Vision Builder 2013 DURATION: Selection of Inspection

VBAI2013 I would like to insert a step of selection of inspection in the selection state of inspection which applies to the system on which the Vision Builder is installed and not to individual inspections. Therefore, it is not possible to how in the Version of the Runtime-license-where to add the steps?

Thanks in advance.

The steps for product status select are saved in the "Vision Builder system Config.ini' in the folder VBAI. You should be able to copy this file to the machine with the runtime version and if it has the same version of the VBAI, it should be able to apply all the steps and the INI settings.

Hope that helps,

Brad

Tags: NI Hardware

Similar Questions

  • vision builder to labview migration

    Hello

    I have a project of vision. Pluggable VISION BUILDER pour image processing and the LabVIEW pour interfacing.

    My question is: how to call an inspection done by VISION BUILDER in the LabVIEW software.

    NB: I found in the Tools menu of VISION BUILDER a feature titled "Migrating to LabVIEW. but she could not be executed because I don't own

    the DEVOLEPMENT VISION MODULE. Have to buy another software OR (VISION DEVOLEPMENT MODULE) pour fix my problem? : smileysurprised:

    Thanks in advance

    Hello

    Vision Builder is provided with an ActiveX control that you can call from LabVIEW. You will find enclosed a few Directory promotion the in examples

    \

    The ActiveX component allows to control Vision Builder as you would you interface greengrocers. Once you have created your inspection in Vision Builder, you can use the ActiveX component to connect a Vision Builder of LabVIEW, open an inspection, execute, recover and display the image (you need not purchase the Vision Development Module pour it), and get the results of inspection and each step of the inspection.

    Hoping that this answer has your expectation

    Kind regards.

    Christophe

    OR R & D Vision

  • Vision Builder for Automated Inspection Development Toolkit missing / cannot install in 2012

    I try to install the VBAI SDK.  I have licenses and have installed:

    OR LabVIEW 2012 Professional Version

    Toolkit OR Vision

    OR in real time

    I find not all options in 2012 LabVIEW for the VBAI dev kit so I tried to run the install and it says:

    "The Vision Builder for Automated Inspection Development Toolkit requires LabVIEW 2011 be installed, please install LabVIEW 2011..."

    Why can I install it on LabVIEW 2012?  2012 is out for 1 year... How VBAI does not support LV 2012?

    Should I install Labview 2011 to make this work?  I don't have the DVD for 2011 so it will be a royal PITA to install.

    Hello

    > Why can not install it on LabVIEW 2012?

    VBAI 2012 is a LabVIEW application that was built with and require runtime LabVIEW 2011.

    The VBAI SDK, just like the run LabVIEW stage, require the same version of LabVIEW VBAI was built with.

    We could technically remove this limitation under Windows, which would have implications serious performance the performance of the custom steps, but many customers who design custom steps also want to do on targets from a distance (for example smart cameras, EVS or CVS). Currently, it is not possible to support several facilities next to LabVIEW on real-time targets. For this reason, we have decided to only support that has the version of LabVIEW VBAI.

    Please contact your sales representative OR to get a copy of LabVIEW 2011 you need for the SDK.

    The next version of the VBAI (2013), support 2012 LabVIEW for the SDK and run LabVIEW steps.

    Best regards.

  • Error - Vision Builder Inspection to LabVIEW Migration


    You can verify that you have read/write access to your temporary folder (in general C:\Documents and Settings\Settings\Temp).

    This error is due to the fact that a temporary file (VBAI.bin) is probably not written in this file or cannot be read during code generation. Is it present in this folder after you try to generate the code?

    What privileges you have when you run Vision Builder AI? If you are logged on as administrator? You can try to run Vision Builder with administrator privileges and see if you still get the same error?

    Also, what operating system are you using?

    Thank you

    Christophe

  • Vision Builder - error creating LabVIEW Code

    Hello!

    I use Vision Builder 3.5 and LabVIEW 8.5.1. Vision Development module is also installed.

    I've built several routines inspection with the Vision Builder. Then I tried to create .vi-files. Then I hit tools-> Inspection migrating to LabVIEW...

    In the next box I select:

    1-version of LabVIEW: LabVIEW 8.5 - NEITHER Vision 8.5.0

    2 - the directory I want vi-files to be.

    The migration begins, but it is never finished. There is always the following error message:

    Error during creation of LabVIEW Code #3

    I have not found additional information about this error code. So maybe someone is able to help.

    Thanks in advance.

    It seems that the error occurs when you try to play a file which contains the parameters of control of that Vision Builder AI generates. This file may have been corrupted and Vision Builder AI fails to write correctly. I have attached a simple VI to determine where this file lives. Make sure that the file is not present before generating the code and that you have write access to this directory.

    Hope this helps,

    Brad

  • Selection of Inspection based on the attributes of the image

    I'm processing the stored images and must choose an inspection based on attributes of the image as the name and the size (length in pixels).

    Currently, I do all this in only one inspection, but since I'm inspecting several product families (differentiated my name of the image), and several sizes for each family, my inspection algorithm becomes very difficult to manage, so I would like to create a supervisor application that can determine which family of products and the size I'm looking, and then run the corresponding inspection and then do some data sharing and saving the image and loop back to the next image.

    I played with the ability to select Inspection in VBAI, but since I'm not on the material or communications to select the inspection, I can't seem to find a viable solution, ideally, I would like to go through the step of configuration once, then jump to the state diagram for the treatment of the initial image (determine the product family and size) then go to 'Select Inspection' and run the corresponding inspection.  This is where I'm stuck, IE., how to trigger the jump to select inspection in the state diagram?  Some people I have consulted so far say: you can't do that!  Anyone beg to differ?

    If I can't access select Inspection of state diagram, then plan B is to use the LabView API and make the principal contractor in LabView, it is where I need to go?

    Thank you

    Eric

    If you have the indicator Activate Product select enabled, select product State will run automatically after the State inspect goes to terminal completion. You can use a VI select LabVIEW Run in the State of product for your logic and move to the next round to load. With Vision Builder AI 2010, this path can be considered to be the real path to the inspection (inspection select dynamically run then) so you do not preconfigure a lookup table of inspections to run with values (it was the previous way of doing and it does not allow to dynamically load new inspections that weren't in the preconfigured table). Don't know how it works with your system, but using the LabVIEW API is an alternative that would give you better control and. You might even have a stage run a LV VI specify the control to use on an iteration in Prioduct selection state and inspection of logging of data/images to use later, but due to the opening and closing of the inspections overload new inspections may make having an inspection separate for logging of common data/images does not not your needs timing.

    Hope this helps,

    Brad

  • Control of a system of engine not to not 2 - axes of Vision Builder

    Hello

    is there a way to control 2 Motors step by step via Vision Builder?

    What are the components do I need?

    BR,

    Klaus

    Hello knuemm,

    There is no action, which allows to directly control the player. It depends on your hardware configuration, some engines step by step has a serial interface and also the device the vbai is running on other devices of movement has a digital input and some vbai devices have outputs digital that may be used for this.

    Fleeing a LabVIEW VBAI Inspection

    I followed the smartcam NOR control pilot Motion

    You can also create steps for the VBAI to run LabVIEW code

    NEITHER Vision Builder HAVE Development Toolkit

  • NEITHER Vision Builder, acquire Images with fake delivery

    Hello world

    I am a student and I work as a trainee in a company, which produce helmets.

    To control the quality of helmets, there is a Webcam, wich take pictures of each helmet product.

    These Images are saved on the server. With the tool 'Simulate delivery', I can analyze the images, which are now in the folder.

    But when a new Image is the drop in the folder, I actually start the inspection again.

    How can I realize that NI Vision Builder always takes the current Images in the folder?

    Thank you very much for your help!

    Best regards

    Romain Menz

    Here is a simple example that illustrates how to dynamically read the images from a folder. Once the image has been retruned to VBAI, the image file is moved to a subfolder called Complete, so he has not read again the next time step is called. Step returns an error if there is not more images of the file type in the folder.

    Hope this helps,

    Brad

  • Result variation and inconsistency Ni Vision Builder AI

    I am currently using OR Vision Builder HAVE (2012) to analyze a series of images, and the preparation of appropriate inspections, I noticed that the results are not reproducible.  I am currently using various measures of analysis such as the color of the measure, number of pixels and the strength of edge and using the data logging feature.  The problem is that if I double-click on a stage as if to change, click on transfer to the next image, without changing anything, click OK, and then run all the tests again, I get different results.

    For things like the number of pixels that is relatively small - anywhere.0001 about 3 when it comes to figures around 200, but for the strength of edge especially these range from 10-20 at a time and sometimes he could find even an advantage that is then seen in over 40 years (and the edge resistance threshold is well below this value).  If this is inevitable then I can run many tests and average results, but it will be a lot of time because it also involves the steps wrong edition.

    Mainly, I would like to know if it is common and expected and if there is a known percentage error, or maybe I can change the configuration of the program in an attempt to overcome the problem?

    Thank you!

    The good news is that we have found what is the problem. When you change a step that uses a coordinate system and the current image is not the same as that used during the stage was originally set, the return on investment is transformed to the new position and step updates the settings used for this new position, when you press OK. Rounded the errors that occur when the transformed KING is caluclated, the new system of basic contact information you may not in the same positions of the KING. Kings use integers and therefore round us to the nearest integer, but it does not exactly the same positions as the coordinate system original base product. This may cause the new coordinate system of the step being out of up to 1 pixel and causes the return on investment deal with a slightly different part of the image

    For a given inspection/images, the results will not change unless you change the step that's important.

    If you change a step, but do not want to make changes, press Cancel instead of OK, and all settings will be the same.

    We will study a real fix for this problem that involves only update the coordinate system basis when the user redraws the return on investment, but the bad news is that this correction will not be in the version of Vision Builder AI we are about to go out.

    I'm sorry for this gap, and we plan to address in the future.

    Thank you

    Brad

  • run a VI in labview with Vision Builder (VBAI)

    HELO,

    I try to use the 'run VI' tool of the vbai (2010). When I lunch the inspection on my PC (with labview 2010) it's ok, but on another PC (without labview), I got an error message (dll is missing).

    I have to copy the data in a specific folder to use this tool?

    You have solutions to solve my problem?

    Thank you

    Ulysses

    If you read the context-sensitive help for the LabVIEW execution step, there will be clear instructions to operate the LLB for Vision Builder AI. I'm not including instructions here because they change slightly depending on the version of the VBAI you are using. However, here are some useful links:

    http://digital.NI.com/public.nsf/allkb/231D87B9D8C3B71A862572D4007EAAF8

    http://forums.NI.com/T5/machine-vision/quot-make-sure-all-of-the-VI-dependencies-including-VI-lib-VI...

    Access the LabVIEW execution step in VBAI, change it, then go to the help > show contextual help (Ctrl-H). In the FAQ tab, there will be a link to describe in detail how to build your LLB for distribution... read carefully and follow the directions.

    Hope this helps,

    Brad

  • Continuous imaging using vision builder

    Hello, I use NI 1744 and want to know how to get and record continuous images using Vision Builder. I am in a position to acquire and maintain a single image but cannot acquire continuous images.
    Looking forward for your help.

    Bürki,

    You try to save the images continuously as a movie?  This is not supported in VBAI, however if you want to align continuous images individually you can try to change your pattern of State inspection to repeat your current inspection and the transition to the stage stop only after that your current inspection was conducted a defined number of times.

  • Migrating to labview vision Builder... Many VI

    Hello

    I use the latest version of labview and OR vision builder. Using Vision builder get the coordinates X and Y of the object in this area. I need to export this to labview. I tried going in "Migrating to labview. I created a new folder then I gave the name. When I click OK. It creates many VI. I need this in VI only. When I opened the "main.VI", I see that "make, start." When I check the block diagram. I couldn't find the programe I needed for it.

    Hope you understood my question.

    Can you please help me.

    Thanks in advance

    Another option, which could be used in conjunction with the API mentioned Christophe solution is to your X / Y values the variables that you update your VBAI inspection and then read in your code LV. Here's a tutorial on the use of shared variables to communicate the results to the LV of the VBAI:

    http://digital.NI.com/public.nsf/allkb/D492139A746F91A8862576E80051BBCE

    Here is a video showing how to use the API that Christophe has mentioned:

    http://zone.NI.com/WV/app/doc/p/ID/WV-2424

    Here's a video of the use of shared variables (demo shows using targets of the RT, but the same idea might work locally):

    http://zone.NI.com/WV/app/doc/p/ID/WV-2423

  • Cannot acquire image with NI1744 using the interface configuration of Vision Builder AI 2011: error-1073774588

    I use a 1744 OR with NI Vision Builder AI 2011. When I'm in the interface of the inspection, the camera will acquire and display an image. When I go to the configuration interface and try to put in place the stage of image acquisition, I have error-1073774588: the undefined error. I sometimes also 1074396159 error: not enough memory.

    Thank you for your repply Burrito.

    The problem was sloved and two errors went away after I formatted the camera and reinstalled the software on the camera.

  • Migrate from Vision Builder for LabVIEW 2011 2012

    Can I migrate LabVIEW 2011 Vision Builder AI 2012? Or I have to install LabVIEW 2012?

    Nope. If you have the Vision builder AI 2012 it supports LabVIEW 2011:

    http://digital.NI.com/public.nsf/allkb/A2639FCFCCB2A8B086257FA300559827

  • Integration of third party Vision Builder C++?

    Hello
    A customer of ours uses NI Vision Builder in an application and questioned on the possibility of integrating our algorithms with her exclusive image processing.  Our code is a C/C++ library.

    I did some reading and downloaded the eval package, but it is not clear to me if this is allowed with the product.  The defined C API allow access to built-in functions, but I've not seen an obvious way for third party algorithms to access images or add new features.

    Vision Builder only supports it the algorithms or can developers add custom product image (in C/C++) processing algorithms?  Thank you.

    Hi eepdx,

    VBAI is not a contribution to the third-party code integrated directly in the script. And you are right about the C API.

    You can use the range of Vision Builder AI communications to communicate with the C++ application. Or you could translate your final VBAI script by LabVIEW code, then, LabVIEW can call a dll, so you could create a C++ application dll and call it from the LabVIEW code (it would be more complex).

    I hope this helps.

    Daniel C.

Maybe you are looking for