View the QVariantList given on the label?

Similar Questions

• How to set the text of the label from a point of view to another view?

  Hello

  I have two view view home and view header.

  House view contains the list of values.

  To the poster of the header, there is Label which is a title of this provision.

  When the user click on any value in home view I want to delegate control of the header display and to set the label text of selected line as heding on the display of the header.

  First if these two finds are two page qml distinct or unique. If they are saparete pages then you must use a data model to fill the list with data. Now on the selection of a row of list

  set the property in your House like this

  property variant selectedData
  

  now onTriggered signal write this code

  selectedData = dataModel.data(indexPath)
  

  and next page push, who do you think header, you can use this property value and fetch selectedData to display header

  as

  Label{
  
  text: selectedData.title
  }
  

  and if you have only the page containing the two views

  Follow the same steps

  and in this case, ontriggered signal set the label text

  Hope this can help you

• Art card - wrapping of text on the label (revolution)

  Need help! I am looking for anyone with knowledge of Illustrator CS5. I'm having a hard time with two things:

  Card art (text) on a 3d sample object

  I designed one can use the effect of ed and I need to apply to her, a logo and two words. The picture given in the form of sample has the image and the text on the label (filled with gradient). I have drawn the labelling elements, placed the gradient, etc.. Turning it into a symbol, but its does not work. If I as a rectangular label, the final image is not on the curve at all. I tried the text on a path, a red label bent, but overall, I was not able to reproduce. Can anyone help? Thanks for your suggestions!

  You have no curves outward. Thus, the label will have no curve.

  If you look at all right to a round can, the front looks flat, it will never be a curve. Try to increase the percentage of perspective in the 3D options or rotate the view to biased.

• How to view the zero in the dashboard reports when there is no data in the database?

  I'm generation of trend analysis report
  
  in which I not show. so each month on a site web, I have all the data for a given month July (because there is no success during the previous month), report is generated with all months except JULY.
  
  Is their any way to view the zero with the name of the month when there is no data (unsuccessfully) in the database?
  
  ex.
  Jan 10
  20 February
  15 March
  Apr 4
  May 12
  June 16
  July 0 <---(display zero here)
  August 11
  9 sep
  .
  .
  Dec 8

  You owe us an outerjoin:

  http://obiee101.blogspot.com/search/label/outer%20JOIN

  concerning

  John
  http://obiee101.blogspot.com

• Can't view the YouTube video because there is an active filter. It happens on the job and home networks and only on Firefox (15.0.1).

  After update 15.0.1 Firefox and Adobe Flash Player to 11.4, I was unable to view the media from YouTube. I was given a message: "this video is not available with the filter of education allowed.» To view this video, site network administrator will have to add to a playlist. I work for a school district and use my laptop at work so I thought that I got this message because YouTube is blocked on this network. But when I got home, I got the same message on my home network with YouTube videos. I have reset Firefox and he took care of the issue until I'm at work, and the problem happened again with the same message everywhere... I tried to post the same videos on another browser (Safari) and it works beautifully. I'm afraid that if I reset Firefox even once, I'm having the same problem.

  It is possible that YouTube set a cookie to filter which can still be seen when you connect at home. To clear cookies for youtube.com, you can use one of these:

  (1) 'dialog show Cookies' tab in Preferences/Privacy:

  Firefox > Preferences > privacy > 'view the Cookies '.

  Type yout in the search box at the top to filter the list and remove each cookie individually.

  (2) "view Cookies dialog box" in the Page Info/Security tab:

  While displaying a page on the site-

  Tools > Page Info > Security > 'view the Cookies '.

  -remove each cookie individually.

  Then, try to reload the page and see if Youtube behaves differently.

• View the maximum and minimum values on the waveform

  Hi, I have a table of waveform and want to display the values of maximum and minimum of the graph with the arrow. I tried to change with the property node, but I still haven't expected output. Could someone can help on this?

  Attached to the vi.

  I ran your VI and it seems to work, but it is difficult to report on its work for several reasons:

  1. the default annotation is black, which is difficult to see on black background graphic. Change the color of the annotation or change the color of the graph.

  2. scale there was not settled in auto-scaling, so I had to go to access my data, which makes it also difficult to locate annotations

  3 If you are using auto scale on the y-axis, the annotations will be always difficult to see because they will be outside the limits of the graphic scale car, I would recommend manually set the scales or by using the offset property label of the sliders to make the label in the view visible

  In addition, each time you add two new annotations to the curve, is this desired? If this is not the case, use a constant of cluster of annotation and a cable which, in your package names, then build a table with the poles of two annotation.

  Hope this helps,

  SoC

• Cluster containing the label the button Get?

  In view of the reference to a button in a cluster control, how can I get the label of the cluster containing (parent)?

  More information on the task at hand:

  I have a pair of buttons ('read' and 'write') within a cluster, what I repeated in rows and then wrapped in another cluster for convenience of layout. I now want to manage the events of each button, grouped by lines and columns, as in the photo (also attached VI):

  

  My goal is to have a case of "read" event and one case of event "write", and according to what rank button is pressed, the code will be the index of an array of data for reading and writing. I know I could write separate events for each, or change the labels for each button to "Read button 0", ' Read button 1 "," read "button 2", but this is just an illustrative example for a much larger grid of buttons and other controls, and it is prohibitively expensive to turn on each of the labels, modify them, and then hide each of the labels.»»

  If this is not possible, I am open to other ways to address this problem that don't involve not copy paste cases of event for each line (since it is also prohibitive for the frequency at which cases are changed).

  Thanks in advance,

  Arthur

  You can use the node property of the object button called "holder".  What it does is return a reference to the object owner of this button, in this case the cluster.  Then you can convert this reference to a more specific class of the cluster.  Then use a property node to read the label.text.

• Four cameras to inspect the label presence / Date / batch Code

  Hello

  We intend to use four color cameras (more probably Firewire) to inspect the right label presence (attached image), Date / batch Code (most likely a match and no OCR/OCV), liquid level and presence of Cap. The speed of the conveyor is 240 bottles per minute (ongoing). As the bottles are rotating, there is no fixed orientation of the label. Thus, we intend to capture 4 frames on each trigger, to assemble and to inspect for a suitable Date and batch number, correct label, liquid level and correct the blockage. Good level of liquid is always above the label, so it shouldn't be a problem.

  We need a software / hardware recommendations for the cost of work effectively. For example, can VBAI as well as NI EVS-1464RT work for this application, or do we need to Labview and the Vision Development Module? We have the best price / performance for this application.

  Any comments / suggestion should be highly appreciated.

  Dear Faisal,

  VBAI does not include the steps to assemble the images, I suggest you LabVIEW and the Vision Development Module development.  If you want to use the EVS-1464RT, you will also need a copy of LabVIEW RT.  Note: the Vision Development Module can be purchase as a bundle with LabVIEW RT, see http://sine.ni.com/nips/cds/view/p/lang/en/nid/207699.

  Another way to achieve your goal of a 360 degree view of the bottle would be to use a lens Opto pericentrique Engineering, see http://www.opto-engineering.com/pericentric-lenses.html.  This would allow you to use a camera.

• View the data in process management in file based on a Smart View formula

  Hello

  Is it possible to view the status of the process management of an entity (document, approved, etc.) in a formula-based Smart View file?

  I know that I can change it in Smart Display Options, but as far as I know it is only for Ad - Hoc.

  Please notify.

  Thank you

  The available functions are only:

  HSSetText, HSGetText, HSCurrency, HSDescription and HS Label; to return the State you need a function that provides information based on the settings of the formulas and is currently not available, so you will need to write an ad-hoc report or VBA to fill in the runtime of a button.

• HOW TO CHANGE THE SIZE OF THE LABEL IN ADOBE READER

  I have the latest Adobe Reader and try to change the size of the label to print on a ZEBRA ZP 450 it says I don't have permissions. Thank you

  Hi microc86343322,

  Could you please let me know what kind of label is there in the PDF file.

  In addition, share the screen shot of the error message that is displayed before the exact cause can be analyzed.

  You are logged as administrator?

  Please note that the player in the only used view, comment on and sign a PDF file and not for editing. To modify a PDF file, you will need Adobe Acrobat.

  Kind regards

  Ana Maria

• How can I create a label twist wrapped around a cylindrical container of a square image, like the label of the container of pringles chips paper?

  Hello

  I'll make a new packaging for a product that my company will launch next month. The packaging is cylindrical and paper twisted and wrapped around a cylinder.

  I finished the label in Adobe Illustrator, and it's a square image. Now, I want to design the label in the form of torsion that hurts the cylindrical container like the label of the container of pringles chips paper.

  Please give me some advice or instructions that may help me to design the label my desired form. Thank you...

  Kaddour,

  You may be, based on the version cut showing a cup which begins and ends at the level of the corners (guides are your friends):

  Round 1) create the complete label goes all the way, in the form of basic rectangular/square (works both a rectangle and a square, this last just have the same width and height), with all the works of art;

  (2) to decide the number of cuts;

  (3) create an oblique path right from the upper left corner (you can use the line Segment tool) for somewhere farther to the right, and then with the reference Point in the range of transformation the left superior value changes the value of W to the total width of the rectangle divided by the number of cuts, this will give you the right angle;

  (Pass 4) a copy of the straight path of 2) to the right by its value of W;

  5. Select two straight paths of 3) and 4) and Ctrl / Cmd + J to join them so create a parallellogram with twice the value of 3 W) / 4);

  (6 moving copies of the parallellogram left and right by the W of the value of 3) / 4), repeat until you have covered the original rectangle.

  (7) let the parallellogram on the far left where it is (covering the left upper part of the original rectangle) and move the others down by the height (of the original rectangle / the parallellograms), leave one where it is and continue with the remaining until they are all under one of the other;

  (8) copies of the original rectangle of 1 move) downwards by its height until you have rectangles behind the parallellograms.

  (9) for each set of parallellogram and rectangle, select both and object > clipping mask > make.

  (10) select and group;

  Now you should have the final shape and look of the rectangle cut as a group of clipping masks, done digitally; You can use as it is to cut a single label, or you can:

  (((11) copies of shifting to the right by the W of the value of 3) / 4) to have multiple labels to cut.

  This obviously requires a fairly precise cut, but it may be less critical than usual, given the nature of the twisted label.

• How can we change the labels of fields in the query of the adf please?

  Hello, I would like to change the labels field in a query of the adf, as they were created by default by oracle.

  The only found code is:

  <af:query id="qryId1" rows="6" headerText="Search" disclosed="true" maxColumns="2"
                              value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
                              model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
                              queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
                              queryOperationListener="#{bindings.ImplicitViewCriteriaQuery.processQueryOperation}">
                      <af:inputText value="#{bindings.PrtDesc.inputValue}" label="Desc"
                                    required="#{bindings.PrtDesc.hints.mandatory}"
                                    columns="#{bindings.PrtDesc.hints.displayWidth}"
                                    maximumLength="#{bindings.PrtDesc.hints.precision}"
                                    shortDesc="#{bindings.PrtDesc.hints.tooltip}" id="it3">
                        <f:validator binding="#{bindings.PrtDesc.validator}"/>
                      </af:inputText>
                    </af:query>
  

  Hello

  If you use ADF BC, set flags of the UI on the attributes of the View object for attributes and these will make labels

  Frank

• The label is not encoded when the rendering engine encodes the commit message.

  I encountered a problem with a field with a label that contains a character special (u). I have a validator for the uniqueness on this field and when validation fails... instead, to display the error message that I wanted to the js method window.onbeforeload is called and the message "are you sure you want to exit this page?" appears.

  I looked into the problem and I was surprised to find that the ADF encodes the validation by using the ClientEncoder message... and if I use the character "u" it will turn into unicode as '\xfc', but it adds on the AdfFacesMessage the Label, which also contains a special character 'u' which is not encoded. This seems very odd.

  To be more precise:

  When validation fails, I created a FacesMessage, this message will be wrapped by the ADF in a LabeledFacesMessage as you can see: new FacesMesssageWrapper (facesMessage, _getLabel());

  The _getLabel() method evaluates the expression "#{bindings." ActivityCode.hints.label}"in order to obtain the label of the field. At this point I don't see how I can send an HTML escaped String because this label is displayed on the user interface and it contains the character special 'u'.

  When the response is created... in the class oracle.adfinternal.view.faces.renderkit.rich.RichMessageRenderUtils in _encodeMessageCall message for the message error an encoder should I display on the user interface is used to escape characters that are special, but for the label, it is not used... as you can see in this code:

  ClientEncoder encoder = RichRenderer.getRichRenderingContext (arc) .getClientEncoder ();

  encoder.appendCharSequence (messageSummary, message.getSummary ());

  encoder.appendCharSequence (messageDetail, message.getDetail ());

  RW. Append (", new AdfFacesMessage(AdfFacesMessage.TYPE_") ")

  . Append (type)

  . Append(",")

  . Append (messageSummary)

  . Append(",")

  . Append (messageDetail)

  . Append ("") ");"

  If (title! = null)

  {

  RW. Append(",\"")

  . Append (title)

  . Append("\"");

  }

  RW. Append ("");") ;

  
  

  For me, it looks like a bug in the ADF. Please notify.

  
  

  Thank you

  Vlad.

  Vlad, which Jdev version do you use?

  If you have a support contract, you must open a SR with support. You analyzed the captain already, only Oracle must accept this as a bug (that don't support that can do) and you can request a fix of our workaround.

  Timo

• Change the 'label' on an active vSphere license?

  All,

  I have a lot of "combined" vSphere licenses groups in vCenter 4.1, I would change the descriptive label on some of the or the vSphere currently loaded in vCenter licenses.

  Cannot do through the UI, I have looked on the tables of database VPX_LIC_ * but don't see anything with the information on the label.  I could go through the center of the license and get the keys to the 'News', but I have to go through several cycles to combine/split to obtain the appropriate keys, too much work.

  Anyone know where this information is stored?  I expect it to be in the same table as VPX_LIC_LICENSES (which is where the license keys are) but no dice.

  Ben

  The label can be changed by going to the page of vSphere vSphere Client licenses, view by product, then developing the object to see its keys.

  Since the key line, click on the label and press F2 to edit the entry (or you can double click on it).

  I've edited all my labels to better describe what they manage (such as Group A, Group B, etc.).

  I was able to do this since vCenter 4.0, tested on 4.1 and it still works fine.

• How to make a statement online to view the content rather than the blank PDF form?

  I use my Mac 10.9.3 with Adobe Reader XI in my browser Safari 7.0.4.  I don't have problems to view the PDF instructions with my bank or other locations OTHER than Ford Credit.  Whenever I connect to Ford credit discovers statements and attempt to download, all I get on screen is their blank form with headers and titles - no content.  When this has happened once before over a year ago with my old Mac computer, I found my answer online through Adobe Reader my default player instead of the preview.  At this time, it worked.  This time, his does not work.  I contacted Ford credit and they said that their online account manager performs best using Internet Explorer.  The only answer they had for me was this notice or to contact Adobe.  So here, I'm looking for answers.  Any help provided is already popular.

  Well, I think I found it finally and "fixed" my problem in this "round about sort of way.  This same fixed icons of the Virgin white sheet on my desk, which also now show 100% of content statement thus:

  Using Firefox, I log in Ford credit.

  I click on the link to see the statements.

  I click on the link that says "print statement.  The declaration appears in a new window of the tab and even if it is empty without content, I proceed to the next step.

  I click on the small "arrow download" next to the "printer" icon and that States opens a pop-up box of "you have chosen to open: 0.pdf.»  What should Firefox do with this file? »

  Undo the default button that says 'save file' and click on the button above him who gives the choice of 'Open with Adobe Reader (default)' and then check the box that says "Do this automatically for files like this in the future".

  Click 'OK' and the document opens in a new window with the form document and 100% of its display of the content information.  ;-)

  Using the toolbar under 'File' Adobe Reader, scroll down and click on "Save as."  The usual pop-up window appears to "save a copy...". "and I continue from there to save my statement under a document name different than what Credit Ford offers.  I have usually to save my words using the date of the statement and place it in a folder in my documents labeled Ford Credit.

  Fact!

  Fixed!

  Achievable!

  Happy!

  And now, on to the rest of my life...

• Showing the indication in the label

  Hi friends,
  
  I have a page element. I need to show the flag with this element of the page when I moved my mouse to the label for this element of the page.
  
  I tried by changing the label of the element of 'Optional with the help' page and also gave help comments. But I can view this suspicion that after clicking on the label of the page element.
  
  If it is possible to display the indication of this element of the page, shortly after I moved the mouse of the label of the element of page instead of clicking.
  
  Brgds,
  Mini

  Change the page element
  Go to label - attributes of HTML table cells
  Enter: title = "" this is the text to display when mouseover the label ""