Violation of State protection session error - after upgrade to point 4.1.1

Similar Questions

• Violation of State protection session during the creation of master page / retail

  I am trying to create a new master page / detail in Apex 5.0, and at the end of the dialog box, I get this error message:

  Session state protection violation: this can be caused by manually editing the protected page P24_MASTER_PAGE_MODE point. If you don't know what caused this error, contact the administrator of the application for assistance.

  [I am the administrator of the application, and I have not the slightest idea either.]

  The error occurs when I click Next in the dialog Page attributes. The error also occurs in other applications in the same workspace. So I don't think it's important, but I replace the default detail Page number. (The default number of Master Page is grayed out.) In addition, the dialog box layout I had selected... in a table on the same page. I've also specified no master navigation and no reports of master.

  Following archived discussion of v4.1.1, Session State protection violation, I modified a diagnostic query and run the following in my diagram:

  
  

  Select item_id, nom_element page_id, region of apex_application_page_items where nom_element = ' P24_MASTER_PAGE_MODE'

  
  

  I'm not abreast of any application in my workspace with a Page 24 and sure enough, this query returns no data found. Please take note of this before suggesting to change the attributes of the element. I don't know where the item is and not only the database, apparently. Apex seems to think there is - but where?

  
  

  Since an earlier discussion which went nowhere, I crushed my most recent request for export file, but that has not solved the problem. I also went into my workspace apex.oracle and created a form master / detail without error.

  
  

  Thanks for your help!
  

  Obfuscation Express.

  Worsening Express.

  Apex, the product you hate to love.

  It turns out that the dialog box create a Master Page / detail has a Mode option of the Page on modal Page attributes page. I'd be willing to bet, this option is not P24_MASTER_PAGE_MODE. (There is also one for the details of page: P24_DETAIL_PAGE_MODE?) But it has the Normal and gray value.

  It is also now a Select list after my dose; I think it was a type item view only before the fix, which only confirms my thought. I was wondering, which could affect, or enable or disable the modification of the attributes of session state for that element. Model and its theme came to mind, and I remember that I had tried to understand something on a model in the last days, had made a change and tried to cancel it.

  To no avail, apparently.

  Thus, a little more explore new territory, trying to find the modified model and could not. But I read that templates are collected into themes, and I found that I could renumber 26 theme in the application (926). Then make a theme create, from the repository, changing from standard to all themes, click theme 26. Then it was switching themes and rematching models and remove the renumbered theme 926.

  Voila! I can now create a master page / detail without report master!

  Thanks for all the help, with particular satisfaction for Pranav.shah, who was on the train right but don't know which track to take.

• "Insufficient for an image" error after upgrade to 10.1.4 or 9.5.2

  Greetings,

  We continue to receive the following error message: "Insufficient for an image" error after upgrade to 10.1.4 or 9.5.2 and we want a quickfix (as it appears in: fter-updating-to-10-1-4-or-9-5-2/ https://blogs.adobe.com/dmcmahon/2012/08/21/acrobat-insufficient-data-for-an-image-error-a). Our company uses scanning software, and we must be able to immediately view the PDF files, retirement is not an option that we would need to do it on all computers. It is urgent for us to have this fixed number, a quickfix (as shown previously) would be ideal, because we cannot wait for the next update to Acrobat. This question as been around for several weeks now.

  Thank you very much for your time and help.

  Acrobat engineering wishes to inform users facing this problem that the latest version of the player (available for download on http://get.adobe.com/reader) XI solves this problem. Users are advised to download the latest version as soon as possible to avoid encountering this error in the future. As mentioned, the team is working hard to solve the problem in earlier versions (10.x and 9.x) as well and plans to deliver a solution by Q1 2013. For more details, you can check out the blog here

• Tab (and Windows) restore + restore previous Session deactivated after upgrading to Firefox 29

  After the upgrade to Firefox 29 all restore option is disabled
  I did this step before post question
  1. check setting history if it is not explicit story after closing
  2 check about: config to change possible
  3. search internet and here for a similar problem with this update, FIREFOX 29

  but I could not find something
  Firefox Restore tab or windows after close or even previous session
  Even after crash firefox did not restore tab or I could select from the menu

  Please consider creating a backup of all files affected just by applying the following steps.

  In '% appdata%\Mozilla\Firefox\Profiles\' is a file called < something > .default (this is the your firefox profile folder)

  1. close Firefox

  2. in this folder, delete the following files:

  • sessionCheckpoints.json
  • sessionstore.js + variations such as sessionstore - 1.js, sessionstore.bak, etc.

  3. restart Firefox

  Session restore should now work even though your last session will be always lost. In case you still have questions, try to disable the session restore feature before you apply above steps and he subsequently reactivation.

• Error after upgrade to iOS 9, code of return and Xcode 7: 65

  Hello

  I could deploy applications on iPhone before updating to 7 Xcode and iOS9 (automatically).

  I use Jdeveloper 12.1.3.

  Now, I get the error:

  [19: 02:19] run command line: xcodebuild-window Oracle_ADFmc_Container_Template archive archivePath - /Users/user/jdeveloper/mywork/ProductList/deploy/iOS2iTunes2iPhone/Destination_Root/ProductList.xcarchive - sdk iphoneos IPHONEOS_DEPLOYMENT_TARGET = 7.0 TARGETED_DEVICE_FAMILY = 1 ADD_SETTINGS_BUNDLE = No. PRODUCT_NAME = ProductList CODE_SIGN_IDENTITY = iPhone Developer: name V (12345XYZ)

  [19: 02:41] orders for next generation failed:

  [19: 02:41] command-line execution failed (return code: 65)

  [19: 02:41] undeployment.

  [19: 02:41] - incomplete deployment.

  [19: 02:41] could not build the iOS application pack.

  [19: 02:41] deployment failed due to one or more errors returned by 'xcodebuild.  What follows is a summary of the returned error:

  Command-line execution failed (return code: 65)

  Orders for next generation failed:

  Ld /Users/user/Library/Developer/Xcode/DerivedData/Oracle_ADFmc_Container_Template-gwxjznarmoyczadsnbxmvfmebqni/ArchiveIntermediates/Oracle_ADFmc_Container_Template/IntermediateBuildFilesPath/Oracle_ADFmc_Container_Template.build/Release-iphoneos/Oracle_ADFmc_Container_Template.build/Objects-normal/armv7/ProductList normal armv7

  (1 failure)

  And in fact the ProductList file is missing in this way!

  What could be the reason?

  Someone at - it experience with deploying applications after upgrading to Xcode 7?

  Thanks for your help!

  Klemens

  Hello.

  XCode 7 don't is not supported with MAF for now. Our goal is to support in our next major release.

  Just rename your current installation of XCode to something else (XCode 7 would be nice), then download and install XCode Developer Center 6 Apple. You MAF should run without any problem on iOS 9 anyway.

  Best regards

  Frédéric Desbiens

  Senior Product Manager

  Mobility and Cloud oracle

  Twitter: @BlueberryCoder

  blog: http://blogs.oracle.com/blueberry

• Why a sql statement has become slow after upgrade to 11g database

  Hello
  
  My previous version of the database is 9I and any sql statement are well-developed.
  but after upgrading to 11g database, a sql statement become slowly.
  
  My senior dba friend told me there are a few different calculating methods from 9i to 11g.
  is any body can explain this different methods from 9i to 11g, and what should be attention to calculate at what level 9i to 11g. I thank.
  
  Sean

  The administrator of yours is correct. What he meant, 9i, the works of the optimizer with different formulas and 11 g, there are different formulas. PS this sometimes causes when you upgrade from 9i (or even 10g too), analyze the queries that worked with RBO in 9i perfectly and used indexes, all of a sudden they stop using it because the CBO think not that this is a good choice. It would be too difficult to put formulas here by anyone, but what I can say is that to buy a book.
  http://www.Amazon.com/cost-based-Oracle-fundamentals-experts-voice/DP/1590596366

  And practice on 9i, 10g and 11g. It would say a lot of formulas used by oracle.

  HTH
  Aman...

• error after upgrade to 8.02 SQL statement

  Here is my sql statement that worked fine until I upgraded to dreamweaver. Now it says I have a syntax error. Can someone tell me what is wrong with him?
  
  SELECT *.
  EVIDENCE
  WHERE proof_associate = MMColParam AND (proof_formNumber % OR proof_date % OR proof_desc % OR proof_AKA % OR proof_keywords % GOLD proof_tab GOLD proof_client AS % sorting % LIKE LIKE LIKE LIKE LIKE LIKE)
  ORDER BY proof_date DESC
  
  mmcolparam and sorting are session variables
  
  Thank you
  Chris

  If I remember correctly, the model of ASP Server (and perhaps others like)
  well) will only create a copy of your setting. The problem is that they used
  Setting TEEN with placeholders, which is based on the position. That
  means that you will have to go and attach a copy of "spell" to the command object
  for each instance of "sort" in your query. This is most easily done using
  mode Code and not spend time trying to do this in the user interface.

  "imjusthere2" wrote in message
  News:f61agg$ok1$1@forums. Macromedia.com...
  > Here is my sql statement that worked fine until I upgraded to dreamweaver.
  > Now
  > it says I have a syntax error. Can someone tell me what is wrong with him?
  >
  > SELECT *.
  > EVIDENCE
  > WHERE proof_associate = MMColParam AND (proof_formNumber LIKE % OR)
  > proof_date % OR proof_desc % OR proof_AKA % LIKE LIKE LIKE
  > OR
  > proof_keywords % GOLD proof_tab GOLD proof_client AS % LIKE LIKE
  (> sort %)
  > ORDER BY proof_date DESC
  >
  > mmcolparam and sorting are session variables
  >
  > Thank you,
  > Chris
  >

• Error after upgrade to ESXi 5 Update 1 on free version

  At all a ghettoVCBg2 got another run properly after the upgrade to ESXi 5u1 via vMA 5 when it's the free version?

  I have a couple of free machine and they are the only ones having problems. My verson licensed production work very well.

  The error I get on free machines is as follows:

  Failed to get vim_service - the session object is not initialized or not connected to the line /usr/lib/perl5/5.10.0/VMware/VICommon.pm 1654
  Perl came out with active threads:
  1 running and spare
  0 finished and spare
  0 running and detached

  I find autour and trying different solutions to simular errors (for example, by adding the debugging of CARP), but nothing works.

  None of the 1 post update fixes fixed either.

  ghettoVCB works very well on the free servers however.

  So, I'm curious if anyone has seen this problem?

  I guess that the reason is that ghettoVCB2 was built for the paid editions that allow write API access.

  There was some editions which do not restrict this access, as you can see in "Support of ESX/ESXi Version table" at http://communities.vmware.com/docs/DOC-9843. The initial version of ESXi 5.0 is / was one of them, considering that the update 1 is even more restrictive.

  André

• SmartView keeps poping "Decompression failed" error after upgrade

  Hello
  
  2 weeks ago, we have improved our Windows Server running essbase from 2003 to 2008 R2. After that users upgrade continue to receive the "Decompression failed" error when working with Essbase. That they are currently using client versions 11.1.2.0 and 11.1.2.1.
  
  We tried to capture registry settings for the connection timeout side customer 180000 and later 900000 ms without success (http://essbaselabs.blogspot.com/2010/02/smart-view-timeout-settings.html). The "Decompression failed" error always comes after the session timeout.
  
  It seems that the "Decompression failed" error has replaced the previously thrown error "connection timed out".
  
  Someone at - it ideas?
  
  Thanks for all the ideas...

  Have you tried the following:

  update after the entry as true in the essbase.properties file:
  SmartView.WebService.gzip.compression.Disable = true

  It was the setting in earlier versions 11.1.2 should not interfere with any of your existing worksheets
  try it

• Firefox shortcut icon error after upgrading to 7.0

  I have upgrade my Firefox 7.0, but the shortcut icon is changed not like it used to be, but it resembled an icon of the installer. When I clicked it, it opens Firefox browser very well without any errors. Why is it happening and how to fix?

  Thanks a lot before.

  Try resetting the Windows icon cache.

  • Open the task (Ctrl + Shift + ESC) Manager
  • In the processes tab, right-click on the Explorer.exe process and select end process.
  • Open the file picker via ' file > new task (run) "and click on the Browse button.
  • Type or paste %USERPROFILE%\AppData\Local in the file name field (AppData is a hidden folder).
  • Select the file IconCache.db and use Delete on the shortcut menu to delete the file.
  • After that the IconCache.db has been deleted, start a new explorer.exe process through "file > new task" for the job and work the taskbar to return.
  • It is possible that the IconCache.db file is a hidden file, and in this case you must enable the display of hidden files. You can verify that you can see the file before doing above mentioned as follows.

  See http://kb.mozillazine.org/Show_hidden_files_and_folders

• Preferably system errors after upgrading to El Capitan

  After the upgrade to El Capitan, I can't connect to all the apps to icloud.  Had errors when you first install my computer after the upgrade to the new operating system, so I opted out of it then.  I went into System Preferences, and there is no freeze that system preferences.  This also happens when I click on 'Security and privacy' and 'Parental control' (these are the only elements when I tested all components).  I tried safe restart and that did not work.  I have also tried in a guest account and have no problem in the guest account.  This account is extremely slow and freezes more than the guest account.  This is the part that I'm stuck in (I tried to go through other threads, but have no luck with their recommendations).  Here is a copy of the console messages that I get when I click on the iCloude pane in system preferences:

  04/12/15 9:31:35.448 PM SpotlightNetHelper [703]: tcp_connection_destination_handle_tls_close_notify 20 decision of closure due to the TLS CLOSE_NOTIFY alert

  04/12/15 9:31:35.449 PM SpotlightNetHelper [703]: Error 20 32 tcp_connection_tls_session_error_callback __tcp_connection_tls_session_callback_write_block_invoke.434

  04/12/15 9:31:35.452 PM SpotlightNetHelper [703]: tcp_connection_destination_handle_tls_close_notify taken 26 closing due to the TLS CLOSE_NOTIFY alert

  04/12/15 9:31:35.452 PM SpotlightNetHelper [703]: 26 32 tcp_connection_tls_session_error_callback __tcp_connection_tls_session_callback_write_block_invoke.434 error

  04/12/15 com.apple.preferences.icloud.remoteservice [821 9:31:36.162 PM]: unable to connect (_signInButton) out of (iCloudPref) (NSButton): missing setter or instance variable

  04/12/15 com.apple.preferences.icloud.remoteservice [821 9:31:36.163 PM]: unable to connect (_signInSpinner) out of (iCloudPref) (NSProgressIndicator): missing setter or instance variable

  04/12/15 com.apple.preferences.icloud.remoteservice [821 9:31:36.163 PM]: couldn't connect action, class iCloudPref target does not respond to the - signinPressed:

  04/12/15 com.apple.preferences.icloud.remoteservice [821 9:31:36.193 PM]: additional logging, array returned in signedInAccounts is)

  )

  04/12/15 9:31:36.381 PM syncdefaultsd [252]: accountsd has been removed from the sync of apps.

  "04/12/15 9:31:36.393 PM accountsd [823]: * reason for termination due to an untrapped exception"NSInvalidArgumentException"app,: ' *-[__NSSetM addObject:]: object cannot be null"

  First throw call stack:

  (

  0 CoreFoundation 0x00000001081f9e32 __exceptionPreprocess + 178

  1 libobjc. A.dylib 0x0000000107ca2dd4 objc_exception_throw + 48

  2 CoreFoundation 0 x 0000000108134610-[__NSGlobalBlock hold] + 0

  3 AccountsDaemon 0x00000001071fbb4b-[ACDDatabaseInitializer _ensureAccountTypeWithIdentifier:supportsDataclasses:syncsDataclasses:] + 354

  4 AccountsDaemon 0x00000001072008db-[ACDDatabaseInitializer _addDocumentsAndVPNDataclass] + 394

  5 AccountsDaemon 0x00000001071f7a86 __46-[ACDDatabaseInitializer updateDefaultContent] _block_invoke + 2421

  6 CoreData 0x00000001073169e4 developerSubmittedBlockToNSManagedObjectContextPerform + 196

  7 libdispatch.dylib 0x00000001093e13c3 _dispatch_client_callout + 8

  8 libdispatch.dylib 0x00000001093e29aa _dispatch_barrier_sync_f_invoke + 74

  9 CoreData 0x00000001073168cc-[NSManagedObjectContext performBlockAndWait:] + 236

  10 AccountsDaemon 0x00000001071f70f4-[ACDDatabaseInitializer updateDefaultContent] + 132

  11 AccountsDaemon 0x000000010722a178-[ACDDatabase _setupManagedObjectContext] + 313

  12 AccountsDaemon 0x000000010722891f-[ACDDatabase initWithPath:] + 129

  13 AccountsDaemon 0 x 0000000107228884-[ACDDatabase initWithDefaultPath] + 64

  14 AccountsDaemon 0x00000001072251bf-[ACDClient initWithConnection:database:] + 183

  15 AccountsDaemon 0x0000000107222ea4-[ACDServer createClientForConnection:] + 69

  16 AccountsDaemon 0x00000001072218b7-[ACDServer listener: shouldAcceptNewConnection:] + 78

  17 service_connection_handler_make_connection Foundation 0x000000010773674e + 178

  18 libxpc.dylib 0x00000001097e7986 _xpc_connection_call_event_handler + 35

  19 libxpc.dylib 0x00000001097e6045 _xpc_connection_mach_event + 1756

  20 libdispatch.dylib 0x00000001093e954e _dispatch_client_callout4 + 9

  21 libdispatch.dylib 0x00000001093e99c0 _dispatch_mach_msg_invoke + 555

  22 libdispatch.dylib 0x00000001093e61b8 _dispatch_queue_drain + 1207

  23 libdispatch.dylib 0x00000001093e8317 _dispatch_mach_invoke + 735

  24 libdispatch.dylib 0x00000001093e61b8 _dispatch_queue_drain + 1207

  25 libdispatch.dylib 0x00000001093ec6bf _dispatch_queue_invoke + 549

  26 libdispatch.dylib 0x00000001093e4d0b _dispatch_root_queue_drain + 538

  27 0x00000001093e4ab8 _dispatch_worker_thread3 + 91 libdispatch.dylib

  28 libsystem_pthread.dylib 0x00000001097724f2 _pthread_wqthread + 1129

  29 libsystem_pthread.dylib 0 x 0000000109770375 start_wqthread + 13

  )

  04/12/15 com.apple.xpc.launchd [1 9:31:36.394 PM]: (com.apple.accountsd [823]) Service was released due to the signal: Abort trap: 6

  04/12/15 9:31:36.394 PM diagnosticd [134]: error assessment process info - pid: 823, puniqueid: 823

  04/12/15 com.apple.AddressBook.ContactsAccountsService [284 9:31:36.394 PM]: [accounts], we have failed to get an account for com.apple.account.CardDAV: Domain = com.apple.accounts error Code = 10002 "(null)".

  04/12/15 9:31:36.395 PM sharingd [645]: [AOSAccounts]: [__52-[ACAccountStore (iCloudAccount) icaAppleAccountType] _block_invoke]: accountTypeWithIdentifier returned the error: Domain = com.apple.accounts error Code = 10002 "(null)".

  04/12/15 9:31:36.396 PM sharingd [645]: [AOSAccounts]: [-[ACAccountStore (iCloudAccount) icaAppleAccounts]]: icaAppleAccountType returned no account type

  04/12/15 9:31:36.396 PM sharingd [645]: 21:31:36.395: no parameter of delegate account, account exists = NO

  04/12/15 com.apple.xpc.launchd [1 9:31:36.395 PM]: (com.apple.accountsd) Service worked only for 0 seconds. Push the respawn in 10 seconds.

  04/12/15 9:31:36.397 PM sharingd [645]: 21:31:36.396: Tethering: identifier needs fixing

  04/12/15 9:31:36.617 PM ReportCrash [774]: report of incidents recorded for accountsd [823] version 113 (113) to/Users/username/Library/Logs/DiagnosticReports/accountsd_2015-12-04-213136_comp utername.crash

  04/12/15 9:31:36.625 PM ReportCrash [774]: Remove excessive log: file:///Users/username/Library/Logs/DiagnosticReports/accountsd_2015-12-04-2128 12_Computername.crash

  04/12/15 9:31:36.626 PM ReportCrash [774]: impossible to write history of crash in file:///Users/username/Library/Application%20Support/CrashReporter/accountsd_E0 A 26, 892 - 0DE7 - 5E4C - A1FD - 846D9042A9FB.plist.

  04/12/15 com.apple.xpc.launchd [1 9:31:37.851 PM]: (net.openvpn.client [824]) Service came out with abnormal code: 1

  04/12/15 com.apple.xpc.launchd [1 9:31:37.851 PM]: (net.openvpn.client) Service worked only for 0 seconds. Push the respawn in 10 seconds.

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Accounts/Accounts3.sqlite

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. Log off or restart the computer, and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• small business of HP dc 7700: 1801 bios error after upgrading processor

  I upgraded the processor of pentium dual core E5200 @ 2500 Hz. After all biosupdates, I still get the error from the bios 1801 on the revision of the processor. The processor is now set to 2500 Hz, before the updates, it was 1800 Hz as the old processor was. But I can't get the error removed. Suggestions?

  added: the system is slow now.

  Hello:

  I could run the last update of firmware and see if that fixes the problem.

  Microcode update is a complicated business, but I simplified it for you...

  Tools you will need... usb flash drive of at least 1 MB in size.

  I have attached all the files you need below.  You will need to unzip them into their records.

  1. make the bootable flash drive.  Insert the flash drive into your PC and run sp27608.

  2 once the tool formats the flash drive and make it bootable, copy the contents of the folder BACK to the flash drive system.  All the contents of the file, not the file.

  3 copy the contents of the file in the folder BACK flash in the usb flash drive.  Once again, just the contents of the file, not the file.

  4 restart the computer, press the F9 key and select the USB in the list of bootable devices.

  5. the PC should boot from the USB and will take you to a command prompt.

  6. at the command prompt, type Flashbin.exe and press the Enter key.

  7 follow the instructions on the screen to update the firmware.

• Windows Media Player C00D11BA error after upgrade (?) to Windows 8.1 8.0 on the urge

  I have one:

  HP ENVY 15 notebook PC, nuber of product: C8P47AV

  8.1 pro 64-bit of Windows

  Intel Core i7-4702MQ CPU @ 2.20 GHz

  NVIDIA GeForce GT 740M

  #1 AudioDevice: Intel(r) Audio display

  #2 AudioDevice: IDT High Definition Audio CODEC

  After I've upgraded to Windows 8.1 and was playback of an MP3 file, I got this Windows error mseesage, "Windows Media Player C00D11BA error" and no sound. Many required devices as their drivers updated and completed.

  Please advise,

  Mike

  Hi Mike,.

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  Once complete, download and reinstall the Chipset driver from the link below.

  Chipset Driver - Windows 8.1

  When you're done, shut down the laptop by holding down the SHIFT key when you click Shutdown to temporrily prevent a hybrid boot.

  Only start the laptop and let Windows load completely - it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - restart the computer and try to play the mp3 file.

  Kind regards

  DP - K

• 1801 - Microcode Patch error after upgrading D310v EVO 1.7 GHz Celeron processor Celeron 2.8 GHz

  I replaced my processor, as described and on startup, I get the "1801 - Microcode Patch error...". "mssg telling me to 'contact' Compaq for a new ROM BIOS to take in charge the new stepping. I have to push 'F1' at startup, then it starts and runs significantly faster than before the upgrade. I found the BIOS upgrades to the HP site but I cannot know which is correct. I've tried a couple and nothing happened after downloading; How will I know which is the right one, how to throw, etc? Can damage my computer if I run that badly?

  Hello:

  I'm sure that a Pentium 4 processor 2.8/533/512 will work fine with your current configuration to 95%.

  Certainly better than celery.  I even think that the P4 2.4/533/512 would be better than celery 2.8.

  But go for the P4 2.8. They should be cheap and abundant.

  Just check you get one with the FSB 533 and 512 KB of L2, FSB 800 or 1 MB L2 cache cache, or it won't work.

  It's one you need - and the cheapest I could find - buy - it now.

  http://www.eBay.com/ITM/SL6PF-2-80-GHz-Intel-Pentium-4-processor-CPU-478-pin-/330678567620?PT=CPUs&hash=item4cfdfa82c4

  Paul

• HP 15 DO54 SQ, 3F0 ERROR AFTER UPGRADING BIOS

  
  

  Hello

  All the tests of hard drive was ok, PASS. Now how to fix error 3F0

  My old sytem was Windows 7 until I did the upgrade of bios, so after this error, I install Win 8, then I did upgrade the bios to version under Win 8 F18.

  I turn on my laptop and I went into the bios and I find support legacy startup option (on the version of the bios F08 this option does not exist), I enable legacy support and everything was ok, I reinstall Windows 7 on my laptop.

  Thank you