Vista 32 bit loses the internet connection after about 10-15 minutes.

Similar Questions

• Windows 8 I lose the internet connection after waking from sleep mode

  My wife has a new laptop from Toshiba with Windows 8. When he wakes from sleep mode, it detects all wireless signals. If it restarts the computer, it detects our own wireless, as well as all the neighbors signal. Is there a simple way to correct this trend? She dislikes having to reboot the computer whenever she wants to use it.

  Very interesting what's happening on a new machine. Are you sure the original wireless network card driver has not been updated (i.e. through Windows Update or its equivalent at Toshiba?)

  I guess that the wireless network card driver doesn't handle well "message sent" by the system when it changes the power state change leading to a 'dormant' device (in this case the WiFi network) on the revival of the fashion Watch (same problem with the Hibernate?).

  Not knowing your model Toshiba, or wireless network card let me suggest you try the following if options exist for 1 # *:

  1. Go to the section of the network adapters and Device Manager. Right-click your wireless card, and select Properties. Go to the power management tab, uncheck allow the computer to turn off this device and check allow this device to wake the computer , and then save your changes
  2. Go to the control panel and Power Options to change the parameters of the plan (for the selected power Plan), and then select change advanced power settings / wireless adapter / power save Mode / connected and select value is A maximum Performance otherwise affect this value

  * Not sure about my translation of terms/options used above - I am not in an American version

  If the above does not help I'd you make investigations with Toshiba on this issue as the owner of a new machine, you're probably eligible for a level of support.

  + Feel free to bring your network card and Toshiba models - this helps in search of possible measures and troubleshooting. And it could help other people if solve you the problem sooner or later...

  Hope this helps

  See you soon

  LZ.

• Satellite C660-28V - lose the internet connection

  I have two satellite C660-28V.

  Problem is that I lose the internet connection on a frequent basis. I have to reset the modem for internet connection back once again. This problem I have with these two laptops from Toshiba.

  I also own another laptop (Dell) and a local network connected PC: no problem with these.

  Have you noticed this problem with the modem connection only?
  LAN and WLAN connections work properly?

• iMac loses the internet connection when I turn off wifi

  Any help appreciated! I'm not very computer savy! Can my grandson tell me (how) on some things.

  I lose the internet connection when wifi is disabled. It will happen when using any browser, Firefox-Safari-Google Chrome.

  Desktop computer is connected to the modem.

  Model name: iMac

  Processor name: Intel Core i7

  Processor speed: 3.4 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 8 MB

  Memory: 4 GB

  Any ideas? Thank you

  You can use an ethernet cable between the modem (= the internet connector) and the iMac.

  WiFi is like an invisible computer thread worms (among others) the modem. When you switch WiFi off, your computer cannot reach the modem and so there is no internet on your computer.

• I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?

  I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?

  Debbie

  How do you know that the loss of your internet connection has nothing to do with the Windows updates? You must find the reason for the loss of the connection.

  How do you connect? Is a wired or wireless with a modem or a router? If a router is the router shared with another computer and this computer can connect to the internet? You need to determine if the problem is a fault on your computer or a failure to connect to your internet access provider?

  What error messages are reported?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and sparkles in a pink/purple color

  I use Internet Explorer as my search engine and internet as my default msn.ca. The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and flashes in a pink/purple one color recovers to normal in 30 seconds approximately. I had an attempt of technician paid for help but couldn't. Can anyone help? Thank you

  Go to start / Control Panel / Internet Options / Advanced section then check the top box rendered = software use instead of gpu rendering / apply then OK.

  Restart all open windows ie11.

  For memory, Bing is a search engine ie11 is a browser and msn... is a home page.

  Any other number symbol use Gear and manage add-ons and toolbars and extensions and disable Adobe Shockwave element

• interruption of the internet connection after installing vista sp2, only a local network

  Hello
  Since I installed vista sp2 last week, I have no internet connection. Just, my laptop connects to the local network. I had already tried to uninstall sp2, but this does not resolve the issue. A restore of the system has not been successful (do not know why, windows just said failure of system restore). I also deleted my antivirus program and my firewall...
  The internet works occasionally for a short time and when I start in safe mode.
  Because I live in a House that I have to use a fix ip, gateway and dns. After you install sp2, windows says my default gateway does not match my ip address and subnet mask when I change the properties of TCP/IPv4. Using another laptop with XP, the internet connection works with the same settings.
  I would be grateful for a quick solution, without formatting ;)

  I've highlighted the TCP/IPv6 line of course ;) the button was inactive when even
  in the registry, I saw WHAT TCP/IPv6 is already disabled

  my internet actually works, but I don't know why
  I deleted the file DisabledComponets for TCP/IPv6 in the registry, rebooted, create one, rebooted and it worked
  but I do not know why :)
  I hope that my internet is still functional

  Thank you for your support
  concerning

• Installed Layered Service Provider (LSP) is defective, lose the internet connection

  One of my computers lose the ability to connect to the internet once a day or two.  When this happens, I can not connect through broadband or modem.  Usually, he regains the connection after an hour or two.  It also includes the connection when I restart the computer.  The problem started after about a year of use on this computer.  The computer is a Toshiba Satellite A215-S4757 with Vista Home Premium, Version 6.0 (Build 6000).  Other computers do not have this problem.
   
  Windows Network Diagnostics displays the message:
   
  A required network component is not working properly on this computer
   
  A provider bunk (LSP) installed is defective.
   
  Remove the defective network component
   
  I have thoughts on what is causing the problem and how to fix it.

  
  

  ICS internet connection sharing. A computer connects to the internet and
  others connect to the computer first. ICF (Internet Connection Firewall)
  protects against intrusions.
   
  http://support.Microsoft.com/kb/811259
   
  Manual steps to recover from Winsock2 corruption for Windows Vista users
  Winsock corruption can cause connectivity problems. To solve this problem by
  using Diagnostics of the network in Windows Vista, follow these steps:
  1. click on start and then click Network.
  2. click on network and sharing Center.
  3. in the network and sharing Center, click on diagnose and repair.
  Note You can also access the network and sharing Center in Control Panel.
   
   
  Reset Winsock for Windows Vista
  To reset Winsock for Windows Vista, follow these steps:
  1. Click Start, type cmd in the start search box, right-click on cmd.exe,.
  Click on run as administrator and press to continue.
  2 type netsh winsock reset at the command prompt and press ENTER.
   
  Note If the command is correctly entered, you will receive an error
  Message. Retype the command. When the command is executed successfully,
  an e-mail confirmation will appear, followed by a new command prompt. Then, go to step
  3.
  3. Type exit and press ENTER.
   
   
  --
  ..
  --
  "wuverton" wrote in message news: 19cb1db0-a9f8-493-a332-8725d 6165869...
  > I found a temporary solution. It seems that the Internet (ICS) connection Service
  > the origin of the problem. When I stop this service, I immediately
  > again to the Internet. If I take ICS, I lose the connection. ICS
  > restarts when I reboot, so the solution is temporary.
  >
  > Among other things, ICS provides intrusion prevention services. Is it
  > blocking of the Internet to stop trespassing?
  >
  > It is sure to have turned off ICS? If not, how can I permanently fix ICS as well
  > just to stop my internet connection.
  >
   
   

• I lose the internet connection randomly but never lose my wireless network connection.

  I use a hp pavilion dv9500 with 64-bit vista sp2 and built in a wireless adapter that will fall randomly my internet wireless connection, but maintains my wireless network connection with an excellent signal strength.

  My (non-permanent) fixed
  I know how to reconnect to the internet, but it forces me to diagnose a repair my connection. It then displays "cannot connect to Server primary dns (75.75.75.75)"after which it gives "things to try" who never work and a button 'Reset the ip address' that I click. " repair bar will fill up to half way and go to a new screen solution that shows more 'solutions' and a "reset wireless adapter" button which I click. the remedy bar will fill and then display windows can not solve the problem and go for help. I then manually disconnect from the wireless network and my computer will automatically reconnect to the network and to the internet. It takes about five minutes to fix, but it happens so often that it is getting boring. The process will not work if I only to reset the ip address and then disconnect from the network, only to reset the wireless adapter and then disconnect, or just disconnect from the network and reconnect. I have to reset the ip address and the wireless adapter and then disconnect from the network.

  The internet connection will tend to disconnect when I watch a lot of youtube videos, when I download large files like a game on steam, or just just randomly when I use it. I'll use it for a long time and he can't let it go, but sometimes it will go down to ten minutes after I had just reconnected in a drop-down list. It happens randomly without another warning that download time will increase from 2 mb to 50 k in two seconds all about or stop the loading of a youtube video when I look at it.

  I searched everywhere for an answer, but it's as if it were a new problem for all humanity or just im the only person who does not know how to solve this problem, because there are no forums or FAQ not related to my problem. It is not so much a serious problem such as an irritating problem that appears at inconvenient times or when I just want to relax and watch a video. It takes some time to reconnect and even though I know how it would be better if my connection would just stay connected to the internet at any time.

  I have no idea what the problem could be that whenever I have find I never get related problems. all advice or solution would be great.

  I also share this modem with other three commonly used computers: a wired office and two other laptops that the two are connected wirelessly. both other laptops do not have the same problem as mine. My router is a linksys e3000 wireless router.

  Hi DustinMoor3,

  Follow the troubleshooting steps posted by Shekhar (marked as the answer) in this thread to solve the problem with no connection to the primary DNS server, in particular the method 2 worked for other users.

  * These steps should also work for Vista *.

• Lose the internet connection in between while trying to browse online

  Original title: lost session?

  I don't know anything about computers! I work from home so I have my work here computer and my laptop.

  When I'm working, I regularly lose connection and my screen go black and then he says: "session lost."

  I have to disconnect from the internet and wait about 30 seconds and reconnect on/again.  I also lose the

  connection on my laptop when this happens.

  I have AT & T service and a Cisco router.

  What is an outside source that makes me lose my connection?

  Thank you!

  Hello

  1. using a wireless or a wired internet connection?

  2. you receive a specific error message/code when you lose the network connection?

  3 did you change on your computer before the show?

  According to the description of your problem has been the issue is not specific to a single computer, because you lose the connection to both of your computers at the same time. Keeping this in mind I recommend you contact AT & T by clicking the link http://www.att.com/esupport/

  If AT & T guide you indicating that the problem is with your computer, you can then follow the steps mentioned below:

  Method 1:

  Step 1: Perform a safe mode with networking

  Safe mode, start Windows in a limited State, where only the essential is started. If a problem does reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as causes possible

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: Perform the clean boot

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Method 2:

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 3:

  Many network connection problems are caused by hardware that is not configured correctly. Here is some information on how to check your cables, check or reset your modem and check for problems with your network adapter

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

  Method 4:

  When you run the network troubleshooter utility, any problem found, along with any solution, appears in the dialog of the resolution of network issues. If it has more detailed or technical information about the problem and possible solutions, it is saved in one or more event logs

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  It could be useful!

• I lose the internet connection on during approximately 10 seconds every 10 minutes

  I use a Sony Viao and wireless broad band, I don't know there is something wrong with the Internet because the signal on my other devices remains coherent and connected at any time, it's just this computer which seems to be losing it. its really frustrating that I use the PC to watch TV, the connection always seems to be lost in the really exciting parts! If anyone has any ideas as to why this maybe I'd appreciate your comments.

  Thank you

  Hello Allison,.

  Thanks for posting your question in the Microsoft community.

  I understand that the computer loses random Internet connection. I am here to help you and I suggest these methods to solve the problem.

  Method 1:

  Check out the link and follow the steps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Check out the link and follow the steps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Method 3:

  Reset the TCP/IP and check. Check out the link and follow the steps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  For any help about Windows, you can still post on the Microsoft Community Forum.

• Lose the FTP connection after you put the computer to sleep

  I usually work in Dreamweaver on my Macbook. However, if I'm working on a Web site and decide to stop for a while (it's how I closed my Macbook), everytime I open my Macbook again, so lost FTP connection. Sometimes it comes back after a long period of time, and other times I can do return disconnection/reconnection airport several times. But most of the time, I just closed Dreamweaver and reopen it. If I do this, the connection works perfectly again.

  Does anyone know how to avoid to have to close and restart Dreamweaver in order to maintain the FTP connection after having put a Macbook to sleep?

  The FTP queue time is set by your web hosting provider.  I don't think DW has mechanisms in place to send empty commands to keep the connection alive, and even if it did, it would take the computer to be operational.  You shouldn't have to restart DW well in order to get a connection.  Simply by clicking on the login button in the files panel should do the trick.

• Problem WiFi on Satellite Pro C660-2TQ - lose the internet connection

  Hey people,

  hope you could help me. I did a new clean install of Win7 (32 bit) on my Toshiba Sat, C660-2TQ.

  His job very well, except one thing:
  the adapter Realtek RTL8188CE-in my laptop is just terrible...

  I installed the latest driver for this Home Premium wifi, but I lose the conn. to the internet all the time.
  While I have to disconnect in the bottom right corner my laptop and connect again manually.
  I have to do this every minute or so and its very annoying.

  I saw read several discussions about the problems with this specific wifi adapter, but no solution has helped me...

  I didn't install all the listed drivers (34 available for me) but then what I Normand to update my BIOS or would it be a driver as the driver for the touchpad is necessary to get my wifi working properly?

  Hope you guys could help me...

  honestly desperate

  cordially :)

  Hello

  WiFi disconnection problems have different causes and its not easy to say why it happens.
  So, you will need to check each step and each option.

  First of all, you will get the latest version of the driver for this adapter WLan on the Realtek driver page:
  [Download driver Realtek RTL8188CE | http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = EU tr]

  Would recommend that you do not install this driver.
  Before you begin with the installation, uninstall the previous driver.

  Secondly: it would be possible that this issue isn't related WLan driver and update the driver wouldn't help you much. In this case you should check the other parameters.
  I recommend you to check the router settings and test different standards WLan (802.11 B / G or N).

  In many cases, the problems of compatibility between the router and wireless network card could lead to similar to your question.
  Of course, you should also go to Device Manager-> card WLan-> properties-> Advanced tab
  and must check if you can switch between the WLan standards singles (802.11 B / G or N)
  Power management also in tab (last tab) you must unselect the option to turn off the device to save power.

• I lose the internet connection once the system go to sleep. I have to restart my computer to be reconnected.

  int loose connection after sleep, wake and up no internet still not found or access network AI everything without restarting!

  Win7 home premium. after sleep that I return to the CV, model wakes, no enternet no surroundings, net no availible conn, can not find network sharing Center nothing, Control Panel does not open Network Center, after reboot any return to normal until it sleeps again then the same thing. Whatz upward with whom? network dot red top, tray icon click to open the network sharing Center, nada, nothing happens but the circle of rotation of caos.

  Hello

  1. do you receive an error message when opening Network Center?

  2. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps mentioned in the links below

  http://support.Microsoft.com/kb/937477/en-us

  http://support.Microsoft.com/kb/933872

  Method 2:

  Try to update the network adapter drivers using the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• why I lose the internet connection when cut the power on my laptop?

  When using the internet with my laptop plugged into the electrical outlet, I have a reliable internet connection. If I unplug my laptop and just use it on battery I keep losing my internet connection. I have a Toshiba Satellite L670 series.

  Hello

  1. what type of Internet connection you have (wired or wireless) sound?

  Method 1: If its wireless network, I suggest you to change the settings of the adapter wireless in power management, go to start-> Device Manager-> wireless-> settings adapter type change efficiency Maximum power settings

  Method 2: If its network adapter will start-> type device manager-> in power management uncheck allow the computer to turn off device

  I hope this information is useful.