Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!
Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!
Hi ipitedafoo,
You can check if this article helps.
Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
See also:
Error message "STOP 0x0000007B" when you restart your Windows XP-based computer
Tags: Windows
Similar Questions
-
so I used Spybot S & D to get rid of a virus on my computer that I thought was spyware. (basically what made the virus was redirect all my research on google for websites ad). After what's happened, he said I had to reboot my computer so I don't, Spybot run and then asked me a bunch of changes and whether to 'allow' or 'ignore' or 'refuse the change. I don't know if this has caused, but I clicked on 'allow' or 'deny change' for many of them, and then neither firefox nor IE would work because both would be would break whenever I tried to use them.
so to remedy THIS problem, I tried to use "System Restore" last week when my laptop was working fine, but the system restore everything screwed up my worst computer. Now XP will not boot even upward, and I get a blue screen with the error "STOP: 0x00000007E (0 x 0000005, 0 xC0000001, 0xF7AA13D4, 0xF7AA1D0) ' and its a cycle with no end of restarting but XP never works.
I tried the safe mode, last good configuration, all these options, known and none got XP to start.
I am so lost on what to do, can anyone help me?
Thanks for all your comments
rdjfdhar,
Thanks for posting on the Microsoft answers Forum. If you can try to boot mode safe mode with command prompt, and then run the following commands.Chkdsk /r
http://support.Microsoft.com/kb/315265
sfc/scannow
http://support.Microsoft.com/kb/310747
If you cannot start mode safe mode with command prompt, then you need to boot from your XP CD recovery console and run these commands. Post back with the results.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
original title: file system
Finally, I tried to install a new xp on my pc, I had to remove some unwanted parttions and trying so I deleted some system files and its caused me
problems with my laptop will not start again.
I try to boot from a cd, but it keep posting so tat files cannot be copied. to restart and boot from the system itself is not also possible.
I got a copy of my xp on a USB but I can't get my laptop to boot from it
I need help badly thanks
pc files cannot copy
Cannot copy the Office
Win87.em
Win_dos-chm
Windows.hlp
WinHelp.exe
WinHelp.hlp
wininstP.chm
WMIC.chm
wmifltrlW.chm
wmiscmgr.dll
windW.chm etc.
Sonyvaio11, xp professional
Hello
not all motherboards were Boot from USB active
Make sure to set the ot of CD/DVD drive USB key to be 1st in the boot order to boot from the XP disc
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
How to clean install XP
http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm
___________________________________________________________
Here is the vista forums
Try the forums xp on the link below
http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4
Answers by topic
- Office & Customization
- Files, folders, & search
- Game
- Hardware drivers &
- Install, upgrade, and activate
- Internet Explorer
- Music & Sound
- Networking, mail, electronic, & updated online
- Maintenance & performance
- Photos & Video
- Programs
- Security, privacy, and user accounts
- System repair & recovery
- TV and movies on Windows
- Windows Update
-
I have an old computer that I was not really to help and now I would use it for my son for doing homework, typing and some internet research. I'm trying to update as much as possible. I can only turn the computer in safe mode after I installled XP SP3. Any suggestions?
How to remove Windows XP Service Pack 3 from your computer
http://support.Microsoft.com/kb/950249then
Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717How to obtain the latest Windows XP service pack
http://support.Microsoft.com/kb/322389Release notes for Windows XP Service Pack 3
http://support.Microsoft.com/kb/936929The space of hard disk required for Windows XP Service Pack 3
http://support.Microsoft.com/kb/947311 -
I tried to close some startup programs in msconfig and key to start diagnosis and now my computer don't return to normal startup,
Try this:
Start | Run | Msconfig | OK | Law tab
Select Normal startup
Click on apply and OK.
Reset.
For later use, there are methods generally better than using msconfig to prevent programs from running automatically at startup. Generally it is best to run the actual program and then enter the preferences to do this.
-
I have a BLUE screen with an error that appears right before my computer shuts down
Hello... I have the error code copied below, when the blue screen appears it is random and my laptop stops. In addition to the blue screen, I notuced he says "" Memory Dump"" downstairs. I would also like to add that this has started to happen when I started having personal problems with my username on my Vista. She became unaccessable, I have since deleted after you back up all the files on a disc... My laptop is a little over a year old, it's a HP... I hope someone can help with this, my error code is below:
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.0.6002.2.2.0.768.2
Locale ID: 1033
More information about the problem:
BCCode: a
BCP1: 0020006C
BCP2: 00000002
BCP3: 00000001
BCP4: 81E19FF9
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\Mini030710-06.dmp
C:\Users\Newest\AppData\Local\Temp\WER-102898-0.SysData.XML
C:\Users\Newest\AppData\Local\Temp\WER176.tmp.version.txt
Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
In the control panel select Problem Reports and Solutions (problem of type in)
The START searchbox), go to the history of the problem, your mistake right click and choose
Check the Solution. You can also examine the details.In administrative tools, choose the reliability and performance monitor and
Click on MonitoringTools then the reliability monitor (type of reliability in research
at startup). This list is a chart of the software installs, uninstalls, Windows
updates and crashes by date. See if your plant started to occur after
you installed or uninstalled something.Publish the dmp file (the name you get the details of the problem) a folder of
hosting site. Then we can download and analyze.It may be useful to eliminate equipment defects
Type of memory in the search box of start and choose Memory diagnosis
In a command prompt (type command in the start search box, then right-click and)
Choose run as administrator) typeCHKDSK c: /r
If you have more than one drive replace C: with the other drive letter.
Also test the memory with diagnoses of the memory (memory type in the search to start
box).You can clean boot
Troubleshooting--
..
--
"TracysLapTopsCRASHIN" wrote in message
News: 1384a8ba-b1ad-4913-86f0-6ab8c2cdc500...
> Hi... I have the error code copied below, when the blue screen appears it
> is random and my laptop stops. In addition to the blue screen, I have notuced
> he says "" Memory Dump"" downstairs. I would also like to add that this has started
> happening when I started having personal problems with my user name my
> Vista. She became unaccessable, I've since deleted after saving all
> files on a disc... My laptop is a little over a year old, it's a HP...
> Hope someone can help with this, my error code is less to:
>
> Signing of the problem:
>
> Problem event name: BlueScreen
>
> OS Version: 6.0.6002.2.2.0.768.2
>
> Locale ID: 1033
>
>
>
> More information about the problem:
>
> BCCode: a
>
> BCP1: 0020006C
>
> BCP2: 00000002
>
> BCP3: 00000001
>
> BCP4: 81E19FF9
>
> OS Version: 6_0_6002
>
> Service Pack: 2_0
>
> Product: 768_1
>
>
>
> Files helping to describe the problem:
>
> C:\Windows\Minidump\Mini030710-06.dmp
>
> C:\Users\Newest\AppData\Local\Temp\WER-102898-0.sysdata.xml
>
> C:\Users\Newest\AppData\Local\Temp\WER176.tmp.version.txt
>
>
>
> Read our privacy statement:
>
> http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
>
>
> -
Computer will not start!-boots to black screen
OK so this is what is happening I think maybe breaking it... so I she closed and he was going to shut down, but before I did I wanted to install updates, I have so been lettng but my cat hit the power cord and it turned off I tried to restart it and that I start more... as it does all the normal show the loading bit like him bar all go and bam just a black screen... Ive put in the recovery disks, but they charge that just stop on the waiting screen please and were someone at - it something that can help me or know why it broke? original title: Vcomputer does not start!
Have you changed the boot order to use disk recovery/s?
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the recovery discs are still not working, you will need to contact the manufacturer of the computer.
This isn't their recovery process, Microsoft.
See you soon.
Mick Murphy - Microsoft partner
-
Have a user who was the bluescreen with no error message when she arrives in the morning. This doesn't always happen. But when it does, it must do a hard boot of his computer. It runs XP SP3, and it is on a domain. Another user reports what is happening also, but not as often.
Yet once, it is not consistent where it happens every working day. It's maybe 1 or 2 days a week, if that. Hibernation is disabled and power options are set to never turn off.If this is not enough information, I will be happy to provide more if necessary. Any contributions to this issue would be appreciated.Thank youThis may apply . But this message does not resemble a BSOD / crash
-
I did a system restore to recover an uninstalled program and now my computer will not sleep.
I tried to fix it when you restart the computer, and that doesn't seem to work. Running out of ideas! Help, please!
Hello
See if this information helps you:
"How to restore the default power Plan settings in Vista"
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html
"How to solve a problem of Mode Vista or Windows 7 sleep"
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html
See you soon.
-
Upgrade of hardware and now Windows vista will not be loaded. Stop 0x0000007B error.
Can someone help me please. I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b. I tried the two loading normally and safe mode and I get the same thing.
Can someone help me please. I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b. I tried the two loading normally and safe mode and I get the same thing.
Hey Brian39
If you change the motherboard that you normally have to reinstall vista
your hard drive if you ever reinstalled vista contains the drivers for the old motherboard etc.
and if vista is pre-installed you can not put the motherboard unless you do so in collaboration with the computer manufacturer
If a retail license, you can change the motherboard
but you will normally always reinstall vista for reasons
Walter, the time zone traveller
-
my windows laptop 8 is not start blue screen with an error message
I have a laptop of Acer windows 8 that won't start - it has one blue screen with an error message and other options that work. I do not have a windows 8 dvd or any other device installation and I cannot restart my factory because I have files that are not backed up so they cannot be deleted. Can someone please?
Thank you for Madi responded and sorry to see that the issue still persists. I appreciate your efforts to try to resolve the problem.
Since we tried all possible solutions and you do not have a disc of Windows 8. You must contact the manufacturer of the computer. They will be able to participate in the repair of Windows.
http://us.Acer.com/AC/en/us/content/support
If you have problems with Windows in the future, get back to us. We will be happy to help you.
-
Help with my computer of dumping
I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?
If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.
-
I've updated windows and now my computer does not connect to the wireless network.
I've updated windows security updates and now my computer does not connect to the wireless network. Until then, it worked very well and even now it will connect through wired connection but not wireless.
HelloYou can follow below link that can help you to solve your problem:How to troubleshoot wireless network connections in Windows XP Service Pack 2 -
My computer turns off during an update to windows xp and now windows xp will not load.
My computer turns off during an update to windows xp and now windows xp will not load. It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options. I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive. I have the product key, but I don't know where or how repair the operating system.
Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.
-
I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop
I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop
=================================
If it is a recent issue, of what it may be worth trying
do a restore of the system at a time before everything started.See the following article:
(306084) how to restore Windows XP to a
previous state
http://support.Microsoft.com/?kbid=306084
Maybe you are looking for
-
I have a 2007 Mac laptop. He keeps asking me to update to Safari. Please help me. Thank you.
-
The installation of Sharepoint 2013 Ent on Win Svr Standard 2012 and SQL Svr Std 2012
Business SharePoint 2013 can run on standard server for MS - SQL server 2012 and 2012 Standard Windows?
-
I have Microsoft fsx loaded on my computer. And bought. the gsx addon. in order to activate the download.i necessary to get to the Manager within fsx to do this, but I can't find the addon manager.can someone help please I paid for the download and c
-
Vostro 230 and E2210 via the DVI display won't wakeup
Hello- Have a lot of new identical Vostro 230 systems with E2210 hung using DVI. They all show a weird problem - when the screen goes into sleep mode for energy savings (the sleep of the screen, not the PC, is disabled), intermittently, they wake up
-
Hey. When I try to test an app on Momentics IDE 2.1.1 it is so slow to connect to the Simulator - I try to connect five times or more before it will work. He later works (the IP address is ok) - it's the launch of problems window that shows. If the S