Virtual gateway Wirelles In-Band NAC Appliance

Hi, people.

Knows someone like NAC Wirelles in-band Gateway Virtual Appliance configuration.

TKS.

Hello

Well, it's a pretty simple question and I can say that many people know how to configure NAC to WIreless NVI VG.

Can you be more clear on exactly what you need?

ARO

Tiago

Tags: Cisco Security

Similar Questions

  • Verification of the Configuration of the NAC/CCA: OOB + virtual gateway (L2)

    Hello

    I'm currently setting up a deployment of NAC from out-of-Bound OOB with virtual gateway. Can someone please check my configs below:

    Central office switch:

    ------------------------------------

    DB OF VLAN:

    ----------------

    !

    VLAN 10

    name VLAN_DEPT1

    !

    VLAN 11

    name VLAN_DEPT2

    !

    VLAN 20

    name VLAN_DEPT3

    !

    VLAN 26

    name VLAN_DEPT4

    !

    VLAN 27

    name VLAN_DEPT5

    !

    VLAN 28

    name VLAN_DEPT6

    !

    VLAN 29

    name VLAN_DEPT7

    !

    VLAN 30

    name VLAN_DEPT8

    !

    VLAN 32

    name VLAN_DEPT9

    !

    VLAN 50

    name VLAN_NetMGT

    !

    VLAN 51

    name VLAN_CAS_MGT

    !

    VLAN 52

    name VLAN_CAM_MGT

    !

    VLAN 210

    name VLAN_DEPT1_Auth

    !

    VLAN 211

    name VLAN_DEPT2_Auth

    !

    VLAN 220

    name VLAN_DEPT3_Auth

    !

    VLAN 226

    name VLAN_DEPT4_Auth

    !

    VLAN 227

    name VLAN_DEPT5_Auth

    !

    VLAN 228

    name VLAN_DEPT6_Auth

    !

    VLAN 229

    name VLAN_DEPT7_Auth

    !

    VLAN 230

    name VLAN_DEPT8_Auth

    !

    VLAN 232

    name VLAN_DEPT9_Auth

    !

    !

    Interface Configs

    --------------------

    interface GigabitEthernet3/41

    Description "Link on eth0 Cisco CAM - PRI"

    switchport access vlan 52

    switchport mode access

    spanning tree portfast

    spanning tree guard root

    No cdp enable

    no ip address

    !

    interface GigabitEthernet3/42

    Description "Link to Cisco CAM - FO eth0"

    switchport access vlan 52

    switchport mode access

    spanning tree portfast

    spanning tree guard root

    No cdp enable

    no ip address

    !

    interface GigabitEthernet3/43

    Description "Trunk to eth1 Cisco CASE - PRI / no reliable network.

    switchport

    switchport trunk encapsulation dot1q

    switchport trunk vlan native 777

    switchport mode trunk

    switchport trunk allowed vlan 210,211,220,226-230 232

    !

    interface GigabitEthernet3/44

    Description "Trunk to eth1 Cisco CASE - FO / no reliable network.

    switchport

    switchport trunk encapsulation dot1q

    switchport trunk vlan native 777

    switchport mode trunk

    switchport trunk allowed vlan 210,211,220,226-230 232

    !

    interface GigabitEthernet3/46

    Description ' box Cisco CASE - PRI eth0 / Trusted Network. "

    switchport

    switchport trunk encapsulation dot1q

    switchport trunk vlan native 700

    switchport mode trunk

    switchport trunk allowed vlan 10,11,20,26-30,32,50-51

    !

    interface GigabitEthernet3/48

    Description ' box Cisco CASE - FO eth0 / Trusted Network. "

    switchport

    switchport trunk encapsulation dot1q

    switchport trunk vlan native 700

    switchport mode trunk

    switchport trunk allowed vlan 10,11,20,26-30,32,50-51

    !

    !

    interface GigabitEthernet1/1

    Description 'Link Trunk DEPT1 access SW'

    switchport

    switchport trunk encapsulation dot1q

    switchport trunk vlan native 700

    switchport mode trunk

    !

    ! - Example of Interface VLAN.

    interface Vlan10

    Description "DEPT1 VLAN.

    IP address x.x.10.1 255.255.255.0

    IP helper-address x.x.50.5

    no ip redirection

    no ip unreachable

    no ip proxy-arp

    no ip route cache

    no ip mroute-cache

    ! - No Interface VLAN for AUTH VLAN 210 -.

    *

    *

    *

    Access switch configuration

    -----------------------------------

    interface GigabitEthernet0/1

    Description 'Link to central office switch Trunk'

    switchport

    switchport trunk encapsulation dot1q

    switchport trunk vlan native 700

    switchport mode trunk

    no ip address

    !

    !

    interface GigabitEthernet0/6

    switchport access vlan 30

    switchport mode access

    spanning tree portfast

    spanning tree guard root

    No cdp enable

    no ip address

    !

    =========================================

    The above configuration is correct?

    Thank you

    The config looks ok, but we recommend the use of false VLAN native to be used on the trunk ports approved and unapproved.

    When you upgrade the client computer on concert 0/6, make sure that moving him vlan 30--> 230.

    Thank you

    Syed

  • L3 deployment OOB virtual Gateway

    Hi Faisal,.

    Nice day! I would like to ask about the L3 deployment approach using virtual gateway OOB. What I did was activated L3 support and applied static routes. When I tried to connect a client computer can't obtain an ip address. The cisco switch that I'm using the remote site were already discovered in NAC appliances. When I check the ports he set up the authentication vlan 100 but no passthrough. The IP block for the site is 10.19.x.x. What should I put a managed subnet and mapping vlan? But what I read in the manual without having to configure the managed subnet rather a static route must apply.

    For the virtual gateway OOB deployment L2 its market not now, the IP block im use is 10.1.x.x. I want to add L3 deployment for remote sites also for users authenticate by the NAC. I think to approach 2 for the NAC for L3 and L2 deployment for the main site to the remote site. Faisal, I'm doing it correctly? Please let me know what should I do demand and see the attachment. Thank you.

    Richard

    Richard,

    I don't think it will work. You're using VGW and trying to subnets of the NAC L3 hops away. In the case of VGW acts as a bridge. How are you going to extend your tags VLAN multiple jumps away to the untrusted interface of the SCA?

    Almost always us Let's customers who need NAC L3 subnets far hop use RIP because it is easier to separate and force no authenticated traffic to untrusted side of the SCA.

    HTH,

    Faisal

  • NAC Appliance IPv6 compatibility

    I read in the book "Cisco NAC Appliance: host security with Clean Access application ' (published 2008) that the real mode IP Gateway is only IPv4 compatible but that IPv6 compatibility will be provided in a future update.

    Having searched around, I find no reference to the unit of the ANC being IPv6. Anyone know what ways (if any) are IPv6 compatible?

    Hello

    Although IPv6 has been on the roadmap, currently it is not supported and there is no ETA for IPv6 supports the devices of NAC.

    HTH,

    Tiago

    --

    If this answers your question please mark the question as "answered" and write it down, so other users can easily find it.

  • Deployment of Out - of - Band NAC to wireless networks

    I am to evaluate the NAC for my users Wi-wired and wireless apparatus. I've read that the only way to deply to the NAC for the without thread is in-band mode, but it seems that the following link explains that it is possible to deply to the NAC for the in-band mode or out-of-band wireless networks:

    "NAC Appliance can be deployed for wireless LANs in a deployment in the endpoint Strip full-time scanning or out-of-band in a central site for periodic analysis in order to confirm compliance with the posture. The NAC Appliance server performs authentication, the posture and sanitation assessment. The server securely controls the traffic of users authenticated and unauthenticated by the management of traffic of the port/protocol or subnet policies, offering a management policy based bandwidth on share, or bandwidth by user or by using sessions on time and heartbeat checks. (Figure 1) »

    http://www.Cisco.com/en/us/prod/collateral/wireless/ps5678/ps6521/prod_brochure0900aecd80355b2f_ps6128_Products_Brochure.html

    Anyone know if it is possible to use the deployment of out-of-band NAC to wireless networks? If you can point me to documentation it will be appreciated.

    Concerning

    That's right

  • Cisco NAC Appliance

    Hello

    I wanted to know if anyone can give me help on a Cisco NAC appliance.

    Honestly, I've heard of them, but I've never installed or worked on a before and I

    have a client who wants to have one installed. So I wanted to know some here can

    point me in the right direction regarding the installation and configuration. Thank you

    the help in advance and have a very nice evening.

    Hello

    Everything you need to get started:

    http://www.cisco.com/en/US/products/ps6128/tsd_products_support_series_home.html.

    HTH,
    Tiago

    --

    If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

  • Web NAC NAC Appliance Agent Vs agent

    Hello

    What is the difference between 'NAC Appliance Agent' and "NAC Web Agent"?
    I my case I do not get the pop up 'NAC Appliance Agent' screen, although I am able to correctly connect through "NAC Web Agent.
    I would like to know if the connection via "Agent of NAC Appliance" is mandatory.

    PFA, the 'CiscoSupportReport.zip' for 'Agent NAC Appliance'.

    Thank you
    Sagar

    It is not mandatory to use the agent unless you specify in the policy for the role of user assigned to your username.

    The web agent can do most of what makes the installable agent, at least with respect to authentication and posture.

    Check the role assigned to your user as part of the management of devices-> own access and see what is required for this role.

    Hope this helps

  • NAC Appliance deployment problem

    Hello

    We are going to deploy Cisco NAC Appliance 3310 clean access server in our network. Regarding the deployment, I have several questions.

    My questions are:

    Is that what we required any additional server as WSUS for correction/windows update management?

    NAC device speaks with MS AD for authentication?

    We required server antivirus for endpoint security?

    We required server additional sanitation sanitize the infected end point?

    I will be happy if receive the answer above.

    Kind regards

    Martine

    Martinez,

    No, the CCA system asks the customer to correct itself and the Windows update client on the client computer, then addressed the function options. The two options are going to the servers of Microsoft WU, or if you have a WSUS server defined internally, which will.

    The other thing you can do is to 'offer' customers to download files that you store on the CCA based on different requirements system, but doing it this way would be very difficult to manage since you want to create rules for each patch that would very quickly become tedious.

    View this video-on-demand on how the CCA posture assessment and remediation. Watch VOD 5:

    http://tinyurl.com/d74t9u

    HTH,

    Faisal

  • NAC Appliance and LDAP Lookup

    Hello

    I have two CAM HA and two CASES in HA.

    I set up LDAP search to create role assignment rule.

    In this configuration is only a windows server to find the properties of the user.

    There is a problem when this servers Windows is out of service. There are configurations of attenuation when the server isn't here.

    Thanks to you all.

    The search server configs State LDAP use LDAP authentication provider. LDAP authentication provider says that you can have multiple entries in the unique field

    LDAP

    http://www.Cisco.com/en/us/docs/security/NAC/appliance/configuration_guide/413/cam/m_auth.html#wp1158614

    You can add LDAP authentication servers redundancy by recording several LDAP URL in the URL field of the server, separated by a space, for example:

    LDAP://ldap1. ABC.com ldap://ldap2.abc.com ldap://ldap3.abc.com

  • Basic configuration of NAC appliance

    I have a small project to authenticate users about 100 to access the network. We plan to use the Cisco NAC appliance. Just to clarify (I saw some post but I'm not sure of the correct answer) do I need 2 separate devices, one as a server and the other as a controller; or I just need a do two tasks?

    Thank you

    -Arturo

    Hi Arturo,.

    You need two devices to operate. A Manager and a server.

    There is a great Cisco Press book on the ANC by James Heary device that will give you a lot of details and information on the configuration of the devices.

    I hope this helps.

    Paul

  • NAC Appliance reporting to MARS

    Configurable MARCH for reports received of NAC Appliance CAM/ect? It is not an option for NAC under devices in MARCH.

    Thank you

    -KK

    I apologize for not going too far with my answer. Fortunately, there are NetPros who know much better than I the NAC.

    In summary:

    "During deployment NAC framework in your network, if the NAC router is already configured to send syslogs and NetFlow events to MARS, all you have to do is configure the router to send specific syslogs NAC."

    To answer your question, it is not the CAM/AR but the router that must be set up in MARCH. That's why you see no option under devices of MARCH for the CAM/CAs.

    I hope this helps.

  • NAC appliance purchase question

    Dear Experts,

    This summer we bought a Server Appliance from Cisco NAC3315-K9-500-500-NAC3315-K9.

    And we are about to begin its deployment. But to our surprise, we learned that it is a separate physical server to manage the NAC and NAC Manager license is required.

    Unfortunately, we bought the unit of the NAC with support (rather hasty) that management (CAM) and the access server (CASES) are integrated into a single box. But, after checking a configuration guide, he said that one or other of the CAM or CASES can be installed on the device.

    So is it possible to integrate them both on the same machine? Or must buy this CAM server that cost a fortune?

    Or alternatively, the cam can be installed as a virtual machine?

    Looking forward for your answer,

    Thank you very much!

    Hello

    You cannot run the cam and the CASE on a single piece of material (when you install the software, you must choose the Manager or the server prior to installation scripts), you must run on separate devices. However, you can get a job in Ise (licenses), which is the last product that can take advantage of all the features of the NAC in one device. However based on your network (amount of endpoints) it can easily take more material.

    ISE can run on devices that you have purchased, you will need to go to your cisco account representative or your partner of cisco in order to have their with the discount and you get to put on the same page on ISE (providing the demonstration or proof of concept).

    I supported the NAC and ISE and your best approach should not go forward with the NAC product now that ISE is out, it is a design much better in the way it integrates into your network, it uses also not only the manager and server, but it includes the profiling and reviews management services which are all of different products within the line of the NAC.

    Thank you

    Tarik Admani
    * Please note the useful messages *.

  • NAC appliance local authentication does not

    Hello

    I try a test for the NAC scenario. It's the gateway virtual oob

    I get the login page when trying to access the web, but when I try to authenticate to the local db that I get an error message and I am on the authentication screen.

    I listened with tcpdump on both interfaces. on the unreliable side, I see traffic but on the side confidence no difference in traffic doesn't appear (but maybe that's normal)

    can someone please help with detailed steps that follows authentication

    not only host--> nas--> nam (localdb)

    or some ideas

    Thank you!

    check the teporary certificates that you generated and set the field of domain name FULL to the nas ip address and so the nam

  • NAC Appliance OOB L3

    Hello world

    "My friend" (:-)) which I want to deploy NAC OOB L3.

    Why this one? Because it has a central location and a few branches (a little more in fact) and these branches are 2 hops L3 at the center ball. Specifically, there is a L3 switch as a gateway for users of general management of the LAN, and after that, a router that connects to the Center (GRE/IPSec).

    It is, and I failed to find or to realize by myself: it is mandatory to use a DHCP server to allocate ip-s to customers? (for all their States: permit unauthenticated, authenticated, etc.).

    If not, how it should be done?

    Second: if it is mandatory, must it only works with a DHCP server deployed centrally, or I can use the L3 switch in all industries as a dhcp server?

    Thank you for your patiance.

    DHCP is required for gateway real-ip L3 OOB given that the system will have to obtain a new address when it is permitted to VLAN and then again after the posture process when it is switched back to its VLAN 'normal '.

    As for the DHCP server, you can use a central server with a local switch provide addresses or a combination of both.

    In our facility, the local switch is the DHCP server for the auth VLAN and a local server is used to access VIRTUAL local area network.

    Mike

  • Cisco NAC appliance - after a success does not change users to connect to the vlan propper

    Hello

    I am new to cisco NAC BURNERS and I have to troubleshoot an implementation. It is a real OOB IP gateway configuration. Users can connect to the Pentecost the CCA, but after the connection of this success, they remain on the role not authenticated, as well as on this vlan. I checked the SNMP protocol and seems to work very well. Also, I checked the logs on nac_manager.log and there is nothing surprising, in fact I see nothing about this user or IP address that connects.

    Also the user does not appear on the list of users online on cam.

    Can someone help me figure out how can I fix? version 4.8, I'll post any information requested

    Thank you

    We recently had the problem with Windows AD SSO and Windows 7 clients.

    Would authenticate the XP clients very well, however, Windows 7 clients would not authenticate and will remain just on the authenticated vlan.

    Our question was looking for CASE SSO account, we installed on AD. It only support the encryption, WHICH has no Windows 7 64. We turned off "Use OF THE encryption" on the account authentication UNIQUE AD and re-tested.

    What are the parameters of the port-profile to which is applied the switchport?

    What is the map settings vlan ports trunk not approved or confidence?

Maybe you are looking for

  • Satellite A135-S4677 does not

    My laptop does not start. When I push the power button, the blue light comes on and the fan starts for a few seconds. After the fan stops nothing happens. No light on except the light output at the bottom as well. I had a recent episode where the lap

  • Windows Vista ultimate will not update

    When I try to run widows day in win vista ult the widowed window update come but its Blanck and will never load. I can't close it even without end for the Task Manager task. I also can't install things like Messenger for the page to install windows l

  • Cannot print in black color

    I reinstalled Xp microphone with office 2003 and now I can't print in black that I need to highlight every thing and print in a different color. Before you reinstall, everything was fine. Concerning Sean

  • Control of the double loop for a positioning system. - movement ocntrol

    I am currently a control of the double loop for a positioning system, I use the speedometer to read the speed and the encoder for position on the position of the platform. the problem I'm meeting now, is that I'm not sure weather the computer have th

  • I get error code KB70653 whenever my system updates, don't know what what it means__

    I keep getting error code KB70653 every time my updates of the system, don't know what it means