Vista - can not stable KB2416447

Similar Questions

• vISTA can NOT DETECT THE READER of CD/DVD,

  WINDOWS VISTA cannot DETECT THE CD PLAYER, ONCE CHECK IN DEVICE MANAGER, the PROPERTIES THE SHOWS "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». How can I get the DIFFICULTY of THIS PROBLEM?

  Thank you

  Hello

  Code 39 means that the driver is corrupted or missing.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot start Adobe Muse "Manager of Application is needed", but I can not stable it, just bought a license for a year in adobe muse :(

  Hello, always that I close and then try to open the muse of adobe, I got an error that says that I need the "Application Manager" to start, so I went to download. After I entered the page it offers (www.adobe.com/go/applicationmanager_es) it is said that if I am already a member of creative cloud that I should follow a ling this as, which redirects me to download the creative cloud app. OK so I have download and installed and it works at first, but when I close Adobe Muse, the error happens again, so I went directly to the Download Manager application, but when I install it another error appears and says that it can not be installed, that I need to download Adobe Support Advisor... ok, so I went to download , but I just went to see that the application was abandoned... I have had this problem since I installed Adobe Muse, I just uninstalled creative cloud and then reinstall it (took me about 30 mins. or more)... but I want to do that whenever I need to use the muse from adobe, these errors should not happen I was so excited because I'm muse adobe... Here are a few screens

  

  Information on my laptop:

  

  Thanks guys, I really hope that someone can help me, I'm just a biggener and I like this Muse of Adobe

  Hello, I have tryied and now it works, I don't have to open the Task Manager to start adobe muse more, I think both solutions do that works, thanks for the two i'm so thankful

• Vista can not download updates?

  Whenever I have disable my computer and Vista tries to update before you stop, OR when I go to the windows update area when it stops not and try to get it to update, it is stuck at 0% and does nothing. When I try to do stop updating in the center of update after awhile because it obviously doesn't work, it tells me that I must have the permission of the administrator so he can stop. But my account is the only one on the computer! What should I do so that it can be updated?

  If I did not provide enough information, please let me know.

  Hello superkirby93,

  Thank you for using the Microsoft Answers forum.  Please, use the methods below to help you:

  Method 1
   
   
  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:
   
  1. on the ""Start " menu, click on"run:.
   
  2. in the ""Open " box, type"msiexec /unreg"and press ENTER."
   
  "3" "Start" menu, click on "run".
   
  4. in the ""Open " box, type"msiexec/regserver"and press ENTER."
   
   
  Method 2
   
   
  Upgrade to Windows Installer version 2 or newer version. To do this, follow these steps:
   
  1. start Microsoft Internet Explorer and then search the Microsoft Web site at the following address:
   
  http://msdn.Microsoft.com/downloads
   
  ' 2. in the menu tree in the left pane, click on ""installation and Administration of system ", then click on"Setup ".
   
  3. click on "Windows Installer ', then click on the link for your operating system.
   
  4. click on ""download ' to download and install Windows Installer version 2 or newer version. "

  Link to other methods.

  http://support.Microsoft.com/default.aspx/KB/555175

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista - can not search for new updates

  My last update on Windows Vista has been 25/02/2010...  I clck on Windows update and it tries but came back with WINDOWS COULD NOT SEARCH for NEW UPDATES.

  I disabled the result of nada firewall nwith.  WIndows Defender has been the last updated 25/2/1010

  Hi clamouring.

  In addition to what Jose was advised to do, try to run the tool components reset Windows Update:
  http://support.Microsoft.com/kb/971058

  If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista can not close properly

  Hello

  Every time when I shut down my computer, I click the close button and let alone. However, when I go back to the computer after a certain time, it is always on. He said shutting down and there is no way I can turn off except in order to cut the current that is not recommended. Can someone help me please?

  Thank you.

  Wen Xin

  Hello

   
   
  1. Since when are you facing this problem?
  2. you remember any changes made to the computer before the show?
   
  Method 1:
  
  Step 1:
   
  I suggest you to search for the problem in safe mode and see if it works. See the following link for more help.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step 2:
  If the problem does not persist in safe mode, and then try to perform the clean boot on the computer and check if it helps.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
   
  http://support.Microsoft.com/kb/929135
    
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
   
   
  Method 2:
   
  I also suggest you refer to the below mentioned link and check if it can help solve the problem.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
   
   
  I hope this helps.
   

• Windows (Vista) can not start because the following file is missing or corrupt: < root windows > \system32\ntoskrnl.exe

  When I start windows, the message that I get a black screen is Windows (Vista) cannot start because the file is missing or corrupt: \system32\ntoskrnl.exe. Please reinstall a copy of the above file.

  I tried to launch a system of diagnosis without a disk and everything going on. I then tried running windows in safe mode and it won't allow me. That's when I switched to an installation disc supplied with the system. I tried to recover the system from there, but it would not go beyond the option of choosing an operating system. Once I got to that screen, there was NO operating system choose.

  I tried to restore my computer and there is no restore point.

  I renounced restore my computer and thought I'll all start over and install windows vista all over again. This was not the case either. I followed these steps:

  1. Turn on your computer and insert the CD or the DVD of Windows Vista.

  2. Install Windows page, follow all of the instructions that appear, and then clickInstall now.

  3. On the Get updated important for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. On the Type your product key for activation page, we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. On the Please read the license terms page, if you agree to the terms of the license, clickI accepts the terms of the license.

  6. Follow the instructions on each page. On the type of installation do you want? page, clickCustom.

  7. On the place where you want to install Windows? page, select the partition where you want to install.

  8. Click next to begin the installation. You can see a compatibility report.

  and then had this error that says;

  windows doesn't have can create a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0x80004005.

  Now I am stuck and don't know what to do.

  Someone at - it solutions for me. Help, please.

  Hello

  1. on which the drive was initially installed OS?
  2. What partition you selected to install Windows?

  You can try to perform a startup repair by using the Vista installation disc.

  Check out these links for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions  

  How can I fix a startup (startup)?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem 

  What to do if Windows does not start correctly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly 

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista 

  If nothing helps, so please get in touch with the system manufacturer for assistance because it may be a hardware problem.

  Kind regards
  Afzal Taher - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have Windows Vista, can not connect, is the file 'another user '.

  Hi, I have Windows Vista Ultimate Edition.

  my computer restarted somehow while I was with her and now the only way I can connect is a folder named "other users". It asks me a username and password but I don't know what it will be. How can I solve this problem?

  Hello

  Try the methods here, but not exactly the same question that they should help to correct yours.

  Your files must be accessible by any ADMIN account in C:\Users if necessary to migrate
  to another account.

  -----------------------------------------------------------------------------------------------------------------

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Vista can not read CD or DVD after you connect USB/eSATA 1 TB external HARD drive

  Hello

  Can anyone help, I have had this problem since I connected an external hard drive. Vista cannot read drive, its visible in Device Manager, but has an error code 19.

  The drive works fine if I try a bootable CD/DVD.

  Have you tried the fixed charges:

  KB/314060

  KB/929461

  Kb939052

  Kb952951

  KB/316529

  GP/CD_DVD_Drive_Problems

  GP/hardware_Device_Problems

  Not that helped solve the problem.

  Would be to remove the old USB devices of assistance from the registry? How can I do this safely?

  Thank you

  Tim

  Hi Rob,

  Thanks for the son. HP do not have an update of the firmware.

  DevManView let me see all the devices that are installed.

  I disabled the device I think about the origin of the conflict, but which has not set a problem.

  I'll have to get the keys to void Current Control Set.

  Thanks for your help.

  Tim

• Vista can not read memory cards, please and get in shape.

  Hi, I have a strange problem that appeared on my laptop Sony VIAO.

  Now it will not read any memory card I use. USB flash drives, SD or MagicGate cards in the slots of the laptop, or the internal or external to a PSP memory.

  In all cases, it recognizes the drive exists, but when I try to open it I get an error "you must format the drive until you can use it."

  An exception is the CF card in my camera, which is very well read (through the camera and USB). Maybe it's because the camera is regarded as a Portable device in Vista, rather than a "device with removable storage".

  I checked all cards work fine in the other PC, and they all used to work on this laptop (i.e. it is not a problem of size of memory card). I have not found anything relevant on the net, and Vista claims that drivers are working and up to date.

  Thanks in advance for any help.

  Hi Foucalt31,

  Have you read the following article?

  http://support.Microsoft.com/kb/941996

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• photos on CD - R in Vista can not read in XP

  I burned the pictures for a total of 628 MB on a 700 MB CD - R using Vista of reading.  I used the system of active files and ISO image formats.  Nor will allow the CD - R to open on XP.  On Vista, it shows all the photos that have been copied.

  If I use the Live file format & copy only 20-25 photos on CD - R, CD opens on XP.

  Is it possible that I can avoid using so many CD to copy photos?  I'm not very known to the computer!

  I burned the pictures for a total of 628 MB on a 700 MB CD - R using Vista of reading.  I used the system of active files and ISO image formats.  Nor will allow the CD - R to open on XP.  On Vista, it shows all the photos that have been copied.

  If I use the Live file format & copy only 20-25 photos on CD - R, CD opens on XP.

  Is it possible that I can avoid using so many CD to copy photos?  I'm not very known to the computer!

  =============================================
  Perhaps you could use a memory card or a USB flash drive to transfer
  photos.

  If you insert your Vista created CD - R in the CD/DVD drive on your
  Machine XP and go to the... Start / my computer... can you right click the
  The drive letter of the drive and select Explorer? This lets it
  See the directory of the CD? Maybe you can copy and paste or drag and drop
  photos from there to a folder on your hard drive XP.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• My vista can not open files created in other forms

  I am not able to open files that are not created in word works perfectly, or has vista what ever. I can't open things in word or works that are sent to me or my teacher has on its website of the files. I learned there is something I should be able to download free to solve this problem, but I can't. I can't find user friendly microsofts site. ANY help or suggestions would be greatly appreciated. Thank you

  ·                         They may have been written in a program that you don't have on your computer to play with.

  need .doc or .docx Word or a Word Viewer for playback file extensions, etc, etc.
  .xls Excel need.
  need for .pps PowerPoint

  Here are the download links for free Microsoft Word, Excel and PowerPoint viewers:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac&displaylang=en

  Word Viewer

  View, print and copy Word documents, even if you don't have Word installed. This download is a replacement for Word Viewer 2003 and all previous Word Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

  Excel Viewer

  Open, view, and print Excel workbooks, even if you don't have Excel installed. This download is a replacement for Excel Viewer 97 and all previous Excel Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=048dc840-14e1-467D-8dca-19d2a8fd7485&displaylang=en

  PowerPoint 2007 Viewer

  Microsoft Office PowerPoint 2007 Viewer allows you to view the presentations of all the features created in PowerPoint 97 and later versions.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here is a link to a set of free office of Applications:

  http://www.OpenOffice.org/

  And to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner

• Vista - can not install a Service Pack

  trying to instaoll packs 1 and 2

  Download and install "stand-alone version of Service pack 1 and then download and install the standalone version of SP2."

  Service Pack 1: http://technet.microsoft.com/en-us/windows/bb738089

  Information about Service Pack 2 for Windows Vista and Windows Server 2008:
  http://support.Microsoft.com/kb/948465

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Method 3: Get the latest Windows Vista service pack from Microsoft Download Center
  http://support.Microsoft.com/kb/935791/#Method3

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone DVD ISO (KB948465)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9f073285-B6EF-4297-85ce-f4463d06d6cb&displaylang=en

  Learn how to install Windows Vista Service Pack 2 (SP2):
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  What is included in SP2:
  For more information on what's included in Windows Vista Service Pack 2, see the Microsoft Web site at the following address:
  http://go.Microsoft.com/fwlink/?LinkId=149623
  To view the release notes for SP2, see the Microsoft Web site at the following address:
  http://go.Microsoft.com/fwlink/?LinkId=134027
  To view a list of updates and fixes in SP2, visit the following Microsoft Web site:
  http://go.Microsoft.com/fwlink/?LinkId=134030

  What Service Pack is installed on my computer:
  Click the button start (Orb), right click on computer.
  and then click Properties. If Service Pack 2 is listed in the Windows edition section,
  then SP2 is already installed on your computer.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• What happened to vista can not copy and replace files can only merge with my outside

  Hello. I look online. I see on my last update of windows, 4-2015, when I copy my documents or I just copy a folder that was my backup external drive upgrade that copy and replace it is now gone and he only asks you if you want to merge the files. I don't want to merge my files and not happy about it. What is my old folder and what is my new. It seems that Microsoft is now trying to do more work for the user. The process used to be simple. I use my old vista computer and waiting for my new computer which has Windows 7pro.

  You had a good thing going with the copy and replace he composed easy support. Now I have a folder in a folder that is so my old and who has been my update to easily remove the old. I don't know why you guys did this. No I don't have to go into my backup and delete the folder in there, it would be too long. So, how do we change that back to use, copy and replace the product, do this for all conflicts etc.?

  Thank you for your help

  Hi, Yes, I know this is how it should work, but was funny. It's a problem with my old computer I think. I am trying the implementation of a new system and when I downloaded 'documents' on my new machine everything behaved normally and he did the right folder thing.  So it doesn't seem to be a problem with my old vista machine that goes down! In addition, I scan my external HD before download of the new machine.

  Thank you

• Transferred to the new disk, Vista can not reactivate

  Old disk OS/programs became too small, taking ages to start, so cloned drive on a great new. Everything works well except windows has reported new hardware detected, get the product key.  Again entered product key (genuine Vista Ultimate), now I get product already in use... need to buy a new key. The rest of the PC is exactly as it was. What happens here?

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) to select your "country" you are in the drop-down list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem (new disc used to replace the older and more small disc, cloned Windows) clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  What's the relationship between activation and genuine Windows?
  http://Windows.Microsoft.com/en-in/Windows7/what-s-the-relationship-between-activation-and-genuine-Windows

  What is the validation, and how does it work?
  Windows 7: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=win7
  Vista: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=winvista

  Authentic Microsoft software program privacy statement
  What data is collected?
  http://Windows.Microsoft.com/en-us/Windows/genuine/privacy-statement

  J W Stuart: http://www.pagestart.com