Virtual PC stop working

After you have installed 10 windows virtual pc windows stop working error message indicates that the module is not found. What I do now, I would not have used windows 10 if I had not been informed by several people that it would not affect my use of virtual pc

I wouldn't mind, although I'm afraid that you have received some incorrect information (or perhaps just incomplete info) before you power up to 10 Windows.

Hyper-V works great and I use it often myself, but don't have some special rules.  First of all, you must have the "Pro version" of Windows.  If you have Windows 7 Pro before, then you should automatically have Windows 10 pro now, so that's fine.  But if you don't have a Pro, you will need to buy it.  Then, your processor must be 64-bit and have the ability to virtualization.

If you can say 'yes' to these requirements, then this getting started guide will help. It's Windows 8, but Windows 10 was built from Windows 8 and will work the same. http://Windows.Microsoft.com/en-us/Windows-8/hyper-v-run-virtual-machines

Tags: Windows

Similar Questions

  • Virtual sound stops working - Satellite A100

    Dear all

    I seem to have a problem with my virtual sound on my Satellite A100. It seems to work intermittently, often it doesn't work anymore and I can't control if it is on or off. If I reboot, it can start working again, but not always. I did a factory restore of the machine that clears the fault, but after a few start-up, it starts to happen again. It doesn't seem to be a reason for the problem.

    Has anyone experienced this problem and managed to work around it?

    Thank you

    Hello

    I put t don't know if this helps but try to update the utility audio virtual ansd the audio driver. To do this, check the Toshiba driver page.

    I put t know if it is interesting for you, but in this forum, I noticed that on some Satellite P100 crackling sounds/noises can be resolved by updating of all of the BIOS (v 2.1 or higher) and the audio driver.
    Need to first update the BIOS

  • My Synaptics touchpad virtual v7.13.0.1 of scrolling (HP ze4610 Windows32 XPSP3) suddenly stopped working with Mozilla 13.0. All the patches?

    Virtual Scrolling functionality works with PDF & Word 2007. He had worked with the old version of Mozilla...

    Hello, I do not know exactly but maybe this problem is related to the smooth scrolling feature, which has been enabled by default in firefox 13. you could try turning off again in preferences, advanced, General.

  • Adobe Flash Player and the Player r0 16.0 constantly stops working

    Since a few days now, firefox and adobe flash r0 16.0 Reader/Player does not correctly at all. If I find myself on a site like youtube or other sites with similar functions, I get bombarded several times with this message and can not do something. No matter which option I click to exit this box, either the "X", "check online for a solution and close the program" or "Close program" the same message appears just right back. ". Again and again and again until finally I'm pretty quick to close my front tabs the following comes. I have attempted to remedy this by disabling hardware acceleration, but I can't have real access the control panel to turn it off without this Player work. I don't know what caused it, or how to remedy this, I would really appreciate the help.
    Hope that is will have a good Thursday.

    Thank you!!!

    Oh I should mention. The "never enable" setting neither caused nor fixed crash / "stopped working" problem. It was a temporary cure to limit the frequency of the messages "Adobe Flash Player 16.0 r0 has stopped working" who came. I had 17 activated Version, but when it's a virtually identical message to appear constantly, I did the same, change the setting "enable ever '.

    It was the disabling protected mode which has solved the problem and helped the flash player to work again without stop or raise this message at all.

    The problem that took place afterwards where websites could not see that flash is installed on my computer was solved by changing the "never enable' to 'ask to activate '. I just wanted to clarify so everyone needs to use this thread.

  • Satellite L755-11j - cooling fan seems to have stopped working

    Hello

    I have the model Satellite L755-11j and I'm really happy with it, strong, fast and reliable, I have only one problem: my cooling fan seems to have stopped working.

    I don't know if it's a hardware or software (BIOS is set to dynamic switch, and in the power management is set to 'Active') delivers, because I come from Croatia, diagnostic PC is incredibly overpriced here and I can replace the fan on my own.

    I want to just make sure I don't buy new cooling fan and my problem persists. Install speedfan and Toshiba PC health monitor only confirmed what I suspected, my laptop gets hot.

    I bought the external cooling fan to help keep the temperature of my laptop down, but with the coming of the summer that I really want to solve this problem.

    To be honest, it is not easy to help you with this. Is that cooling fan works automatically and there is not a special option where you can control. Only thing you can change is the cooling method option that you can find in the advanced power options > Toshiba power saver.

    Check it please what option is set to on. Of course on this virtual path, it is not easy to tell if the cooling fan is defective or not.
    It works or not? Can you notice hot air flow when you put your hand on the cooling grill placed on the left side of your laptop?

  • HP Pavilion Notebook PC g6: IDT Audio PC stopped working

    Hello

    A few days ago I upgraded my Version of the OS of Windows 8 for Windows 10, now the question is the dolby sound system broke down.

    from the pc speaker sounds are too loud, I tried to display dolby at default settings but his error showing that "IDT PC Audio stopped working".

    Please suggest me the way to shortout this, thanks in advance.

    Here are the full details on my PC OS:

    Name of the operating system Microsoft Windows 10 unilingual home
    Version 10.0.10586 Build 10586
    Another Description of the OS is not available
    Manufacturer of operating system Microsoft Corporation
    Name of the KAMLESHJHAPC system
    System manufacturer Hewlett-Packard
    HP Pavilion Notebook PC g6 model system
    System Type x 64-based PC
    SKU C9L68PA #ACJ system
    Processor Intel Core i3 - 3110M CPU @ 2.40 GHz, 2400 Mhz, 2 Lossnay, 4 logical processors
    BIOS Version/Date Insyde F.25, 29/05/2013
    SMBIOS Version 2.7
    Embedded Controller Version 56.50
    UEFI BIOS mode
    Baseboard manufacturer Hewlett-Packard
    Model baseboard is not available
    Name of plinth base
    Role Mobile platform
    Start secure State
    PCR7 Configuration not available
    Windows C:\WINDOWS directory
    System directory C:\WINDOWS\system32
    Boot Device \Device\HarddiskVolume2
    The local United States
    Hardware Abstraction Layer Version = "10.0.10586.0".
    KAMLESHJHAPC\windows user name
    The time zone India standard time
    Physical memory (RAM) installed 4.00 GB
    3.89 GB total physical memory
    1.07 GB available physical memory
    4.89 GB total virtual memory
    1.18 GB virtual memory
    Page file space 1.00 GB
    Paging file C:\pagefile.sys
    Hyper-V - VM monitor Mode Extensions Yes
    Hyper-V - second level address translation Extensions Yes
    Hyper-V - virtualization enabled in Firmware No.
    Hyper-V - Data Execution Protection formerly name Microsoft Windows 10 single Home Language
    Version 10.0.10586 Build 10586
    Another Description of the OS is not available
    Manufacturer of operating system Microsoft Corporation
    Name of the KAMLESHJHAPC system
    System manufacturer Hewlett-Packard
    HP Pavilion Notebook PC g6 model system
    System Type x 64-based PC
    SKU C9L68PA #ACJ system
    Processor Intel Core i3 - 3110M CPU @ 2.40 GHz, 2400 Mhz, 2 Lossnay, 4 logical processors
    BIOS Version/Date Insyde F.25, 29/05/2013
    SMBIOS Version 2.7
    Embedded Controller Version 56.50
    UEFI BIOS mode
    Baseboard manufacturer Hewlett-Packard
    Model baseboard is not available
    Name of plinth base
    Role Mobile platform
    Start secure State
    PCR7 Configuration not available
    Windows C:\WINDOWS directory
    System directory C:\WINDOWS\system32
    Boot Device \Device\HarddiskVolume2
    The local United States
    Hardware Abstraction Layer Version = "10.0.10586.0".
    KAMLESHJHAPC\windows user name
    The time zone India standard time
    Physical memory (RAM) installed 4.00 GB
    3.89 GB total physical memory
    1.07 GB available physical memory
    4.89 GB total virtual memory
    1.18 GB virtual memory
    Page file space 1.00 GB
    Paging file C:\pagefile.sys
    Hyper-V - VM monitor Mode Extensions Yes
    Hyper-V - second level address translation Extensions Yes
    Hyper-V - virtualization enabled in Firmware No.
    Hyper-V - data execution Protection Yes

    JAI KAMLESH

    Hello:

    Have you tried the W8.1 audio driver?  If this is not the case, see if it works.

    This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

    File name: sp59649.exe

    Or try this one...

    This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

    File name: sp63555.exe

  • Tecra S5 - 14R: Toshiba Flash Cards stops working: Runtime Error R6025

    Hi all.

    Material: Toshiba Tecra S5 - 14R
    I have a problem with the software Toshiba Flash Cards.
    When it starts I received a "R6025 - pure virtual function call" error, and then microsoft alert that Toshiba Flash Cards software stopped working

    I use Windows Vista Business 32 bit OS and I downloaded the new version of the software Toshiba Flash Cards (v.2.00.05), but this does not solve the problem.

    If someone could help?

    Hello

    It seems that this error is known for support of Microsoft people, and so they have published an article in the knowledge base.
    This error is also displayed if you run the Microsoft Money software.

    Please, try the steps outlined here:
    [Runtime error: "R6025-virtual function call Pure" | ""] http://support.Microsoft.com/kb/240437]

    I would recommend this as:

    1. disable Flash cards
    2. Click Start, type cmd in the search box and press ENTER.
    3. at the command prompt, type the following lines one at a time and then press ENTER after each line:
    -regsvr32 softpub.dll
    -regsvr32 wintrust.dll
    -regsvr32 initpki.dll
    -regsvr32 dssenh.dll
    -regsvr32 rsaenh.dll
    -regsvr32 cryptdlg.dll
    -regsvr32 gpkcsp.dll
    -regsvr32 sccbase.dll
    -regsvr32 slbcsp.dll

    4. again turn on the Flash Card Utility

  • my Skype has stopped working

    I updated latest version of Skype and I use family vista premium, I can always connect but after a few seconds message appears on the screen of Skype has stopped working...

    Looks like you have successfully updated from Windows XP to Vista, but have not updated device drivers. They are virtually all versions of Windows XP. Try firat to update drivers:

    http://www.service.ASUS.com/#! downloads/c1wax

    In addition, uninstall application ASUS Virtual Camera, this virtual video capture device we know conflict with Skype.

    Also, make sure you have the latest version of IE9 Internet Explorer installed.

  • Skype has stopped working! Windows 8.1

    Hello

    I just bought HP laptop with windows geiuine 8.1 15 - Skype was all working fine but suddenly don't know what has happened he got crashed and now whenever I start it - it crashes and says "Skype has stopped working".

    % Appdata % technique but also tried reinstall too - nothing works!

    I have attached the DxDiag report so that you can look at my PC correctly.

    Thank you

    Mercier

    You probably IM magician software installed on your computer and this software conflict with Skype.

    http://www.immagician.com/indexen.htm

    Try to uninstall this software.

    In addition, you have CyberLink YouCam application installed. This app crashes and is likely to cause problems with Skype too.

    Uninstall this application virtual CyberLink YouCam webcam.

  • My Satellite L755 HDMI - output 16 M has stopped working

    Hello!

    I have been for long the my Satellite L755 HDMI connection to a TV, but a few days ago it stopped working. The laptop detects the TV and identifies it as Samsung, but there is no signal on the TV screen.

    Outputs HDMI to the TV and cable are ok because I can run other devices. Tried to activate HDMI thanks to push "FN" + "F5" key (I choose the TV screen), changed the resolution, updated Nvidia drivers, nothing works. My OS is Win7 64.

    I know that the only signal is seen on TV, the screen is when I restart the computer; the I can see on the image on the screen of the TV for a few seconds (while "starting windows" is displayed) and not good image, with lots of red vertical lines on the screen. After a few seconds, no signal again on the TV screen

    Can anyone help? Maybe it's a hardware failure?
    The laptop is no longer under warranty.

    Thank you.

    Hello

    It is not easy to say what may be wrong with that. I think that it will help much, but have you tested the feature with different HDMI ports on the TV?
    Have you tried to roll back the OS (System Restore) to an earlier time when everything was OK?

    On this virtual path, that it is not possible to provide the diagnostic but ultimate test right, you can do if you reinstall OS using original recovery image and test in functionality with the factory settings.

    What do you think of all this?

  • Adapter Ethernet Thunderbolt has stopped working after update 10.11.2.

    Hello, after my update to 10.11.2 on my MacBook Pro retina 15 "mid-2015, my crush Ethernet Adapter has stopped working. It comes in the reporting system and it shows that it connected to ethernet, but in the network Panel, the State remains red and I don't get an IP address.

    My colleague who has a MacBook 2013 15 "retina Pro also has the same problem. We tried the retail adapters Ethernet Thunderbolt, but still no connection on one of our networks.

    Anyone else see this behavior?

    Same problem here on my end 2013. In Recovery Mode, the card works (good trick to know if hardware is broken). Roll back via Time Machine works 10.11.1 and adapter. Adapter and 10.11.2 relocation does not-MBP-R all my colleagues in different years work well after the update.

    BTW. : not only Thunderbolt Ethernet does not work, but the cards virtual Parallels (for shared and host-only) as well (only bridged mode works).

    So far, all the stuff has failed. And now I will notify again before the update.

  • Keyboard touch U430 stops working randomly in Windows 10

    Since I've upgraded to Windows 10, keyboard stops working randomly in different programs. For example, it might stop working in Firefox, but at the same time it would work very well in Chrome and Notepad. Or it stops working in Chrome, but works very well to edge and Firefox. Most of the time, closing and opening the progrm do nothing, only a reboot solves the problem for a while. I should also mention that, while the keyboard stops working in this particular program, the program itself is not frozen and it works fine if I use the touchpad.

    Not sure if MS or Lenovo is to blame, but Lenovo should look into it.

    Found the culprit. 16.0.0.614 Kaspersky virtual keyboard. For the disabled that and no more problems.

  • Several months ago the button, if that's what it's called, the task bar that displays hidden icons has stopped working.

    Original title: the task bar icons

    Several months ago the button, if that's what it's called, the task bar that displays hidden icons has stopped working. Can I get a virtual device driver format in the registry is incorrect when you use a disk with the drivers on this subject. I found information on how to correct this problem and now the botton of task bar work again although it works until the computer is used for a while. How is the hidden icon button suppose to work or it should be visible all the time? Also the virtual device driver registry entry has something to do with it? I think that the problem of the DMV has installed a Norton program antivirus software that was on a disc that came with the computer.

    Hello

    1 have had any changes made to your computer before this problem?

    I suggest you try the methods mentioned below and check if it helps:

     

    Method 1:

    You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Hope this information is useful.

     

  • I get a Microsoft Search Protocol Host has stopped working the alert box. How to solve this?

    I get a Microsoft Search Protocol Host has stopped working the alert box. How to solve this? It gives me the option to 'Search online (recommended)', but when I click on it nothing happens. Tried to restart and used Malware Bytes and my security suite Norton to seek something malicious, without success. Any suggestions?

    Hello

    1. have you made changes on the computer before this problem?

    2. when exactly you get this error?

    I suggest you try to reset to a new start Indexing Options by removing and then rebuild the index and check if it helps.
    Your search index requires virtually no maintenance. However, if the index looking for files that you know problems must be in a location indexed; You may have to re-create the index.

    To rebuild the index:

    a. open indexing and Search Options by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Indexing Options.

    b. click Advanced Options, click the index settings tab and then click on rebuild. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    See the link below for more details:

    Improve Windows searches using the index: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

    For more information, see the following Microsoft articles:

    The problems with the search
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-searching

    You can also check out the msdn below link for a similar problem and see if that solves the problem:

    http://social.msdn.Microsoft.com/forums/en/windowsdesktopsearchhelp/thread/53f6e6e0-89F0-47D8-A812-3a7d7c7e4c63

    Hope the information is useful.

  • vbicviu jyhzco has stopped working

    When I restart my computer I got this message: "vbicviu jyhzco has stopped working" don't know what it means? below this message it is said that: a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available.

    I have a Windows Vista Home Premium 32

    Hello

    Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If the error persists after scanning use this program to out startup

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

Maybe you are looking for

  • no connection between my Palm Tungsten E2 device and the desktop

    Operating system windows 7 HotSync problem appears and says please check your configuration and try again. local use with cable any ideas would be useful. Thank you

  • Satellite U500 - problem installing Windows 7 64 bit

    Hello I just bought a U500 laptop and am trying to install the 64 bit version of windows 7.It is obtained in the section "Installation program starts Services" and comes with a Setup error saying that the laptop needs to be restarted.When it is resta

  • Fan has stopped working on the satellite

    I've had the laptop for jusy 7 weeks and the fan has stopped working. It always seemed that he ran too to what looks like at full speed almost constantly, but now its stopped. I just tried to call the helpline and ended up leaving a message to be rec

  • When you connect in the apple store, I get an unknown error, please help?

    Hello I had an apple for a long time but ID that you have not used for some time, well now I'm opening a session @ my work on my old apple ID in the apple store, I need to download anything to unzip the .rar files and I need to download it from the a

  • HP Envy M6 dx1205: spare battery want M6

    My original battery appears to be dead.  I ran several tests using information I found on this forum.  (I have a 0% available, hip, does not support message on the battery in the status bar icon).  I ordered a replacement battery which was not OEM.