VISA 1073807343 errors and 1073807202
Hello everyone,
I have several issues with the VISA 5.0.3 and LabVIEW 2010 SP1, and I don't know if or how they are related, so I'll post as much information as I have here. Please excuse the super post long, just trying to be thorough.
Error BFFF009E (same as 1073807202 I think) appears to the MAX aperture as seen in attached ss1. When you try to open the VISA Interactive Control (IC), I get the message "failed to initialize the library VISA. The VISA interactive control utility will leave. "When I open any VI with a VISA resource and try to click the drop down arrow on the right to see the resources available, the arrow remains derpessed during a second, no field drop-down list is displayed, and then it returns to its original blank State. These problems all live together now, but before I could select BT VISA resources and use VISA IC, while I have always seen the error MAX.
I tried to fix VISA, as well as VISA uninstall-reinstall 5.0.3 which I believe is the most recent version. No change. I also checked that visa32.dll exists as suggested in the article below. See systeminfo.txt attached to the installed software.
http://digital.NI.com/public.nsf/allkb/1D1736BFD24A09878625742500241386
This error seems to be related to an oscilloscope Tektronix DPO 2014 I connected via USB (or maybe something to do with TekVISA?). By this I mean that if the scope was connected when my computer started, this error occurs. When the field is not connected at startup, I don't see the same problems as above. Instead, I get...
Error 1073807343 (BFFF0011) when you run a VI with a VISA resource to a serial device (see ss2), or connecting to the device in IC of VISA (see ss3). I also always see the error of BFFF009E to the MAX, but not the other problems on front. I can connect to these serial devices in hyperterminal and communicate very well here. Seems similar to the post below and also, I can't find visaconf.ini, but the solution does not apply as I LV 2010. In addition, ironically, I use VISA very well talk to the scope (whether to the MAX or LV) via USB if I connect after booting.
I use series of USB adapters made by Ultra (http://mail.ultraproducts.com/product_resources.php?cPath=35&pPath=782&productID=782 ) to go from instruments of series to my USB ports and the computer I'm unfortunately has no serial ports to be tested with, nor do I have another brand of the adapter. I know these converters can sometimes be a VISA problem, but I was certainly with it even without problem before.
They that all seem to have intermittent problems, because I have seen both before as I have developed and pushed to go to strange as things exchanging (apparently identical) USB extension cables or restart a dozen times. This issue has been driving me crazy for weeks, I am looking for help to try to solve it finally.
Thank you
Ratti
I think I got especially. Looks like it was TekVISA who got in the way, and if Visa32.dll was in the right place, it appeared (in properties > details) as the version of Tektronix, not the version of LabVIEW. After you have uninstalled all Tektronix as well as NI-VISA, he had disappeared, but no money to install or repair NI-VISA would be replaced by a version of LabVIEW Visa32.dll.
However, with the help of the article from the link below, I discovered that the repair of the installation of the driver NI-VISA DURATION is what replaces Visa32.dll, as opposed to NO-VISA just as messages of error and other links seemed to suggest.
http://digital.NI.com/public.nsf/allkb/B283196340462DFD86257633006DC799
Now all the VISA stuff works again, except of course for the scope of Tektronix. I'll keep this battle for the future. Guess I just needed to talk to myself for a while.
-Ratti
Tags: NI Hardware
Similar Questions
-
I'm upgrading our test system for Windows 7 and NI Developer Suite 2012 DS2 in Windows XP and NI Developer Suite 2008 4th quarter. I have a problem with the help of VISA to detect devices PXI of Pickering. The problem occurs with the next .NET NationalInstruments.VisaNS.ResourceManager.GetLocalManager () call. FindResources (filter). I use the filter "PXI? * INSTR.
To trouble shoot this problem I was using the VISA program FindResources.2008 c# example. I get the following error message when you apply the "PXI? * INSTR"filter. "Where not enough information or the device or resource is not present in the system. VISA-1073807343 (0xBFFF0011), ErrorResourceNotFound error code.
Looking at other markets, I infer that VISA is not find the maps. I came across the same error message when I tried to launch the "GPIB? * INSTR"filter however I determined that there was a problem with the NOR-488 driver. 2. after having repaired the driver of the FindResources.2008 program would find the GPIB instruments using the "GPIB? * INSTR"filter.
Max the Pickering cards appear in "Devices and Interfaces" and are listed as follows:
12: PCI Device 'PXI12::9:INSTR '.
15: PCI Device 'PXI13::13:INSTR '.In XP, the cards have been identified as:
PXI12::9:InStr (Pickering 40-785-522)
PXI13::13:InStr (Pickering 40-780-522)Also Max for each device, I am able to open the Panel to Test VISA.
Any ideas why the VISA is not able to detect these cards?
Thank you
I thought about it. Apparently I needed Windows 7 to install the driver for cards of Pickering. I guess the "PXI VPP / VISA drivers" supplied by Pickering Test would take care of this.
Until Windows has installed the driver of Pickering cards have been listed as a PCI device under 'other devices '. After installation, the cards have been listed under "devices PXI of NI-VISA.
MAX the card now are listed as:
12: Pickering 40-785-522 'PXI12::9:INSTR '.
15: Pickering 40-780-522 'PXI13::13:INSTR '. -
Visa timeout error-1073807339 reading
Hi all
I'm doing a command autoscale on a DSO-A4034A Agilent (Keysight) connected by ethernet.
But for some reason, I get a time-out error. When cheking to find system errors.
I have set up the session visa in 'MAX' and use the name of the session of the instrument of the call in the VI.
I founded these screws on the Agilent instrument driver. and I can do all the other stuff I have to do without errors. EMPLOYMENT INSURANCE. the installation type measures Aqusition read data and so on without error.
The error is caused by reading order just after the ": SYSTEM: ERR?" command under the request of error VI.
I have updated the firmware of the scope and upgrated 15.0.1 VISA but so far without success.
There is no problem when I turn the "climax of the performance"...
Is there someone who can give me some advice about where to look this anomaly? Any help would be gratefully recived.
/ Best regards Rasmus
Rasmus.Olesen wrote:
There is no problem when I turn the "climax of the performance"...
Crying just "timing issue." Add a little wait between ordering autoscale and error checking. It is likely that the oscilloscope does not resemble incoming orders when he assures the autoscale. If you wait for it to do the job.
-
Windows service pack 1 downloads 99.9% but still comes up with error and does not?
jktjw,
Please post with the information requested here: what to post in the Windows Update forum
Start with the troubleshooting steps and post returns with the requested info and arises from the troubleshooting.Clean boot your PC, and then run Windows Update.
Reset the Windows Update components
Perform operations of KB883825
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:
Malwarebytes Anti-Malware (Trial) 1.75.0.1300
www.Malwarebytes.orgDatabase version: v2013.04.10.14
Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
Internet Explorer 8.0.6001.18702
Ziadie Berry: BERRY-LAPTOP [Director]Protection: disabled
10/04/2013-17:44:54
MBAM-log-2013-04-10 (17-44-54) .txtScan type: quick scan
Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
Analyze the options disabled: P2P
Objects scanned: 271656
Time elapsed: 43 minute (s), 42 second (s)The process of memory detected: 0
(No malicious items detected)Modules of memory detected: 0
(No malicious items detected)The registry keys detected: 0
(No malicious items detected)The registry values detected: 0
(No malicious items detected)Registry data items detected: 0
(No malicious items detected)Files detected: 0
(No malicious items detected)Files detected: 1
C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.(end)
Malwarebytes Anti-Malware (Trial) 1.75.0.1300
www.Malwarebytes.orgDatabase version: v2013.04.10.14
Windows XP Service Pack 3 x 86 NTFS
Internet Explorer 8.0.6001.18702
Ziadie Berry: BERRY-LAPTOP [Director]Protection: enabled
10/04/2013 23:43:49
MBAM-log-2013-04-10 (23-43-49) .txtScan type: quick scan
Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
Analyze the options disabled: P2P
Objects scanned: 269636
Elapsed time: 49 minute (s), 41 second (s)The process of memory detected: 0
(No malicious items detected)Modules of memory detected: 0
(No malicious items detected)The registry keys detected: 0
(No malicious items detected)The registry values detected: 0
(No malicious items detected)Registry data items detected: 0
(No malicious items detected)Files detected: 0
(No malicious items detected)Files detected: 1
C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.(end)
I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:
Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
WinSock statusattmpting error information to validate the Winsock base providers: 2
error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
user redirection of information in support of the appealDiagnosis of network adapter
Network location detectionInfo to help home Internet connection
Identification of network adapterInfo network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
Info both Ethernet connections and wireless available, ask the user for selection
required user input action: select network connection
Info Wireless connection selected
State of the network adapterInfo network connection status: connected
HTTP, HTTPS, FTP Diagnostic
HTTP, HTTPS, FTP connectivityWARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
error could not make an HTTP connection.
error could not make an HTTPS connection.
error could not make an FTP connection.
Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.
Hello
Follow these methods.
Method 1.
Start the computer in safe mode with network and run a full scan of computer viruses.
To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.
Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
Method 2.
If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.
Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software
What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
Method 3.
You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.
How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151
Let us know if you need assistance with any windows problem. We will be happy to help you.
-
Original title: when adding a friend perspective encounters an error and needs to close.
Windows XP: I'm under Outlook Express. I also have the total package of McAfee. Recently, I tried to add a friend to spam, and whenever I try (different email sources) I get Outlook has encountered an error and needs to close. Any suggestions?
Hi KonScheffel,
Thanks for posting the question in the Microsoft Community!
According to the description, it seems that when you try to add contacts from mail spam Outlook Express closes with an error message. However, we need a few details to help you better. Please help me to answer these questions.
1. which version of Outlook Express you're using?
2 have had any changes made to the computer before the question?
3. What Service pack is installed?
I have a couple of steps that should help you to solve this problem of troubleshooting.
Method 1:
Check if you have installed the update that is mentioned in this article.
Outlook Express 6.0 stops responding or closes unexpectedly and you may receive an error message "Microsoft Outlook Express has encountered a problem and needs to close"
http://support.Microsoft.com/kb/898122
Method 2:
Try to check for the problem in safe mode:
Start Outlook in safe mode starts Outlook without add-ins, the preview pane, or toolbar customizations and could indicate a profile damaged or conflicting third-party app or snap
a. click Start.
b. click run.
c. type outlook.exe/safe.
d. click OK.
In addition, visit these links as a reference and check:
HOW to: Add and remove names in your address book in Windows XP
http://support.Microsoft.com/kb/307730
Outlook Express
http://TechNet.Microsoft.com/en-us/library/cc961077.aspx
Hope this information helps. Answer us queries windows and we will be happy to help.
-
Series parity errors, and clearing the error replacement character
I have a situation where I have to change the parity on the last byte of an outgoing message. E problem is that when I try to play, I get a parity error and the error replacement character appears in the output. I have a few extra bytes and a few bytes lost due to masking. This thread stated that visa 3.4.1 there is a configuration INI directive which would disable the error replacement character. I installed 4.4.1 and were not able to make it work properly. I'm curious to know if anyone knows if this setting without papers is always available and how to make it work.
Thank you.
Thanks to Tyler of OR helped me to determine the appropriate location to use. The entry is valid, I just used the wrong visaconf.ini file. The correct file is located in
(\All Users\Application Data\National Instruments\NIvisa.) Adding the following disable replacement of the error and give the data seen by the prot series: [ASRL-RSRC-ALIAS]
DisableErrorReplacement = 1 -
Original title: Add/Remove components error and DVD driver error
Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.
Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.
I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.
HelloCode 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123Method 1.
Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsMethod 2.
Also, try the methods listed in the section below and check.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Hi, I really need help.
My computer has been giving me problems recently.
I get a random error message: Generic Host Process for Win32 Services has encountered an error and needs to close.
My taskbar would turn gray and I cannot control the volume.
I checked the event viewer, and this is what has been shown:
Failing application svchost.exe, version 5.1.2600.5512, failed module ntdll.dll, version 5.1.2600.5755, address failure 0 x 00023845.
%
Hi E_G_G_S,
1. did you of recent changes on the computer?
2. when the taskbar turns gray?
3. have you printer connected to the computer?
Method 1
See the Microsoft articles below and try the steps mentioned them, check if it works very well.
Error messages when you start a Windows XP-based computer and then try to download Windows updates
http://support.Microsoft.com/kb/931852
Generic host process error message and a flashlight icon appear
http://support.Microsoft.com/kb/821690
Method 2
Even after following the steps above if you are unable to access volume control and taskbar gray towers I suggest you check it persists in safe mode.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
The Microsoft/Windows Update errors and updates failed.
I just had to make YET ANOTHER Destructive full restore my win Vista PC, regular and continuous errors and problems caused by who knows what and the fact that the system restore never worked once in 10 years of friggin! My PC tries to run Win' Vista (SP2) and all the new updates that are applied after SP2. I also run Norton Internet Security (fully updated). I would like to re - install Office 2007 again once more, but I'm reluctant to until I get an answer to the following problem, because whenever I have re-installed Office 2007 I get Office update errors as well. I do not yet have enough away with this recovery to even think about re - install "other apps" again. My problem is that a heck of a lot more than several updates that were 'available' over time since I bought this pc (which didn't even have SP1 on it when I bought it new), do not have more than several times. Finally, it seems that these updates failed stop appearing as 'available '. Currently failed updates are: IMPORTANT: KB974468; KB2729449; KB2742595; RECOMMENDED: Windows Live Essentails 2001. OPTIONAL: Bing Office 1.3.1. also failed (the current version is 1.3.3...).
My concern about all these multiple failed updates is that if these updates ARE important, whereas they should, and at the very least, not failed to install the first time which must be installed with success the next time. There are at least 40 + other these updates on my pc (of all types) who failed the first time, but succeeded (according to Windows Update), the second time. After doing a search and try to install these updates above manually from the Microsoft Download Center, I got a response that these updates "are not" or "are blocked by another condition on my computer. What 'State' is probably I wonder? Makes me think anyone or whatever decide an update IS important for a particular system is wrong either (and the update is NOT important at all) and so it does not yet appear in the list of "update available", or it IS important and there is another unknown or error "NO that does NOT exist. preventing the update to be applied. I say no because maybe this unknown error also cites a number of error that is not found by the completely useless online "windows help and support!
If an update is NOT or is no LONGER available, then why hell is he always recommended! ??? In all cases, "Windows Live Essentials 2011" settles, and looking for 'help' by selecting "get help with this error" I am taken to the "windows help and support" line (which doesn't help at all). That's because this 'aid' shows only 26 'results' and NONE of them include error numbers (800706... and two instances of 66A) city. ANY help will be VERY much appreciated (epecially on the part of MVP, who have been a great help in the past) cordially Andy Bob :) :) :) :)
Let's start from the beginning.
Lets first see what happened with your drive.
Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).change c:\bootex.logWhat is this file exist with something in it?The following commands query the event logs.To start verification by using the name of the source for any version of Windows (because it varies).WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "Autocheck" or sourcename = 'Winlogon' or sourcename = "WinInit") get format:HFormTo run chkdsk in Windows.WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "Chkdsk") to / format: HFormFor warnings about disk problems detected during normal operations and automatic repairs by Windows at the time where the problems were discovered.WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "NTFS" or Sourcename = 'Disc') to / format: HFormThen to view the created file.Start "" "% userprofile%\desktop\DiskEvents.html"Copy and paste it here. Again run the commands again after doing the below.
Then to test the equipment.
Standard hardware troubleshootingFirst to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.
Diagnosis of memoryIf you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.S.M.A.R.TStart - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason ListIf it is on will be true, otherwise on enable in the BIOS of the computer.Predict the failure must be False if everything is ok.In Vista and later if SMART failure predicted Windows prompts the user to run the backup.Run chkdskIn computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.SFCCheck the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).sfc/scannowHeatHeat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.For memory diagnostic resultsClick on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-resultsDouble-click the entry for more details on this entry.
For results of ChkdskYou can ignore this if you performed the first series of commands again.Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.Look for EventID is 7 and Source disk
Look for EventID is 11 and the Source disk
Look for EventID is 50 , and the Source is disk
Look for EventID is 51 and Source disk
Look for EventID is 52 and Source disk
Look for EventID 55 and Source is NTFS
Look for EventID is 130 and Source is NTFS
Look for EventID is 134 and Source is NTFS
Look for EventID is 137 and Source is NTFS
Look for EventID 1001 and Source is Autochk
Look for EventID 1001 and Source is Winlogon
Look for EventID 1001 and Source is WinInit
Look for EventID 1001 and Source is Chkdsk
Look for EventID is 26212 and Source is ChkdskLook for EventID 26213 and Source is Chkdsk
Look for EventID 26214 and Source is ChkdskDouble-click the entry for more details on this entry.PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.If the results are transferred to the startup time events logs chkdsk, then the results are probably in the following file c:\Bootex.log. This file is removed when the results are placed in the event logs.For the results of the SFCStart - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "It will be able to see which files are corrupted.To see if therefindstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|moreThere are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.You say that you have had continuous problems. But if you want to jump the gun to fire a bit.More details about the error
To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.Start an command prompt (Start - All Programs - Accessories - command prompt) and typenet helpmsg 2and it will sayThe system cannot find the specified file.Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.Windows errors (smallish numbers) and COM HRESULT values (in general, but with exceptions, start with an 8 as 0 x 80040154) are defined in WinError.h, except 8007nnnn where you are looking for the error Window number it contains.As a general rule, Windows errors are less than 65 535 (0xFFFF). Errors from 0 x 80000001 are HResults Component Object Model (COM). Errors from 0 xC0000001 NTStatus results.NTStatus errors (usually, but not always to start with a C as 0xC0000022) are defined in NTStatus.h.the .h files are the best source because it includes the symbolic name of the error that can give clues such as the source of the errorYou get these files by downloading the kit of Development Platform (that's gigabytes)If you just want the two files I have them on my skydrive so I can reference anywhere I want.Run Microsoft Fixit
Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems
http://support.Microsoft.com/mats/windows_update/en-us
For the visit of the list the most comprehensive
http://support.Microsoft.com/FixIt/en-us
When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.
Which helps with Windows Update.
The system update tool
Also run the system update readiness tool
For 32-bit Windows
http://www.Microsoft.com/en-US/Download/details.aspx?ID=504
For 64-bit Windows
http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540
To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).
Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log
Repair and defragment the database
Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).Esentutl.exe /p c:\Windows\SoftwareDistribution\DataStore\DataStore.edb
Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb
Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.
Clean boot
Click Start - all programs - Accessories - run and typemsconfig
Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.
Tip clean bootIf the above does not help.
Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.
Reset. If this resolves your wake problem half of the items until you find the one that.
Safe mode
If the above does not help. Windows Update does not work in safe mode.
Use safe mode with Networking if you need internet access.
Click Start - all programs - Accessories - run and typemsconfig
Go to the Startup tab, and then click Start secure (also check network if necessary). Reset. Come back here and uncheck the box secure start to return to normal mode.orIf your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support]Determine the Version of Windows Installer
Windows Vista comes with version 4. Version 4.5 is available for download. To determine the version,
Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
msiexec
If you have Version 4.5 try reinstalling from
http://www.Microsoft.com/en-AU/Download/details.aspx?ID=8483
If you have Version 4 continue with the other steps below.
Reregister Windows install
That you re-register Windows Installer.
Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type
regsvr32 c:\Windows\System32\msi.dll
regsvr32 c:\Windows\System32\msihnd.dll
regsvr32 c:\Windows\System32\msimtf.dll
regsvr32 c:\Windows\System32\msisip.dllmsiexec/reg
FixIt
Microsoft has a range of automatic programs to solve common problems. To see Windows Installer problems
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us
For the visit of the list the most comprehensive
http://support.Microsoft.com/FixIt/en-us
When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.
Reinstall the Services registry entries
Download MsiServer_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the MsiServer_Vista_32.reg.ResetRestart the Service and dependent services
Click Start - All Programs - Accessories - right on command prompt and choose run as administrator.SC start DCOMLaunchSC start RpcSsStart msiserver sc config = requestSC start msiserver.
-- -
Queue displays error and nothing does not print on HP LaserJet 2100 M PCL6 on Windows Vista - 64 bit
Original title: setting up a printer HP LaserJet 2100 M PCL6 on Windows Vista - 64
I'm having trouble installing my printer HP LaserJet 2100 M. When I connect the cable USB Windows Vista responds with complete installation... However, when I try to print queue displays error and nothing prints. I don't get an error code. Can you please help... Thank you
Hi onelittlekat,
1. do you receive any error messages?
You can try to uninstall the device drivers from programs and features and Device Manager and check the box to remove the drivers for this software and go ahead.
Step 1:
Uninstall the drivers for printer from programs and features
a. click on start
b. type appwiz.cpl in the start search
c. find all the driver printer package, right-click on it and select uninstall.
Step 2:
Uninstall the drivers from Device Manager.
a. click on start
b. type devmgmt.msc in search, and then press enter
c. in find Manager device for the device, right-click on it and select the option uninstall.
After you have uninstalled the driver, download and install the drivers from the link below and see if it works fine or not.
For HP LaserJet 2100 M PCL6 driver, see the link
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
What is "agile basic error" and why I can't get rid of?
I tried to place an order with the company of Melitta coffee. Everything is going well until I hit the "place an order" and then comes back the gibberish "agile basic error" and I cannot cross it, get rid of it, and I am never able to place my order.
This is an error with the server of the Web site. Please contact website assistance.
-
Workspace has encountered an error and needs to close
I encounter the error after scanning an image.
Workspace has encountered an error and needs to close.
To restart the workspace, press the Home button or run the workspace in the Windows start screen
Cause of the problem was Sprout Workspace upgrade SP72555 - V 1.4.43.Ap1.
Tried to uninstall and install twice to check it out.
Workspace working now without the upgrade.
-
Tecra R10 - 10W - CMOS battery error and the next mistake of bios password
I have some old Tecra R10 - 10W
Aftert long in the cupboard, it says CMOS battery error and after charging I can't start on the old password (bios) system.
How to reset the password of the bios and is also required for cmos battery and I can do it myself?
I thank...
You can change battery cmos your np for bios pasword use google auto, I hand a mini hp with the same problem and initiated a program that has been reset using error code when it is inserted the wrong password 3 times into the line, then I used the error code in the program and got the password restarted hp and password inserted now is job bp. Do I have also an old tecra and difrend problem with it, everything in good standing sims but used laptop start first ferry, after several restarsts shovs splash screen, then runing bp, restarted again, same story, it restarts several and then is runing again, leading with outside the same monitor thing, ideas?
Here is the link for your problem and sulution: http://dogber1.blogspot.com/2009/05/table-of-reverse-engineered-bios.html -
HP ProBook b 6540 - XP - software errors and drivers
Product number: WH431PA #ABG
Model: Probook 6540 b.OS: Windows XP Pro SP3 (restored Win 7)
Error: DotNetInstaller has encountered an error and needs to close.
Description:
After the installation of windows xp (I've restored Win 7), I have installed the drivers/software from the supplied DVD.
When I try to open certain files, it does not work and I get a similar as error: error: DotNetInstaller has encountered an error and needs to close.
I have updated BIOS ut still produce it.
Someone doing the same?
ME-SERVO
CherylG, you must have been sent from above.
Re-installation of operating system was going to be my next step, but you have confirmed it.
According to redo the partitions correctly with Paragon Partition Manager 10.0 free version and re - install XP with the supplied DVD and reinstall drivers provisions DVD provided the issue has been resolved.
See you soon!What I think happened was when I have crashed the Win 7 partition using the XP install process it did not correctly configured it.
There is a small free space before the partition on which I have installed and the partiton fail to mark themselves as Active. The MBR boot record must getting screwed up. He also scored this partition as number 5 for example: Partition 5 (do not know if it was the cause of many) but after I erase all partitions and repair installation of MBR disks worked.
Advice to others when go back to Win XP:
When you roll back to XP using a 3rd party Partition Manager (preferably last one coz old onse do not work)
Erase the entire hard drive including the HP_RECOVERY and HP_TOOLS partitions and create the partitions you need.
I used the free version of Paragon Partition Manager 10.0.
Maybe you are looking for
-
RAZR: It will sell in Russia?
Respected brand, and members of the forum, I want to ask: Will sell Motorola Razr & other product of the motorcycle in Russia? FANK you for your cooperation and understending,. MotoFan
-
DV6 - 6153cl drivers for biometric devices missing after system restore
Hello I have a HP Pavilion dv6 - 6153cl Entertainment PC with Windows 7. I used the fingerprint reader, since I have my laptop. The scanner has stopped working. Background: two weeks ago, I downloaded the latest version of Norton 360 (Version 21.1.1.
-
Why LabVIEW 2012 does not support USB-6009?
Hi all I recently installed LabVIEW 2012 and DAQmx 9.6 (and also tried with latest version) in my PC with Windows 7. I have the version of Explorer 5.4 measure and automation. I'm working with hardware DAQ USB 6009. Everything seems compatible, but w
-
Microsoft Corporation Lottery promotion,
Hi dear, I got the following email Is this true? so thank you Microsoft Corporation Lottery promotion,The customer service.Your winner of the lot no.: HLS/LTY/2901Your victory reference: Lb/029/2910 NOTIFICATION OF THE OFFICIAL WINNER. We are pleased
-
I often download 20 or if another company system files and save them in the same folder on my hard drive. Is there a way to "fix" the destination for files or documents folder when I download?