caused by malicious software {web link}

• When you watch a video on Facebook, etc., the video part freezes and the sound continues to play until I have spend on them... Same video works fine on Chrome?

  When you watch a video on Facebook, etc., the video part freezes and the sound continues to play until I have to go over it. I use Wuindows 7. The video will restart when I pass this pointer/mouse.
  The same video (s) works correctly when you use Chrome?

  This issue may be caused by malicious software.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

  Make a check of malware with several malware scanning of programs on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

• Why can't I see the pre-recorded videos of TV via the media library?

  When I open the Windows Media Center on my new Toshiba laptop, that I go as far as to check the recorded TV shows. I can click on the thumbnails, but the videos won't play.
  I get an error message on videos that I tried that says there is a problem viewing this video, please try to view another. None works!

  Windows Media Center has been installed as part of Windows 7 Home premium installed on the computer, Microsoft Silverlight also seems to be installed ok.
  The photos section works perfectly, pulling the info from my photos. You can give me any advice as to what is causing the problem.

  I was using Internet Explorer 9 (32-bit) as a Navigator, but that also gave me problems with Java script if I try to open a video using the Bing search engine. However if I use Mozilla Firefox (now my default browser) or Google Chrome and go to the video player via the MSN Web site I can watch videos without problem.

  I have Flash Player version 10.3,183,5 installed, I also tried version 11 (64-bit of the trial) when using Internet Explorer 64-bit version, but were advised not to use it.

  The laptop has all the right features to run this program.

  Thank you

  Can you please tell us first what model of laptop you have exactly?
  When you use recorded TV tv you can watch the sample movie?

• I want to generate a pulse of a meter train and count the pulses with the other counter on a USB NI DAQmx 6259.

  
  

  Salvation;

  Here is the solution for your problem.

  The cause is that "Gen dig Pulse Train-Finite" uses Ctr0 both Ctr1.

  Please refer to:

  "When you do a finite pulse train generation, a counter generates pulse train, and the other counter generates an impulse that acts as a barrier to the first counter. If you change the pulse train to generate continuously or

  only generate a pulse, you can run two tasks of meter at the same time without error. »

  http://digital.NI.com/public.nsf/allkb/04BEDD9E9E91ED3486256D180048116D

  I used Ctr0 and Ctr2, jumping Ctr1 as it is reserved by "" Gen dig Pulse Train-Finite ". I works very well.

  Kizito.