Visioneer OneTouch 8700 USB Scanner Driver for Windows XP SP1 installed SP 2 compatibility mode - does not

My machine is upgraded from XP SP2 to Windows 7. Support was interrupted by the manufacturer scanner after the pilot XP SP1.   Update of Windows in my system is always sur-installe updates automatically.   The scanner driver has been downloaded from the MFRS. ' site and installed in my computer Windows 7 in "compatibility mode for XP SP2. The scanner icon in my system tray.   To make a physical connection to my system, I get error that it can not be connected or cannot be configured.   I have two USB ports of work attached to the Mo (Chinese-"Weibu") and two USB PCI card is compatible with XP and earlier versions (as shown on the box, no mention of Windows 7).   I tried all these ports, always the scanner does not connect to my system.   In addition, my device manager under USB controllers, shows the exclamation marks in yellow triangles against two elements of the same name: "VIA Rev 5 or later USB Universal Host Controller.   I uninstalled these 2 elements and restarted my system several times, without success.   At each reboot, the yellow marks disappear but soon reappear.  But the scanner worked perfectly fine in my old XP SP 2 system before moving on to Windows 7 and before installing the USB PCI card.

Is there a solution to this problem up the old USB devices and running in the Windows 7 environment?   (I have a very old IBM PC Camera too that works well in my old XP system, but not yet tried in the current system, even if the driver has been installed).

If finally I am not able to use the scanner under Windows 7, I reluctantly get Windows XP reinstalled on another drive and boot into it just to be able to use the scanner which is functioning perfectly.

I am a person of 78 years and enjoy using and experimenting with my PC, which has become an addiction for me.

Thank you.

You can buy a copy of XP that would probably cost more to replace the scanner and now is not the right time to install XP anyway.

Your webcam is a lost cause. Compatibility mode has been designed to work for older programs, and Microsoft does not recommend to use it to install the device drivers. I have no idea why some here suggest a possibility...

Tags: Windows

Similar Questions

  • Epson XP400 Scanner Driver for windows 7 64 bit

    I need driver aScanner for Windows 7 64 Bit for a 400 XP of Marisa, I can't have that of Marisa install to use the handler etc.,.

    Hello

    I'll help you download the driver for the Scanner Epson XP400 for windows 7 64 bit.

    You can download the Scanner Epson XP400 driver for windows 7 64 bit from the link:

    http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=201986&BV_UseBVCookie=Yes&infoType=downloads&platform=OSF_W_7-64

    If you have problems with the Epson XP400 scanner, follow the steps in the link:

    http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=FAQs&OID=201986&prodoid=63094159

    Hope the helps of information. If you need help, please answer that we will be happy to help you.

  • Broadcom 2070 Bluetooth driver for Windows 8 will install

    Broadcom 2070 Bluetooth driver for Windows 8 will not install with windows update or Device Manager.  Error code 80070005.  Help, please. I can't use my Bluetooth headset.  Best regards, Callie

    Always the same problem and cannot find a solution. There is a fix available?

    Kind regards
    Otavio
  • HP Envy M6 1303-er USB bus driver for windows 7 x 64

    Hello! A problem - after installing windows 7 on a laptop HP Envy M6 1303-er - I can't find a driver for the SM bus controller, because that does not work, flash, mouse and other peripherals drives and the USB bus. Please suggest a solution, thank you in advance for your help.

    Hello:

    Download and install the amd chipset drivers and restart.  You want the first file listed in the link below.

    To install the smbus and usb 3 controllers.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  • Need EPSON 3200 Photo Scanner driver for Windows 7 (64-bit)

    I installed Windows7 (64-bit) operating system but cannot find any driver for my scanner EPSON Perfection 3200 PHOTO routing. Any help, I would apprecoate.

    On the Epson site, take a look at this:

    Epson Perfection 3200 PHOTO
    http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=20882&prodoid=27766185&infoType=downloads&platform=Windows

    The select the operating system drop-down list does not list Win7, WinVista, etc., only 32-bit Windows and 64-bit Windows; If all goes well, this is the driver you need.

    There is also a Note about the Windows operating system 32-bit/64-bit

    Kind regards

    chet814

  • HP Pavilion 23 AiO need USB 3 Driver for Windows 7 Pro 64-bit

    Hello

    I need driver USB for HP Pavilion 23 AiO for Windows 7 64 bit. I tried to install the chipset and USB drivers on the HP driver Web site, but he says that I don't have perfectly meets the requirements for installation?

    Hardware ID

    PCI\VEN_1022 & DEV_7812 & SUBSYS_2AEE103C & REV_03
    PCI\VEN_1022 & DEV_7812 & SUBSYS_2AEE103C
    PCI\VEN_1022 & DEV_7812 & CC_0C0330
    PCI\VEN_1022 & DEV_7812 & CC_0C03

    OK, so I'm done fixing this problem. Because there, anyone having the same problem as me, here is how I did it.

    Assuming that you are trying to install the USB 3 on Windows 7 64 bit drivers...

    1. go here and download the Original Texas Instruments USB controller driver

    2. before executing the downloaded file (sp57875.exe), click on Start/Run then type folder and press ENTER.

    3. run the executable file (sp57875.exe). You will notice the content excerpt in the TEMP directory % opened in a randomly named folder.

    4 copy the entire folder on your desktop and then cancel the rest of the installation.

    5. go into your configuration/system control panel and Device Manager/security

    6. right click on the USB controller in Device Manager and click on Update driver software...

    7. click Browse my computer for driver software

    8 go to the desktop where you put the TEMP folder and select the src directory

    This should do the trick. I had to repeat 6,7,8 for all USB drivers that were not installed correctly. You can get a uknown device show up once you apply the first installation, just repeat steps 7,8,9 on the unknown device and it will install the USB 3.0 hub.

    I hope this helps.

  • HP Pavilion dv7-6110sl HARD drive driver for Windows 7 SP1 X 64 bit

    As the title says I need the driver to install Windows 7 SP1 X 64 on my

    HP Pavilion dv7-6110sl.

    When I want to install it tell me that there is no HARD drive installed or no driver not found.

    Carpe Diem!

    My problem is that I was installing from a USB key using the usb 3.0 port. Windows does not see the usb 3.0 port that I was installing of for once I moved it to the usb 2.0 port it started working. I didn't need all the drivers.

  • Forget the password for windows 7, try to restart with. F8 does not work as there is no default administrator

    I forgot the password for Windows 7, I tried to try with the option of safe mode, but once again the password is required

    There are a lot of options built into Windows to help you out of this situation:
    • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
    • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
    • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
    • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
    • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
    • Check your paper files (works only if you threw down the password somewhere)
  • Trying to update Win 7 HP for Windows 7 Pro - at any time to update does not accept my product key

    Bought two Win & Home Premium & W7 Pro to Sam W7HP is OEM, W7Pro upgrade (a cardboard hanger). Have installed W7HP and works well. Update at any time does not accept my Key Prd. Key to sting has 25 characters + -01 at the end. I can enter 25 characters (with auto-add dashes) but when I try to enter the - 01 it won't take. Present the key without the - 01 returns a valid product key error. Tried 3 times and checked my typing with each. Would appreciate any help.

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • Try to install Indiana Jones and the infernal Machine, Windows (8 / ME) compatibility mode does not

    I try to install Indian Jones and the Doomsday Machine on my computer.
    I tried using the compatibility mode for windows 98 / ME, but it does not work. When I run the program splash arrives, but when I click on install it closes then nothing happens. There are no errors.
    I am running Windows 7 64 bit.
    Also I install the original CD, and it has worked before in older computers (running Win 98 of course).
    Any help would be appreciated.

    The game should run fine under Win7 64 bit. The problem is that the installer is only 16 bit and is no longer supported in Windows. Just use a different Setup program. Try www.markusegger.at. I'm running the Doomsday Machine, Alliance Xwing, Xwing v's Tiefighter, and Grim fandango all on 64 bit Win7 all using custom Setup programs.

    I also used the original X-wing, Tie-fighter and fate of Atlantis via Dosbox.

  • Windows vista Home premium recovery question - how to get the source for windows vista home edition premium as the recovery does not work since the recovery partition

    How to get the source to windows vista Home premium recovery is not from the recovery partition and gives me an error message

    Hello

    Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    http://www.theeldergeek.com/Vista/vista_clean_installation.html

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

  • I got updates for windows vista, but now my microsoft Word 2007 does not work. It ask for a product key and I put one of the dvd case, but he said that is not correct, I use program can someone help with this problem.

    product key no longer works on my office 2007 business what could be the problem?

    Hi Cincmj,

    Welcome to the Microsoft Answers Community Forum site!

    The question you have posted is related to Microsoft Word and would be better suited to the community of the Office Applications.

    Please visit the link below to find a community that will support what ask you:
    Discussions in Desktop Applications
    http://www.microsoft.com/office/community/en-us/FlyoutOverview.mspx , that allows to solve your problem!

    I hope this helps!

    Thank you best regards &,.
    Calogero - Microsoft technical support.
    Visit our Microsoft answers feedback Forum
    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  • installation of the Bluetooth driver for windows 8

    I m using asus x45c. in my device manager it is a yellow exclamatory sign in front of the bluetooth icon. Troubleshooting I have problem with my bluetooth driver and I m not get a updated driver for my "bluetooth usb adapter Alps". The site of asus but when I tried to install it, I downloaded 1 they r saying "no bluetooth device run that the device is plugged".i m not sure if the software is compatible with my device.it will be very helpful if you can provide me with a link to a driver that is compatible with my device. or tell me how to solve the problem with bluetooth.

    Hi Fred,.

    We would like to know the following details to help you come.

    What is the bit Version of the Windows 8 operating system that is installed on your computer?

    Click on the link below and download Bluetooth driver for your laptop. If your computer is running a 64-bit version of Windows 8, then download the driver from this link on the other you can download the driver for Windows 7 and install it in compatibility mode.

    Support for laptop X45C

    http://support.ASUS.com/download.aspx?SLanguage=en&m=X45C&OS=8

    You can follow the steps in the link given below to install the driver in compatibility mode.

    Make the programs more compatible with this version of Windows

                                            

    http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

    You can also try to contact the Support Team technical Asus on the link below.

    Technical question

    http://VIP.ASUS.com/VIP2/services/TechQuery?lang=en-us

    Do not hesitate to write us if you're still having problems. We will be happy to help you come.

  • How can I download canoscan lide 25 driver for windows 8?

    I have a scanner gun (Cano scan lide 25) and I was unable to download a driver for it that is compatible with windows 8.

    Please someone tell me if it is possible to operate this scanner with windows 8

    Hi El-Sayed,

    I suggest you download the drivers from the link below. There is no driver for Windows 8, so download driver for Windows 7 and install in compatibility mode, and check if it works.

     

    Software drivers &

     

    http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_lide25#DriversAndSoftware

    You can follow the steps to download the driver in mode of compatibility from the link below.

    Make the programs more compatible with this version of Windows

    http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

    Write to us at the State of the question. We will be happy to help you come.

  • Wireless LAN Driver for Windows 7

    My model is 15-r038tu and I tried to downgrade winsows 7 Windows 8.

    After that, I couldn't find the LAN driver wireless for Windows 7 in the HP website so it does not work.

    Who is in the know and could you let me know which one is suited?

    Hi, eddie_yu

    http://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66924.exe

Maybe you are looking for