View of album for CD with several discs

Similar Questions

• Windows 7 product key for OEM with the disc no valid retail install. problem from 32 to 64-bit?

  I bought a CD OEM Windows 7 a few years when Microsoft was running a promotion for students to go to College.  It was directly from Microsoft, if I remember.  It was just a single CD, just a 32 bit disc and had the CD key.  Installed and everything worked well.  I have clean same Win7 installed again on the same machine a bit down the line.

  But I'm upgrading my computer parts and to move to an SSD and use my old HD that has Win7 installed as my main document reader.  I also want to use 64 bit (which takes care of my computer).  I had misplaced my original disc, but was able to borrow a friends to install Win7 64 bit.
  The problem that I am running is that, after I installed Win7 and entered my CD he said that it was not valid.  Is the CD key, I got only valid for 32-bit?  Which really sucks if it is haha.  Or is there a problem with the clean installation using a key on a DVD retail OEM?  Like I didn't have this problem when I clean installed since the OEM CD, I had until I lost it.
  Thanks for any info!
  -Anthony

  I bought a CD OEM Windows 7 a few years when Microsoft was running a promotion for students to go to College.  It was directly from Microsoft, if I remember.  It was just a single CD, just a 32 bit disc and had the CD key.  Installed and everything worked well.  I have clean same Win7 installed again on the same machine a bit down the line.

  It wasn't an OEM license, this is a retail upgrade license.

  But I'm upgrading my computer parts and to move to an SSD and use my old HD that has Win7 installed as my main document reader.  I also want to use 64 bit (which takes care of my computer).  I had misplaced my original disc, but was able to borrow a friends to install Win7 64 bit.

  They are same edition, if they are not the same edition, the product key will not work. Architecture (32 or 64-bit) has no importance.

  The problem that I am running is that, after I installed Win7 and entered my CD he said that it was not valid.  Is the CD key, I got only valid for 32-bit?  Which really sucks if it is haha.  Or is there a problem with the clean installation using a key on a DVD retail OEM?  Like I didn't have this problem when I clean installed since the OEM CD, I had until I lost it.

   

  Firstly, is this the same edition.

  Second, its update, not an OEM license, the meaning:

   

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   

  
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  Thanks for any info!
  -Anthony

• performance-sql for table with several lines

  I have a database table that contains information that allows me to determine certain information processing to the breast of a proxy service. I want to be able to get (multiple lines) data from this table.
  
  When I use execute sql it returns only a single row where more than one are expected.
  
  Anyone aware of several rows of a table within the OSB?
  
  Thank you

  Hello
  give something like this in the expression editor...
  {} - run sql('DataSource','Record','select * from...')

  The reason for which you receive only one record is that the return type of this function would be a bunch of files, it would be like... .... ...
  But this return value is not consistent with an XML document because... you will notice that there is no element root for the records...

  For more to come this., wrap the function with any xml tag that acts as a root... in this case...

  Kind regards
  Manoj Nair...

• How to get LR5 desk for laptop with no disc drive

  How can I get my LR5 loaded on my iMac copied on my MacBook Pro, which doesn't have a disc drive?

  You don't want to copy/move any software from one computer to another.  Download the installation files for your MacBook Pro from the Adobe site instead.

• Newbie request for assistance with several drag-and-drop & multiple targets

  I know that this question has been asked a million times, but I get always very well the solution.  I know that the solution called for me the use of tables in a part of my code, but I have problems understanding how to implement it.  I use Flash CS 5.5 with AS3.

  I have a flash drag-and-drop file which is divided into 4 distinct zones on the stage.  On each box, there are 7 places, for 7 different "puzzle pieces".  The first two spaces on each quadrant have very a very specific order for the correct puzzle pieces, while the 5 additional places on each quadrant also have specific parts, but the order is not important.  I have included my code below for reference (note that I have not all instances, finished yet).

  Basically, in code that's been created, the following bodies have specific targets with specific command:

  D1_1_mc, D1_2_mc, D1_1_mc, D2_2_mc, D3_1_mc, D3_2_mc, D4_1_mc and D4_2_mc.

  All other instances, such as D1_3_mc, D2_3_mc, D2_4_mc, etc. have specific quadrants on which they need to fall, but what about the last 5 'spaces' in each quadrant, the order does not matter.  I know that I can continue to do what I do, but I would have preferred that the last 5 pieces on each quandrant do not have to be in a specific order.

  You can provide any assistance is greatly appreciated!

  var startX:Number;

  var startY: number;

  var counter: Number = 0;

  D1_1_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D1_1_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D1_2_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D1_2_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D1_3_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D1_3_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D2_1_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D2_1_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D2_2_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D2_2_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D2_3_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D2_3_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D2_4_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D2_4_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D3_1_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D3_1_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D3_2_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D3_2_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D3_3_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D3_3_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D4_1_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D4_1_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D4_2_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D4_2_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D4_3_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D4_3_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  D4_4_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  D4_4_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  function pickUp(event:MouseEvent):void {}

  event.target.startDrag (true);

  reply_txt. Text = "";

  event.target.parent.addChild (event.target);

  startX = event.target.x;

  startY = event.target.y;

  }

  function dropIt(event:MouseEvent):void {}

  event.target.stopDrag ();

  var myTargetName:String = "target_" + event.target.name;

  var myTarget:DisplayObject = getChildByName (myTargetName);

  If (event.target.dropTarget! = null & & event.target.dropTarget.parent == myTarget) {}

  reply_txt. Text = "Good Job!"

  event.target.removeEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  event.target.removeEventListener (MouseEvent.MOUSE_UP, dropIt);

  event.target.buttonMode = false;

  Event.Target.x = myTarget.x;

  Event.Target.y = myTarget.y;

  counter ++;

  } else {}

  reply_txt. Text = "Try Again!";

  Event.Target.x = startX;

  Event.Target.y = startY;

  }

  if(Counter == 5) {}

  reply_txt. Text = "congratulations, you did!"

  }

  }

  D1_1_mc.buttonMode = true;

  D1_2_mc.buttonMode = true;

  D1_3_mc.buttonMode = true;

  D2_1_mc.buttonMode = true;

  D2_2_mc.buttonMode = true;

  D2_3_mc.buttonMode = true;

  D2_4_mc.buttonMode = true;

  D3_1_mc.buttonMode = true;

  D3_2_mc.buttonMode = true;

  D3_2_mc.buttonMode = true;

  D4_1_mc.buttonMode = true;

  D4_2_mc.buttonMode = true;

  D4_3_mc.buttonMode = true;

  D4_4_mc.buttonMode = true;

  Since it seems to afew possible gaps in the code you showed, and what I offer myself in response to your questions, I spent a little time get a working model of what I guess you just using the three targets and the fall of four objects.  If you want, I can make the file available for you, but for now, here's the code that works...

  var startX:Number;
  var startY: number;
  var counter: Number = 0;

  target_D2_1_mc.allowed = new Array (D2_1_mc);
  target_D2_2_mc.allowed = new Array (D2_2_mc);
  target_D2_3_mc.allowed = new Array (D2_3_mc, D2_4_mc);

  D2_1_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);
  D2_1_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);
  D2_2_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);
  D2_2_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);
  D2_3_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);
  D2_3_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);
  D2_4_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);
  D2_4_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  function pickUp(event:MouseEvent):void {}

  reply_txt. Text = "Good Luck."
  event.target.startDrag (true);
  event.target.parent.addChild (event.target);
  startX = event.target.x;
  startY = event.target.y;
  }

  function dropIt(event:MouseEvent):void {}

  event.target.stopDrag ();

  If (event.target.dropTarget! = null & MovieClip (event.target.dropTarget.parent).allowed.indexOf (event.target) >-1) {}
  reply_txt. Text = "Good Job!"
  event.target.removeEventListener (MouseEvent.MOUSE_DOWN, Pick-up);
  event.target.removeEventListener (MouseEvent.MOUSE_UP, dropIt);
  event.target.buttonMode = false;
  Event.Target.x = MovieClip (event.target.dropTarget.parent) .x;
  Event.Target.y = there MovieClip (event.target.dropTarget.parent);
  counter ++;
  } else {}
  reply_txt. Text = "Try Again!";
  Event.Target.x = startX;
  Event.Target.y = startY;
  }

  if(Counter == 5) {}
  reply_txt. Text = "congratulations, you did!"
  }
  }

  D2_1_mc.buttonMode = true;
  D2_2_mc.buttonMode = true;
  D2_3_mc.buttonMode = true;
  D2_4_mc.buttonMode = true;

• Relative paths for assets with several users of Muse

  I have created a shared folder in Dropbox that allows different people with responsibility for editing my site, each with a licensed copy of Muse, to access the files of Muse. All the assets required for the sitting next site or in a subdirectory under the main file of the Muse.

  But because the literal path for the dropbox folder (or any other shared folder, I guess) contains his username, and because the link point to the shared folder can be arranged differently on their machine (some people mount dropbox in 'Documents', others also), the literal path to the file to Muse is distinguished by the user.  I guess this is true even on the same computer with different users.

  As a result of these literal paths differ, at the opening of the Muse site, even when all assets required by the site are in the same folder or subfolder as master of muse, each user is asked to re-edit the link active whenever they open it after someone else has and can of the moment of their side.

  There is no way to have Muse look relative paths instead of the railways literal to avoid this?

  Unfortunately, it is not possible to watch right now the relative paths instead of literal. It's a good request well and I'll take it to the top with the development team!

  Muse auto-liens all assets after the first warning of dialogue, however, correct? And out of curiosity, how this multi-user workflow going for you?

• Closure of a state machine in queue event with several parallel loops

  I am trying to find the best way to stop a program that consists of an architecture of State machine in line waiting for event with several parallel loops. Can anyone recommend the best way to achieve this in my attached VI? (To browse the forum, this seems to be a frequently asked question, but I have not found a solution that works for me.)

  I look forward to any comments on my as well code, if someone is willing to offer it.

  My program needs:

  If the user press the 'Stop' button, the program should prompt the user with "are you sure you want to stop the program?" and then return to a State of rest or move forward to stop the program. In addition if there is an error, the program should prompt the user to ' clear the error and continue, or stop the program. Then back to the idle state or move forward to stop the program.

  Architectural details:

  The program consists of 3 parallel loops: (1) a loop of event management that places different States of a queue of the State, (2) a State Machine that enters the State that is removed from the queue of the State and (3) a loop error/Shutdown, which deals with errors in the error queue management.

  During normal shutdown, where running handling loop in the case of event 'Program.Shutdown' and 'Shutdown' and the 'Idle' States are added to the queue of the State. In the state machine, the State of 'Stop' is invoked. Special "5000" error code is added to the queue of the error. In the loop of error handling and stopping, "5000" error triggered a prompt that asks the user if they want to stop the program. If the user chooses not to stop, a notifier StopNotif is sent to the State of 'Stop' and 'Program.Shutdown' event case with notification 'Go '. If the user decides to stop, the Notifier sends the notification "Stop". Loop and event management State Machine ends when they receive the notification "Stop".

  In case of error, the program behaves in the same way: If the user chooses to clear the error and continue, the program returns to the status "pending".

  HOWEVER - if the user chooses to stop the program, the program crashes. The author of the notification that is sent to stop the loop of events and State Machine management cannot be read because event Program.Shutdown and the stop State (which contain the function "Waiting to notify") are not active.

  I was able to activate the stop State by Queuing in the loop of error/Shutdown management. But I don't know how to activate the "Program.Shutdown" event by program and thus access the function "Waiting to notify" inside.

  I tried to put the function "Waiting to notify" outside the structure of the event, so the event-handling loop never ends. Placing timeouts on the "wait for declaring" and the structure of the event makes the programme of work, but I want to avoid using timeouts because I don't want to turn my event program into a program of polling stations. I would also avoid using variables or nodes property to stop loops, because that requires the creation of a control/indicator for something that the user does not need to interact with.

  Thank you!

  First of all, close the notifier outside loops with your queues.  Second, you must use a user event to send the message to the event structure loop so that it stop in the case of the stop on an error.

• Can non-Apple users really share a Photo album - for example, adding images to it - or can they simply view a web link that I send them?

  I have iCloud Photos active and fully work / sync on my Mac, iPhone and same iCloud on a PC.  I created a folder shared and sent invites to 2 PC users only. They never receive the prompt (re-sent several times) or get a message not available on your system if they try and accept the invitation.  Sending them the web link that the window share me offer allows them to see the images in the folder via a browser - but they cannot comment on or add new images.

  So, is full of sharing limited to the Apple world, or am I missing something?

  Hi cclift1,

  Welcome to the communities of Apple Support! I apologize for any confusion over the shared Albums. Although any user can view an album shared via the web link, you reason that to work with this album (photos/video post, comment, etc.) they would need to be on an Apple device or have iCloud installed on their Windows, such machine as mentioned in this article:

  What do I need see and share videos, contribute to someone of another shared album, and add comments or like photos and videos?

  • iPhone, iPad or iPod touch with iOS 7 or later
  • Mac OS X Mavericks v10.9 or later and iPhoto 9.5 or opening 3.5
  • Apple TV (2nd generation) with software from the Apple TV version 6.0 or later
  • PC with Windows 7 or later and iCloud for Windows (or iCloud Control Panel 3.1 or later version)

  If the owner of a shared album activates the Public website option and share the link with you, you can use any browser to update to see photos and videos added by the owner and all contributors.

  Get help using iCloud, sharing photos and shared albums - Apple Support

  Concerning

• Creating a DVD with several file format of files/best project for export (PE13)

  Hello! I first 13 (just improved 10) elements and trying to figure out the best way to save my movie on DVD. There are at least two different project files (the film, shock and eventually a video "making of") that I want to put on the same DVD with a menu. A couple of years, trying to do this with first Elements 10, I could not get it to work and had to use a separate DVD menu software. I can do that again, if I need to, but the software I used was lost, so I thought I would check to see if it can be done first before going to buy it again.

  If I can't do it in first, I need advice on the best format to save project files to burn to DVD later. I'm a novice, and most of these sizes looks like gibberish to me! I had problems in the past (a few years ago) with a black border appears around the film, after he was saved, reducing the size of the movie, and I'm hoping to avoid that...

  The film is about 1 1/2 hrs long

  The blooper reel is about 17 minutes

  If there is more info to help answer my questions I'll be happy to find it!

  alsyarn

  Thank you for the important information for troubleshooting your Premiere Elements burn on DVD-VIDEO to DVD disc so that it presents throughout without black borders.

  Open the first elements 13/13.1 to his Expert workspace, go to file Menu/New/Project and set the project preset manually to

  NTSC

  DV widescreen

  Do follow the following order

  • Open the project in the workspace Expert and go to file menu/new project and change the settings.
  • In the settings, set the project preset to NTSC/DV widescreen. OK to get out of there.
  • In the dialog box new project opens, rename the project and make sure you have a checkmark next to the "Force selected setting on this project." OK to get out of there.
  • In the Expert workspace, import your media source by using Add Media / choice.

  Import your Source 3 (720 x 480 widescreen display 16:9) - which should occupy all the space area monitor Edit which is a space of DV widescreen size.

  Import your Source 1 (1920 x 1080 16:9)-that must fill the space of the monitor Edit once the scale is automatically just to fill the space of the Edit monitor.

  Import your Source 2 (720 x 480 which is what is because it has a format of 1.0 pixels)-that does not fit properly. Balance this video in Edit area monitor to enter space monitor without black borders.

  It is unclear why the project 720 p settings have been set for this instead of NTSC DV widescreen. But please implement your project as described above, then export as suggested.

  I have suggested above based on destination DVD VIDEO to DVD disc. When you have a montage with several formats, you set an adjustment everything with scaling in the monitor area space Edit put in place by the predefined project and major. General guideline - the project preset should correspond to the properties of the media source... and with more than one type of format, you define major and if adapt everything with scaling if you don't want black borders.

  Another tip... When you want to scale width and height separately in edit box monitor, first go to applied effects tab/Applied effects Palette/panel of the selected clip expanded Motion and remove the box keep the Proportions.

  Please consider. And then we'll try to condense all that into a workflow that will work for you.

  Thank you.

  RTA

• View 5 with several AD environments.

  We would like to deploy VMware View 5/Unidesk 1.6 with the support of several AD environments. We've already seen 5, Unidesk and VCenter deployed in domain A and the work. We would now view offices Geneviève with integration of Unidesk for domain B, but only using a VMware View management console, VCenter and Unidesk who works for the domain has & b. field

  Domain B can be a separate AD and domain forest or just a specific subdomain (domain A child domain). I read that VMware View can support two AD forests separated, if there is a two-way transitive trust between domain A and domain B relationship.  Is this true?  Has anyone actually tried this?

  Do you know if this does not work with Unidesk? We conduct Unidesk version 1.6 on VSphere 5 and 5 view server ESxi 5.00 with backend storage back-end FCoE 10 g.

  Any help or advice would be greatly appreciated.  Thank you for your time.

  Oh I tried this several times and tried every facility that I could think about this field.

  I recently tried to get the response from VMware on support for areas not Trustees, but they said maybe in the future "releases".

  I would really like Microsoft Federation Services to be supported in view. Which would increase the chance of being able to create a real DaaS.

  But enough of me rambling on my problems

  The only thing you need to do this work is a two-way. Creation and management of the computer virtual will be in the same Management console, vCenter (as users can be authenticated on the other domain).

  I was not able to get my hands dirty with Unidesk but I don't see anything that would break the configuration as two-way - approval means two-way authentication.

  Good luck.

• Shortcut for the new window with several tabs

  Is it possible to have a shortcut on the desktop to launch a new window with several tabs? For example - home page is set to "www.google.com", but the shortcut opens new window with tabs "www.cnn.com" and "www.youtube.com".

  Then far,.../firefox.exe-nouveau-fenetre followed by the two URL in quotes will open two new windows. Entry - new-window "www.cnn.com" - new-tab 'www.youtube.com' will open two new windows if no instance of firefox is open, but if another window is already open, youtube will add a tab to the already open window, rather than the new window with cnn.com

  In reply to myself... withdrawal-order new window (and-new-tab), now it works.

  Looks like I'm too complicated it.

  shortened final was "C:\Program Files (x 86) \Mozilla ' 'url1'"url2.

• When you attempt to load an album for listening offline with Apple music sometimes only some of the songs on the album are made available. For example, Weezer White Album. Why?

  When you attempt to load an album for listening offline with Apple music sometimes only some of the songs on the album are made available. For example, Weezer White Album. Why?

  What country do you live? Because I just checked this album and all songs should be available in the Apple music - and thus be downloadable. (I live in the US BTW.)

• View a common report on top a dashboard with several pages

  Hello
  
  Is there a way to display a joint report on top a dashboard with several pages? I don't want it to be displayed in each page but it is rather a report on top and then having multiple pages/tabs under and the report should be common to all pages. Basically, a section in a dashboard that is on the top and a child Dashboard itself as another section below. Incorporation of a dashboard within a dashboard displays just the file and not pages.
  
  Any thoughts?
  
  Thank you
  Vikram

  Hi Vikram,

  Can you please try with content embedded in the dashboard page where you want embedded tabs on the dashboard.

  Please let me know if it solves your problem.

  Thank you
  Yacoub

• Export MXF with several audio channels for broadcasting

  Hello

  I work in a company of broadcasting as a Publisher. We have always used FCP with the free plugin sony xdcam to export. This plugin seems to be one of the few ways to export a MXF with 4 audio channels. I don't know exactly why we need to export it for broadcasting with 4 audio channels, but we do.

  Given that our workload has increased significantly in recent months and it will no longer are optimizing our workflow. We also work with many different endboards in After Effects, and we made a nice model to work with. And since AE and first can make a dynamic link we are considering changing from FCP to Premiere.

  Now the question arises! : the only obstacle that we could not find a response to export it with 4 audio channels as a MXF of first CS5. Will there be the development on this level for CS6?

  A solution to this should save us a lot of time!

  Any help will be very appreciated!

  I've also attached an example for standard MXF files we export

  

  CS6 now allow export desired in native mode.

• Missing albums for the album post upgrade

  Since iTunes updated itself to 12.4, Miss me a lot of albums for the Album. As far as I know, these are all compilation albums. They show to songs and artists view (where they are grouped under 'Compilations'). I have the settings set to "Title" overview, so I don't understand why iTunes is unable to recognize them. Thanks for any help...

  This seems to be a bug in the current building with the compilations are not if you use: View > as > Albums and view > sort by > title. Changing options should reveal hidden items.

  TT2