Vista boot failure will not be access to resettlement of recovery discs or the factory
1 day after the update to the latest version of Firefox, computer don't boot, recovery and reinstall disks spin for a while, nothing happens
If nothing ever appears on screen, he points to him being a hardware problem and the rest is maybe bad timing.
See you soon.
Tags: Windows
Similar Questions
-
Whenever I try to open a program on a standard user account, a window opens asking "what program you want to use to open this with?", which is of course less useless. I can open all programs with the administrator account, but then I can't access files of the standard user... What happened all of a sudden; We had a malware infection that is now deleted and who may well have caused the problem. If I use the system restore, the malware will return? Prefer not to use SR if there is a better solution...
Hello
Method 1: Run the fixit available in the link below
Difficulty of the shortcuts of broken office with common system maintenance tasks http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us
Method 2: Follow the steps described in the article below and then check out
When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
http://support.Microsoft.com/kb/950505
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
How to back up and restore the registry in WindowsIf the problem persists, the user account may be corrupted
Method 3: Follow the steps mentioned in the link below to fix the corrupted user profile
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile -
Aspire E-531 boots but Windows 8 will not load. I need to get back to the factory settings
I don't have the D2D option in BIOS > hand - so I can't activate it :-)
and go to F10 when booting has no effect.
When I look at the disk (on the computer) I see drives C: and RECOVERY (Y)
so I was wondering what to do next?
Thanks, I tried this method of "brute force" by running GParted - but there is 'no screen available' when GParted loaded (!), so I couldn't go any further
However trying the different (Legacy vs UEFI) BIOS settings I had the D2D option to appear.
After you have enabled the option and AltF10 I entered a custom screen set - must be the entity "Windows Boot Manager" with - and I have the options to restore the computer. FACT!
My first brush with UEFI... Thank you
-
Vista boot failure:
When you start there 3 beeps (long, short), and nothing, the screen remains black, empty. With Windows Vista Ultimate install the disk in the DVD player, nothing else.Pre-existed freezups usb input, but only after connection, so used safe mode system restore and went back to an earlier version, which worked for a short while before the same problem reappeared. Tried to reboot with the installation of the system disk, it almost worked, in vain. Now I'm in the first situation described. All hope?
Hello
"beep" codes normally indicate a hardware problem / failure.
Read this on the 'beep' error codes:
http://www.computerhope.com/beep.htm
http://www.pchell.com/hardware/beepcodes.shtml
http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm
Check out the Bios in your computer starting information online from the manufacturer of your computer and use the links that I you provided with to see what mean "beeps".
If you are unable to determine the hardware problem yourself, contact the manufacturer of the computer, if under warranty.
If it is not under warranty, find a good repair shop premises to take.
See you soon.
-
AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL
Follow these steps to try to solve your problems of boot.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Windows vista Media Center will not download the latest options for my region. It is under the TV signal, TV download
configuration options. When I finally get through all the steps I get only 1 station with a signal strong enough. I was able to get much more than that in the past.Hello
I suggest you to follow the steps in this link and check if it helps:
Check if that helps.
-
I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success. Help, please!
There are two different versions of Flash. ActiveX for IE version and the version of the Plugin for other browsers. Have you installed the correct version? This forum software is not thing that Flash is installed for Firefox or the Plugin is disabled.
1. download the file of configuration Flash from here:
Adobe Flash - Plugin version.
Save it to your desktop.2. close Firefox using file > exit
Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
{XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}3. then run the Flash configuration from your desktop file.
4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/
- On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).
See this:
http://vistasupport.MVPs.org/run_as_administrator.htm -
I'm currently developing the feature keys on my MacBook. In the process, he asked that I enter a code sent by message to a phone number (only the 2 last digits are revealed) that I do not have access to. How can I fill the activation?
See "change how the new features can be approved" here:
OS X Yosemite: Configure iCloud keychain
As you can see, this allows you to change the phone number.
-
iOS 9.3 will not load because you are no longer connected to the internet
iOS 9.3 will not load because you are no longer connected to the internet on my phone 5
Apple has temporarily removed the update due to activation problems then you won't be able to update at this time.
-
iPhone 6 s more. The music will not play an entire album. Just of repetitions the first track. How can I get it to play all tracks in order?
In-app music, press the "mini player" (the narrow ribbon at the bottom showing the song that is playing). Which opens upward from the view of work full screen of the song being played - down at the bottom of this screen are icons for shuffle and repeat, press Repeat until the gray background disappears.
-
Siri will not stop me give a military even if time the "time of 24 hours' has been disabled in my settings. How do I change AM/PM?
What you have for country & region and what default language.
-
My Gateway FX6831-03 will not be able to start Windows. Just shows the gateway splash screen, then freezes. OS is updated to current MS Win7-64 bit-w/all and virus/malware protection., Went over 4 days vacation, and when I tried to turn it on, it should display the gateway splash screen, then stop. can't hear anything that happens on the inside.
Problem solved! An external hard drive, powered by a separate power supply, was not turned on, but it was plugged into a USB port. When the computer "seen" this cross-town 'dead', he just stop - but no message appears problem.
The good part? Vaced out all the dust and replace the bios battery. [I'm good for at least another 2 years;-]
-
Original tile: Mp3 player will not charge
All of a sudden when I plug my MP3 into the usb port, the computer does not recognize the device. It will not load and transfer of content said to connect the unit and it is already plugged. The player will load on another computer. The mouse that is connected works very well. Help!
Hi LaurajmWR,
Good to know that you are able to resolve the issue and thank you for sharing the information.
-
My computer crashed and I reinstall first elements 7, but it will not recognize my serial number there are two on the CD case please help
When you ask a question you will need to provide some basic information
Mac or Windows and EXACTLY what version of the operating system?
Recent Mac AND Windows operating systems have been known to cause problems "weird."
Lost information - response #1 in https://forums.adobe.com/thread/2008767
Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
-http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html
-
Installation of fuse will not start and I can't find it in the application of the CC.
Installation of fuse will not start and I can't find it in the application of the CC
Great!
You are welcome!
P.S. If you use the Adobe forums, please check useful/correct responses from the staff/helper, if there is.
Maybe you are looking for
-
Cannot start from the CD in my Satellite P300-23F
Hello I'm trying to fix the old laptop from my brother. It's a Toshiba satellite p300-23f. The laptop did not work well, so he bought another. I think he might have a problem with the HARD drive, but I'm not sure about this and want to try to format
-
Camileo SX900 photo very noisy
Hello I just buyed a SX900 camcorder. All right, next to the fact of the camera specifications seems very noisy even in daylight on a room lit not so high... I'we used both level ISO Auto or manual (like 800) with or without LED activated. Is it norm
-
Windows Media Center w/Windows 7 & cards TV AVerMedia H339 fails SetUp
I have a new Dell XPS L701X with the AVerMedia H339 hybrid analog/ATSC/QAM TV Card, driver 2.2.64.69 version... I've linked the antennea embedded ear rabbits which found several digital channels, but none with a signal strength above 2 bars, not enou
-
It seems every other day or so, if I look at my Start button, there is a flag and the note 'download' updates and stop. Sometimes, I would like to know what are the updates, most of the time I'm not particularly excited about stopping. When I click
-
Z-3 blackBerry 10 after update 10.3
HelloI recently updated my Z3 to 10.3 and I am facing some problems.I can't install apps in the app world, it gives me the error that please remove the existing application.I can't access the amazon AppStore, it will stop automatically after the acce