Vista - after the installation of the updates I lose Aero

Similar Questions

• Very slow download after the update February 10

  After the update automated around Feb 10th, photos are slowly and web video a crawl - for every one second of game-playing, it hangs for 10 seconds or more.

  Download Adobe software update takes forever - about 10 kb/s or less. Everything slowed to a crawl.  What is going on?

  I have a DELL reconditioned with XP and a custom-built Q8900 Intel Vista and it happens on both machines.

  I think of restoring to the point of pre-2/10 but do not want to be vulnerable.  Any person with knowledge or patch fix, feel free to post... help!

  johnnydj,
  After testing mode safe mode with networking, I suggest that you make sure that your NETWORK card drivers are up to date.  You can also see if there is a firmware upgrade for the router you have.  Alternatively, you can perform a clean boot to see if other software can interfere with your system.  Also, make sure that your security software is up-to-date.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the updates of windows, the computer stops responding with a black screen at startup of the system

  Original title: Windows XP does not start after the update, no error message

  Has made no changes to the system, but the last thing that happened was an update of Windows security on stop.

  Now when I boot, the BIOS p.o.s.t. shows good HDs, good DVD-Rom, RAM, but Windows never starts, goes just a black screen, HDs are not accessed.

  -F8 does nothing, can't use the last known good Config or Mode safe

  -Change boot order in the BIOS to boot from the Windows XP DVD, hoping to get the recovery console, but the same thing: black screen, no attempt to spin-up DVD or HDs.

  -Removal of mobo battery to reset the CMOS, no joy.

  -Checked and re checked all connections inside.

  -Stripped devices and added one at a time, no joy.

  -Traded-in an old video card in case it was difficult to generate the higher res gfx, no joy.

  I was construction/upgrade / repair my own PC for 3 decades and can usually solve the problem and fix it myself, but this one me completely baffled.

  Any suggestions?

  Hi Cougarific,

  We recommend that you repair your Windows installation in according to method 2 of this article and check the result.
  See computer stops responding with a black screen when you start Windows XP
  

  Note: When you perform a repair installation, it restores the current installation of Windows XP to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows XP disc.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Applications no longer work after the update of the game store!

  In my Xperia SP applications do not work after the update from the game store and shows 15 times in one minute, unfortunately "Skype/social life/mcafee/chrome, etc." has stopped working while triying to open it. This problem is started, because I updated my phone in 4.3 jelly bean.

  My phone is ok now...

  I contacted the sony Xperia care and suggested a repair.

  And after repairing its great and works without a problem...

  The solution is here...

  Dear Mr. Jab,

  Greetings from support Sony Xperia.

  We sincerely regret the inconvenience.

  We appreciate the importance of your concerns and we are here for you help.
  In response to the request of ypur, we would like to inform to run the reapair software.

  The enforcement procedure to repair your Windows computers using software and application of PC Companion:

  Note! You should always back up all data before you perform a repair of software.

  1. Download PC Companion to sony and install it on your Windows computer.
  2. Turn off the phone and disconnect the computer.
  3. Open the PC Companion application.
  4. Select start under the support area.
  5. Select the software update feature, and then start.
  6. Not found phone is displayed. Select phone repair and Connect.
  7. You will receive a message on PC companion, that data will be lost if you continue.
  8. Check the box to confirm that you have understood that all personal data will be lost. And then click Next. The application prepares the update and if necessary necessary downloads data on the web.
  9. Select your phone model manually, and then click Next.
  10. Depending on the model chosen, you will need to perform a few steps for the update for PC Companion be able to update the phone software.
  11. Yet, do not plug the phone! Note! At this point, the phone must be turned off and disconnected from the computer.
  12. Connect the USB cable to the computer, not on the phone.

  13.Xperia: then just pressed the button indicated, connect the USB cable for device theXperia and keep holding and pressing the indicated key until your device update started... appears (in some cases installation drivers appears first).

  1. If you have not correctly, do the phone turns on and proceed to the next steps, drag the bottom of the convening of the notification bar.
  2. In this case, disconnect the phone from the cable, turn it off and repeat step 12.
  3. Follow the instructions on the screen. Once the repair is completed, unplug the unit and then restart the device.
  4. Click on Next. If the repair was successful, the message this device has been updated successfully is displayed.
  5. Click Finish.

  Please contact the Support of Sony Xperia.

  Looking to better serve you.

  Kind regards.

• After the updates of Windows 7 computer does not start

  I received a notice from the system Windows 7 updates have been downloaded and available for installation. I selected the installation of updates. After the updates when installed I was in charge to restart. The computer will not start at the top. It tries but stops at a blue screen with a cursor. I tried to boot into "safe mode" and get the same. I booted from my original Windows 7 disc and I went back to my restore point before the update. It appeared to restore successfully but I still get a blue screen.
  What is my next course of action? I certainly DON'T want to format the drive and start again.

  The only thing I can say is that I know that you will not like to hear.

  It is to re - install Windows 7 (do not enter the product key and uncheck the 'Activation').

  Then immediately turn off automatic updates.

  Then, go to the Microsoft Update site and only install one update at a time (make a note of the number KBXXXXXX), restart and check that you do not get the blue screen. Then download the next update and repeat the process until you either find to have installed the offending update or updates without any problem. If all goes well and the problem did not repeat, then you can activate Windows.

  If you find yourself always with the blue screen after a given Update call Microsoft and tell them. If they won't listen, then create a new post on this forum, making reference to the question of the blue screen AND the number associated with the update. Also post the number here if I can do some research on the problem.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• I had windows 7 and it has been updated to windows 10. After the update, I opened a PDF with adobe reader. The sign economy is idle. When I click on save slot, it is said that he can save a blank document. Earlier, I have not any problem to save a pdf d

  I had windows 7 and it has been updated to windows 10. After the update, I opened a PDF with adobe reader. The sign economy is idle. When I click on save slot, it is said that he can save a blank document. Earlier, I have not a problem to save a pdf document with adobe reader on my hard drive. I found no updates available for my adobe reader software. Is adobe still to make the drive compatible with windows 10?

  Govind B S

  Bernd, these rights are not necessary to the reader XI. Unless the file has been secured, then it should be savable.

  I recommend that upgrade you to the latest version of the XI player that is available and if this does not work, try to run a repair installation (or upgrade to DC).

• No function after the update of 10.2.0.1 10.2.0.5

  DBA colleagues and experts,
  
  on a test computer I've just updated a former v.10.2.01 to 10.2.05 Oracle installation using the Oracle Patch Set documentation.
  
  I use SLES 11 and installation with the YES seemed fine except for a few mistakes, I could not avoid.
  
  These are for example as:
  
  Error in invoking target 'client_sharedlib' of makefile ' /u01/app/oracle/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk
  
  
  
  The major problem that I have after the update is that I can not start the listener or sqlplus.
  
  All these files could not be created due to an error?
  
  Do you have any tips for me that I could do to get the system running? How can I overcome these mistakes makefile?
  I'm stuck with no ideas for now!
  
  Any help is greatly appreciated!
  
  Best regards
  
  Sebastian
  
  Edited by: skahlert the 02.05.2011 12:38

  skahlert wrote:
  I just make sure we have an i686 architecture. That is x 86 (32 bit) Suse Linux Enterprise Server 11!

  I think that the I downloaded the package should be correct, since it is: 10g Release 2 (10.2.0.5) Patch Set 4 for Linux x 86-64

  If you have a 32-bit computer, then you cannot run 64-bit software!

  Probably, you need get the patch for the platform Linux 'x 86 '.

  Previous upgrade attempt may require back for example retrieve via the backup.

• Mac stops do not after the update of the sierra

  I've updated my MacBook Air (13 inches early 2015) to Sierra. After the update, it is not shut down or restart. If I click on stop, my screen goes black and the keyboard backlight is on. The judgment never ends. Its the same case on reboot too.

  Help, please. Thank you.

  Although this will help, but I have also reported this problem, like many other people:

  MacBook Air shutdown correctly

  macOS Sierra presents a serious problem that must be dealt with quickly

  Apple should give a direct response to this because it is obviously not an isolated incident.

• unusual warm-up and drainage of battery fast after the update for sierra

  everyone knows unusual warm up their MacBook pro and the draining of battery faster after the update to Mac OS sierra?

  my MacBook 2015 mid pro gets hot when I close the screen and put it to sleep, as well as drainage of battery faster than usual. everyone knows the same?

  Try to use the activity monitor to see where will your battery life.

  1. go to the docking station
  2. Click on finder
  3. Click the menu go
  4. Choose utility
  5. Double-click activity monitor
  6. Click the stack tab

  See you using your battery?

• IPad no charging current after the update to IOS 10, when connected to the laptop.

  My Ipad no charging current after the update to IOS 10, when connected to the laptop. But fine load with Bank charger or battery with the same cable brightening.

  PL suggest how to overcome this problem.

  Have a look here If your iPhone, iPad or iPod touch won't charge - Apple Support

• Delete buttons do not work after the update of 10.11.16.

  Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

  Any suggestion would be appreciated.

  Greetings, r.fromstouffville!

  It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

  Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

  Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

  How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

  Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

  On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

  Thank you for the communities of Apple Support!

• I can't create new events after the update to thunderbird SOLVED 38.3.0: timetable has been set to read-only

  Thunderbird running on the latest Mac OS. After the update to thunderbird at 38.3.0, I can create is more new events on my calendar (4.0.3 Lightning). I can see the "New event" selection when I click right on the screen of the calendar - but is greyed out and unselectable. Any help will be appreciated.

  Make sure that your calendar is not unalterable.
  Right click on the calendar in the left pane - properties

• After the update the new version cannot determine file downloads. In the eyes to determine the file, but download files go in C / documents and settings even

  After the update the new version cannot determine file downloads. In the eyes to determine the file, but download files go in C / documents and settings even if I chose another folder

  Hello, there is a general regression in firefox 27 allowing any files to upload directly to a root drive. Please try to create a subfolder (like D:\Downloads) and set as the default location for downloads...

  See also bug #958899.

• There were add - it and I lost it after the update and I don't remember his name

  There were add - it and I lost it after the update and I don't remember his name
  This is the module to show me the source of any content capable of click
  like the pictures on twitter or Facebook
  also videos on youtube
  and he showed a small icons with form of small pic on it with different colors
  and also sometimes in the form of small lock on it

  now I need to know what this add - on the name or how to get it back

  It seems that this extension:

  • https://addons.Mozilla.org/en-us/Firefox/addon/redirectbypasser/

  

• After the update to firefox 17.0 when I do a scan with Norton 360 it does not pick up the tracking cookies which changed 16.0.02

  After the update to firefox 17.0 when I do a scan with Norton 360, it is no longer captures the rejected. These cookies that have been picked up with firefox 16.0.02 what you have changed? Plus, I'm getting sick of these updates - at least we tell users what has changed in new versions.

  First of all, we do not say what has changed in each version, http://www.mozilla.org/en-US/firefox/17.0/releasenotes/.

  Secondly, Norton should always be able to delete your cookies (just so that you know that the cookies are generally harmless, and you don't need to worry to remove). If not, you can delete the cookies in Firefox Cookies - Information that Web sites store on your computer