vision assistant problem

Hi all

I use my Vision assistant (2015, 64 bit, build 20150612021331) for the batch of treatment on several images in the browser. Ok.

But for that matter, as he returned after the batch script to change by doubling (copy - paste) a bunch of "VIbox"... randomly.

This bug reproduces very well on another PC too.

Any hint?

Stones

This bug has been fixed in Vision Development Module 2015 SP1 (CAR 567565).

Please consider upgrading to this version.

Tags: NI Hardware

Similar Questions

  • A question about 'value spots' in the Vision Assistant of NOR

    Hello, all,.

    I am a new learner or vision.

    When I use 'mark set' in the Vision Assistant of NOR. It works well. for example

    (The image above is the example in the Vision Assistant of NOR, please see help > Assistant Solution > Inspection of dental floss)

    However, when I put the program NI Vision Assistant to create a Labview VI program. (Tools > create a LabVIEW VI), then run the VI, it no longer works.

    The result of the system of coordinates outside is always like that.

    I can't find where is the error. I tried a few other examples in the Vision Assistant of NOR. If the command "set mark" is used in the program in the Vision Assistant of NOR. then create the LabVIEW VI.

    The problem still occurs.

    I hope some man experienced in NI Vision could help me.

    Thank you.

    Hi all

    This problem has been reported under Corrective Action Request (CAR) 441410 and has since been fixed in 2014 of VDM. I highly recommend upgrading to the latest version here: www.ni.com/download/vision-development-module-2014-f1/4971/en/ because it contains other patches. If you are unable to do so, I have attached the patched file, you need to change. Replace the following file (assuming that the default installation location): \National Instruments\LabVIEW 2013\vi.lib\vision\Vision Utils.llb Assistant with the version I have attached here, and that should solve the problem you see with NaN values of reference in the VG of the generated code.

    Kind regards

    Joseph

  • How can I change the sequence of pictures, that I imported into Vision Assistant?

    Hello

    I have several issues of images I shot a framegrabber. Each has between 300-500 images .bmp are named 0, 1, 2, 3,..., 365.  The problem is that when I use Vision Assistant to open the pictures, it opens in out of use.  Ex: 1, 10, 100, 101, 102,..., 11, 110, 111,..., 12, 120, 121,...

    What is even more frustrating, is that he doesn't seem to be a way to rearrange the pictures, or I don't think I want to spend the time to do for 16 folders of images, with that I work.

    Thoughts... Ideas?

    In this case, it is best to name the images using 3 numbers and fill with zeros on the left.

    It would be pretty easy to write a quick vi who reads all the files in a directory.  For each file, it would remove the old number and replace it with three-digit version.  If the number is less than 100, it can rename the file automatically.

    I can't imagine other ways to solve your problem.

    Bruce

  • Make an adjustment in line with the Vision Assistant for a polynomial function?

    Hello

    I have the following problem: I have a laser beam which a (non-linear) line on a wall. For this line, I need to know (exactly) mathematical

    function. That's why I can get a picture of the line, but I don't know how I can extract the mathematical function with a line fit for example. If I could "convert."

    the line at points that I would use the line fit function to LabView that should work without problem.

    Is there a way to solve the problem with vision assistant or... ?

    Thanks in advance

    Hello

    after thresholding, this should work:

    False case just by...

    Best regards

    K

  • How can I add image 8-bit with 32-bit image in vision assistant

    Salvation;

    I want to match image 8 bits with a 32 bit image assistant vision. I have a research topic on my doctoral thesis on the treatment of the image and I found a picture on the internet like that but I couldn't solve this problem in vision assistant. I have attached to it. Corresponding to the original image and its State binarize on the same image. Please help me, how can I do?

    The proposed script was just erase the area of interest, replace seuillees with zeros pixel. To fill this area with a given color, a possible solution is to invert the mask, it allows to make a new image of the area of binarize, multiply by the chosen color (use a saturated color, otherwise you will get color variations) and add the result to the previous image.

    That's what made the attached script.

  • Cannot create a vision assistant.error vi: labview and imaq missing

    I installed labview and vision assistant on my computer vista laptop-run

    Whan I try to create a vision assistant vi, it shows labview and imaq lack.

    Please try this

    Thanks in advance

    I reinstalled labview and other components. Now the problem is solved

    Thanks for help

  • Vision Assistant - not found .bin

    I would try here first before raising a support of thought gives the floor just in case someone has met before.

    Current running Win7 64 bit and LV 2013 SP1 (via 2014 DS SP1), with the development of Vision system installed. I have a range of fully powered Vision and can use the low level of Vision to my heart's content...

    However, I can't run Vision Assistant. Passing it to the Vision Assistant of the palette, I get the following two errors:

    I am also unable to open instances Vision Assistant previously configured in another code, even if no error is returned - the VA just does not work.

    I also have LV 2012 SP1 installed (including older versions) and now get the same error with it. I have not tried to use GOING because I went to LV 2013 several months ago.

    Has anyone encountered this before?

    I'm just trying to Repair Wizard 2013 Vision, which I'd like to think will fix it, but we'll see it. I'll let you know when 117 all required components are also repair finished

    Solve the repair.

    Unfortunately, this involved repair of components for 2013, 2012, 2011, 2010... but still, at least, I put my feet for a little while as it ended.

    Will mark as resolved in case someone else has the same problem.

  • How can I get the Position-Cluster-Information to calibrate the output Matches Vision Assistant

    Hello

    I have a problem to get Position information (x, y) output Matches Vision Assistant calibrated. How can I extract calibrated pole position or two real-variables (x, y-position) from the output of Matches?

    I need this information for more calculations and show the position on a graphical indicator. Everything I tried faild.

    I am a Newbee LabView and I'd be happy for each answer.

    Thank you very much!

    Just change the control to a constant and it will work the same.

  • Cannot get out of Vision Assistant 2009 LabView code

    I use Labview 2009 in my laptop lenovo X 61 with Windows 7 (64-bit) is installed.

    I played a bit with Vision Assistant 2009 and results with my images are good enough. Now, I would get the same functions to work in LabView. I try to make 'tools' - 'create labview VI... '. "in the wizard of vision. All is well, to the point I should see the code. Vision Assistant opens the "Getting Started" Labview, but then nothing happens. I don't see VI in my folder specified and all stop there.

    If any of you have an idea how to solve this problem, I would be very happy.

    Tommi

    There is a known problem with the generation of code in Vision Assistant 2009. Check out this KB:

    http://digital.NI.com/public.nsf/allkb/DFB0B9C7F817D66386257626005A5825

    In addition, LabVIEW options (Tools > Options) make sure you Protocol ActiveX are activated and grant access to a VI called 'IVA create LabVIEW VI.vi' in the list of exported screws.

    -Christophe

  • Acquisition of vision create problems with webcam

    Hi, I installed a trial version of the software Vision Acquisition as well as the Vision Assistant. The problem is that after installing NIs USB plug in camera http://zone.ni.com/devzone/cda/epd/p/id/5030 it takes a photo once, but that it does not detect the camera and not only that, the camera is not detected by my laptop. I'm using LabVIEW 8.6 with Windows 7 on a Compaq Presario V3000 laptop.

    wond3rboy wrote:

    Hi, thanks for your response. Can I use Vision Acquisition 2009 with LabVIEW 8.6?

    Yes, seems you can:

    http://digital.NI.com/public.nsf/allkb/6B55FF09D1FBD3108625719600650B7C

    http://digital.NI.com/public.nsf/allkb/244E6DDF9A92A6CD8625730100629047

    Andrey.

  • Different methods to find a form of rectangle Center and rotation in vision assistant

    Hi This is my first shot at the machine vision and Vision Assistant tool. I am trying to find a rectangle shape in an image and determine its Center and rotation around the Center. I started with this image:

    and I increased saturation and contrast to make a clearer target area:

    I am interested in the main red rectangle turned about 5 degrees to the right. For me, it seems that there is enough contrast edges, but quickly, I tried some of the edge (including the rake) detection and pattern matching algorithms and I don't get any useful results. Maybe it's the white lines don't interfere. I tried to extract just the plan of the red color but as white also contains red these lines always appear.

    I'm hoping to get some ideas for different approaches get precisely the Center and the rotation of this part, as well as the guidance you need to succeed. Thanks for the tips!

    I would try to extract the rectangle using color thresholding.  Analysis of particles of use on the rectangular blob and you should be able to get a rotation value.

    Bruce

  • Vision Assistant has theAlgorithms.Resample feature

    I'm just not see it, or is there no way to resize (Resample) an image in Vision Assistant?

    It seems to me that the resizing of an image is one of the simplest function of image processing.

    I'm used to having to open images in MS Paint to resize, and then reoppen in the Vision Assistant.

    I created a VI resampling that works. But I just thought that it would be part of the core functionality.

    Yes, the function of resampling in Vision Assistant is in the first tab (processing of functions: Image). Select the step of geometry, and Resampling.

  • vision Assistant

    Hi, would you please tell me what can I do with this PIN 'Image In "? It is purple

    I tried a lot of experience, but the vision assistant insist to grab me something to this 'Image In' purple

    I tried to create the path of file (green color), I gave him the path, but it did not work without "the image in.

    I am very new to the vision, it is perhaps a trivial question, but the help file didn't help me a lot.

    Thanks for your help.

    That's what you want
    just take care about format if your need for RGB code change grayscale in RGB

  • Advancing the Straight Edge configuration in the Vision Assistant

    Hello world

    I used the function advance Straight Edge with Vision Assistant who I little understand but this is not enough for what I'm trying to achieve. I tried to find some info on the underlying theory, but the only thing I found is the help document for it, which provides details on the different variables only.

    Could you please tell me where I could find a good source of information on edge configurations right ahead?

    Thank you  

    Take a look at the NIVisionConcepts.chm you could find under ...\National Instruments\Vision\Documentation.

    Christian

  • Characteristics of vision assistant

    I was wondering if someone could tell me how to change an image´s brightness, contrast and histogram with vision assistant. I want to do this, in order to normalize the image and reduce the impact of the light on the image. I m of the system development will always illuminating, but I Don t want to get the results to change so dramatically with just a little change in illumination.

    Can someone help me please?

    Thanks in advance!

    There is a direct function under image - brightness.  You can adjust the brightness, contrast and gamma. If you want to go check dynamic table of choice

Maybe you are looking for

  • IPhone 6s can use in Malaysia

    Dear communities team, Good day to you! Please advise if I buy iphone 6s apple.com (US). Iphone works with the card SIM of Malaysia or carrier worldwide? IPhone 6s can be connected/supported by the cellular network of Malaysia and the WiFi? If I buy

  • Unexpected entered in everything: config

    While trying to remove some plugins, I discovered a few other entries in subject: config which worried me a little. Can someone give me some more information on these, why they are there and the origin of their names? Please find the 3 items below: e

  • Satellite M40X-119 does not start - 4 beeps only

    Hello.. I have Satellite M40X-119When I press the power button, the blue light comes on and the fan starts and then only 4 beeps(Beep - beep - beep - beep) intreval approximately 1 seconds. and then nothing happens! I replaced the RAM with a new one.

  • MY question is on October 22 How can I restore file "SndVol32.exe" once I have it?

    I really do this more difficult by asking a similar question to the one I asked 8 months ago. It's my fault, so I'll try again.I need to answer the question that I want or I'll get an answer to a different question. I tell my students"It's a very goo

  • . Treated AVI as Audio in Movie Maker and corrupt in Windows DVD Maker.

    I have a lot of. AVI files I want to burn to a DVD.  I do not have another series of. Notice to try with these programs to see if it's just them. Windows Movie Maker treats as Audio files, I tried to disable compatibility filters.  I tried this on tw