Vista cannot start because of accidentally deleted system files

Similar Questions

• Cannot start because of missing or damaged file: \Windows\AppPatch\drvmain.sdb.

  Everything was fine when last stopped.  Then this error message.  Cannot get to anything that will open any program or allow me to run a CD.  Cannot start because of missing or damaged file: \Windows\AppPatch\drvmain.sdb.  Cannot run CHKDSK or use reinstall the CD because there is no place to run is.  Cannot get to Norton to uninstall.  Help!

  Hello

  If we can start safe mode?

  If so, we can perform Clean Boot Troubleshooting:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  If this isn't the case, then we might need a Windows XP CD in order to move forward.

  Let us know.

  Best regards

  Matthew_Ha

• Satellite M50: Windows did not start because of a corrupted system file

  Hi all.

  I have a problem with my laptop Satellite M50. When you turn on the laptop, a message appears: "Windows did not start because the following file is missing or corrupt: \windows\system32\config\system»

  I am aware of my product recovery CD-Rom and have inserted - however, I don't want to reformat my HARD drive as I have files I back (foolishly) not upward.

  Is there another method to repair the corrupted file without having to wipe all files on the HARD drive? (I don't have an XP CD - the operating system is loaded OEM when the laptop was purchased)

  Thank you very much!

  Hello

  Hmm, using the repair console could be a good way to copy or replace the damaged or missing files on the HARD drive.
  BUT you need to start the console of Windows XP CD of original Startup Repair.
  Without this CD, you will not be able to repair the operating system. The Toshiba Recovery CD contains only image files and does not start the repair console.

  Now the question is; How to back up data.
  You can remove the HARD drive and connect it to the PC second via the external USB HARD disk controller.
  Then you should be able to copy important files on the second computer.
  After backup files you can start the installation from the recovery CD.

  Good luck

• Windows could not start because the sys32\confif\system file is missing or damaged?

  I tried chkdsk/r recovery, did not help

  You will have to do this

• Windows can't start because\windows\system32\config\system is missing

  original title; Windows cannot start because\windows\system32\config\system

  I did a system restore, and when he went to restart blue screen came to say windows didn't start because he would cause damage. Then I went to Advanced menu and it does not start even with safe mode. but it says that \windows\system32\config\system\ is missing... Help, please

  Hi jerijenks,

  · What is the number and the model of the computer?

  · The operating system comes preinstalled on the computer?

  · What is the service pack installed?

  · Why were you running system restore?

  See: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Problems installing the Apple updates. System error program cannot start because MSVCR80.dll is missing on your computer. "

  Original title: I am a computer newbie, could someone explain/direct me?  Many thanks, Mark

  Recently, I received an Apple update normal I-tunes.  Have done a little before, never with a problem.  This time, it seemed that everything was fine, then at the end (when expects a message "successfully installed", I received an error box with this: APS Daemon.exe - error system, the program cannot start because MSVCR80.dll is missing on your computer.)  Try reinstalling the program to fix this problem. "Well, since nothing else seems to work (or helping) and my music files have been backed up, I uninstalled I-Tunes successfully, then attempted to re - install.  I had to download the installation of Apple, which was very good. Once again, everything seemed to go smoothly, installation, etc. until it got to the point when he said "Marketing Services".  Then, as before - everything stopped and jumped up to the exact same APS Daemon.exe - error box system (with the same message) referencing MSVCR80.dll once again, saying that it is missing and try to reinstall the program.  From now on, I don't know exactly what that means (I know, I know) or if it's something someone like I could fix (or even try), or if I should just run down to my local computer store?   Never had any problems with the Apple or Windows updates before this one.

  Thank you to everyone how wants take a few minutes and help a person who has started working on computers far too late in life!
  Sincerely, mark Hawk

  Hello

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  ___________________________________________________

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm 

  __________________________________________________

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• "Error system, the program cannot start because missing d3dx9_43.dll.

  Original title: error

  So I built a new computer and I was about to play my favorite game, legends, League then suddenly a message said, "an unknown DirectX error occurred and league of legends cannot start. Please make sure that your video card is to use the latest video drivers from the manufacturer. Know the name of my graphics card, ASUS GEFORCE GTX970, I went to their website and downloaded their latest driver. but who did not work, just made another pop up message that says: "system error, the program cannot start because missing d3dx9_43.dll.

  I tried several methods, but many of them do not work and I really need help to solve this problem. Now when I try both messages are in pop up. be really annoyed, I tried another game, Counter Strike Global Offensive, it's the same thing, he has done it before, but it doesn't have a pop-up, it just does not open.

  "I have tried several methods, but many of them do not work.

  This does not tell us what you tried, so I'll start at the top.

  d3d9_43.dll is one of the 'new' DX files, and you have a fresh install of Win7, you need to update DirectX

  (even if the "latest" DX files come from 2010).

  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  DX files can be damaged. In this case you can remove the suspicious file in System32 and sysWOW64 and run the Web Installer to replace this file or reinstall all files DX using the full DirectX Redist (June 2010), which will overwrite all DX files (Web Installer does not overwrite existing files).

  The second option is often necessary because you don't always get a specific file mentioned in the error.

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  .

• LR 5.7 cannot find my files already edited because I accidentally deleted them. I have original and exported raw files edited JPEG images on an external hard drive. How do return on LR the possibility to repeat already published photos complete with the p

  LR 5.7 cannot find my files already edited because I accidentally deleted them. I have original and exported raw files edited JPEG images on an external hard drive. How to get back on LR the possibility to repeat already published photos complete with a history of editing? Thank you.

  Thank you Joe Maniac.  I deleted the original linked files on my internal hard drive which were dng files, but had copies of the raw files edited and edited the exported raw files (in JPEG format).  I don't have copies of dng files.  So what I ended up having to do was import the original raw files which then made a DNG copy on my internal hard drive.  The link has not changed, but now the files were back in the original track for missing photo alerts disappeared and I was able to see my change history.  The process has been painful, but without the dng, I had nothing to do a link to more if at least re-import them files has recreated the dng.  I don't know if there was an easier way, but it seemed that the problem did not the link deletion.  I use LR for a few years, but it was a rookie mistake, precipitated by my hard drive being so jammed up I ended up delete what I shouldn't.  I should have just moved the dng and the link to an external hard drive. Thanks again.

• virtual machine cannot start, because the snapshot of the virtual machine has been deleted by mistake.

  virtual machine cannot start, because the snapshot of the virtual machine has been deleted by mistake.

  When I start this virtual machine, it prompts: unable to find the 0001.vmdk, this disc is my shot, has been deleted by mistake.

  How to restore this virtual machine.

  You need help with a revival of the 000001.vmdk deleted or do you want to repair the virtual machine so that it works without the snapshot?

  The last option, follow these steps:
  remove the virtual machine from the inventory and edit the vmx file so that it uses the basedisk. Then add the virtual machine to inventory.
  If you need data from the snapshot call me through Skype "sanbarrow" - I may be able to help

• Satellite M30: Windows cannot start because a file is missing

  Error message: Windows cannot start because a file is missing.
  \Windows\system32\config\system

  You can repair from ordinary cd and use "r" for repair.

  How to use recovery cd for this... It does not work.

  Hello

  It's not easy to use the repair mode because the recovery image file CD. The other way is that you try to start the operating system is the safe mode and look if the lack of files exist in the C:\I386 folder. If not, well I think that the only way is to recover the system with the recovery CD.

  Good bye

• Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

  Hi and help,

  searched the Web and found other discussions of the forum with similar questions.
  Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

  After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

  Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
  so select the power options... "could not start because the CpuPerf.dll is not running.
  Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

  Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
  In support of Toshiba and tried to install Power Saver... same problem will not install.

  Thus help help help if possible.
  Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

  Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

  any help please
  Tim

  Hello

  I think you can solve this problem, recover the laptop.
  But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

  It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
  Usually new installation of GST should help. But it was not and I m wondering why

  Maybe this is s question really an OS since system restore help (to the previous state) didn t

  He s strange question right now I can suggest only a new recovery

• I get an error message: "the progran cannot start because DEVOBJ.dll is missing on your computer.

  When I start my computer my screen is all black and the message says 'the progran cannot start because DEVOBJ.dll is missing on your computer. Try reinstalling the program to fix this problem' I don't see even the Start button if someone knows what's going on please help.

  Take a look at the following:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/devobjdll-is-missing-cannot-login-reinstall/5080677a-DB05-4A34-B36F-d0c3329c2dd0

  I would also like to launch a full scan with your antivirus

• test of strength of dirt the program cannot start because OpenAL32.dll is missing

  test of strength of dirt the program cannot start because OpenAL32.dll is missing

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  Check to see if the problem exists in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: after you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a.Click Startand then click run.

  b.Type msconfig and then click OK.
  The System Configuration utility dialog box appears.

  c the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  d.When you are prompted, click restart to restart the computer.

  Method 2

  If the problem exists, you can uninstall and reinstall the program.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Note: Make sure you have the installationd disk before you uninstall the program

  See also:

  How to manually remove programs from the add tool / remove programs

  http://support.Microsoft.com/kb/314481

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

• Vista cannot load RealPlayer/FireFox message "the system cannot find the environmental option". Any ideas?

  Vista cannot load RealPlayer/FireFox message "the system cannot find the environmental option". Any ideas?

  Hi Magnusopus,

  ·        You receive this message when you use Real player or Firefox?

  ·        You did changes to the computer before this problem started?

  You can try to uninstall Real player and firefox to the computer and reinstall and check if that helps you solve the problem. Access the link below and follow the steps to uninstall the program from your computer.

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Subsequently access the links below to download Firefox and Real player and even install and check if it works very well.

  Link to download Firefox:http://www.mozilla.com/en-US/firefox/ie.html

  Link to download Real Player:http://www.real.com/realplayer

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• [Trying to open the computer management] The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  I get following error when I try to open the computer management in windows 7, the error is as follows.

  The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  Where can I find this dll file and help me to download and install.

  I'd install the Microsoft Visual C++ Redistributable dll, which is necessary for the projects generated with Visual Studio 2010.

  Download the files below according to your operating system version. I would setup versions because they may be needed for different programs. Check in programs and features, you show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)
  http://www.Microsoft.com/download/en/details.aspx?ID=5555

  Package redistributable Microsoft Visual C++ 2010 (x 64)
  http://www.Microsoft.com/download/en/details.aspx?ID=14632

  Thank you

  Marilyn