Virtual hosts and the CF Server installation

FC8 (yes I know, it must really be RHEL for support)
Apache 2.2.6

I'm testing on a new Web server to a client. We strive to use servers virtual apache with a single instance of CF8. It will be just a few virtualhosts, not a large amount.

After a few problems with the facilities and the connector, I was able to get CF8 running with apache. After you have configured the virtualhosts I could only get to the CFIDE directory after you add it as an alias in the virtualhost config.

If I try to pull up a test file of cfm to a virtualhost site SEE reports file not found. Yet he will shoot to the top of the site administrator. I guess it's because the path of the /CFIDE that corresponds to the root of the main Web server.

Can I run a single instance of CF on apache and its virtual hosts? I know that CF is running in the VirtualHosts as its a CF error screen However, it seems fair that CF is very confused when it comes to directory paths.

I fought the issue throughout the day. I was so happy to come across your post. Unfortunately, there is no attached response. :-( I thought about her in my installation. I hope that it will be beneficial to you.

It turns out that the problem was a permissions error. When Coldfusion was unable to read the directory of my virtual server there default wwwroot standard. To fix it I did a "chmod-r a + rX/home/jason/public_html. Then I tried loading the page again and everything was good.

Tags: ColdFusion

Similar Questions

  • Disable communication between the host and the virtual machine

    I have VM Server 2.0 and one of the virtual machines has the same name as the server and even if the virtual computer is connected to the host only network it generates the Windows error message: duplicate names exist on the network.

    is there a way to disable communication between the host and the virtual machines? I just need a virtual network that is isolated from my network complete and host also.

    Thank you.

    The GUI Server2 is not to choose the other unused vmnets.  Then edit your file VMX use a different vmnet of 0, 1 or 8.  (which are bridged, host-only and NAT)

    Thus, for example, if your VMX has a line that says:

    Ethernet0.VNET = "VMNet0.

    change to:

    Ethernet0.VNET = "VMNet2.

    (This assumes that you have not used the network Editor to fill the vmnet2 either).

  • Unable to connect the host to the OpenVPN server in VM

    Hi VMware wizards!

    I have a problem with an installation of OpenVPN that fact in my head.

    Basically I have an ESXi with a Windows 2003 VM host. In the virtual Win2k3 machine I use OpenVPN.

    I can connect fine VPN and access windows can host one (the VPN server) and the router and other hosts on the local network.

    However, I can not connect with the VMIC ESXi host, no matter what I do. I can't ping, nothing.

    It's as if the ESXi host will not a package through the virtual switch to another subnet to connect to the management subnet.

    The main network is and the VPN network is The router has a route static send to, which is the VPN interface on the Windows 2003 server which belongs to OpenVPN. The ESXi host has a default route to the router, and I can ping Internet from the service console.

    Still, all services on the LAN work as I expect of VPN, but I can't use the VMIC to connect to the ESXi host.

    Attached is a basic network design showing the configuration. It's pretty simple. I think it's a problem with the vSwitch or ESXi host somehow network config, but I am at a lost to troubleshoot any further... I can not ping the IP address of the VPN client from the service of ESXi console. Whatever it either to the service console simply refuses to go through the VPN, hosted by the virtual Windows machine.

    Ideas? TIA!

    > I install Ubuntu to host the OpenVPN instead of using Windows.

    Best solution. Ubuntu, it is also supported in ESX and you will have more control of it


  • Configure the host and the VM on two separate wireless networks

    Hello community, I was a browser for a long time, but this will be my first post.

    I would like to begin by saying that I have always found the answer I was looking for by browsing these forums and that I browsed discussions thereon and consulted the chapters regarding virtual networks in the manual workstation 7.1, but at this stage were still unable to solve my problem.

    The scenario:

    I'm a small business working in a House (upstairs) / hookah lounge (bottom). We recently had a second internet connection (WORK), Internet home of my family (HOME), to provide our customers with a free wi - fi. I would use the connection of WORK (during our hours of downtime) in a Ubuntu VM for folding and seeding of torrents. I want to put this far on a network traffic will not affect the other.

    The network:

    SE host: Windows 7 Pro 64-bit

    (Host) NIC: Intel PRO/Wireless 3945ABG (Mini PCI)

    VM: Ubuntu 10.04 on VMWare Workstation 7.0.0 build-203739

    NIC (VM): Alfa awus036h (USB)

    The current configuration:

    Network connection is made, the State of replication physical physical network is unchecked.

    The Alfa is connected to the virtual machine and is no longer present on the list of the network adapters in Windows.

    It seems that I have to manually disable the "auto eth 1" interface or the virtual machine using the internet connection in host rather than the network of your choice that the Alfa connects to in VMWorkstation. The speed of the internet with eth auto 1 is connected is quick and consistent, but using it defeats the purpose. Strangely, when I go to network connections, under the "last use" for "eth 1 auto ' it is said 'never '.

    When "eth 1 car" is disconnected, it seems that the virtual machine uses the network wireless connected to the Alfa. But the internet speed is very slow and inconsistent. On downloads, the speed varies considerably; Also, it remains at 0 kb/s for a while before going to 80 KB/s, then works his way down to 0 kb/s again.

    Possible solutions:

    1. it's a driver problem for the Alfa inside the VM environment all this time?

    2 just misunderstood how to set up this kind of virtual network?

    3 is it possible to get the desired configuration by filling the WORK and VMnet0/1/8?

    * Note: Only VMnet1 and VMnet8 appear on the Windows network connections, however isn't VMnet0 bridged one responsible for networking?

    4. upgrade to the current version of the desktop would be useful?

    5. do this problem originally because of some settings on the router?

    * Note: The AP is close enough to provide a signal strength of 85-90%

    Sorry to be so talkative, I just wanted to be as clear as possible because I'm still a beginner to learn more about virtualization.

    Thank you in advance, as always, your help is greatly appreciated.

    First of all, I must say that when I did this last response, I've been on my Mac and I thought the configuration of a host of Windows XP however outside the nomenclature of the names of the host network settings dialog box the rest stands as it is on a host Windows 7 as described below, including a picture as an attachment.

    On a Windows 7 x 64 host with two network adapters, each on a different subnet and VMware Workstation 7.1.3 installed with the editor of virtual computer network configured for VMnet0 and VMnet2 jumpered separately to one of the host of NIC and I have not changed the settings for Windows 7 host NIC-1 and have network/Internet connectivity to the host of this NETWORK adapter as shown in the picture of Google in Internet Explorer on the host computer.  In VMware Workstation 7.1.3 I have a Linux Guest configured to use VMnet2, which is filled in the settings and the Windows 7 host NIC-2 have all with the exception of VMware Bridge Protocol unchecked and have network/Internet connectivity in the guest as indicated by Google in a browser.

    From the perspective of connectivity network between the host and the guest by NIC - 2 on the host computer when all with the exception of VMware Bridge Protocol unchecked there is no connectivity between the two on this subnet because there are no protocol at stake to allow the conversation to take place.

    So theoretically and in practice what I said previously, but didn't were not expressly with a Windows 7 host in mind, nevertheless what I said is true and accurate, as evidenced by world real test/use by what I said and with the image attached herein.

    FWIW Windows 7 has been configured with the default settings and the only changes to the host's network were those made during the installation of VMware Workstation 7.1.3 so with the configuration I discussed with the attached picture, there is no reason why the host and the guest cannot be on different physical networks and each network/Internet connectivity based on the information I have provided and they be isolated from each other by being on separate physical networks.

    That said, even if they can be isolated by being on separate physical networks can still can connectivity between the 2 through VMware shared folders it it turned on and of course & slide and other services so if absolute isolation is necessary to the point where it can be, and the guest still operating system run on a Virtual Machine in the host you would need to disable the Backdoor for VMware Tools cannot provide shared folders on VMware, & glide and other services.  So if you need this isolation level let me know and I will provide additional information to complete it.

  • VMPlayer newbie - switch back and forth between the host and the guest operating system

    I am newbie to VMPlayer. I just installed VMPlayer 3.0.0 build-203739 on Red Hat Linux 5 (host). Then I created a VM comments Kubuntu (8.10). So far so good. In the VMPlayer window, I selected 'play Virtual Machine '. After this, the host operating system controls disappeared and I could see a taskbar on the top of my screen and I could also see Kubuntu startup (in an area of the small window in the center of the screen). The problem I'm running is that I'm not able to navigate outside of this area of the small window. I'm not even able to click/Select the taskbar of VMPlayer top of the screen. The mouse movement is limited to the area of the small window. How to and fro my host and the guest operating system? Is there a key combination? I finally had to stop my VM guest to return to the control of my host system. I guess it's a problem quite newbie that I am running. Any help would be greatly appreciated.

    Hello, welcome to the forum

    Host Windows to switch between comments and the OS (when you are in the guest operating system), you must use ctrl + alt.

    According to this link , it's the same thing in Linux host too.

    >Default VMware Player uses key combination Ctrl + Alt to jump out of the guest. Then CTRLAltdel is accessible via theAltInsert command. If you find this annoying, you can change the jump shortcut to CtrlAltshift by adding the following lines to your ~/.vmware/preferences:

    > pref.hotkey.shift = "true".

    > pref.hotkey.control = "true".

    > pref.hotkey.alt = "true".

    After your installation OS in the virtual machine, install "VMware Tools" on it so you will get better performance and some improvements (like moving your mouse out of guest to your host operating system operating system and Vice Versa, or be able to copy beyond host/guest, better resolution on reviews and...)

    I hope it helps a bit.

    -= If you have found this note/response useful, please consider awarding points to 'Correct' or 'useful ' = -.

    -= If there is a mistake in my notes, please correct me! =-

    -= Thank you =-

  • My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

    Could not open the MS Sites

    My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...


    Please let me know if:

    1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

    All other websites work well. problem only in trying to gain access to

    2. What is the operating system that is installed?

    Windows XP Pro.

    3. are you aware of the physical RAM installed?

    1 GB

    4 and it meets the minimum requirements of the browser you are using?

    For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

    Provide answers to the following questions.

    a. also mention the name of the operating system that you use.

    Windows XP Pro

    (b) is there an error message that is displayed when the site no longer works?

    trying to access the page from when rises, it is 'Impossible to view the Page.

    c. What is the browser you are using?

    Tried it on IE, mozilla and chrome.

    I tried to change the size of the memory virtual and also changed to the size of the managed system.

    formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

    tried to change the physical memory.

    Tried with different browsers.

    at the top does not a little luck. :(

    Method 1: Please visit the following link to change the size of virtual memory

    Change the size of virtual memory

    Method 2:

    See the following links

    WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  • Error: the capacity of the disk virtual parent and the child disk capacity are different (67).


    I tried to increase the hard drive of a machine space of 10 GB for a 20 GB virtual linux. I closed down the VM, then ssh was in the ESXi server. From there on, I ran the command:

    vmkfstools x 20 G Apatite.vmdk

    The command was executed successfully. Then, when I turned on the virtual machine I had and still do me:

    Reason: The capacity of the disk virtual parent and the child disk capacity are different.
    Cannot open disk ' / vmfs/volumes/503fd5b8-d1cef086-eb4a-10bf487b38db/Apatite/Apatite-000001.vmdk' or one of the snapshot disks it depends on.

    I tried many things such as the cloning of the Apatite.vmdk of Apatite - repaired.vmdk. That works, however, I get an old version of the virtual machine. I do not receive my changes of Apatite - 000001.vmdk or Apatite-000001 - delta.vmdk.

    I have a very important job on my VM that I am restoring. I should have backed up before doing anything else I've done. Now, it seems that I pay the price.

    Can someone help me get my VM? Is it possible to increase the size of the snapshot (Apatite - 000001.vmdk) or reduce the size of the parent so that they match, and the virtual machine start?

    Help, please.

    Thank you

    Apatite - 000001.vmdk
    # Disk DescriptorFile
    version = 1
    Encoding = 'UTF-8 '.
    CID = 79c3c056
    parentCID = cf2ec09b
    isNativeSnapshot = 'no '.
    createType = "vmfsSparse."
    parentFileNameHint = "Apatite.vmdk"
    # Description of the measure
    RW 41943040 VMFSSPARSE ' Apatite-000001 - delta.vmdk.
    # The database disk
    ddb.longContentID = "11ad79de6b5a5fe9218cfd7179c3c056".
    ddb.toolsVersion = "9216.
    modified entries are marked in red
    After you have made the changes - do NOT start the virtual machine
    Instead, remove from inventory and run
    vmkfstools 'Apatite - 000001.vmdk'-i 'consolidated.vmdk' d slim
    When did edit the vmx file and replace
    scsi0:0. FileName = 'Apatite - 000001.vmdk ".
    scsi0:0. FileName = "consolidated.vmdk".
    now, you can save the VM again.
  • Integration between Oracle apps R12 and the MySQL server.


    We got a requirement to integrate between the oracle database and the MySQL server.

    Payroll run in the Oracle Apps R12 and the need to develop an API to insert data of payroll results in MySQL database tables, it will be for 4.5 months as finance Modules of Apps will also apply for them, so that MySQL will be totally replaced by Oracle.

    Please suggest how to start integration, as it's my first time.

    I went through a document online, but it says 'updates, removal or insertion may fail' using the gateway dg4odbc, need to use 'different gateway called DG4MSQL, which requires the purchase of new licenses.'

    Thank you very much in advance.

    Kind regards



    As mentioned in your message, you must use DG4MSQL which requires the purchase of a new license.

    How to set up DG4MSQL (Oracle to MS SQL Server database entry door) 64-bit Unix OS (Linux, Solaris, AIX, HP - UX) post installation (Doc ID 562509.1)

    How to set up DG4MSQL (MS SQL Server database gateway) on a 64-bit Windows post install (Doc ID 1086365.1)

    How to troubleshoot common errors encountered when using the gateways of the database (DG4IFMX, Dg4MSQL, DG4SYBS), DG4ODBC or generic connectivity (Doc ID 234517.1)

    How to set up DG4MSQL (gateway to Oracle to MS SQL Server database) exit 11 on Linux x 86 32-bit post installation (Doc ID 437374.1)

    Thank you


  • How to share an IP address between the host and the VM?

    I'm a newbie on VMWare, and I hope that this question has a simple answer... I have a physical machine, I have turned into a VM today and am now running as VM on Workstation 6.5. This physical machine had a static IP address which must remain public, but I can't get a second IP address on the same subnet of the host. How can I get static IP even stay on the virtual machine without attributing an IP address of NIC1 host?

    Or is it possible to assign static IP address to the host NIC1 use somehow fill? That seems still, however, require an IP address on the host and the guest of virtual computer.

    I also looked in NAT, but I do not know how to assign the NAT specifically to NIC1 on the host. I have NIC2 and NIC3 with different IPs on different subnets.

    Thanks in advance.

    drmuzik wrote:

    So with the bridge, the NIC host does not have an IP address?

    Well the exact answer depends on those needs specific and explicit, but assuming that the physical machine will be connected directly to the Internet and the virtual machine uses a static public IP address then the physical machine may not have a public IP address if the only one you have is assigned to the virtual machine.  This is why I said delete everything except Protocolto Bridged from VMware on the physical target network adapter.

    Yet once if you had included the host and Guest OS operating system information it helps us to be more specific with answers to questions and given that you do not I will generalize and do not take the time to explain all the scenarios possible use cases.  In a case like this one containing explicit and specific local network topology details and that it connects to the Internet may also be useful to provide more explicit and specific answers.

    In addition if you have not already read chapters 14 & 15, covering networking, workstation users manual you should as it will help provide toys better understand virtual network infrastructure.

  • Drag-n-Drop omits both directions, Win7 x 64 host and the guest of WinXP

    Drag-n-Drop fails in both directions, using a Win7 x 64 host and the guest of WinXP.  I uninstalled VMware tools and restarted the prompt and reinstalled and rebooted, to no effect.

    Try to drag in the prompt gives the black circle with the fallen on line and try to slip outside the guest the mouse stops on the side of the screen of the guest.

    I've tested earlier tonight and has experienced a similar problem.  You run on a monitor mulitple or using the full screen?  I did both and the process drag-and - d├⌐poser was a little sensitive in this scenario.  I went to exit full screen mode and installs the VM on the screen as my main office and then managed to drag and drop without any problem.  The process drag-and - d├⌐poser seemed "positional".  If I did slide downwards and then it seemed to work more regularly when going back to the multiple monitor mode and full-screen.

  • How to configure WebLogic Admin Server and the managed server


    I work to configure a Weblogic admin and the managed server, but fail.
    Can I know the correct steps for the installation system?


    Good. It might be a good idea to mark this question as answered, then.

  • VPN and the visa Server

    Hello everyone,

    Do not angry with me if I showed him suddenly to the top and raises questions.

    I have 1 question to ask:

    Any body ever user Visa Server on a computer on which VPN client to connect to a shared network secure?

    I Im trying to do is set up a laptop computer (with the Client VPN + labview 8.6) remotely has direct control of equiptments this conect on another computer on the corporate network.  I can't make it work.  Any suggesttion is Normal 0 false false false MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} "}


    Thank you

    Tuan Phan


    Your VPN works, but you must remember that you must have the VISA runtime installed on the computer that you use for vpn to and have NO servers running on the computer you want to control. We must also ensure that the default IP address is that of your local computer, because once it is changed, it will adapt to an IP address of the system. Then go to network connections > advanced > advanced settings and make sure the top of the list is the IP address of the computer that you are not using the IP address, the computer is on the network. After you do this, the Run-Time VISA and the VISA server should focus on the same computer. Could you also make sure everything is configured correctly, as seen in the present document.

    I suggest also to research in panels of remote façade for your applications that is described here.  And here is information locking locking and unlocking of these applications.

  • Suggestion on Vcenter DB migration on the new virtual machine and enhancement vcenter server


    I'm looking for any suggestion/plan with Vcenter DB migration steps towards the new virtual machine, and then upgrade the server vcenter

    4.1 for Update1/2

    My plan will be

    (1) creating new virtual machine.

    (2) fresh install 64-bit OS

    (3) migration Vcenter DB of the physical server to the new virtual machine.

    (4) upgrade to Vcenter Server 4.1 update 41 4.1 Update1/2

    Anything else missing then please let me know.

    Thank you


    Hi vmguy

    I agree with this approach

    (3) migration Vcenter DB of the physical server to the new virtual machine.

    As long as you leave the old DB in tact and simply detach and copy the DB to the new Victoria Cross.

    Before you run the upgrade on the new VC and DB.

    This way, you have a restoration plan in case something goes wrong with the upgrade.

    Just to add:

    You must migrate the ADAM database so to maintain the specified permissions vCenter

    See: Migrateing vCenter new host

    Please allow points if you find this useful/correct

  • How to enable the communication between the host and the virtual from Windows 7 computer

    Host: Mac OS X 10.6

    Setting of networking: NAT (also connected to the VPN work)

    VM: Windows 7

    I use my mac for my development. I have an application running with the Web Server server. I also use the hosts so that I can map the URLS of different web site with the same ip address.

    For example:

    On my Mac in/etc/hosts

    On my virtual from Windows machine in the hosts file


    When I'm at the office and using bridged connections, it works very well. However, I prefer to use NAT all the time.

    Is this possible?

    Thank you!

    I actually already answer your question but now I know the details, and by the way you have explained so much better the second time!

    When not connected to the VPN on the host computer and the guest knows the IP address of the Web server on the host (an appropriate entry in the guest hosts) then it should work but when connected to the VPN, if you are administrator does its job well, that you should not be able to connect the host to the guest for the reason mentioned previously...  Authenticated/no unapproved system (guest) cannot access an authenticated / trust system (host), while the VPN on the host computer is set up to your corporate network.

  • How to make a jad file and cod file to a single file for hosting on the web server


    I want to make the jad file and cod file is a single file, which must be installed in the blackberry.

    When I load the jad without cod file file, it loads the app

    but when I load the jad file cod file, it loads the application on the blackberry device.

    I only want a single file to be uplaoded to the server for the installation of the application.

    Help, please

    I want it to install the web server to the BlackBerry smartphone.

    Thanks and greetings

    Anthony singh

    This is not possible, that both jad and cod is necessary to install an OTA application. the jad file contains a description of the application, the cod is the real application.

Maybe you are looking for

  • Billing and terms of payment

    I use an Ipad 4th generation of IOS 10. Today I was downloading a free app, I entered my password, and then it told me to update my payment method. He said credit card cannot be in the past. I don't understand, because my credit card expires in 2 yea

  • For Toshiba Satellite L300D - 21L 15,4 "AMD virtualization technology?"

    HelloI am looking at the Toshiba Satellite L300D - 21L 15.4 "for a while now, but I can't find any information on whether or not it supports virtualization of AMD." Referring to Wikipedia, I suppose, that the processor support, but I couldn't find an

  • PXI-8186 is not to ping requests

    I apologize in advance because I'm rather new to LabVIEW and PXI hardware. I have a NI PXI-8186 controller who all of a sudden can be reached via the network. The PC is connected to the controller via a hub.  I was able to ping another device also on

  • M07 firmware. R.0579 for the BDP-S580

    Question 1. For the new version of the firmware M07. R.0579 for Blu - ray BDP-S580 player. Will add this new video Format that allows me to play 3Gp or is it still types of Mpeg2? I use my DroidX a lot to the movies and I would like to take advantage

  • My Documents icon

    I accidentally deleted My Documents folder on the desktop icon.  Can I get it back without going to the system restore? I have the available shortcut icon, the folder itself has disappeared.