Virtualization on a HP 6000 Pro desktop

Similar Questions

• HP Compaq 6000 PRO SFF: Need some drivers for this desktop computer

  Hello, I have a model # HP Compaq Desktop 6000 PRO SFF and I need drivers for it the following:

  PCI serial port

  PCI Simple Communications controller

  Trusted Platform Module 1.2

  Someone please help... Thank you

  You are the very welcome.

  You need this driver.  Install manually if auto installation does not work.

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://FTP.HP.com/pub/SoftPaq/sp45001-45500/sp45367 .exe

• HP Compaq 6000 Pro SFF: HP Compaq 6000 Pro Compact (SFF) - memory upgrade problems

  < <! UPGRADE MEMORY SHOULDN'T BE COMPLICATED! > >

  Chassis: HP Compaq 6000 Pro Compact

  Processor: Intel Core 2 Duo @3. 00 GHz

  RAM: 2 x 1 GB

  OS: Windows 7 Pro 64-bit

  I can add more technical info on request.

  Recently saved this PC of my friend tries to throw it. Everything is fine with the PC. It works perfectly and there is no material visible failure wihtin the PC either. He just bought a new and had no need for this one.

  Before turn me this into a House mutli-purpose server, I decided to upgrade the RAM.

  So I did some research and found this page: http://h10032.www1.hp.com/ctg/Manual/c01883661

  DDR3 240-pin DIMM 1333 MHz non - ECC, Max 4 GB per DIMM slot, Total Max 16 GB module.

  I went and bought RAM Corsair. Link to the product: http://www.corsair.com/en-us/cmv4gx3m1a1333c9

  I decided to get 2x4gb and upgrade later if I felt the need.

  I was happy to install in the PC. one in DIMM 1 slot and the other in the DIMM 2 slot.

  BEEP BEEP BEEP BEEP BEEP!

  I thought that maybe the slots are wrong, maybe they have to odd numbers then numbers.

  So I changed the RAM of DIMM 2 DIMM 3.

  Once again, the annoying ringtone.

  I even tried leaving just the 4 GB DIMM 1 and tried to start the PC, but nothing helped.

  I tried a lot of different combinations with the end result is 5 annoying beeps.

  After that I thought that maybe, just maybe, an update of the BIOS can change things.

  So I installed Windows 7 (I can't stand Windows. Arch Linux FTW) and performing a BIOS update.

  I then installed the new RAM again. Yes... frickin 5 beeps AGAIN.

  I am extremely disappointed at this point. I spent already $ 70 on a computer with free access.

  I read the forums here, but I couldn't find a thread with a solution for me.

  Is there anyone on this forum who could lend me a helping hand?

  Any information would be gladly appreciated.

  PS Please report any stupid error, I did. Stick and stones could not curb my bones.

  Hello:

  See this related post... the elite 8000 is basically the same model as the Pro 6000.

  Resources memory very finnicky needs...

  http://h30434.www3.HP.com/T5/desktop-hardware/memory-upgrade-for-8100-elite-CMT-with-TwinMOS-2x4GB-512x8/m-p/4918937/highlight/true#M95301

• HP Compaq 6000 Pro AT492AV: Serial Port PCI Driver help - HP 6000 AT492AV Windows XP Pro

  Due to former software compatibility issues, I run Win XP on my computer HP Compaq 6000 Pro AT492AV.  I installed a new copy of XP OEM and have solved all driver except for 2 problems:

  (1) PCI Serial Port, here's the info from Device Manager:

  PCI serial port

  PCI bus 0, device 3, function 3

  PCI\VEN_8086 & DEV_2E17 & SUBSYS_3048103C & REV_03
  PCI\VEN_8086 & DEV_2E17 & SUBSYS_3048103C
  PCI\VEN_8086 & DEV_2E17 & CC_070002
  PCI\VEN_8086 & DEV_2E17 & CC_0700

  (2) unknown Device, here's the info from Device Manager:

  Controller of Interface LPC Intel(r) ICH10D - 3A1A

  ACPI\IFX0102
  * IFX0102

  I'd appreciate any help you can provide!

  All the best

  Hello:

  You need these drivers for devices...

  1.

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45367.exe

  2.

  This package provides the device driver for the Infineon Trusted Platform
  Module (TPM 1.2) in office supported running models taken Microsoft support
  Windows XP operating system.
  
  FTP://ftp.HP.com/pub/SoftPaq/sp40501-41000/sp40553.exe

• missing PCI Simple Communications controller for HP Compaq 6000 Pro SFF PC

  HY, I installed windows 7 on my Hp compaq 6000 pro.but simple Communications controller PCI is not found. I searched a lot and tried a lot of drivers.but this problem is not fixed

  Here's my hardware ID

  PCI\VEN_8086 & DEV_2E14 & SUBSYS_3048103C & REV_03
  PCI\VEN_8086 & DEV_2E14 & SUBSYS_3048103C
  PCI\VEN_8086 & DEV_2E14 & CC_078000
  PCI\VEN_8086 & DEV_2E14 & CC_0780

  Hello:

  You need this driver...

  This package contains the device driver Intel Active Client Manager Host Embedded Controller Interface (HECI) for desktop models and operating systems supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45411.exe

• Hewlett - Packard HP Compaq 6000 Pro MT PC memory problems

  I have a few Hewlett-Packard Compaq 6000 Pro MT of the HP PC I want to make a memory upgarde. At the moment the memory installed on each of them is 2 GB Micron 8JTF25664AZ-1G4D1 - 2 GB DDR3 - 1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz). I bought 2 different brands with the same specification that Corsair XMS3 4 GB 1x4Go memory SDRAM Desktop DDR3 1333 Mhz DIMM 240-pin CL9 and Kingston HyperX Blu 4 GB of RAM DDR3 1333 MHz DIMM 240 pin CL9 memory generic. When mounting this new memory I get the error message sound for faulty memory. Memory have been tested on the brand of the other computer and it works fine.

  Can someone tell me what I will do in this case? I updated the BIOS as well, but still no change.

  Kind regards

  Patrick

  I not really much information but what I have found, here's a thread @Tom in the same direction as your ad material .  It shows the same symptoms as published at the end.  This person has used BLS2KIT4G3D1609DS1S00, which is the FOLLOWING.  Found on AMAZONandEWEGGN.  Also to MICROCENTER.

  Motherboards are picky when using RAM, so use what is known to work.

• AIO HP 6000 Pro: hard drive HP 6000 AIO Upgrade questions

  I have a HP 6000 Pro AIO, which works fine, but I would like to put a hard drive more in for right now, I have a 250 GB drive.  I have a WD Black 1 TB disk into the machine, but it will not recognize the drive even after that the drive is cloned.  He tells me that readers may not be found.  When I check the disc, it displays the data that I cloned it.  Is their missing something I'm trying to migrate to the new drive?  Also, I tried to do a fresh install of the operating system.

  Hello:

  Your PC can suffer from this problem if you installed a hard drive sata III...

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3718645 & docid = emr_na-c02711513 & lang = to & CC = US

  I had a similar problem with my dc7800 CMT.

  I bought a WD Caviar Black 1 TB SATA III hard drive.  I managed to install the operating system, but when I want to start or restart the PC, most of the time (95%), I got the boot drive not found error.

  I assumed the reader was bad, so I RMA. by it, and the spare drive did the same thing.

  I have a HP 8200 CMT of Elite, which came with a Seagate 1 TB SATA III hard drive.

  For fun, I put this in my dc7800, and it worked very well.  He worked in this machine for over 3 years now without a hitch.

  I put the WD hard drive in my 8200 Elite and it has worked well in this PC, because there a sata III drive controller.

  None of our PC are shown in this document support, but the symptoms are the same.

• HP Compaq 6000 Pro SFF: Help change the chassis.

  Nice day.

  I have a HP Compaq 6000 Pro SFF PC, I want to upgrade in a mini tower, is it possible with this PC? The reason is because I want to install a new GFX card and a cooling system for best performance, however, @ 240 PSU will be not reduced, especially not when I already 2 SATA drives. Can someone tell me please on what to do? Thanks in advance.

  PS: My PC is already out of warranty 3 months ago. If I can do pretty much anything I want with it without breach of the warranty.

  Specifications of the PC:

  HP Compaq 6000 Pro SFF

  Intel Core 2 Duo E7500 2.93 Ghz

  1 x DDR3 2 G of Ram

  2 x SATA hard drives

  1 x DVD player

  Windows 7 SP1 (32-bit)

  1 x PCI-E slot? (I do not currently know what type of housing is)

  POWER SUPPLY 240

  The motherboard so that the PC is listed as a BTX.  The typical motherboard is ATX.  HERE IS a PAGE that gives information of the two styles differences.  What I see, the BTX is built around designs of air traffic, so be careful.

• HP Compaq 6000 Pro MT: PCI Simple Communications controller problem

  Hello.

  Recently I bought HP compaq 6000 Pro format microtour to used market. Today I bought the TP Link wireless network PCI card. I installed the drivers but it did not work. I noticed that I have not the PCI Simple Communications controller installed drivers. I searched on Google but could not find the drivers. So I decided to come here to ask.

  Can you please link me to the controller drivers PCI of communication Simple?
  
  I am running Windows 7 Professional 64 - bit OS on my PC.

  Hope I get some answers as soon as possible.

  Thank you.

  PS: Sorry if I didn't post it in the appropriate section. I have no idea

  Hello:

  You need the driver for this device.  This should have no impact on the wireless adapter, you have bought does not.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4023815 & swItemId = vc_75040_2 & swEnvOid = 4059

• HP COMPAQ 6000 PRO format MICROTOUR: busco una change bios del PARA MI PC

  I HAVE A PC HP COMPAQ 6000 PRO FORMAT MICROTOUR SERIAL NUMBER 2UA01622NL SOLO QUIERO ADDITION DEL BIOS POEQUE NO. ABRE UNA COMPUTADORA PARA CONFIGURARLA GRACIAS.

  Thank you for visiting our English HP Support Forum. We are only able to respond to messages written in English. To ensure a fast response, it would be desirable to ask your question in English. The following links are here to help you if you want to post the following language Forum.

  German: HP Kundenforum
  
  Spanish: Foro of HP users
  
  French: Forum users
  
  Portuguese: Forum back HP users
  
  Chinese: 惠普个人客户支持论坛
  
  Korean: HP 지식커뮤니티

  Thanks for your understanding

• 6000 pro SFF: installing the video card on 6000 Pro SFF with BIOS 2.03

  I am in train to install a video card in my 6000 Pro SFF and find that when the new video card is inserted, neither she, nor my tip on video card working.

  Assuming that their must be a way to get the card to operate in the BIOS (2 786 v2.03), I'm going to the "Advanced" tab and find "PCI devices. Underside of the mentioned deviced is 'Controller VGA Intel'. Choice for this controller are the IRQ = 5, 10, 11, or disabled. Apparently, the default value is 5 because that's how it is now set.

  A little scared that if I put "Disabled", which will be not only the new video card does not work, but the video card on the motherboard won't work, too.

  Y at - it anyone out there that can tell me if you change the VGA Intel controller to disabled is the right way to install the new card, and that I only put my computer in a heavy paperweight by.

  You are welcome.  Thank you for the additional information.

  I don't think you have to do anything in the BIOS.  At least, I wouldn't do anything, until you have improved the PSU to see what is happening.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Compaq 6000 pro: hdmi graphics card

  Work of XFX AMD Radeon HD 5450 graphics in my little Compaq 6000 pro cards form factor pc?

  Hello:

  It should be, but you would be better off installing the HD 6450 that draws less power.

  The HD 5450 attracts approximately 38 Watts, and the HD 6450 attracts about 27 watts.

• HP Compaq 6000 Pro AIO: PCI Serial Port driver for HP Compaq 6000 Pro

  Hello world

  I could get help to find driver serial port PCI for HP Compaq 6000 Pro all in one workstation. It has 8.1 Windows x 64 installed. The hardware IDS are

  PCI\VEN_8086 & DEV_2E17 & SUBSYS_1489103C & REV_03
  PCI\VEN_8086 & DEV_2E17 & SUBSYS_1489103C
  PCI\VEN_8086 & DEV_2E17 & CC_070002
  PCI\VEN_8086 & DEV_2E17 & CC_0700

  Thank you

  Vignesh

  Hello:

  You need this driver... Install manually if auto installation does not work.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4210069&swItemId=vc_85050_1&swEnvOid=4059

  You can see on the partial copy and paste installation information file driver that the ID you have posted is supported by this driver.

  ; Drivers
  ;----------------------------------------------------------
  [Manufacturer]
  Intel % = Intel, NTamd64

  [Intel.NTamd64]
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_2E07 & CC_0700"
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_2E17 & CC_0700"
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_2E27 & CC_0700"
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_2E37 & CC_0700"
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_2E97 & CC_0700"

• Slow down the WIN XP Pro desktop icons

  Hello

  For some time, when I turn on my Windows XP Pro desktop computer, all icons appear on the desktop in their generic form (squares with dots of color on the inside).

  Then, one by one, the icons change very slowly, to their shape.

  No idea how to solve this problem?

  Thank you, Joseph.

  The icons that appear on your desktop are removed from the Cache icon.  It is possible that your icon cache is fragmented or does any resulting all icons must be fired from their original location (which takes much more time).  You can try to reset/rebuild your icon Cache.  It is not hard to do, and to do this, the instructions are in this article:

  '' The icons randomly change to different icons. ''

  <>http://support.Microsoft.com/kb/132668 >

  HTH,

  JW

• PCI Serial Port driver for 6000 Pro - &gt; Windows Pro 8.1

  Hello!

  Any chance to solve the missing driver?

  Thks

  Hello:

  I have a HP 8000 Elite (which is similar to the 6000 Pro) as my PC Backup.  I've just pulled up and I see that the hardware ID's for devices are aligned with those of the pilot I posted.

  So, you will need to manually install the driver I posted first you said did not work in Windows 7.

  Here is how to do this.

  Download and run the file (sp45367) again.  Conclusion of any windows error.

  Now, implying that you have installed W8.1 64-bit.

  Go to Device Manager and click on the device serial Port PCI needing drivers.

  Click the driver tab.

  Click on set to update driver.

  Select Browse my computer for driver and then software method at the bottom of this window, select Let me pick from a list of drivers for devices on my computer.

  Select disk, and then navigate to: C:\SWSetup\sp45367\SOLinf\mesrle, and then select the administration technology Active Intel (r) - device of GROUND in the list and the driver should install.

  The hardware ID for my 8000 Elite PCI Serial Port is PCI VEN_8086 & DEV_2E17, and who should be the same as yours.

  If you have installed 32-bit Pro W8.1 find the mesrl file instead.