Virtual WiFi not presentation, it disappears from the network and sharing Center.

Similar Questions

• XP has disappeared from the network and I can't get it back

  My XP machine does not appear on my network more.  My network with both XP and a MAC wireless machines worked fine until I added a desktop Windows 7 computer.  Now, one of my XP machines disappeared from the network and I can not get it back.  I have run the Configuration Wizard from the network a million times, but the device still does not appear.  What I am doing wrong?

  From the other thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/windows-xp-machine-does-not-show-up-on-network/fadc36ac-73de-428f-9018-bedebd72cb2d

  Title: Windows XP machine does not appear on the network after that Windows 7 has been added. Also have Mac on the network as well.

  I set up a home network with two XP machines connected to my router and a Mac with a Wi - Fi connection.  I added a Windows 7 machine and now one of the XP machines does not appear as a member of the Working Group on all machines (including itself!) even after the wizard as many times.  Curiously, I can share files and printers.  How can I get this machine to appear on the network?

  original title: home network problem

  Hello

  The following article might be useful:

  Solve problems with computers not appearing is not in the network map

• How can I connect to the internet? Problems involving the network and sharing Center does not.

  Hello.
  I live in a House and bought a range extender so that I can get a connection in my basement as well.  I have installation range Extenders without problem.  When you install the range extender, I changed my name to my network router.  I changed the name of the network by typing 192.168.1.1 in my browser.
  The MacBook connects without a problem.  In the basement, the connection of Windows 7 works very well.  I have just connected Vaio Windows 7 my mother to the network, but it prompted that I enter the user credentials.  I read a post above and got that problem solved by opening the network and sharing Center and adding a new connection.  Now that the connection is configured correctly.
  The problem is with the laptop HP Windows Vista family basis.  Since I install the range extender, I can't connect to the network.  He had no problems before you connect the router or other networks to visit other places.  The new network name appears, but when I click it, it says I have to enter the user credentials.  I tried to manually, but the name is taken so I can't make a new and invites me to connect to the network that is established or to connect to a different network.
  • I tried to open the network and sharing Center, but it does not open.  When I click it, it opens a screen for a brief second.  The option "Display the status of network and tasks" opens either.

  • I logged as an Administration by entering the command line < net="" user="" administrator="" ctive:yes=""> > and restarted the laptop.  Even logged in as administrator, this folder does not open.

  • I also did a scan < sfc="" cannow=""> >.  The digitized rolled up with an error, but the error has been corrected.

  • I also updated the connection of the range extender.

  Why the network and sharing Center will not be open to the top?
  How can I configure my router my HP Windows Vista Linksys connection?
  Thank you.  Please let me know if you need more information.

  Thanks for your reply.

  In a last attempt, my sister has used the ethernet cable to connect directly to our router.  Next time, she turned on her laptop, she managed to connect to our wireless network and she was not invited to enter credentials.
  In this case, the manual connection helped solved the problem.

• restore service dependency for the network and sharing Center

  How to restore the dependency service or group who couldn't start for network and sharing Center?

  Hi patto1708,

  If it was something that was already previously and failed after certain activities on the computer for which you are not aware of, then the best possible thing to do is run a system restore. This will ensure that your computer is back to operational status.

  For more information about the system restore, you can see the link: http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

  Or you may need to check for the dependency of the network and sharing center services and start them manually when they are stopped manually.

  See the link: http://windows.microsoft.com/en-US/windows-vista/Manage-services-in-Windows-Vista-from-Windows-Vista-Inside-Out to learn more about how to manage services in Windows Vista

  Kind regards

  SAP U G - Microsoft Support

• Unknown error in the network and sharing Center

  When I opened my network and sharing Center where the active networks would be just said

  'Unknown '.

  and

  "The account specified for this service is different from the account specified for other services running in the same process"

  If I open Services.msc and check the list of networks and Network Location Awareness service, both are on automatic and both connect as a network Service.

  Network list service does not work and does not give the error:

  Error 1079: The account specified for this service is different from the account specified for other services running in the same process

  I'm connected to my home network and have internet access and also a local access to other computers, it's just not appearing is not on the network and sharing Center.

  A result of this is that some of the metro apps don't report any internet connection and will not start. I currently now disconnected my microsoft account on the computer and use a local account, but the problem is still there.

  I also tried

  netsh winsock reset

  from an administrator command prompt but no change.

  Can anyone help?

  Hi Andrea,

  Please keep us updated.

  This can be shown because of missing or corrupted system files. This is why I would recommend running the System File Checker tool, which is a Windows utility that allows users to find corruptions in Windows system files and restore corrupted files.

  To do this, click Start, type command or cmd prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  At the command prompt, type the following command and press ENTER:

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  I hope this helps. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• When I create an ad hoc network on my laptop HP using Win7, I find in the 'manage wireless networks' (in the network and sharing Center)

  Hello, when I create an ad hoc network on my laptop HP using Win7,

  I can't find it in the 'manage wireless networks' (in the network and sharing Center)
  can you help me please?

  Hello

  In case there are problems with your computer or it network devices check
  with HP, their documentation online support and drivers, diagnostics, and
  Ask problems known in their forums.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ==========================================

  The routers are much easier and they don't cost much.

  These should help:

  References to Vista also apply to Windows 7.

  Set up a computer-to-computer (ad hoc) network
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad hoc networking - how the network with the funny name can make your life easier
  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

  How to build a wireless network without using a router at wide band (also Windows 7)
  http://www.hardwaresecrets.com/article/how-to-build-a-wireless-network-without-using-a-broadband-router/418

  Build a Wireless Home network without a router (also Windows 7)
  http://www.labnol.org/software/wireless-network-without-router/11494/

  How to share files and printers on your network
  http://www.hardwaresecrets.com/article/how-to-share-folders-and-printers-on-your-network/247

  -------------------------------------------------------------------------

  Other solutions include the use of these that turn your WiFi PC into a virtual router
  instead of using the ad hoc network.

  Connectify
  http://www.Connectify.me/

  Virtual router
  http://virtualrouter.codeplex.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot turn off or disable password protected sharing the network and sharing Center

  I'm trying to turn some pretty simple sharing of files between our windows PC (two portable minicomputers running under XP, a desk and a laptop running vista). File sharing functions between the XP computers. However, I am simply unable to influence the "password protected sharing setting" in the network and sharing Center. I check the option to turn it off and I get a click through UAC dialog window, the mouse cursor turns for a short time while as if windows is pretending to do something, but the password protected sharing setting is always on.

  I tried to disable Avira Antivir.

  I enabled the guest account and set its password to a string explicitly empty with net user guest «»

  Nothing helps.

  svampi,
  This knowledge base article can be useful for you.  Although the problem that it is designed for the difficulty is not the same as yours, the underlying cause is the same.  There is an article to 'fix', which means that you can click the 'fix' in the article so that it automatically fixed for you online or you can follow the instructions to edit the registry yourself if you feel capable of doing that.  So check that out and see if it helps with your problem:

  http://support.Microsoft.com/kb/947232

  Let us know if this can help, or if you still need help.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No network adapter is displayed in the network and sharing Center

  My internet connection works very well through a router, but if I go to the network and sharing Center and click on change adapter settings, I get a blank page.
  The adapter appears in Device Manager and it is used by the computer as disabling it kills the internet connection.
  I think that's the reason that I have a network with a red X icon. The ToolTip that appears when the mouse passes over the icon said access to the Internet.
  What would cause the network to do not "see" the adapter, even if it's to use?
  The adapter is a Netgear GA311 gigabit and compatibile with Windows 7.

  Have you installed the drivers of www.netgear.com?

• Intel wifi adapter xps m2010 disabled in Device Manager and in the network and sharing Center

  Original title: intel wifi adapter xps m2010

  for some reason any my intel pro wireless network adapter not turn on using the shortcut keys or by selecting with the mouse. Says its disabled in device in network and sharing Center Manager yet it does give me the option to activate it. Im confused

  Hi pillowgod,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  You can check the following link and try to run the manual Intel WiFi diagnostic tool to check the functionality of your WiFi adapter.

  http://www.Intel.com/support/wireless/WLAN/sb/CS-025780.htm

  You can also try uninstalling and reinstalling the Intel wireless card and check.

  a. Click Start and type in Device Manager in the start search and press ENTER.

  b. expand the network adapters in the Device Manager

  c. right-click on the device, and then click Properties

  d. click on the driver tab and click on uninstall the drivers and click OK.

  e. restart the computer and check.

  You can also see the Intel Web site and try to download the latest version of the card wifi drivers.

  http://Downloadcenter.Intel.com/default.aspx

  You can also check out the link:

  http://www.Intel.com/support/wireless/WLAN/sb/CS-025807.htm

  Hope this information is helpful

• Windows 7 64 bit... ""? "shows"See the whole map"in the network and sharing Center window"

  Hi guys

  I've been struggling with this problem for a few weeks and need help. When I open the control panel; Network and Internet; "Network and sharing Center", at the top of the page to the right, I have an option to view the connections of the network (see map). The opening I find a big blue '? ', with 2 solid lines from my computers to the "?", with the word "Unknown"under the present'?", then 2 solid lines go to the router... It's a wireless network must therefore a double line broken and not solid and obviously not '? I can fix this problem by changing the Properties tab 'Advanced' from the WiFi transceiver on each of the computers. Once I click OK, the computer the fact thing... and the blue "?" disappears and the network is 100% functional. Putting computers into sleep or restart... and I have the '? ' on the respective computer which itself was removed from the network after a reboot. This happens on 4 computers on the network, all the Windows 7 64-bit, 2 notebooks, desktop computer 2!... Still problem, all corrected in the same way. Until the '? ' is corrected I show other computers in our network at the bottom of the window under the label:-"the following peripheral discovered may not be placed in the plan.» Click here, etc. etc. Once all 4 computers are patched, I show a perfectly displayed network... I'm open to any ideas... Thank you

  The question mark appears when you return from sleep if interconnect them (Network Interface Controller) is allowed to turn off to save power.
  This can be disabled if you wish

• While error blue screen that clicked on the network and sharing Center icon

  whenever I click on network and sharing Center icon I got blue screen error and restarted p.

  Here are the event logs and sys inf.

  http://1drv.Ms/1tq4Y9M

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 00000005
  BCP2: 8530801C
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  SG

  There is evidence that this is caused by malicious software.  I would like to launch malwarbytes to eliminate this possibility

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

  If this comes back clean then it is related to the material, and because the DMP files mention Genuine Intel I ran the cpu stress test first.

  Try this free stress test: http://www.mersenne.org/freesoft/

  Prime95 Setup program;
  -Extract the contents of the zip file into a directory of your choice
  -Double-click on the executable file
  -Select "all stress testing.
  -Select the test of 'Blend '.  If you have already run MemTest overnight, you can run the test of "Small FFFS" instead.
  "Number of threads of torture test run" must equal the number of processors multiplied by 2 (if you use hyperthreading).
  The best way to do this is to go to the Manager of the tasks of the figure... The performance tab - and see the number of boxes that appear under the CPU usage history
  Then run the test of 6 to 24 hours - or until you get errors [b](whichever comes first)
  The selection of Test and the file stress.txt box describes the components that insists on the program.

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).

  
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

  
  
  More advanced reading can be found here from a MS MVP IT PRO
  http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/

• How to activate the Internet connection on the network and sharing Center.

  

  I clicked on disable when I opened it. I tried to find a solution to this, but I can't find anywhere on the web. Please, help me difficulty find my internet connection. I'd really appreciate it. It's windows 7.

  OT: I accidentally disabled the internet connection by going to network and sharing Center

  Thank you.

  Hello
  I suggest you to run the network troubleshooter utility.

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also the link: wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Post us the results after trying the steps above.

• Impossible to change the network location of the public in the network and sharing Center.

  I'm unable to change the network location of the public to the private sector or at home. In network and sharing Center, he is listed as unidentified network, and under "Public network" is written in black and is not clickable.

  I have a connection high speed (USB connected) also listed above under "Home network", it is written in blue and is clickable.

  The affected connection is an XBOX 360 connected via a network cable. I wish to connect the XBOX to the Internet via ICS, but cannot do so until this connection is either private or at home.

  Things I've tried so far;

  Reinstall the drivers,

  disconnect and reconnect, turning on all the elements concerned.

  All ideas,

  Tourist shifty.

  Enable ICS on the connection Strip and not on the XBOX 360 connection.  When you do this, the connection of the XBOX 360 will still be confused with a public network, but everything should work. Boulder computer Maven
  Most Microsoft Valuable Professional

• I'm trying to set up an Ad Hoc network, but there is no option for the Ad Hoc network configuration when I go into the network and sharing Center.

  I looked at how to make a point of my computer because I have a usb wireless internet device for my laptop and I tried to get an ad hoc network setup but there is NO option for the CONFIGURATION of the NETWORK AD HOC when I go to network and sharing Center... what should I do?

  original title: ad hoc isn't here...

  Hi NickBean2,

  You can refer to the following articles and see if it helps.

  Set up a computer-to-computer (ad hoc) network
  Solve problems, find wireless networks

  Hope this information is useful.

• Win 7: Wifi connection appears on the taskbar (notification of wifi icon) but not in the "network and sharing Center."

  Win7: Running "netsh wlan show network" will list it but I can't export its profile by name. I get an error "profile is not found." The command even on other profiles correctly exports in xml format. It has a hyphen in the name, it is of any consequence. It is a * open * guest account that I created and which should be deleted. How can I remove it? TIA.

  Hello

  Please see the link:

  http://TechNet.Microsoft.com/en-us/library/cc755301 (v = ws.10) .aspx

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro