Vista and Color Laserjet 5 M reprints all when the printer is turned on?

Similar Questions

• HP Color LaserJet 9500 - stapling feature missing in the printer driver Uviversal

  Hello everyone,

  We use a Color LaserJet 9500 in an enterprise environment. He had a hardware failure, our service partner repaired. Since then, the stapling function is missing from the universal printer driver. On the machine itself, we are able to use the stapler, but not on our PC.

  You can see from the attached images, official stapling is visible on screen captures, but on our machines, stapling is missing.

  How we miss?

  Thanks in advance!

  Paul of Hungary

  Don't know where on your driver, but he should be a tab like device settings on this tab will be a section called installable options and in this section that you will need to change the clip in not installed not installed. Most likely, the driver was reinstalled and the default probably isn't for the stapler unit. You must go to the folder of your printer and right click on the printer icon and then scroll the first properties if more than one and then left click and find the tab that has the installable options. Good luck.

• Color Laserjet MFP M177fw Pro: Cold Reset the printer

  What is the procedure for a cold reset / factory default for the HP Color Laserjet PRO M177fw MFP printer

  Hi @SkySoldier ,

  I see by your post you want than the reset of the printer. I'd love to help you.

  I can send you this information in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If you appreciate my efforts, please click on the button below the thumbs up. If there is anything else I can help you, let me know.

  Have a nice weekend!
  Thank you.

• HP color laserjet 2605 Error error restart when you print the document

  HP color laserjet 2605 error restart when you print the document, please give me a solution?

  Apparently, there are no other problems to format, I was forced to replace it with a new one, finally hp color laserjet 2605 printer I had to walk normally.

  I hope that the discussion can be useful for each of them, thank you

• color laserjet MFP M177: error message when you try to print

  Hello

  I have a HP Color laserjet MFP M177.  I can't print I get an error message on my computer screen. No messeage shows up on the printer.  I have recently upgraded to windows 10 (I do not know what version) If this could have something to do with it?

  Help, please

  Thank you

  Hi @Daisy001,

  Welcome to the Forums of HP Support! I see by your post that you can't print, since the upgrade to Windows 10. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  If you have not completely uninstall and reinstall the driver, I would say to start it there first. Here is the link to the latest drivers: Color_LJPro_MFP_M177_full - solution_15188.exe

  If the problem persists, you can download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

  Please let me know the results and if there is anything else I can help you. Thank you.

• Photosmart 7520 e all-in-one printer not turn on, green transformer upward and then turns off.

  7520 E Photosmart all-in-one printer not turn, transformer green light comes on then off again once, unplug the left and I tried once again even.

  nothing is dead.

  Hi woldtopper,

  I understand your Photosmart 7520 is not turning on and will remain lit. Please follow the steps in troubleshooting in the following document; The HP printer will not be running or to respond when the power button is pressed.

  If the problem persists, I recommend calling HP and let know, the issue and the steps you have already performed. It may be able to let them know that you completed all the steps in the HP document #c01321436.

  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  I hope this helps.

• J611 3050 has installed on Vista and works very well. Installed on Windows 7 and said always the printer is turned off.

  My Deskjet 3050 a J611 is installed on Vista and it works fine. I then installed on a Windows 7 and the installation went well. No error message came, but when I try to print nothing happens, it just sits in the queue. When I run the diagnostic windows to solve the problem it says the printer is turned off. But it's not far, I can print the Vista machine.

  Download and run this utility on the Win 7 machine: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• Bought Adobe CC today. More apps for how I can use outside of photoshop, illustrator and indesign. Can I use all of the applications listed in the membership fees charged per month? Or will be charged extra?

  Bought Adobe CC today. More apps for how I can use outside of photoshop, illustrator and indesign. Can I use all of the applications listed in the membership fees charged per month? Or will be charged extra?

  Cloud Plans https://creative.adobe.com/plans

  - and conditions for subscription http://www.adobe.com/misc/subscription_terms.html

  -what is in the whole cloud http://www.adobe.com/creativecloud/catalog/desktop.html

• HP laserjet 1022 does not wait for the user to turn the pages when printing double-sided

  My Hp laserjet 1022 printer working properly for years.

  So far, when he executed more paper he tried a couple of times to get more paper and then stops with a message on the PC it is out of paper.

  Very annoyingly, this has changed recently, now when it is out of paper, he tries a couple of times to get more paper and watch the message on the PC, saying that it is paper and then again, try a couple of times to get more paper and again shows the same message on the PC and him back... This continues to go on and on.

  It's especially annoying when trying to print double-sided. Before he used to stop and ask you to turn the pages to print the other side. Now the previous behavior overrides the break to turn the pages and keeps it will try to get more paper. As now, it does not wait for the user to turn the pages, in general it spoils the impression out by getting another paper that is not what I wanted, he drives me crazy! It's really hard to print anything double face now.

  All solutions?

  Operating system is Windows 7, I just downloaded and installed the latest driver for this printer "2013-01-09, Version: 20120918" and I get the same behavior. In the properties of the printer that I put some State Messages to Off and at least I don't get the full windows message screen poping up every time the printer is trying again to get more paper. I have not found all the other parameters that may affect this behavior.

  Help!

  Hello

  I solved the problem! I found the original CD for the printer. I uninstall the current driver and then install CD and now when the printer is out of paper trying to get paper a couple of times and then stops, as it used to be.

  Thanks for your help.

  Martin

• Microsoft ON essential to keep all the time automatically, when the PC is turned OFF? I don't know to do.

  Dear Sir/Mam...

  I installed Microsoft essential to protect my notebook of virus & spy ware. When I turn off my laptop sound off automatically. Please send me the details to keep essential Microsoft on all the time, even my laptop is OFF please. Icon for turn on essential Microsoft whenever I start my computer. I can't find the related parameters in the ICONS.

  Once a computer is turned off, it's... Well well, off the coast.  But not just asleep, off.  By the definition of 'off' it does nothing.  Microsoft Security Essentials is a program and only works when the computer is turned on, as all of your other programs.  You cannot run a program when the computer is turned off.  The good news is that a computer is turned off is completely protected against malware are malicious software programs and does not work either.  There is absolutely no need to have anything by protecting your computer when it is turned off.  That said, I think that your concern doesn't really MSE all the time, but that's automatically done already when you turn on your laptop.  Not to worry.

  You see the pop-up warning that MSE has not yet started Microsoft.  If you click on the Start button in the pop - up notification MSE should start (but not immediately).  It may take a minute or two.  If you wait just MSE must start with itself and the notice will go away without having to do anything.

  I see the same thing when I run one of my virtual machines that you see when you start your laptop.  I'm very familiar with it.  It goes away in a few minutes and only means that from MSE wasn't the first thing the computer did when I turned on.  Windows moves to finally start MSE, but you can the long hurry up if you want.

  To manually start Microsoft Security Essentials, find its icon on the lower right side of your taskbar (called the "notification area").  The icon looks like a Red House with an X on it.  Right-click on the icon and choose open on the pop up list.  The MSE window opens on the desktop.  Click on "Start it now" button in the window that appears.  The window fades.  It may take a little time to start the MSE.  When everything is OK, home in the notification area icon will turn green with a check mark.

  When I see the Red House, I usually just give the computer a few minutes to complete marketing and the problem goes away on its own.  On rare occasions I start MSE myself.

  Colin Barnhorst

• When the printer prints white sheets of paper with HP monofunctional and multifunction printers

  Click here to see a detailed description of what to do with the following systems when the printer prints white sheets of paper with HP monofunctional and multifunction printers.

  Windows XP
  Windows Vista
  Windows 7
  Mac OS X

  Click on the laurels on the left side to help and click on accept as Solution to a solution. I work for HP.

  Best regards
  Kenneth

  I hope this helps!

• Color Laserjet Pro M177fw MFP: HP Color Laserjet M177fw MFP Pro cool mood after printing all pages.

  I bought Color Laserjet MFP M177fw Pro for only 3 days. From the beginning he said impression... mood of cooldown and take a long paus. This issue takes place after printing each page. I use HP Toners. And my related directly to the wall socket (Electric).

  Please help me. It is urgent for me.

  Thanks in advance.

  Hi Ryans,

  Please check private Message

  I hope this helps you!

  +++ Say thank you by clicking on the star of congratulations in the post.

  Although I am an employee of HP, I speak for myself and not for HP.

• Series of printer HP Color LaserJet 2840: not able to configure the functionality of SCAN to e-mail or a folder

  Have a series of HP Color LaserJet 2840 printer on a local subnet for home with two computers that share.

  We can make regular features print very well.

  We cannot get the SCAN function to work for the scan to e-mail or in a folder.

  Went and used the HP Toolbox to set options analysis, but for some reason, they are not taken.

  The Guide of the user for this problem are usless (as usual with the documents of the user).

  I have spend too much time on this seemingly simple question, as usual.  (months of work on this periodically)

  I'm sure that's not that hard to implement.

  Can you please help or advise.

  Additional information:

  2 computers on the subnet local via 100MB ethernet switch and router (basic stuff)

  No problem of communication to the printer for print jobs or check on other orders of status.

  Some scanning configuration problems.

  Two client computers are running Windows Vista Home Premium SP1 32-bit

  I want to set up the printer so I can scan from the printer directly to a folder on the machine either or e-mail to each machine.

  I do the steps correctly, from what I can tell, but the info is not required or sent to the printer. ?

  If I add an e-mail through the box to tools, I can fill in the email field and the name field, but it will not show when I hit Add.

  Besides which should represent the box 'Host '?  The printer or my personal computer?

  If I try to add a file, it displays a browse box but never lets me select a folder to scan to?

  I don't understand.  Shouldn't be this embarrassing.  And if it is, (as usual), the stupid tech docs should do a better job MUUCCHH through it.  In fact, they don't even show or talk about the Host column.  So what is this for.

  Help, please...

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a printer. You can do so at http://h30499.www3.hp.com/hpeb/

  I hope this helps.

• Color Laserjet 5550dtn: slow down communication with the configuration of the printer

  My Color Laserjet 5550dtn suddenly lost the capacity of its network - as evidenced by the disappearance of the network address in the printer display panel.   I replaced the jetdirect 615n card, and I could then access the installation of I/O again and set the address of the printer that it had before (192.168.1.106)

  The printer seems to work OK, but when I try to access the printer via my browser, using its address, screens appear, but after a very long delay - sometimes up to two or three minutes.   Similar delays occur every time I have change the Access tab.

  I put the mask 255.255.255.0, and the DNS server on 192.168.1.1 (the address of the router system) and have disabled other protocols except TCP/IP.

  I don't remember the exact settings I had before, so is there anything else I may have missed that causes this extremely slow response?

  Any help would be appreciated

  Sorry for not answering before, but my wife is damaged the problems of column vertebral too take precedence over all the rest for a while.

  I started to have more problems, leading to no communication via the ethernet card at all and only work with USB connection.   I bit the bullet and bought another printer of opportunity - without the cartridges of ink, which works very well, and commicates quickly to local net address.

  I saved some of the components of the old machine, so the expense was not so bad really.

  The original machine was always a little suspicious, but it was also used, maybe, I had a bad Control Board.

  Thanks for the useful suggestions.

• Printer HP CP1215 Color Laserjet will reverse only upward when both sides feel

  Recently, I replaced my old Dell XP PC with a new Zoostorm W7x64 Professional OS PC and transferred my HP printer which worked perfectly the new system.  I followed all instructions to update the software and drivers, but now the printer will reverse only upward flanked of printing page even if I chose flip over as my print mode.  I tried the flip up instruction also and it works as it should.  Can I use is no longer my instruction to print two face now that I can't print reports that reads like a book otherwise that manually adjust the paper in the tray.  All solutions, anyone?

  Hi artable ,

  Welcome to the HP Forums.

  I see that you have problems with printing on both sides paper to flip on parameters does not.
  I'll be happy to help you.

  Which driver you have to download and install?

  I download, save and then run the full feature software and drivers if you have installed the Plug-and-Play package to see if that will solve this problem.

  HP Color LaserJet Full Feature software and drivers.

  You change the preference of the printer in the application or in the printer properties window?

  Try another application to see if you have the same problem.

  Please let me know the results.

  Thanks for posting on the HP Forums.
  Have a great day.