View internal, external direct connection in the tunnel?

Today we use XP virtual machines with view 4.0.1 only internal direct connect (need this to our Sun's rays). But now, we want to use our XP virtual machines to internal direct connect and externally by tunnel via the SSL protocol. What do we have to do for that?

My idea is to install a server security in the demilitarized zone and a new second login view without direct connect server, is the right way?

If so, we can allow the same VM XP for internal and external direct connection in tunnel?

That's how we have our configuration of the environment.  You can configure the type of connection to the server by going to the page view Admin, configuration, servers.

If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

Tags: VMware

Similar Questions

  • "Direct connection to the desktop" and external clients

    Hi all

    I'm doing a View 4 u1 installation with a connection to the server and a security server. I just want to confirm with the setting to view administrator, check box "direct connection on the desktop.

    I find that if I check it, then external clients of internet do not work - can see the office pools, but at launch, the customer will see appear in the taskbar, disappear. When I uncheck, all external clients work very well.

    my understanding is that this check box determines whether RDP traffic will be dug by the connection to the server or it will go straigh from the clients to view offices. I though that this setting affects only internal clients. I don't see how it affects external clients that connect through the Security server.

    When you look at 'netstat' of external clients, trying to run the office, I can see the threshold to appear when the customer view disappears, it will also disappear. Looks like when the box is check (direct connection), the client view external attempts to establish the RDP directly on desktop computers, apparently, it won't work. So, how can a direct connection for internal clients only?

    TCP 192.168.20.2:56473 winxp - 04:ms - wbt-Server SYN_SENT

    any ideas?

    Thank you

    Ming

    In our environment, we have our external users (Security Server) use a broker who has direct connect disabled while internal users use a different set of brokers that are defined to use direct connect.

    If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  • Direct connection to the view Agent Linux?

    Is there an implementation linux plugin for direct connection from the view of the PicoIP client (I use VMware View on Mac) on a Linux desktop?

    I just wanted to put in place a set of virtual machines Linux to be accessible by customers to view, Mac. Also intend to do not use a view connection server. I installed a virtual machine to test with Ubuntu top end and configure the Agent as well.

    Direct connection is not supported. You must configure a login server in your environment.

  • Time Machine backup to external drive connected to the TimeCapsule

    I have a 3 TB TimeCapsule, that contains the my iMac TimeMachine backup. So far so good.

    Now, I would like to connect an external drive to the TimeCapsule via the USB port to allow access to this drive of my iMac as well as other computers on my network. I would like to than the external to include in my Time Machine backup drive. Is it possible - by accepting that the backup of obviously only runs when the Mac is on? If this isn't the case, other methods of backup to an external drive, connected to the TimeCapsule, may be recommended?

    You can do it. Time Machine it will support up to a separate folder on your backup disk. Don't forget to remove it from the exclusions list in Time Machine preferences. I don't know if others cannot see the drive connected to your computer is turned off. They may be able to mount the drive on their computer as you do on yours. Try it because I could be wrong on this matter.

  • Internet does not connect unless it is directly connected to the computer

    This problem occurred yesterday.

    Internet has suddenly stopped working. Things were going to turn power off, then on and distributed. I did check the lights on the modem and the router, but they were all working well. I have plugged on both computers. This does not solve it. I called Charter to see if there was a failure. Unfortunately, it's a message auto troubleshooting which I have materialized with. He had me hang my modem directly to my computer. This solved my problems of the internet.

    I went to sleep for the night in the hope that the internet, or what the question was, would fix itself. He did not. The internet still works only if it is directly connected to the computer.

    There are other people who need to use the internet here. (Invoices, work schedules and other) So maybe it's very much a problem. Any other computer or phone, will work in the House.

    What is a router problem or a cable, or...?

    If your connection works when you plug the modem but not through the router, this indicates a problem with the router.   This could be a hardware failure or a configuration problem.  A problem with the cable between the modem and the WAN port on the router is possible, but unlikely.  It wouldn't hurt to check if she.  Most routers have a reset button recessed.  I suggest that you reset the router and reinstall as if new.  If this fails, you probably need to replace the router.

    Depending on your technical knowledge, you can also log in to the router and check the status information.

  • to reach a server on a VLAN that is not directly connected to the inside interface

    scénarion

    PIX 515

    6506 core with VLAN A, B, c. (intervlan routing is ok)

    vlanC is directly connected to the inside interface of the fw

    question

    How a crowd outside could reach a server ServerA on vlanA.

    Hello

    Concerning Point 1, Yes if the roads required for networks connected inside the network is done on pix.

    Concerning Point 2, if the IP address that you use within the network is routable (public IP), the command you gave will work. The command indicates that when 10.10.1.10 inside the network host wants to go outside the network, use the same IP address. Because NAT does not occur, the actual address of the server presents itself as the visible address and the address of the host. So if the IP address you specify is not a public IP address, outside world can't access.

  • Where is the check box "Direct connection" to the pool passed in View 4

    Hi all

    I don't seem to be able to find the box of "Direct connection" who was there on view 3, in order to allow desktop computers once they have made the initial connection to the broker, for you to connect directly to the office. This has been deleted?

    I can see the "direct connection to workstations in offline mode" which is a global setting, but not one for standard pools.

    Any help / pointers greatly appreciated.

    Thank you

    Dan

    No, it has not been deleted.  It is available on a per server in the configuration on the screen from view admin tab basis.  Once in a configuration just click on servers, select the server you want to change the direct connect and change this server.

    If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  • Change of keyboard USB external Apple connected to the Macbook Pro

    Dear ladies and gentlemen,

    I need your help. I have a MacBook Pro running the last Sierra 17 "MacOS. I bought a 27 "Thunderbolt display and wanted to use a full external keyboard USB Apple (with the help of the digital keys). I have connected to the screen "USB port, closed down the internal screen MacBook... magic happened... keyboard poped office to the top of the screen external AND external full resolution was working properly..." Unfortunately only for 1-2 minutes, then the layout changed back irreversible in a layout resembling the layout if I would press "alt". Only way I could "resolve" to disconnect the keyboard USB plug and then plug again... but after 1-2 minutes did the same thing...

    I tried to plug the USB plug into the MacBook Pro directly, but the same thing happened...

    I am so unhappy that I can't use correctly the full length external Apple keyboard, large... Any hint/resolution?

    Thank you for your help in advance,

    Péter

    System Preferences > keyboard > Input Sources > [√] see Input menu in the menu bar

    ... then the menu icon before, choose «Show Keyboard Viewer»

    Now, look at the chart of the keyboard that appears on the screen. If the Alt/Option key is stuck, the key will be gray, as if it is held down. If you press it again, he himself is not?

  • Drivers to be used on networked computers that are not directly connected to the HP Laserjet M1536dnf MFP

    Hi, I had problems connecting to computers on the network for printer. The printer is HP LaserJet Pro M1536dnf MFP. The computer that is connected to the printer directly via USB is fine. I downloaded solution complete driver installation on the site of hp, them and everything's fine. the problem is with the computers on the network, they cannot detect even the computer to add printer. And I have enabled file sharing and printer sharing advanced options of sharing on all computers. I also tried to install the same drivers I used on the local computer on the network computers, but its does not work. Please kindly advise me on which particular driver should I use or the solution.

    for this one, there was a simple solution... I forgot one small thing. After the installation of the complete solution from hp printer drivers on the computer connected to the printer via the usb port you then go to control panel > view devices and printers > click with the right button on active printer installed > printer properties > sharing > click on the list to the Director. that allows other computers on the network to view the printers.  was a bit stupid coz the solution was so simple.

  • HP Officejet Pro 8610: printer directly connected to the Internet

    I'm trying to register for the HP ink cartridges.  The application calls a code to write on request.  However, the printer tells me that Web services are not enabled on my printer.  How can I connect a printer directly to the Internet.  I use a USB cable to connect the printer to my laptop.  Can someone help me so that I can complete the application of the ink?  Thank you!

    mcbrighde

    Hello @mcbrighde,

    Welcome to the Forums of HP's Support. I understand you are trying to join the instant ink program, but need assistance in obtaining your printers code request. I would like to help.

    In order to get the printers claim code, you will need to have the printer on a wireless network. An ethernet or LAN connection will also work. This will give the internet access to the printer so that the ink levels can be monitored.

    You need not remove your USB connection for the printer on the wireless network.

    The following link will help put your Officejet Pro 8600 on the wireless network.

    HP OfficeJet printers - printer wireless (Windows) installation

    Once the printer on the network, tap the icon of ePrint/Web Services to enable Web Services and acquire the printers claim code. The icon you are looking for is in the lower left corner of the screen printers.

    You can also use the following link to view more detailed instructions.

    HP - service and using HP ePrint printers

    If you need further assistance or have any other questions please let me know.

    I'll be happy to help you.

  • Direct connection on the desktop - clients still losing access when the server goes down or rebooted service

    I set up the connection to the server with a link Direct is TICKING, I did that once the initial connection has been made for the broker and an assigned desktop computer, connect directly to the desktop and so not care about the State of the connection to the server. After restart or just restart the VMware View Server service all customers lost access until it is facing up.

    Is it right, that we use View 3.1.

    Thank you

    It's strange that I can restart my server connection without worrying about all the users.   How brokers connection you have and do you have activated all at direct connection?

    If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  • NAT9914 - direct connection to the GPIB bus

    Hello

    I have some experience with NAT9914xx.  I understand, from various sources, this ASIC is connected to the GPIB bus through a Transceiver ICs, i.e. it SN75ALS160 and SN75ALS162.  While I'm waiting for the part, I wish I can perform some tests.

    So here's the question: If the only devices exist on a GPIB bus is my test Board and a GPIB equipment, can I have the NAT9914 on my board test connected directly to the GPIB bus without using the transceivers?

    Thanks & best regards,

    Tan of WH

    Hello

    These transceivers are absolutely necessary to communicate with GPIB instruments.  It's why they're in the hardware section of the manual 9914.  Transceivers will display correct tension/line transitions.  Without them, there will be errors in communication.

    I hope this helps.

    Steven T.

  • Discover device directly connected to the cisco ASA

    How do I know which is directly connected to an ASA interface? I'm looking for some commands that can be executed on the SAA to find the directly connected Cisco device.

    Thank you

    Boudou

    Unfortunately it is not available on SAA for you tell what device is directly connected to it, there is no 'see the neighboring cdp' on SAA unfortunately.

    You can check the ARP table and see which is the next hop, but who would only give the layer 3 device, such that there could be a switch between the two institutions.

  • Maintenance of the internal DNS after connecting to the VPN Client

    We connect to the VPN client, all day and I wanted to know if there is a way to continue to use our internal LAN DNS when you are connected. For example, when I connect to the VPN client, our mail server internal and the dns resolves the public IP address.

    Thank you

    You can set up the split-dns service, but which can be configured at the vpn your client device, because you only connect with vpn client and normally politicians vpn client get pushed vpn headend unit.

    Here is the split-dns command if your customer comes to run ASA firewall, and they allow you to configure:

    http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/S8.html#wp1404571

  • View is not to connect to the event db and error unable to connect to the db

    Hello

    while trying to connect the event dB view, I encounter a weird problem where, by getting "unable to connect" error message.

    in the error log I get below error also can you pls help.

    TP-Processor1 > code [ConfigurationManagerBean] ADAM Error: 2 128 com.vmware.vdi.admin.ui.ConfigurationManagerBean.updateDatabaseConfiguration(SourceFile:181)

    com.vmware.vdi.adamwrapper.exceptions.ADAMServerException: database initialization failed, SQL exception when connecting to the database: TCP/IP connection to host failed. java.net.ConnectException: connection refused: connect

    at com.vmware.vdi.admin.be.ConfigurationManager.a(SourceFile:1703)

    at com.vmware.vdi.admin.be.ConfigurationManager.updateDatabaseConfiguration(SourceFile:1580)

    at com.vmware.vdi.admin.ui.ConfigurationManagerBean.updateDatabaseConfiguration(SourceFile:177)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

    at java.lang.reflect.Method.invoke(Method.java:606)

    to com.vmware.vdi.admin.ui.common.ViewFlexFactory$ ViewProxy.invoke (SourceFile:113)

    to com.sun.proxy. $Proxy56.updateDatabaseConfiguration (unknown Source)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

    at java.lang.reflect.Method.invoke(Method.java:606)

    at flex.messaging.services.remoting.adapters.JavaAdapter.invoke(JavaAdapter.java:418)

    at flex.messaging.services.RemotingService.serviceMessage(RemotingService.java:183)

    at flex.messaging.MessageBroker.routeMessageToService(MessageBroker.java:1400)

    at flex.messaging.endpoints.AbstractEndpoint.serviceMessage(AbstractEndpoint.java:1011)

    at flex.messaging.endpoints.amf.MessageBrokerFilter.invoke(MessageBrokerFilter.java:103)

    at flex.messaging.endpoints.amf.LegacyFilter.invoke(LegacyFilter.java:158)

    at flex.messaging.endpoints.amf.SessionFilter.invoke(SessionFilter.java:44)

    at flex.messaging.endpoints.amf.BatchProcessFilter.invoke(BatchProcessFilter.java:67)

    at flex.messaging.endpoints.amf.SerializationFilter.invoke(SerializationFilter.java:166)

    at flex.messaging.endpoints.BaseHTTPEndpoint.service(BaseHTTPEndpoint.java:291)

    at flex.messaging.MessageBrokerServlet.service(MessageBrokerServlet.java:353)

    at javax.servlet.http.HttpServlet.service(HttpServlet.java:723)

    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)

    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

    at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:646)

    at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:436)

    at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:374)

    at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:302)

    at com.vmware.vdi.admin.ui.servlet.AMFProxyServlet.a(SourceFile:90)

    at com.vmware.vdi.admin.ui.servlet.AMFProxyServlet.doPost(SourceFile:57)

    Hi James,

    It's a SQL API based in the event database connection, it does not need an ODBC connection, see will do for you.

    I just wanted to know what operating system you are using to connect to the server and did you do Windows Update on this machine? If not done it please do.

    restart the machine try connecting the event database. It does not work please check the things mentioned in the KB below

    http://KB.VMware.com/kb/1029537

    You can do one more thing before checking the KB, if the connection to the server OS is windows 2012 and the SQL Windows 2012, take a snapshot of the VM Server conection and proceed to

    under location

    C:\Program Files\VMware\VMware View\Server\broker\shared\lib\sqljdbc-1.2.jar

    Stop all the service view in the connection to the server.

    sqljdbc - 1.2.jar and rename sqljdbc - 1.2.jar.backup.

    Download SQL JDBC 3.0 driver http://www.microsoft.com/en-us/download/details.aspx?id=21599

    extract the downloaded file and copy the sqljdbc4.jar to location (C:\Program Files\VMware\VMware View\Server\broker\shared\lib\)

    also copy same file once more and rename the file to sqljdbc-1.2.jar

    Restart all services server connection and wait 10 minutes, then check the admin page.

Maybe you are looking for