Virtual machine does not start after restoring from Time Machine to the new Imac

Similar Questions

• HP Envy k201na: my HP laptop does not start after restoration of factory settings removes the boot files

  I wanted to restore my computer laptop back to factory settings. So I went into settings and navigated to the update and recovery, recovery and then clicked the option restore factory settings. I had several partitions then asked me if I wanted to delete all of my drive or to remove all the windows disk was installed on. I clicked on the remove all option. Everything was erased from my laptop, I think that the boot partition has been altered to. Now when I start my laptop 0xc00000000f error code occurs and he said: 'you will need to use recovery tools. If you don't have any facility (such as a disc or USB device) support, contact your administrator for PC or PC/manufacturer. »

  

  An image of the system, that's what I used to fix my PC. I provided an image my PC with recovery media

• Satellite Pro 6100 Wireless does not work after restoring from HARD drive

  After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.

  Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.

  I have found some drivers Agere, but am not sure

  (1) if they are correct
  (2) how to install since the machine works in a way limited with the card in place.

  Any advice?

  Hello

  I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.

  (1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try

  (2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.

  But this is only possible if the windows started successfully

  PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
  I discovered that you need to update several utilities if you have installed SP2 on this laptop.

• Satellite M45 - does not start after restoration on the new HARD drive

  I installed a new PATA 250 GB HDD on my pc. The BIOS is configured to boot from CD/DVD. Toshiba Recovery disk started cold, start follow-up statement to load a new system on the HARD drive. He made a (quick) format on the HARD drive, spent 50 minutes, copy the files from the CD to the new HARD drive. Followed the instructions to remove the CD and reboot the pc. Did. I get the Toshiba homepage for 2-3 seconds, and then I get a white screen with a white block cursor in the upper corner of the LH of the screen. Looks like it does not find the block on the HARD disk?
  The procedure of collection 3 times with the same results. Checked the BIOS to check that it is configured to boot from the HARD disk after installation.

  The recovery CD is blank. Never used because I bought the PC (3.5 years). Put the new HARD drive in a USB enclosure and formatted with Windows, tried again with the same result? Put the old HDD, PC starts and works very well. Put the live CD Knoppix and boot from that, works very well. See the new HARD drive.

  Thus, any suggestions are appreciated. The recovery CD Toshiba is defective? In any case to test?

  Thank you
  -J

  Hello

  Sounds like a problem with the recovery disk or the new HARD disk if your computer starts up fine with the old HARD drive...

  In your case before you start a lengthy discussion, you should try a Microsoft Windows disk to install Windows. If he work it seems that only the recovery disk is defective.

  Otherwise, the HARD disk must be defective. Maybe a bad sector or something else

• X1Carbon does not start after restoration of the USB

  I have a new X 1 carbon 3443CTO Win8/64. After the configuration and test, I wanted to give it to one of my users so I did a "factory restore" using recovery media created by following the guides posted here and elsewhere:

  Control the media of Panel\Recovery\create etc.

  Went as expected. When I ran the recovery - I have taken a step further and called Lenovo as the step that calls for repartition disks reported ambiguously: 'No' (keep existing partitions) reported that a partition is not found "required" Yes seemed exaggerated. The tech told me to proceed by Yes.

  Once the recovery is complete - the system has rebooted. Restarted in the Boot Manager - I chose HDD0 and was immediately referred to the Boot Manager. I called Lenovo and referred to my existing case and told me; "Well do it all again" I did. Same result.

  So - I have created another USB key from a whole new 3443cto carbon X 1 and ran in recovery - same result.

  I then created another set of recovery on a new USB - same result media.

  When I access training with Advanced\Command prompt the windows directory, program files, etc are all there, but nothing I do (Ran BCD fix mbr etc.) will only boot disk.

  Any ideas?

  Today, I called Lenovo and the only choice that gave me was back which I guess I do.

  Question - is a downgraded supports or has a return Service support has deteriorated since last year?

  Before leaving the office, I decided to repeat the exercise once more. This time, I used USB 3.0 500 GB drive that I created last night. I ran the option "update files". When he finished the system booted Windows 8 However he presented me with an opportunity to enter a name and a password. The previous credentials did not work, nor null credentials and there is no option to create a new account.

  I have re-run recovery, this time choosing to keep partitions and basically do a factory instead of reformatting redefined and.

  Once completed, the system booted Windows 8 and the possibility to choose the country. At that time, I have dagprogramm off the system. I guess it's back to the new factory.

  My hypothesis is that in the course of the original tent to refresh something has gone wrong with the drive and running BCDedit solved the problem? Who knows?

  In any case-problem solved. What worries me is that never once in 3 calls, I did Lenovo has someone at - he tried to help me solve the problem. I am the author of the decision - I choose servers, desktop computers and laptops. We use Dell servers and desktop computers the Thinkpads for laptops.

  Support IF Lenovo has become this bad, I'll start to buy Dell laptops. I think I have to raise my w/Lenovo support.

• Vista does not start after restoration... all I get is flashing dashboard

  Has the problems with my computer so I decided to restore it in a few days in a good working condition...  I went through the process of restoration and after that he went to restart, I get a dashboard flashes after the start flag HP...  Help, please!

  Thank you

  Hi Josh peterson939,.

  ·         You receive an error message or error code?

  Follow the instructions below that may help you resolve the issue.

  Method 1: Remove external devices attached to the computer case and check if the problem is resolved.

  Method 2: I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 3: Follow the instructions in the link below and check if the problem is resolved.

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392/en-us

  Check whether the problem is resolved.

• 160 U does not start after changing from 4 to 8 GB Ram

  Hey community,.

  I just installed two new RAM DDR3 1066 MHz 7-7-7-20 204pin modules of Corsair SO-DIMM to improve my U160 somewhat. It runs a Win 7 Pro 64 Home and already has been improved with a Samsung 250 GB SSD.

  The BIOS indicates the RAM properly but no matter if I try for a normal start or economy mode, restarting the laptop once the windows colors appear when starting. 'Last known version' does not help, nor let him start via a bootalble pen which I also installed this version of Windows. Because there is no blue or black screen I guess it's not a physical problem, but a prob of victory.

  Someone an idea?

  Thanks in advance,

  Baschdel

  Maybe run mem test a bar at a time to see if its bad? run the test of mem on a USB drive or a bootable cd. Lenovo is known to support only a certain amount of ram, I guess to avoid problems and complications. It is not their problem if you exceed nominal max and it does not work.

  http://www.memtest.org/

• Service does not start after change of IP address on the server of SRM

  Here is the log.  The IP address has been changed, but I don't know how to take the side of MRS.?

  Journal of VMware Site Recovery Manager, pid = 4064, version = version 1.0.1 build-128004 =, = release, section = 2 option

  Cannot create the writer console

  Value flush dir "C:\Documents and Settings\All Users\Application Data\VMware\VMware Site Recovery Manager\DumpFiles"

  The initialization of the DBManager

  Current working directory: C:\Program VMware Site Recovery Manager\bin

  TaskMax = 10, IoMin = 1, IoMax = 21

  Try DrExternalRecoveryApi

  Plugin path 0: dr-external-recovery - api dll

  Absolute path of the plugin 0: C:\Program VMware Site Recovery Manager\bin\dr-external-recovery-api.dll

  Try RecoverySecondary

  Plugin path 1: dr-secondary - recovery.dll

  Absolute path of the plugin 1: C:\Program VMware Site Recovery Manager\bin\dr-secondary-recovery.dll

  Try SanProvider

  Plugin path 2: dr - san - provider.dll

  Absolute path of the plugin 2: C:\Program VMware Site Recovery Manager\bin\dr-san-provider.dll

  Try TestProvider

  Plugin 3 path: dr-test - provider.dll

  Absolute path of the plugin 3: C:\Program VMware Site Recovery Manager\bin\dr-test-provider.dll

  DrExtApi Instance of Service is initialized.

  Plugin has started.

  'SanProvider' provider has MoRef 'dr.primary.SanReplicationProvider:PrimarySanProvider '.

  Registered provider 'SanProvider '.

  'SanProvider' provider has MoRef 'dr.secondary.SanReplicationProvider:SecondarySanProvider '.

  Registered provider 'SanProvider '.

  Plugin has started.

  ' Provider 'TestProvider' has MoRef ' Dr. PrimaryTestProvider:primary - test provider.

  Registered provider 'TestProvider '.

  ' Provider 'TestProvider' has MoRef ' Dr. SecondaryTestProvider:secondary - test provider.

  Registered provider 'TestProvider '.

  Plugin has started.

  LocalSite already installed - good!

  Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000

  VC connection: connection as the user "administrator."

  VC connection: logged in session F5EDC747-1344-4F98-82FB-038BB9D42933

  The specification of proxy for extension com.vmware.vcDr points to 172.20.0.168, not to this host

  Check with the local VC server is not valid

  Initialization of service content: unexpected exception 'class Vmacore::Exception' record with the local VC server is not valid

  Application error: check with local VC server is not valid. Closing...

  Unable to send the request. A new attempt. Error: class Vmacore::CanceledException (operation has been cancelled)

  VMware-Dr. service stopped

  Z OS

  I tried this on my own server and that you couldn't make it work.  I ended up just reinstall SRM, keeping the same database - NBD since most of the settings are there anyway.  Later, I came across a blog (which I can't find now) that said that VMware supports only a reinstall after changing the IP address.

• VMWare Virtual Center Server does not start after Windows Update

  Help!  I'm under vCenter 5.1 on Windows 2008 R2 with SQL Server 2008 R2 Standard.  I have applied the latest updates for Windows (critical only) as it applied Service Pack 3 to SQL 2008 R2.

  Now the vCenter Service does not start.  It generates error 7024 in the Windows system log:

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  and error 1000 in the Windows application log:

  Could not initialize the VMware VirtualCenter. Closing...

  PS - I confirmed that the SQL instance is running.

  Absolutely nothing has been done except the Windows and SQL updates.  Everything worked fine until this point.  Ko an article deals with a "space" condition, but there are a lot of available space.

  I have attached the file vpxd.log, he created.

  Clues?

  Thank you.

  OK it turns out that the WWW service is interfering with vCenter Service on Port 80.  The thing is that the WWW service has been set to manual start.  Somehow during the upgrade Windows or SQL, one of them decided to turn auto-start. After the reboot, the conflict occurred.  Once I put the WWW back service to manual start the vCenter service started OK.

• Windows Vista does not start after installing Linux OS

  original title: Windows Vista does not start after the installation of the Linux OS... Help!

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  Hey Oscar Jose

  Download the correct ISO file and make a disk bootable from the link below

  Then use the Startup Repair option when you start from

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  or at startup press F11 to start the process of restoration of hp and see if you can reinstall vista from the recovery partition and place your machine, back to the way you bought

  warning you all data loss and 3 third-party programs that you have installed unless there is a non-destructive option in your hp recovery options

  Thirdly try to ask in a fedora forum to solve the problem, he has caused

  http://fedoraproject.org/

  Walter, the time zone traveller

• Does not start after the reload of the operating system

  OK, this is my story of boredom.  I have a Lenovo T61 Type 6463-5BU, S/N L3-xxxxx.  The hard drive died a few weeks ago, and since then, I have received a replacement drive under warranty, that is the exact same drive type.  We had a backup image of the old system under Norton Ghost and managed to get the image to the new disk once it has been installed.  To do this, we used a utility called OS
  'BartPC '.

  Since then, I did pretty much everything I can think of to get the system to boot, including playing with the BIOS settings, setting the drive to 'boot' and 'active' with the help of a number of public services, including the good old "diskpart" and many others.  The reader will just not start.  A few times I could read the disc using Bart in command prompt mode, but I never managed to boot from it.

  The laptop has a finger print reader, but I was told several times that this has nothing to do with the problem.  So... before I cut off the finger of a person and drag in the player... What am I doing wrong here?

  Note of the moderator; s/n, under the direction of protection own members

  AGoodSolutionideas can save I hope as your image.

  For later use, take a look at this document from Lenovo on the use of Ghost; Partition does not start after being restored with Norton Ghost - NetVista / ThinkCentre / ThinkPad...

  I know it says 'prior to 2004 systems', but it is still topical.

• vCenter Server Service does not start after P2V

  Hello community.

  A problem that I have not been able to solve and looking for help.

  Problem:

  vCenter Server Service does not start after that Windows Server was P2V would be.  We get an ERROR 2 of the Service.  Get the error of the system Windows 7024 event log.

  History:

  The client, I currently work with that tries to smash to the high location of the DEV VCENTER.  Location of DEV vcenter works now all for this site (domains, dns and all development servers).  If its VCENTER PRODUCTION of this location.  Currently, SQL Server (dedicated to vCenter), VCENTER and SSO are all sitting on the same box.  Let's break the SSO, SQL and VCENTER in their own servers.  However, the client wants to re - use the current physical server for SQL Server.  So I need P2V physical server existing until I can start the new environment.

  I was able to get all of the services working on the virtual vCenter (SQL, SSO, Update Manager etc etc) but have been unable to get the real vCenter Server Service works.  Fails every time with the 2 ERROR Code.  I was unable to get a KB of VMWARE item that corresponds to the issue I'm having.  ERROR 2 code has many articles and none have worked.

  Details:

  vCenter 5.1 Build 799731

  SQL 2008 R2

  Windows 2008 R2

  When the vCenter Service tries to start it will stop at the 50% mark and gives this error: (I removed the names for security reasons)

  Windows could not start the VMware VirtualCenter server on <server name>. For more information, see the system event log.  If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code

  When I saw the Windows system event log I get this error:

  EVENT ID: 7024

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  When I go through the vpxd log file I see this at the end of the newspaper: (I removed the names for security reasons)

  2013-12 - T 03, 16: 08:21.843 - 05:00 [info 09168 'dbdbPortgroup'] [VpxdInvtDVPortGroup::PreLoadDvpgConfig] loaded config VGA objects [0]

  2013-12 - T 03, 16: 08:21.844 - 05:00 [info 09168 "authvpxdMoSessionManager"] [OSP] [SessionManagerMo::Init] Admin URI value: https:// < name of vcenter server: Port #> / sso-adminserver/sdk

  2013-12 - T 03, 16: 08:21.844 - 05:00 [09168 "authvpxdMoSessionManager" info] certificates [OSP] [SessionManagerMo::Init] download m root...

  2013-12 - T 03, 16: 08:21.858 - 05:00 [01440 info "Default"] wire attached

  2013-12 - T 03, 16: 08:21.880 - 05:00 [09168 error 'vpxdvpxdMain'] [Vpxd::ServerApp:Init] Init failed: unexpected exception

  -> Backtrace:

  -> backtrace [00] rip 000000018018977 a

  -> backtrace [01] rip 0000000180100 c 98

  -> backtrace [02] rip 0000000180101fae

  -> backtrace [03] rip 000000018008aeab

  -> backtrace [04] rip 00000000005 b 4971

  -> backtrace [05] rip 0000000000551298

  -> backtrace [06] rip 00000000005516 c 9

  -> backtrace [07] rip 00000000004c0fae

  -> backtrace [08] rip 00000001405bbfb8

  -> backtrace [09] rip 000000013f4b0078

  -> backtrace [10] rip 000000013f4b016a

  -> backtrace [11] rip 000000013f4b0279

  -> backtrace [12] rip 000000013f4b0609

  -> backtrace [13] rip 000000013f7f2903

  -> backtrace [14] rip 000000013ff9e4b9

  -> backtrace [15] rip 000000013ff9835c

  -> backtrace [16] rip 00000001401b8a3b

  -> backtrace [17] rip 000007fefedca82d

  -> backtrace [18] rip 000000007783652d

  -> backtrace [19] rip 0000000077ccc521

  ->

  2013-12 - T 03, 16: 08:21.881 - 05:00 [warning 09168 'VpxProfiler"] ServerApp::Init [TotalTime] took ms 4603

  2013-12 - T 03, 16: 08:21.881 - 05:00 [09168 error "Default"] could not initialize VMware VirtualCenter. Closing...

  2013-12 - T 03, 16: 08:21.882 - 05:00 [09168 "vpxdvpxdSupportManager" info] free/busy information wrote

  2013-12 - T 03, 16: 08:29.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-39d3665d =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 08:41.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-da6b3df9 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 08:53.281 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-5086bf7f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:05.282 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-3abd7c64 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 09:17.283 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-b9c8c88a =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:17.353 - 05:00 [info 09168 "Default"] forcing of VMware VirtualCenter stop now

  I pulled the virtual machine in a laboratory and all network problems that would be removed to isolate.  Now the VCENTER is shouting at this topic it can't find one of its guests in the vdxp log, but that shouldn't matter.  All Services have been changed for local accounts.  All network and ODBC parameters are able to see the server... aka the server can see.  I didn't remove any software or drivers for the VM (techniques it is my third P2V to the same server for testing reasons)... And the only thing that won't start is always VCENTER SERVER... SSO is started, SQL is launched...

  Also everything remained the same on the virtual machine (DNS, IP, NAME etc etc). Stop the physical and start-up it upward don't show any problems.  Only when its summer P2V would have done that themselves.

  I can't get this number.  Need help.

  Thoughts?

  Thank you

  BostonTechGuy

  In this case, we have finished rebuilding the vCenter and all migrate on.  Wish had better put up-to-date, but ultimately, it's what has been done.

  Thank you

  BostonTechGuy

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• Two iMacs does not start after the 10.11.4 update.

  Two iMacs does not start after the 10.11.4 update.  Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd.  He then gets stuck in a loop trying to start.  Tried to reset the SMC and LANDAU.  Without success.  Started in recovery mode and ran disk utility.  Discs said OK.  Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).)  Installation is finished but still once does not start.  Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater.  Installation seems to work, but once again, the macs will not start.  Same 'unexpected launchd sigkill' error.  A mac is now back working properly with 10.11.3 the other will be shortly.  Is there a problem with the accession?  Our COMPUTER support use Munki to get updates from one day to the next.  Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.

  More information: two bricks iMacs were late 2013 models.  A 21 "and a 27.  We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.

• Portege R100 laptop computer does not start after a while without food

  Hello

  Well there is some time, I bought a beautiful used R100 - a laptop Toshiba in passing - but now, she has developed an annoying problem. Whenever it disconnect the laptop from the power supply for more than 2 hours about (don't know if this is not longer) I can't begin the R100, even if the battery indicator is green. After pressing the powerbutton the power led lights in green, and nothing happens. The "solution" to this problem is to give the R100 some time in this 'turned on' - State and after 15 minutes, I am able to start the computer (turn market again).

  I think that this could be a problem with a battery on the motherboard that is at its limits and needs time to gather enough power to start the computer.

  I hope you can help me identify the problem with my beloved laptop :)

  Yours,

  Tobias

  p.s. I have more or less need to identify the problem and some tips how to solve - the pleasure with the surgery will be from me :)

  p.p.s. Unlike the problem of the M400 further down, I've won if the beginning focused on the hard disk to Flash. In my case the R100 does not give a glance if it does not start. - And as a reference to the other post: "Hmm, I don't remember of the R100 fan not have it at all" * huggs its r100 * "."
  And I tried unplugging all the bits of the laptop and removed the battery, waited 15 minutes and tried to turn it on. the only way to obtain the departure of r100 is the method described above.

  You have an additional RAM installed?

  Maybe you need to re-seat, or it has a intermittent or heat associated with problem.