Virtual machines, run extremely slow when the console is consulted 2 virtual machines Windows Server 2008 64-bit, Windows Server 2003 32-bit, 2 VMWare for virtual machine

Similar Questions

• My MacBook Pro is running extremely slow all of a sudden. Help, please!

  My MacBook Pro is in running extremely slow all of a sudden, that way for several days now and I can't understand what is the cause.

  Details: MacBook Pro (13-inch, late 2011)

  Processor - 2.4 GHz Intel Core i5

  Memory - 4 GB 1333 MHz DDR 3

  Storage - 500 GB SATA (264.44 498.88 free GB) drive

  OSX - El Capitan 10.11.5 version

  I tried the simple things such as checking for indexing spotlight, my home screen of the size of the compensation, first aid running in disk utility, etc.. But had no results. Any suggestions would be very appreciated!

  Back up all data immediately, as the internal drive may be failing.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Dreamweaver cc 2014 running extremely slow

  Dreamweaver CC 2014 is running extremely slow - with essentially no response (using the split or any other mode mode). My version of CC works perfectly - fast and clean. I have not changed anything - I have to install the new 2014 CC and tried and it doesn't fundamentally. What is going on? I have an iMac 2012 - updated my OS a lot of RAM, etc. I have a lot of open fonts, but this has never done other programs - just wondering if perhaps behind the scenes its reading of all this stuff (why would it?).

  Thanks Preran.

  My external drives (nine in total) were originally of course DreamWeaver 2014 to a problem of 'mapping' of readers. However, by connecting the USB drives first, restarting and opening DreamWeaver 2014 once again, it worked as expected. Add two additional discs to high speed and restart again, all mounted drives and checking dreamweaver acted as it should and it behaved as it should.

  That solved my problem.

  Thank you

  Greg

• ADE 2 is extremely slow in the presentation of the ACSM files

  I bought a document that is in the format of the CMHA.  I don't know about this format.  ADE 2 appears to download the data and displays the pages, but is extremely slow in the pages of scrolling.  So slow they are useless.  Any change takes forever to accomplsh. I use an Apple MacBook Pro OS 10.8.3.

  I have no problem with reading all the ADE 2 "Getting Started" of the file that is unfolding as I wish the application to run.  I am considering the removal of 2 ADE and download it again, but am worried how that would effect the process of validisation.

  Robin.

  If you reinstall it shouldn't change validation/authorization.

  ADE is a way to get approval involved; If she's not bad

  CTRL-SHIFT-D to ADE to remove the old authorization (cmd-shift-D for you on a Mac)

  Restart ADE

  reauthorize

  ~~~~~~~~~

  You can find the old version v1.7.2 better, much more reliable in many ways that ADE2.0 that is a load of bug riddled with garbage.

  Version 1.7.2, is a little hard to find, available on the website of Adobe for Windows and for Mac.

  http://helpx.Adobe.com/Digital-Editions/KB/cant-install-digital-editions.html

  The forum software is sometimes corrupt the link above.  It should not be a white in "editio ns.  What follows is a redirect to the same page: http://tinyurl.com/diged172

• Airport extreme disconnects when the ivp6

  Airport extreme disconnects when the ivp6 but works perfectly with disconnected ivp6. I use Cox Cable as my internet provider.

  Apple says that Cox has not fully being implemented IPv6 yet.

  Cox said on their website that the Apple routers are not compatible with their IPv6 service.

  It is difficult to know who is right, but IPv6 works very well with Comcast and Time Warner... and routers Apple worked very well with Cox, until Cox began to make changes to their systems.

• can not be run Zoo Tycoon, when the running game does not appear anything, help me! my computer is Win7

  original title: subject zootycoon
  my computer can not be run Zoo Tycoon, when the running game does not appear anything, help me! my computer is Win7

  Hello

  1. what version of Zoo tycoon you play?

  2. is it works much earlier?

  I suggest to run the game as administrator and check.

  I suggest you to follow the steps from the links and check out.

  Improve the performance of your computer game

  http://support.Microsoft.com/kb/815069

  The problems of the game performance

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

• How to run an application when the cell phone is power on

  I want to run an application when the cell phone is power on. It runs in the background, how so, please give me a code, I don't know, thanks

  It is enough to set project properties in JDE as shown on the attached photo (check below: screenshot.png).

• Why illustrator cc 2015 went extremely slow after the last update?

  Why illustrator cc 2015 went extremely slow after the last update? Someone knows how to fix this?

  Envoy! Thank you

  preferences to reset/delete the AI seems OK for now

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• Internet the in slow motion - computer runs very slow when you use any program / application that uses the Internet

  I have Windows Vista 32-bit 2.4Ghs HP M91501, I had to reformat due to the error of hard disk. After formatting the PC, I went online to play or surf the internet is slow. I move fast and Lupe moves. I tried to highlight something and it takes up to 20 seconds before it highlites the message.  When I try to play Call of duty online I play in slow motion. Called Charter they did a speed test shows speed 11 Mbit/s download and 1 Mbps of download speed. All the solutions to this important really appriciated your feed back...

  I hope that Super Antispyware has given you the opportunity to remove those things. Since your initial Malware scan came clean, it is likely that located SuperAntispyware cookies only track, which are odious, but generally not a threat from System.

  It is possible that you have apps which unknown to you, that run automatically in the background whenever you start your program. It is good to check if they are legitimate and necessary to launch when you start your PC.

  Start button, click on you. In the run box, type: msconfig.exe

  A System Configuration tool runs. Go to the Startup tab. You will find a list of applications that are set to run every time your PC starts. If you recognize all of them, use Google to help identify their purpose. Many times, you can open the application that is in question and prevent the application from starting. For example, on my system, I see that Java runs once more a verification tool to update each time you start. In this case, I can set my preferences Java Panel, select Java and uncheck automatically search for updates.

  I also use OpenOffice and it wants to run a startup of service to reduce the time that openoffice requires to open. I don't really want something constantly running in the background to save me a few seconds to open the application. Then I go to Google to find out where the switch is to disable this "feature".

  If you have unwanted applications running in the background, it is best to either uninstall, our to disable the option that allows them to run at startup. Although you could definitely "uncheck" the application through msconfig.exe, it is essentially a tool of troubleshoouting and not intended for the struggle of the apps (even if you do).

  You can always uncheck/check again on this list to see their impact when you then restart your PC.

  Once you have verified that apps that are set to start, you can run Windows Task Manager and scroll elements in the process and Services tabs to see what is running. The Services tab can be pretty intimidating to investigate on (there is a lot of misinformation the ' net), so if you are unsure about the services listed, it is best to ask or to jump on this area.

• X220T EXTREMELY slow when you run OS USB Drive

  Hello world

  I searched high and low on this site and many others trying to understand what could be the problem without success. I am owner of a multitouch i7 8 GB X220t with the stock 250 GB hard drive. I've only had the 250 GB because I had planned to upgrade it, but then wouldn't spend the price exorbant for a drive of 7mm at the time of the purchase he treats so any type of. in any case, my unexpectedly crashed the other day, complete HARD drive clicking noise, not light with an external USB Sata or anything, I'm currently in St. Kitts (teaching of medical students) so I have a little wait until I can a new (600 GB Intel SSD!) so I tried to run ubuntu on a USB (I have a 32 and 64 GB once are supposed to be 'super speed' or something else transcend the) brand).

  Here's the weird part, when I run from the installation disc, using live cd, everything works super fast, MUCH faster than putting out the HARD drive and I thought that was becase the disc sports a (and I compared the other day) read and write speed 130mbps 150mbps. But now, whenever I have to install the OS on a disk (partition ext2 not logged or hell I even tried Fat32) the BONE becomes unbearably slow, gel for even the more meanial such as logon or typing or anything like that.

  Does anyone have AN idea why this happens? Is there a driver? or Bios problem?

  I want to save more than 8 GB of memory persistent on my 32 GB stick, and I have this situation for the next month, so please, any help is appreciated.

  Running an operating system on a USB stick is really slow because the USB ports are not very effective to transfer data.

  Now, if you had an ExpressCard with USB 3.0 ports and a USB 3.0 drive, you might be able to keep up reasonably well. I have not tested it myself, but the difference in the execution of a backup of my external SATA 3, 3 USB, HARD drive is incredibly fast compared to use it via the USB 2.0 connection.

  This could be worth in the future, considering you can get a USB 3.0 expresscard shell, disk HARD SATA 3 and 54mm, for cheap, close but not also have the security of the backup feature of cloned drive and rigour, the ability to run your entire operating system off the external drive.

  I forget exactly what I paid for that Setup, but I think the 750 GB SATA 3 was about $ 80, the expresscard (with two USB 3.0 ports) was about $ 40 and the sata 3 capable external tank designed for USB 3.0 and disk of the laptop was about $35. The external hard drive it's thinner than a pack of cigarettes and only marginally more wide/plus. The weight is also surprisingly little.

  Anyway, that might not help much now, but it would be a convenient emergency backup in the future, and it is fairly simple to put up with some software like Acronis offers.

• Apache 2.2 - 12 c WebLogic proxy behavior extremely slow when using SSL

  We find that extremely slow behavior (loading time of 1 + minute) when you try to access a Server WebLogic 12 c behind an Apache 2.2 web server.  We use the latest version of the WebLogic Apache plugin, which is designed for Apache 2.2.  It is under the 1.7.0_21 of Java on a virtual Linux of RHEL6 machine.  If I disable SSL and point the WebLogic plugin to the no - SSL WebLogic port, the page renders in less than 1 second.

  Note: Another machine with the same configuration (almost?) does not exhibit this behavior.  I'll call it the 'work' VM.

  I compared the httpd.conf, httpd-dist and WebLogic console configuration tabs between the two environments, and everything seems to fit.  The only major difference between these two environments is on the 'work' VM we're running WebLogic as a standard user; and Apache on the machine with a strange behavior, WebLogic runs as root.  We have not noticed any problems with such a configuration in the past.

  The delay between the request for page and page rendering is a little over 1 minute.  I turned on SSL debugging extended and looked through the newspaper, and I see the same delay when requesting.  An excerpt from my weblogic - server.log follows.  I don't know if the exception I see below is normal or not; I checked, and I see the same exception on our 'VM work' so I guess that this is probably not the culprit.

  My httpd.conf contains:

  < IfModule mod_weblogic.c >

  WebLogicHost my_host

  WebLogicPort 7004

  Proxysecurise WE

  ConnectTimeoutSecs 20

  WLSSLWallet/appl/apache/certs/my_host-oracle-wallet

  DebugConfigInfo WE

  WLProxySSL WE

  < / IfModule >

  Thanks in advance - any help would be greatly appreciated!

  Here's the log of WebLogic.  The Apache log displays any errors.

  # < 9 August 2013 4:56:01 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer' > < < WLS Kernel > > <><>< 1376085361752 > < BEA-000000 > < [thread [ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer', 5, Thread group to queue]] : "[weblogic.socket.Muxer']] weblogic.security.SSL.jsseadapter: SSLENGINE: try to get the certificates of the SSLSession, SSLPeerUnverifiedException peer: peer not authenticated." >

  # < 9 August 2013 4:56:01 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer' > < < WLS Kernel > > <><>< 1376085361753 > < BEA-000000 > < [thread [ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer', 5, Thread group to queue]] : "[weblogic.socket.Muxer']] weblogic.security.SSL.jsseadapter: SSLENGINE: negotiatedCipherSuite: SSL_RSA_WITH_3DES_EDE_CBC_SHA >.

  # < 9 August 2013 4:56:01 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer' > < < WLS Kernel > > <><>< 1376085361753 > < BEA-000000 > < [thread [ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer', 5, Thread group to queue]] : "[weblogic.socket.Muxer']] weblogic.security.SSL.jsseadapter: SSLENGINE: SSLEngine.getNeedClientAuth (): false >.

  # < 9 August 2013 4:56:01 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer' > < < WLS Kernel > > <><>< 1376085361753 > < BEA-000000 > < [thread [ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer', 5, Thread group to queue]] : "[weblogic.socket.Muxer']] weblogic.security.SSL.jsseadapter: SSLENGINE: peer certificate chain: null >.

  # < 9 August 2013 4:56:01 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer' > < < WLS Kernel > > <><>< 1376085361753 > < BEA-000000 > < [thread [ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer', 5, Thread group to queue]] : "[weblogic.socket.Muxer']] weblogic.security.SSL.jsseadapter: SSLENGINE: weblogic.security.utils.SSLTrustValidator.isPeerCertsRequired (): false >.

  # < 9 August 2013 4:56:01 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer' > < < WLS Kernel > > <><>< 1376085361753 > < BEA-000000 > < validationCallback: validateErr = 0 >

  # < 9 August 2013 4:56:01 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer' > < < WLS Kernel > > <><>< 1376085361753 > < BEA-000000 > < peer certificates are not necessary and are not provided by peer >

  # < 9 August 2013 4:56:01 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer' > < < WLS Kernel > > <><>< 1376085361754 > < BEA-000000 > < user weblogic specified validation trustmanager status 0 >

  # < 9 August 2013 4:56:01 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer' > < < WLS Kernel > > <><>< 1376085361754 > < BEA-000000 > < SSLTrustValidator returns: 0 >

  # < 9 August 2013 4:56:01 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer' > < < WLS Kernel > > <><>< 1376085361754 > < BEA-000000 > < [thread [ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer', 5, Thread group to queue]] [[: 'weblogic.socket.Muxer']] weblogic.security.SSL.jsseadapter: SSLENGINE: no failure of the trust, validateErr = 0. >

  # < 9 August 2013 4:56:01 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer' > < < WLS Kernel > > <><>< 1376085361754 > < BEA-000000 > < [thread [ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer', 5, Thread group to queue]] : "[weblogic.socket.Muxer']] weblogic.security.SSL.jsseadapter: SSLENGINE: successful post-handshake processing.» >

  # < 9 August 2013 4:56:01 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer' > < < WLS Kernel > > <><>< 1376085361755 > < BEA-000000 > < [thread [ExecuteThread: '2' for the queue: 'weblogic.socket.Muxer', 5, Thread group to queue]] : "[weblogic.socket.Muxer']] weblogic.security.SSL.jsseadapter: SSLENGINE: called SSLEngine.unwrap (ByteBuffer, ByteBuffer []): result = Status = BUFFER_UNDERFLOW HandshakeStatus = NOT_HANDSHAKING '.

  bytesConsumed is 0 bytesProduced = 0. >

  # < 9 August 2013 4:56:01 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < ExecuteThread: '3' for the queue: 'weblogic.socket.Muxer' > < < WLS Kernel > > <><>< 1376085361756 > < BEA-000000 > < [thread [ExecuteThread: '3' for the queue: 'weblogic.socket.Muxer', 5, Thread group to queue]] : "[weblogic.socket.Muxer']] weblogic.security.SSL.jsseadapter: SSLENGINE: called SSLEngine.unwrap (ByteBuffer, ByteBuffer []): result = Status = OK HandshakeStatus = NOT_HANDSHAKING.

  bytesConsumed is 2029 bytesProduced = 2000. >

  # < 9 August 2013 4:56:01 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < ExecuteThread: '3' for the queue: 'weblogic.socket.Muxer' > < < WLS Kernel > > <><>< 1376085361756 > < BEA-000000 > < certificates of treatment of Exception: peer not authenticated

  javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated

  at sun.security.ssl.SSLSessionImpl.getPeerCertificates(SSLSessionImpl.java:397)

  at weblogic.servlet.provider.WlsSecurityProvider.getSSLAttributes(WlsSecurityProvider.java:203)

  at weblogic.servlet.internal.VirtualConnection.initSSLAttributes(VirtualConnection.java:163)

  at weblogic.servlet.internal.VirtualConnection.init(VirtualConnection.java:74)

  at weblogic.servlet.internal.VirtualConnection.initSSLAttributes(VirtualConnection.java:163)

  at weblogic.servlet.internal.VirtualConnection.init(VirtualConnection.java:74)

  at weblogic.servlet.internal.ServletRequestImpl.initFromRequestParser(ServletRequestImpl.java:300)

  at weblogic.servlet.internal.HttpConnectionHandler.dispatch(HttpConnectionHandler.java:558)

  at weblogic.servlet.internal.MuxableSocketHTTP.dispatch(MuxableSocketHTTP.java:115)

  at weblogic.socket.JSSEFilterImpl.dispatch(JSSEFilterImpl.java:213)

  at weblogic.socket.MuxableSocketDiscriminator.dispatch(MuxableSocketDiscriminator.java:185)

  at weblogic.socket.JSSEFilterImpl.dispatch(JSSEFilterImpl.java:213)

  at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:965)

  at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:897)

  at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:130)

  at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)

  at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)

  at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:147)

  at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:119)

  >

  # < 9 August 2013 4:56:01 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < ExecuteThread: '99' for queue: 'weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1376085361758 > < BEA-000000 > < [thread [ExecuteThread: '99' for queue: 'weblogic.kernel.Default', 5, Thread group to queue: 'weblogic.kernel.Default']] weblogic.security.SSL.jsseadapter : SSLENGINE: SSLEngine.wrap (ByteBuffer ByteBuffer) called: result = Status = OK HandshakeStatus = NOT_HANDSHAKING

  bytesConsumed is 130 bytesProduced = 157. >

  (Note that more than one minute on here with no other journal entries!)

  # < 9 August 2013 4:57:06 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < DynamicJSSEListenThread [DefaultSecure] > < < WLS Kernel > > <><>< 1376085426938 > < BEA-000000 > < [Thread [DynamicJSSEListenThread [DefaultSecure], 9, WebLogicServer]] weblogic.security.SSL.jsseadapter: SSLENGINE: SSLEngine.setEnabledCipherSuites (String []): value = TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256, TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 ,TLS_RSA_WITH_AES_128_CBC_SHA256,TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256,TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256,TLS_DHE_RSA_WITH_AES_128_CBC_SHA256,TLS_DHE_DSS_WITH_AES_128_CBC_SHA256,TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA ,TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA,TLS_ECDH_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_DSS_WITH_AES_128_CBC_SHA,TLS_ECDHE_ECDSA_WITH_RC4_128_SHA,TLS_ECDHE_RSA_WITH_RC4_128_SHA,SSL_RSA_WITH_RC4_128_SHA,TLS_ECDH_ECDSA_WITH_RC4_128_SHA,TLS_ECDH_RSA_WITH_RC4_128_SHA ,TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA,TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA,SSL_RSA_WITH_3DES_EDE_CBC_SHA,TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA,TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA,SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA,SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA,SSL_RSA_WITH_RC4_128_MD5 TLS_EMPTY_RENEGOTIATION_INFO_SCSV. >

  # < 9 August 2013 4:57:06 PM CDT > < Debug > < SecuritySSL > < my_host > < CASWEBAdminServer > < DynamicJSSEListenThread [DefaultSecure] > < < WLS Kernel > > <><>< 1376085426939 > < BEA-000000 > < [Thread [DynamicJSSEListenThread [DefaultSecure], 9, WebLogicServer]] weblogic.security.SSL.jsseadapter: SSLENGINE: SSLEngine.setEnabledProtocols (String []): value = SSLv3, TLSv1, SSLv2Hello, TLSv1.1, TLSv1.2. >

  Thank you

  -sam

  Note that the ' javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated ", could indicate the Java has problems with the validation of the certificate.

  VeriSign must be present in the Virtual Machine cacerts keystore Java. What you can do is download the certificate using openssl, for example.

  ECHO | OpenSSL s_client-connect ${HOST}: ${PORT} 2 > & 1 | SED - don't ' / BEGIN-CERTIFICATE - /, / END CERTIFICATE-/ p'

  and then manually import it into the cacerts file, for example (extracts of Middleware: secure the WebLogic Server)

  keytool-import - alias some_alias-file some_certificate.pem - keystore ${JRE_HOME} / lib/security/cacerts

  The slow response may occur, in the sense that Java uses a random generator to slow (OS). Also in the ${JRE_HOME} / lib/security/directory there is a file called java.security. In this file the following line is present

  SecureRandom.Source=file:/dev/urandom

  On a Linux system, this must change for

  SecureRandom.Source=file:/dev/./urandom

  Now, it will recognize as a file and start actually using it, instead of falling back into the slow random file.

• VMware Fusion 3 running extremely slow...

  First of all, my MacBook Pro:

  Core 2 T9300 2.5 GHz

  4 GB memory

  250 GB SATA HARD DRIVE

  Snow Leopard 10.6.1

  VMware Fusion 3.0

  When I was with Leopard and VMware Fusion 2.x, the virtual machines run fast, but now they are extremely slow. BTW, I have activated the 64-bit kernel.

  I managed to find the reason, it's because the "mds" in the host OS process, is not a problem of the guest operating system. Everytime I turn on my Windows XP in VMware, "mds" will appear in the activity monitor window, and account for about 2% ~ 20% CPU, hard drive usage becomes noisy at the same time. What I could do is just wait, after about an hour, mds will be 'calm down' and my MBP back alone. But, when the next time I turn on my virtual machine, "mds" will appear again...

  "Mds" makes me crazy... I tried to google for answers, but no result.

  Anyone faced this problem too? Or someone knows how to solve the problem? Thank you!

  We found just a bug where in some cases fusion 3 will be a spotlight on every launch search (it is supposed not only to occur once), which seems to be exactly what describes this thread. You can work around this bug open Terminal.app and running

  defaults write com.vmware.fusion PLLibrarySpotlightSearchDone -bool YES
  

  Please let us know if that fixes things (or if not).

• Simultaneous report runs very slowly when the output format is 'XML' on IBM 6.1

  We have recently updated one of our test server database IBM AIX 5.3 to 6.1 operating system. We are witnessing a strange question in the execution time-out of simultaneous reports that have output in XML format (no server of publication and the Publisher). Whenever the output format is set to XML, the execution time seem to have increased very high than it used to be less than 5.3. A report to take 10 seconds which takes about 4 minutes to complete which is huge in comparison. Information about the version as below

  Oracle EBS 11.5.10

  Oracle 10.2.0.4.0 DB

  IBM AIX 6.1 OPERATING SYSTEM

  Oracle reports 6.0.8.28.0 (I know old enough)

  Provide expert advice.

  Thank you!

  All the

  We have solved the problem. I would like to share for the benefit of the readers of the community, if they are facing similar problems.

  The reason for the slowness of the report was due to lack of installation of the 'VIEW' option that is used when XML reports. Reports whose outputs are in format PDF, XML, HTML etc, Post Script, they all need a virtual display makes setup and configuration properties of config pointing to this server whenever settings are do. It could be a windows machine with X-Server running on it for display purposes or it could be services that are running on the same server for Unix/Linux applications where the application runs. We have installed VNC as X-Server that hosts services for virual (X) output for display on UNIX itself and have configured it in the reports configuration file. It seems to have solved the problem and the reports are run as expected (must faster!)

  Thank you

  Girish

• Convert an Esxi 4 2 Server VM runs extremely slow

  Hello

  I am very new to virtualization and have just the configuration server ESXi 4 that will replace the VM Server 2 systems we tested.  Recently, I tried to convert one of my server-2 VMs (Using the 'Converter Standalone Client') a VM (Version 7) Infrastructure.  After two days of continuous operation, the converter was only 5% finished and was transferring data to 24 kb/s (the server is ~ 150 GB in size).  This seems to be extremely slow and I hope that there is something that I can do to speed up that this server should run during opening hours and I like that, I can't take it down more than the weekend.

  I ran the converter Client on the server that hosts the virtual machine, and that server and the ESXi have dual network adapters connected to a managed switch of FD 100 MB.  (They are both on the same switch).  The virtual machine was not working and there was almost no other network activity going on during the conversation.

  Any help is appreciated

  The goal is to eliminate the things that it is not. Download your installation as simple as possible. I don't know what your problem is, but it certainly seems like a network problem. A single 100 MB network adapter should work much faster than the speed you receive.

  Other things to eliminate are pass the port problems, configuration issues, cable issues, NIC

  Run something like wireshark as you begin your conversion. See if you notice any problems in the capture.

  Create a new fresh installation of the VM on the ESXi host and check the flow rate etc. You don't want to go to production if you have problems. Monday will not be fun if you do.