visa usb communication in bulk - several end points

Similar Questions

• Creation of several end points

  As a user of Captivate for quite long, I am really puzzled thread on something that is probably easy. Normally, I create linear kinds of sims in Captivate and use other tools when I need branching. However, with my purchase of 2 CAP, I couldn't wait to use it for my needs of ramifications. However, I can't understand how to create a slide that is not related to the rest of the project in a linear way.
  
  In the demo for connection included with A2, it shows several paths that a correct from incorrect action can take. It also shows the specific paths that leave the main "timeline" to a single slide that becomes at the end of this path. However, I can't understand how "unlink" a landslide from the rest of the timeline so that the movie stops right there. (Of course, I can do so by simply have no action on this slide, but to do that does not create the same type of Visual demo shows)
  
  In case this was not clear enough, here is more than an example. In slide 1, if I had two areas of click, I would want the A of click to take them on channel A, which has three other slides and then ends. I would like to click on B to move in the direction of B, which has only five slides more then ends. When I got to the top of the cylinder head, I can't understand how making the separate paths A and B. They are all still connected visually (and linear) and do not separate in the 'lines' that I see on the demo included with A2.
  
  Can someone point me in the right direction? Thank you very much!

  Through experimentation, I found my own solution. It seems that you can create a 'distinct' line in the Visual display of branch by the link in the slide to less than 2 slides with either a success or failure, or a back button.

  Once you do this, you now have a visually distinct 'line' that you can add slides to no impact on the rest of the "mainline".

  Yet once, do not do to actually create branching, only if you want to visually SEE the separate lines in the branching vierw as opposed to a long "line".

• How to connect 3 end points to 1 row reserved

  Is it possible to set up a group of MAX lines linking 3 end points to a single line of a matrix card 4 x 128, which was reserved for routing?

  I need to have all four rows defined as reserved for routing so I can set up all my other road groups by specifying endpoints.

  Thank you
  Jason

  Hi Jason,

  I guess you don't use OR-Switch 2.3.  To my knowledge, NI Switch Executive came out only with the following versions: 2.0, 2.0.1, 2.1, 2.1.1 3.0.

  The option you listed is not your only option, but this is the option I recommend for older versions of NI Switch Executive.  Don't forget that you can use groups of road to store the line separate to the Poles, while only a call connection is required.

  One extra option that you have is to use two NI Switch Executive devices virtual.  A virtual device a module the PXI-2532 lines reserved for routing and the other virtual device is not.  Whenever you want to connect more than one column on the same line, you may close the session to the 'reserved for routing' virtual device and log on to the other virtual device (where you connect several end of column points to the same line).  Note that you can not sessions open to two virtual devices at the same time because they try to share the same hardware.

  Upgrades to NI Switch Executive 3.0 a possibility?  There are two additional functions, you enjoy:

  • Intuitive graphical Configuration utility
  1. Point-and-click graphical configuration environment - allows rapid development of switching systems
  2. Change channel aliases in place
  3. Create complex routing groups by clicking matrix points one at a time
  • Import/export of Microsoft Excel
  1. Easily export the NI Switch Executive configuration in Microsoft Excel environment
  2. Increase the number of channels by simple text manipulation
  3. Easily import files newly edited in NI Switch Executive

  It would be great if the upgrade have been an option.  Let me know if you have any other questions!

  Chad Erickson

  Switch Product Support Engineer

  NOR - USA

• "There is no end point for the end point mapper.

  Summary of the issue
  Other issues of Windows Live family safety

  What version of Windows Live Family Safety do you use?
  Version 2011 (15.4.3538.513)
  Choose your operating system version:
  Windows 7

  Additional details
  Whenever I have try and configure the accounts of FS, I get an error that says: "there is no end point to the end point mapper.  I tried to uninstall the parental control and re - install the latest version several times and I get the same error.  I created several new accounts and tried to tie but still the same error.

  Any help?

  I had the same problem and the error you mentioned above... Has been frustrating me. After working through the questions Tech above, I discovered that it was related to basic and Windows Firewall filtering engine.

  Check if your Windows Firewall is working properly, and if you can make changes. If you get an error code when you try to change your firewall settings, which could be what it is.

  I followed this to correct the BFE and Windows Firewall it retries then parental control and he went through with NO PROBLEMS of...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-Firewall-cant-change-some-of-your-settings/514d78fb-39e9-47b1-B561-bc49cbdad904

  Hope this works for you as well...

• Vista gives the message "there is no more available end point" and does not allow me to share a folder on an external drive. Can you help me?

  Vista gives the message "there is no more available end point" and does not allow me to share a folder on an external drive.  Can you help me?

  Hello

  Thanks for posting in the Microsoft Community.

  I don't know it must be frustrating!

  Let us try these steps and see if that fixes the problem:

  (a) press Windows + R keys to open search Run

  (b) type regedit , and then click ok

  go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

  c) on the right, click it, click permissions

  (d) click on ADD and type everyone and click ok

  (e) now click on all

  (f) below, you have permissions for users, select full control and click ok

  g keys) press Windows + R to open Run Search

  (h) type services.msc , and then click ok

  (i) double-click base filtering engine service.

  (j) Make sure that the service status is started and the startup type is automatic

  (k) the procedure for the windows firewall service

  (l) click on apply and Ok.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information:

  Back up the registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Hope the helps of information. We know if you need help. We will be happy to help you.

• WiFi HP ENVY 4500 with several Access Points - same SSIS Configuration

  Hello

  We just got a HP ENVY 4500.  I have a main homenetwork with a wifi Modem/Router and an old router acting as an Access Point to the floor to extend coverage.

  Both have the same SSID and password and are set to different channels.

  My HP ENVY 4500 fails to connect when the Access Point is lit.

  It will connect with it.

  Once connected, I can turn on the PA and all is well.

  The two router an AP using WPA-PSK/WPA2-PSK encriptación

  The router (that it connects to) should have a better sgnal when both are on, so I do not understand why they need the AP to be turned off to connect.

  Any thoughts people?

  Eserim

  I think he has always had problems with several access points.  Try this, what ever AP is closest to the printer, set it to channel 1.  Then try channel 11.  Try now.

• Is it possible to get programmatically the end points of a Switch Executive road connected in LabVIEW?

  I am writing an application for plotting of curve for evaluation of ASIC devices and should link all of the pairs of pins possible to do this. I use the main switch to load in the roads, there is a specific ASIC and want to get programmatically the end points of the current road for insertion in the logging system. Is this possible?

  Thank you

  Nick

  It can be an adventure, but you can get there.

  

• Error during the initial install: there is no end point for more available from the endpoint mapper.

  Summary of the issue
  Other issues of Windows Live family safety

  What version of Windows Live Family Safety do you use?
  Version 2011 (15.4.3538.513)
  Choose your operating system version:
  Windows 7

  Additional details
  While you select "Accounts of Windows I want to monitor on this computer" it shows the loading for a long time then popus symbol with:

  Windows Live Family Saftey modal window popup:

  "There is no end point for more available from the endpoint mapper."

  800706 9 error code

  Any ideas?

  I had the same problem and the error you mentioned above... Has been frustrating me. After much research I found out she was related to the basic and Windows Firewall filtering engine.

  Check if your Windows Firewall is working properly, and if you can make changes. If you get an error code when you try to change your firewall settings, which could be what it is.

  I followed this to correct the BFE and Windows Firewall it retries then parental control and he went through with NO PROBLEMS of...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-Firewall-cant-change-some-of-your-settings/514d78fb-39e9-47b1-B561-bc49cbdad904

  Hope this works for you as well...

• question on pdc's end point mapper

  I have a problem with the domain controller or when you try to replicate to the new Member serevr which is a backup domain controller it fails and says end point mapper isue? any help would be greatly appreciated?

  Thank you

  j

  Hello J,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the Forums in TechNet Windows Server.

• No sound - "either Windows Audio and Windows Audio services end Point Builder is not running."

  original title: no sound - Fix he said "either Windows Audio and Windows Audio services end Point Builder is not running."  What should do?

  When I ran Microsoft Fix it for audio, it says that it is unable to solve the problem.  The message was "two windows audio and Windows Audio end Point generator services must run for audio works correctly." At least one of these services is not running. "What should I do now?

  Content in double wire-
  "When I try to use anything related audioi on my computer (volume of the speaker, open iTunes, watch a video), a box appears that reads,"c\Windows\System32\MMDevApi.dll is not designed to run on Windows or it contains an error. " Try to install the program by using the original installation media or contact your system administrator or support software provider. "The mystery is that I have nothing to my computer to ask for that. I have not installed anything new or change the settings. It just started happening. Any advice? »

  Hello

  1. are you able to hear the sound after the error message?

  2. you have an an external sound card or internal, installed on the computer?

  Method 1:

  I suggest you to follow the steps and check.

  (a) click Start

  (b) type services.msc in the search box, and then press enter.

  (c) scroll down to Windows Audio and Windows Audio endpoint builder of Point

  (d) both should be started and set to automatic if one or both are arrested.

  (e) click the name to select it.

  (f) click on restart the service at the top left.

  (g) repeat for both if necessary. If some are not set to automatic, and then double-click the name and on the drop-down list to set the startup type to automatic and apply and ok your way out.

  Method 2:

  I suggest you to run the automated FIXIT from the link below. You can also follow the other steps and check.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 3:

  If you have a sound card, I suggest you uninstall the audio driver from the Device Manager and and then install the latest audio driver version from the sound card manufacturer's website.

  To uninstall the Device Manager sound, proceed as described in the link below.

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Find the audio driver in the list, do a right click and Uninstall.

  You can also download the drivers from the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4:

  If the steps do not help, I also suggest you to run a scan of the System File Checker .

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Hope this helps and keep us posted.

• RPC end point Mapper is missing from my computer

  How to re-install RPC end point mapper?

  Nancy

  Press the Windows key and the R key

  in the Find box type services.msc

  In the list of services find the RPC end point mapper

  It must be set to automatic and must be started if it is not started

  Start it

  If it is not set to automatic

  Highlight the RPC end Point Mapper and right click, select Properties

  Change the Startup Type to automatic

  Click on apply and OK

• An error occurred when trying to share Share_OD. There is no end point for more available from the endpoint mapper.

  I wanted a user to add a group named "OD" the client Desktop Machine and another thing is that OU is created named OD. But an error that "an error has occurred all trying to share Share_OD. There is no end point for most the endpoint mapper. »

  Hi Laurent,.

  This request is outside the scope of this forum. I suggest you to send this request in the Microsoft TechNet forum for better support.

  https://social.technet.Microsoft.com/forums/en-us/home

• An error occurred when trying to share < folder name >. There is no end point for more available from the endpoint mapper. The shared resource was not created at this time

  Original title: sharing folder error

  How to solve this error message when I am trying to share a folder: "an error has occurred when trying to share . There is no end point for more available from the endpoint mapper. The shared resource was not created at this time. »

  Hello

  Were there any changes made on the computer before the show?

  I suggest to see the link and try to run the Troubleshooter:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  See also:

  File sharing essentials

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

• There is no end point for more available from the endpoint mapper

  My wife is currently running Windows 7 Home Premium.  Trying to create a share gives the following error: "year error occurred while trying to share share name."  There is no end point for most the endpoint mapper. "It's a peer-to-peer network, the other computers running Windows 7 Professional.  No service is disabled or failing.  Any ideas? »

  This could be caused by the procedure call Locator service remote does not. See http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/error-1753-there-are-no-more-endpoints-available/de6f9381-fea6-4bee-b646-b06b81f75d19 for more information.

  I hope this helps.

• is it possible, end point of video recorded in CUCM call standalon SX10 via SIP Trunk?

  Dear all,

  Need help :)

  1.

  is it possible, end point of video recorded in CUCM call standalon SX10 via SIP Trunk?

  my customers will not buy TP - lic :)

  Topology:

  8900 (jabber) - CUCM-(SIP) - SX10

  2.

  Customer, have MCU machine.

  If not possible. is it possible, meeting point of MCU use?

  Topology:

  8900 (jabber) - CUCM - MCU - SX10

  1. Yes, but it is not that simple and straightforward that the SX10 can be reached by calling is the public IP address and CUCM does not support the IP address numbering is not a SIP address format...

  2. Yes, using the MCU would be much simpler, easier and, in my opinion, a better solution to be implemented. Here is an example of how a stand-alone SX10 could dial the IP address of the MCU standard automatic.

  You can also assign a SIP URI address to the meeting point which the SX10 can connect to.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.