Vista 64-bit now I changed my OS 32-bit now my web cam does not work, tried to get the drivers from dell but did not help
of the vista 64-bit now, I changed my OS to Vista 32 bit , now my web cam does not work, tried to get the drivers from dell, but they are not available there. My laptop is studio-1537... Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
I check your firewall settings to see if it can cause a conflict with the season chat software.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
my built in webcam does not work.i one of my kids deleted some how and now it does not work what do I do
Hello
Try doing a system restore. Go to the SEARCH bar and type system restore.Once the System Restore screen, select a restore point (it must be before the problem occurred), launch it. Check.You can also update the drivers of your computer (the webcam driver). If you do not know how to locate, you can use RadarSync to find out-of-date drivers.David -
Web camera does not, windows vista on a computer laptop toshiba a300 satellite
I was wondering if you might know how to solve my problem. Recently, I restarted my laptop and have had problems with the installation of Service Pack 2. However, he miraculously installed on the computer today and once rebooted after the installation of Service pack 2, it has now in an error box "the webcam driver open fail. "Please restart camera or computer.
I restarted the computer and there no resolver question and I can't open or find the webcam in my control panel and can not find if the driver has been corrupted or another. Any help would be greatly appreciated. Thanks a lot :)
Hi Zam,
I suggest you to follow the steps and check if it helps.
Method 1: Download the latest driver for your Webcam from the link and check if it helps.
http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EUMethod 2: You can also try uninstalling and reinstalling the drivers of Webcam and check if that helps.
(a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.
(b) click on the Hardware tab.
(c) click the Device Manager button.
(d) search of Webcam.
(e) right click on the webcam, and then click Uninstall to remove.
(f) restart the computer, and then reinstall the driver for the webcam. -
Upgrade to vista SP2 and now a driver does not work properly, and my web cam does not work
What driver update I have to install after installing windows XP SP2. Can I install it from microsoft or the manufacturer of my computer, HP?
What driver update I have to install after installing windows XP SP2. Can I install it from microsoft or the manufacturer of my computer, HP?
Hey zanalder
If your webcam is integrated into a laptop hp you get all the drivers for hp
http://welcome.HP.com/country/us/en/support.html
If you have a desktop computer with a separate webcam go on webcam manufacturers website and look for the webcam software
Walter, the time zone traveller
-
I can not get my web cam lights up now, as I did, until I upgraded to the Tower of vista (32) to windows 7.
Hello
HP dv9000 Pavllion's system is not compatible with Windows 7, this is the reason that the Web cam does not work on the system, I suggest you to download the drivers for the Webcam from the link below and install it in compatibility mode and check.
See the article mentioned below to install the drivers in compatibility mode.
Make older programs in this windows version
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
Download the Webcam utility from the link mentioned below (the software).
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
I have an acerDiagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: invalid license
Validation code: 50
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - XY9X3 - JDXYP-6CJ97
The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
Windows product ID: 89583-OEM-7332157-00211
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6002.2.00010300.2.0.003
ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Vista (TM) Home Premium
Architecture: 0 x 00000009
Build lab: 6002.vistasp2_gdr.110617 - 0336
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{F20B4B72-1308-45BE-8F90-95E91A3F0AAF} 1.9.0027.0 6.0.6002.2.00010300.2.0.003 x 64 *-*-*-*-6CJ97 89583-OEM-7332157-00211 2 S-1-5-21-923204104-223683984-168055983 Acer Extensa 5630 Phoenix Technologies LTD. V1.30 20090319000000.000000 + 00070333507018400FA 0409 0409 US Mountain Standard Time(GMT-07:00) 0 3 ACRSYS ACRPRDCT 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.0.6002.18005
Name: Windows Vista, HomePremium edition
Description: operating system Windows - Vista, channel OEM_SLP
Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
Installation ID: 004511331255365043724851364501374781338933223323713385
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
Partial product key: 6CJ97
License status: Notification
Notification reason: 0xC004F063.Windows Activation Technologies-->
N/A--> HWID data
Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ isActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP INTEL CRESTLNE
HPET INTEL CRESTLNE
START PTLTD $SBFTBL$
MCFG INTEL CRESTLNE
SLIC ACRSYS ACRPRDCT
ASF! OEMID OEMTBL
SSDT BrtRef DD01BRT
SSDT BrtRef DD01BRTAh! -in this case, it is not necessary.
I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033
Open the Windows Update - click the link view updates installed on the left of the page
in the list, find the WAT update KB971033, and then uninstall it.
Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033
redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?
-
My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome. System also starts on the Vista CD.
System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.
That's it, that's all what he will do. I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.
I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.
Help or direction is appreciated.
original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.
See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all. You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer). Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.
So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step. Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair. Check out several options and compare the costs, quality and guaranteed and then make your best decision.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work. Cannot change network settings. This is the messege I get: the system cannot find the environment that was entered
Hi kotipelto.
To better understand the issue, we need the following information:
Are what environment you referring? What did you delete?
Let us know if you can start the computer in safe mode and works as expected.
Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Boot advanced options, select the menu safe mode.
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
If you can start the computer in safe mode, perform the system restore.
System Restore: System Restore to put the computer's system files to an earlier point in time.
Search the steps mentioned in the link below:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-sytem-restoreThank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I upgraded my dell e1705 inspriron from xp to vista and now my cd/dvd does not, in my opinion, driver is missing... what I do
See this article would allow:
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461 -
WiFi password has changed now my WiFi Repeater does not connect
to change my WiFi password now my WiFi Repeater does not connect, anyone got an answer for me.
to change my WiFi password now my WiFi Repeater does not connect, anyone got an answer for me.
Connect to your WiFi Repeater and set the password to match the password for the router.
-
After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?
This was the solution! The works of vpn as $ 1 million now. I followed the instructions above to enter the uninstall program and selecting the repair option. I rebooted the machine, then used the troubleshooting on vpn software compatibility option. Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.
Thanks, Nick!
Rick
-
I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect. It worked fine with the previous modem (a rented one TWC). Help!
Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.
Turn off the new modem for at least 30 minutes. More is better.
Perform a hard reset on the AirPort Extreme, then it turned off.
Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port
After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.
Then, turn on the airport and let it run a few minutes
Set up AirPort Extreme again
Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.
-
I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?
Try the following. It seems yo may have to let the battery drain is completely:
- iOS: do not respond or does not light
-Also try DFU mode recovery mode post-test
How to put iPod touch / iPhone in DFU "Karthik doodles."
-If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.
-Try a different cable
-Try on another computer
S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.
-
changed router photosmart b110 e-all-in-one printer does not work
changed router photosmart b110 e-all-in-one printer does not work
Hi aged60,
I'm sorry to hear that you have linking problems with your Photosmart B110 printer.
I've included a link to HP Wireless Printing Center Troubleshooting web page. In the section entitled "your printer was working on the network before and now is not" there are clear instructions to follow when your router has been changed or updated. If you follow the instructions you should be able to communicate with your printer.
HP wireless printing Center - Troubleshooting
http://www.HP.com/global/us/en/wireless/troubleshooting.html
-
recenly put a password on my router wpa settings now my wireless printer does not work
Hi I recenly put a password on my router wpa settings now my wireless printer does not...
Hello
1. what operating system is installed on the computer?
2. don't you get error message when the wireless printer is malfunctioning?
3. who is the manufacturer of the router and the printer?
Check the links below as a reference.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
Hope this information helps.
Maybe you are looking for
-
3 months of missing photos of the iPhone download
A few times a year I plug my iphone on my laptop to transfer photos, in case I lose my iphone. I plug it into my computer and when the pop-up box I click Import pictures and it does everything for me automatically. Last download I did was in June 201
-
Computer HP laptop Pavilion DV - 6 3153ei treadmill drive
I have recently upgraded to Windows 7-64 bit for Windows 8-64 bit. This caused a lot of probems on my pc and caused its crash. I lost all my readers of HP and my recovery disk is now completely empty. I want to restore my laptop to its factory settin
-
To find the local maximum, minimum in algorithm SIFT keypoints
Hello I find the local maximum and minimum in an image, not juice 8 district. There are three images of the same size but unlike differntly blurred images (difference of Gaussians). I need to find the maximum and minimum space in the picture, check o
-
800b0100 Code was published after a Windows Update failed... help!
Often this error code appears when the Windows update fails... it does more often than otherwise. The Windows Update is marked as "Important", but if it fails most of the time, I just wonder HOW important it is... Any comments will be greatly apprec
-
What Internet connection is used?
When the laptop has 2 active Internet connections: a wireless and Ethernet via a second cable which connection is being used by Windows? /JAS