View the programs that are running on the remote computer.
How use remote desktop to view the programs that are running on the remote computer. I connect to the pc remotely is used to monitor a communication system for the alarms. The alarm Viewer application runs as a service. When I connect locally to the computer, I can see the application and view the status of the alarm system. When I connect via remote desktop, I can't. I don't see that the application is running in the services list.
Do you mean the Task Manager?
If so, try using
http://Windows.Microsoft.com/en-us/Windows7/keyboard-shortcuts You might also find something in the PsTools collection...
Tags: Windows
Similar Questions
-
Hello
I close all programs and then I closed my laptop but I see message programs are pending and that I still have programs that run, but actually I did not! I close all! and then after a few seconds it just stops himself well. In my view, there is a problem, why I see this message?
This time, when I stopped my laptop a blue screen appeared saying windows is recovering from an unexpected shutdown. This was not unexpected at all, I closed all programs and all just stop it!
From elsewhere when I press ctrl + alt + del and start the Task Manager I see not all programs that are running.
It's a windows 7 64.
I see message waiting programs so that I still have programs that run, but actually I did not!
Actually closing manually request does not mean that it is not running
Some of the startup item typically run in the background
There is no additional work Windows doesn't do, what application you are running is to show
All you can do is try to disable all start once and go to the service tab and select below "hide all Microsoft services and disable and to apply, it will ask the start/stop and see same problem is happening or not."
Press win + r > type "msconfig" and enter and click on start and select Disable all and restart
-
in Add or remove programs on my computer there are a ton of old program updates from 2008 to 2011 and I want to know if I can remove all but the updates for programs that are running on my computer?
Hello
You can clean your system using the disk Cleanup utility to remove unwanted programs from your system. Click on the link below.
Description of the tool in Windows XP disk cleanup
-
interaction between 2 labview programs that are running on two separate computers
Hello
I have two separate computers and 2 labview programs that run on each computer. labview program is ready for the acquisition of data and the record of the acquired data in a computer. now, I want to send these data acquired by cable to another computer to be processed. first of all, I'm looking for the best protocol to send data between two computers. It is important for me to diliver data near real time about in miliseconds. and finally it is necessary to have any particular type of software?
Best regards
Hi farashi,
you want "diliver data near real time in miliseconds."
Even a GigaBit-LAN has latencies of 100 milliseconds...
When you search for a Protocol, you can read some articles in the knowledge base is located at the Web site of NOR.
And according to the volume of data, you should consider to send data using DataSocket...
-
How to close programs that are running in the background and what services are safe cut
under windows xp with sp3, I hear something running in the background, but no photo with her, how I close it, also how do you know which windows services are safe to clog then start and stop can be a little faster?
For performance tweaks that I would recommend looking at http://www.tweakxp.com/performance_tweaks.aspx they have a great compilation of good settings you can do and more are step by step, so even the most novice person can perform these tasks. Insofar as something running in the background of his always possible, you have some kind of malware running I want to run a scan for these emissions.
-
Yesterday I connected my laptop and when I tried oppening a program a window pops up say "program has stopped working". I opened the control panel to start the troubleshooting, and another appeared window "Control panel has stopped working". I tried to open microsoft word and another window popped up, it is true, that you guessed it "word has stopped working". Does anyone know why all of a sudden nothing works?
Hello
try a SafeMode system restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
I used all the diagnostic tools to rule out a hardware problem, including using a portable CD player. I get the same result
Hello Dinger1960,
Thank you for your message. Try the following steps to solve your problem.Open Windows Media Player > click on 'Tools' > select 'Options' > select "Devices".For the good CD/DVD drive, select "Properties".Make sure that you have selected digital in both boxesPlease let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Why csrss.exe freezes all other programs that are running when it is active?
I don't know what to say here. I have an ASUS Intel duo Core Windows Vista OS and when I read the e-mail or watching Facebook, play WoW or just generally surf on the internet and the active process other programs freeze and I have to restart the program.
I've read several channels that talk about the possibility of malware, and I have a current copy of Norton Antivirus and Malwarebytes, more I ran the quick scan of MRT and none of these show that I have a malware.
Any suggestions?
What do you mean by activation of csrss.exe? What program you restart?
Csrss.exe is responsible for the separation and process and thread creation. I think that all activity on his part would be a symptom rather than the cause of the problem you are experiencing.
This name has been used by malware to disguise himself. You can check if this copy is the real version of Microsoft looking where he was charged with the Task Manager. Go to view > select columns, look for the command line entry. It will show as C:\Windows\System32\csrss.exe if this is the true copy of Microsoft. Another thing would be malware.
You can try to use the clean boot to diagnose the cause of the problem:
-
Original title: start & close problem. Slow response
My PC is running Window XP SP2. I did all the updates.
Recently commissioning takes more than 15 minutes. Stop is worse. It hangs at the "closing Windows.Whatever programs that I run is extremely slow.I ran virus scan, microsoft fixed, but the problem persists.Well, I think you don't like it, but the first thing to do is to eliminate by using their special tools Norton Uninstall program:
Now, you might think I be without protection and get some bad things on my computer, but you just want to see how things are going without it. Just don't visit WWW stupid or silly sites, where you can pick up some virus or malware and you can always install a new copy, but I think it's a big headache for you now.
It might be out of date, too many options of protection installed, etc. More protection is not always better, and you will pay for it in the performance of the system with the more stuff you add.
Then when Norton is gone, proceed as follows:
No matter what you use for malware protection, follow these steps:
Download, install, update and do a full scan with these free malware detection programs at:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.Restart your computer and solve the outstanding issues.Consider instead of Microsoft Security Essentials or Norton - he did a good job.
We must eliminate what can cause problems, so I'd start with Norton. You can put it back later if you want, but you need to see how things are going without it. Moving things to a good operating system that you are happy with first.
Eliminate potential problems one at a time and test thing out... one thing at a time.
Symantec/Norton is you biggest problem right now.
Check your NVIDIA drivers:
I use the NVIDIA site and let scan them online take a look at your video system and see what he suggests for drivers and consider their analysis if they offer a new driver.
It is recommended to run the scan NVIDIA with Internet Explorer.
Here is the address of the NVIDIA page:
http://www.nvidia.com/download/Prescan.aspx?lang=en-usRead the instructions, and then click the DRIVERS GRAPHICS button to start scan and answered in the affirmative, if asked to install the plugin required to run the NVIDIA scan.
Get rid of Norton.
-
I get this message and can't find a way to stop it. A program that is running on this computer is trying to display a message
The alert program path: C:\Windows\system32\MsiExec.exe the Player version you want to install is less than what is installed.
Any Suggestions
Thank you
Peter
I also get it exactly the same problem. Started about 2 weeks ago. Trouubleshooting now... I'll post what I find.
Thank you. A question, how to deal with "" the version of the player you want to install is less than what is installed.? "" This will go away on its own?
Thank you
Peter
Peter-try completely remove Adobe Flash Player, and then reinstall. I did this on my machine and will need to see in the next few days if this has worked for me or not because I don't know how to manually recreate the guest. Best of luck and post back how it goes!
Here are the instructions for uninstalling Adobe:
https://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html
Reinstall: https://helpx.adobe.com/flash-player.html
-
How can I see the list of programs that are allowed through the firewall?
How can I see the list of programs that are allowed through the firewall? I can't find the list.
Open Windows Firewall and select 'allow a program or feature through Windows Firewall. You can then view or modify programs all allowed.
Jim
-
I see all the program that are instaled in ADDremove
in Add/REMOVE on my XP, I don't see any program that are instaled
Hello
Please follow the steps mentioned in the link provided below.
Incorrectly, Add/Remove Programs tool displays installed programs:
-
I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500.
Hi Mark,
Thank you for writing to Microsoft Communities. The description of your problem, I understand that you have problems setting up a homegroup with Windows 7 computer. Please correct me that I misunderstood.
Mark, please don't worry I'll try my best to resolve the issue.
I suggest to go through the following websites, which provide a detailed description on the homegroup and how to set up.
Home Sweet homegroup
http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way
Homegroup from start to finish
http://Windows.Microsoft.com/is-is/Windows7/help/HomeGroup-from-start-to-finish
If you're still having trouble to set up the residential group, please let us know. We will be happy to help you.
-
Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
step by step information!Hello
I suggest you to refer to the links and check if it helps:
Create a homegroup
http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup
Join a homegroup
http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup
Setting up a network home
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network
Remote Desktop connection
http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection
What types of connections remote desktop should I allow?
http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow
Remote Desktop connection: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions
Let us know if it helps.
-
Is there a version of the "otwin.exe on-time" program that will run on Windows 7?
Is there a version of the "otwin.exe on-time" program that will run on windows 7?
Original title: a program running on windows xp
It seems that this program was published in 1993 about, so unless the seller, Campbell Services Inc., has released a new version, the answer is probably not.
He also seems to be a 16-bit program, and as such, it will not work on a 64-bit version of win.
Maybe you are looking for
-
emails bounced by hotmail as not rfc 5322 complient
I have been using Thunderbird for a while with no problems. I have recently updated to version 38.1.0, after which the mails from Hotmail (or live.com , or msn.com , which seem to be the same server) are dismissed with: SMTP error from the remote ser
-
my iPhone has been fried due to water damage how much will it cost? If anyone knows could you please tell me thanks
-
FF has been updated to version 20.0.1 and now the themes do not work.
My browser is automatically updated to version 20.0.1. Since then any of my existing or brand-new, I download the work.
-
Where the Import Wizard in Firefox 8.0?
I always use Safari much. I would like to import my bookmarks from Safari to Firefox. I exported my Safari bookmarks on my desktop, but I can't find the Import Wizard in Firefox 8.0. It is not under file, and I can't make it appear by clicking on the
-
Behavior of locking/unlocking of VISA
I'm redrawing the current VISA drivers for several instruments that we use. Since it is possible that several different screws will want to access the same instrument more or less the same time, I want to block the instrument to ensure that certain