Vista backup does not - restore error 0x8100001A

Similar Questions

• Vista backup does not work

  When I try to use the backup, I get the message "backup stopped working, if a solution is found, you will be notified by Microsoft.

  Hello azshtr,

  You make a partial backup or a full backup? Your backup has already worked?
  If only making one partial, try a full backup to a different location and see if it ends.

  See the following for FAQ on using Windows Vista backup and restore.
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Please try again and answer back with an updated status.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Vista updates does not download error messaages

  I have an automatic update for the basics of Home Windows Vista 32bits KB972036 it will not update, comes up with error code 80004005, Ive, disk cleanup is checked all attempted repeatedly to download because it tells me to try, restarted computer x 3 still will not download and told me there is an update that needs to be downloaded , what can I please.

  Hi Whoppee,

  Thank you for writing to Microsoft answers Community Forums.

  Follow the steps below. It could help us solve the problem of update on your computer.

  1 restart the computer in safe mode (to restart in mode safe keep pressing F8 on reboot).

  2. click on the start menu and in the search box start type CMD.

  3. in the list right click on CMD, and then click Run as administrator.

  4. at the command prompt, type net stop cryptsvc.

  5 rename C:\windows\System32\Catroot2 Catroot2.old.

  6 open the C:\windows folder, and then rename the folder C:\Windows\SoftwareDistribution as SoftwareDistribution.old.

  7. at the command prompt, type net start cryptsvc, and press enter

  8 restart the computer in normal mode

  9. run updates and check if you are able to get the updates without any error.

  You can also try the following article below and run fixit to reset the Windows Update components.
  http://support.Microsoft.com/default.aspx/KB/971058

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Vista window does not start error 0 x 80004005 and is unable to initialize msoe.dll

  Mail window stop working last week.  At startup, I got error 0 x 80004005 then failed to initialize msoe.dll.  This can be corrected?

  Hello

  You will remember to do recent changes on the computer before this problem?

  I suggest you follow the steps mentioned below:

  Method 1:

  You can reconfigure Windows mail and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-Windows-mail-account

  Method 2:

  If the previous step fails run the System File Checker tool to troubleshoot missing or corrupted system files.  Follow the steps in the link:

  http://support.Microsoft.com/kb/929833

  Method 3:

  If the previous step fails, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  For your reference, take a look at the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

• Vista SP2 does not install, error code 800f0900 and KB947366 does not correct.

  I tried everything above, and nothing works, please help.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

  Original title: windows updates 7

  Updates to the computer have been OK until MS net framework has been improved from 3.5.1 to Ms. Net framework 4 who do not go in. several attempts have been made to install but still got error codes. . Since then, updates only install are removals of malware. Silverlight will not install either.    Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

  I am at a loss... Anly help would be welcome.

  1. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder.
  2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow.

  Press enter

  3. open Control Panel > Windows Update and Windows 10 should begin to download...

  If this does not work:

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• I phone 5 does not restore

  In my phone I 5 it does not restore watch type of error, please give me solution for this... ???

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• Windows backup does not complete

  Same as above

  every other day I get a msg on my windows backup does not complete. What's wrong? I have inserted SEVERAL CD and it never seems to have solved! What should I do?

  Hello
  • What type of files are you trying to backup?
  • What version of the Windows operating system do you use?
  • You receive an error code?
   
  Do not include the libraries while safeguarding and then check what is happening.
   
  Here are some articles that you can consider moving by before starting the backup.
   
  Back up your files
  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files
   
  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions
   
  Back up your programs, files and system settings
  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-programs-system-settings-and-files
   
  Should what backup settings I use to maximize my disk space?
  http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space
   
   
  Post back with the State for additional troubleshooting steps.

• Firefox 34 does not restore the previous when tabs restart

  Hello

  After that I updated to 34.0 FF, whenever I restart my FF, it does not restore the Forelegs. Instead, he opened all my home pages.

  I went to look in the history and all the following features are grayed out: tabs to other devices; Restore previous Session; Recently closed tabs and windows recently closed.

  I went to my profile folder and found the "sessionstore-backups" folder and in it, there are two files: recovery.bak and recovery.js, both showed the latest date and time. And there is no file "sessionstore" anywhere in the profile folder.

  My question is: why are all the options under history is grayed out? I used the "Undo Close Tab" modules, but it does not work. When I click on the shortcut menu, nothing happens.

  I searched on this forum about this issue, but none of the solutions worked for me.

  Suggestions or comments are much appreciated. Thank you.

  OK, here's my latest:

  I created a new profile, copy ALL the folders and files from my old profile into it. So I delete all the files except the last one pref.js. Start FF with the new profile, guess what, everything is back to what is supposed to be.

  1 restore previous Session and recently closed tabs both work now on the history tab.
  2. I can connect to all my accounts from Chase, without using IE Tab.
  3 file and release working again.

  So, it seems that all the old files pref.js were the culprits here.

  Thanks to FredMcD and cor - el for all of your kind cooperation.

• Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work. What should I do?

  Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work.  What should I do?

  Hello

  You get no matter what error code or error message?

  There seems to be a problem with the file missing in the rear disc system. I suggest you to refer to the following Microsoft article and check if it helps.

  Flight Simulator 2004: known video issues: http://support.microsoft.com/kb/823628

  If the steps in the Microsoft article mentioned above do not help, then it would be best to ask your question in the Microsoft Game support forum.

  Microsoft Flight Simulator Games Forum: http://www.fsinsider.com/

  Or contact support for Microsoft Flight Simulator game: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Hope the information is useful.

• Vista SP2 does not updated Windows because the Windows Modules Installer (Trustedinstaller.exe) crashing

  Hello.
  My laptop Vista SP2 does not have Windows updates due to the Windows Modules Installer (Trustedinstaller.exe) crashing:

  Error message:
  "Signing of the problem:
  Problem event name: APPCRASH
  Application name: TrustedInstaller.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01af1
  Fault Module name: wcp.dll
  Fault Module Version: 6.0.6002.18005
  Timestamp of Module error: 49e0380e
  Exception code: 80000003
  Exception offset: 0013b 972
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 2057
  Additional information 1: fcbe
  More information 2: 21dec0ca93c87c4af4036e2c4a4d224a
  3 more information: 93a 4
  "Additional information 4: 172cbe47bfd87945783d7b08d7f02897.

  Update history shows a number of updates that haved 'impossible' to install accordingly.
  Any ideas how to solve this problem for all my PC install Windows updates pending?

  Thank you very much!

  Hi Spoon579,

  Jose is correct that we need more information. Without any information only generic suggestions that we can supply to run SFC/scannow here or CheckSUR here

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• System Restore: what point I choose theactionalways does not restore complete

  What point I choose theactionalways does not restore complete

  Try to restore the system in Safe Mode.

  Shut down your pc (if you can't for some reason any then press and hold in the power switch until the pc shurs)

  Now start pc you and start immediately to press the key F8.

  you will be presented with a new screen where you can choose Safe mode (use the arrow keys on your keyboard to navigate through the screen)

  Now restore your system.

  * Very often Norton users have problems, perform a system restore, an error of "restoration incomplete... your computer can not be restored"would be seen after trying a restore point. " New versions of Norton have a setting where you can uncheck/disable 'symprotect anti-forgery protection. " ... older versions have "enable protection for my Symantec product." ... Uncheckiing should be temporarily. Unchecking these settings would mean you wouldn't need to go into safe mode to try the restore.

  More information here;

  http://bertk.MVPs.org/html/symantecdoc1.html

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• on windows xp, my system restore to a previous restore point. have you tried many restore points & creating new ones but the system does not restore. all the solutions out there?

  on windows xp that my system restore to a previous restore point, I tried many restore points & created new ones but the system displays "could not be restored", any help out there.

  Let see... What do we know about your system environment:

  It's windows xp.

  If we knew more, you would probably now.

  What is the problem that you are experiencing this thing you System Restore will be remedied?  System Restore is not a time machine.

  The system restore already worked successfully in the past?

  Thank you MS Answers, allowing the resolution of simple problems like frustrating and a lot of time as possible by asking only not for any information system when a new question is asked.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.