Vista does not recognize video card

Similar Questions

• Vista does not recognize videos on my SD from Panasonic camera card.

  I have a Panasonic HD camera and record pictures and video on this subject. When I connect the camera to my computer Vista OS ACER 5515, it only reads the photos and not the videos, when I connect the same camera to my XP system, I have no problem with transfer of videos. The same camera software is on both computers. How can I get this problem corrected?

  Hi mark44004,

  1. were you able to transfer videos before?

  2. what happens when you try to access the videos?

  3. what happens if you copy the videos from the camera to a folder on your hard drive?

  4. What is the file format or the file of the video file extension?

  This can occur if a video file type is not supported on Vista.

  Check the link for more information:

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forumand let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• PC does not recognize video card

  I had bought an EVGA Geforce GT610 graphics card and installed in my HP Pavilion 500 - 54 (Windows OS 8.1). When I tried to install the video drivers (latest drivers from EVGA) for the new video card I received a message as the "graphics driver cannot find compatible devices. Also the new map did not appear anywhere in the graphics card or anywhere in the Device Manager. I've disabled the secure boot mode and disabled slot security legacy for the pci slot where the video card. Yet I still can't the PC to recognize the video card (which is compatible with this system). I tried to uninstall the pilots on board, but that did not help. The PC should recognize the video card, when he was put in the x 16 pci slot. Someone has or has had this problem and have you found a solution to the problem. And Yes, I have tried the card in another PC and it works fine. I have exhausted all avenues of solution up to now and still can not solve this problem. Any advice or fixes will be greatly appreciated.

  Only, I solved the problem. It turns out that the instructions on adding a video card failed a defintely detail to include.  As well as strives mode, you need to go into the boot settings and select legacy boot.  I thought that ithat legacy mode automatically would have done, but I shouldn't assume. All is well now. It detected the video card and drivers have been installed. Thanks for the suggestions. I hope this helps someone else with the same problem.

• HP 15 t J000 does not recognize video card

  Hi, I have a j-000 to 15 t.

  I don't know if this laptop comes with a dedicated video card. In ccleaner or Manager only on-board devices Intel graphics appear. But on the laptop has NVIDIA GEFORCE sticker. It may be a problem of recognition?

  I tried to install the driver but said that there is no compatible hardware.

  Hi Ghesto,

  Welcome to the HP Forums!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you have a sticker on the laptop for NVIDIA GEFORCE, but it is not recognized, your system is a CTO, so I couldn't pull up of general specifications for it.  This is a documentation on the switchable graphics that I think will help.  Overview of the switchable graphics or Dual GPU.  I think it's the right one for your system as you say Intel is recognized and the vignette tells us that you also AMD. Switchable graphics on laptops configured with Intel and ATI GPU.  If you need assistance, private message with your serial number and I should be able to pull up to your specifications.

• TS15g067cl laptop: memory card reader does not recognize the card

  The card reader does not recognize the cards.  It does not have a drive location (example: f drive).   This makes it impossible to veiw the files or photos on any (I tried six different) of my SanDisk SD cards.  I can't find anywhere to downlod corrected card rhe read updates update drivers or BIOS for my system.   I just bought this computer 1 week ago and do not understand why I read in the forums about driver issues of card reader for the last year.  Windows 8.1 has been out for some time.  Why HP would sell these computers without updating the software to make them work as they should?

  Thanks for the info.  Disk management does not show the drive.  The problem was resolved after reloading BIOS, as suggested in another post.

• ASUS Tablet does not recognize SD card

  My got transform TF 101 does not recognize micro SD cards. How can I solve this problem?

  Hi, Odiec,

  You have the software express gate on the system?  Update of the software

  http://support.ASUS.com/search/KDetail.aspx?SLanguage=en&no=80E22F30-B3FF-1DFE-9DFB-5CED63C0B176&t=2

  Put the card in the slot

  Restart the computer

  Now the system does not recognize the card?

  You formatted the card?
  https://www.sdcard.org/downloads/formatter_3/

• Windows Vista does not recognize my Ipod Touch

  Windows Vista does not recognize my Ipod at all. He even appears in Device Manager. I know that is not my USB cable because it is new, and it isn't my Ipod because it works on Mac computers. I just need someone with expertise to help me get my computer to recognize my Ipod so I can go back to enjoy my music.

  Hello

  MTP mode for WMP11 sync - mode MSC to treat the MP3 as a reader. So you have set up in the MTP.

  -----------------------------------------
  If necessary:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Make sure that Windows is updated appropriately that there have been several USB updates.

  1 check that the driver letters for them, for a player, if the drive of the default drive letter is changed, what is happening.
  Mine was h: I added a device that took H: and the player stopped. So I put it back to H: and the other
  device to J: and everything worked again. If necessary start - type in the area of research-> disk management find top
  -Right-click on it - RUN AS ADMIN

  Don't forget to remember the MP3 must be set to the PSG to sync with WMP, and meteorological service of Canada to copy and delete files
  and update the firmware.

  If no joy follow these steps:

  You may need a powered hub. (all the USB ports on your computer are not powered, often only 2)

  Try these:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Here, your devices are the MP3 player.

  Now look everywhere EXCEPT the USB controllers for your devices (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure under XP, Vista is the same, except that we need clear specific devices, as appropriate.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Vista does not recognize is not my dvd burner

  Vista does not recognize is not my dvd burner when I inseret a blasnk dvd/cd it does not appear as a pilot

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• Photoshop does not recognize my card 960graphic GeForce GTX

  Hello

  I need help on my graphics (GTX 960). Everything's fine (yesterday until I update an extension called FlatIcon (Fi)). I used it for a long time and nothing wrong. Now, Photoshop does not recognize my card. I updated the driver NVIDIA, photoshop set to run as a high performance with NVIDIA Control Panel, remove FlatIcon extension, reset prerefences (Alt + Ctrl + Shift), increase the size of the Scratch drive (200 GB free now), but without hope. I hope someone can help me solve this problem, thank you 1 million.

  Wood

  Can you have a think when this started.  Could he have when you went from CC2014 to CC2015 for example?  CC2015 makes the best use of the GPU acceleration and seems to be more picky about the material.

  You are not able to check the use of GPU acceleration at all, or simply not advanced drawing mode?

  What driver version are you using?

  FWIIW, my experience with a GTX970 was that I could only use Basic Drawing mode in CC2014, but it suddenly allowed me to set the mode advanced for awhile and then changed me back to the basic mode when I upgraded to CC2015

  353,3 get mode advanced for a short period, but it passed without known reason.

  

  Displays how do you drive?

  You have only a GTX960?

• Why vista Media Center does not recognize my card tuner Hauppauge 1850

  I just install WinTV-HVR-1850, Manager of device States work properly, yet Media Center does not recognize the tuner... Keep received message "no tuner found" not could someone explain what I need to do.

  Hello

  I suggest that you install the latest driver and software from the Web site below and check if it works:

  http://www.Hauppauge.com/site/support/support_hvr1800.html

  Try to contact the hardware manufacturer for assistance.

  Hope this helps,

• Windows Vista does not recognize my Canon powershot A710IS

  Recently tried to download photos for the first time in a few months and the USB or the SD card reader worked. The USB works for other things such as Chargers, printer, etc. Under Device Manager there is no option for a digital camera. My laptop does not recognize that anything has been plugged. Help, please!

  Recently tried to download photos for the first time in a few months and the USB or the SD card reader worked. The USB works for other things such as Chargers, printer, etc. Under Device Manager there is no option for a digital camera. My laptop does not recognize that anything has been plugged. Help, please!

  ===================================
  Maybe your AutoPlay settings need to be adjusted.

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  The following items may be worth a visit:

  (927836) a still digital camera is not recognized
  in Windows Vista or in Windows XP
  http://support.Microsoft.com/kb/927836/en-us

  Windows Vista: Using the scanner and Camera Installation Wizard
  http://grok.LSU.edu/article.aspx?articleid=10705

• Windows Vista does not recognize the removable storage device

  ISSUE INITIAL 2010-03-03)
  Here's the scenario:
  1. Insert the card compact flash.
  2 computer recognizes the removable storage (that is, it is assigned a drive letter and appears in disk management).
  3. use the icon remove the device safely in the taskbar to stop the machine to remove safely.
  4. remove the card compact flash.
  5. Insert the compact flash card.
  6. the computer does not recognize removable storage (that is, it is not assigned a drive letter and does not appear in disk management).

  The only way I can get windows to recognize the drive is to restart my computer. How can I get windows recognize the drive without having to reboot?   This problem does not occur with USB flash drives.

  Windows Vista Hame Premium, 64-bit, Service Pack 2 operating system

  UPDATE (04/03/2010):
  I have more information, I hope this helps to reach a solution.

  -J' repeated the steps above 1 to 3, with open Device Manager.  In step 3, in the Device Manager window, the icon for the question USB mass storage device becomes the exclamation point in yellow triangle icon.  Check its properties on the tab "General", in the "Device status" box, it says: "Windows cannot use this hardware device because it has been established for"safe removal", but it has not been removed from the computer. (Code 47)  IX this problem, disconnect the device from your computer and then reconnect it.  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »
  -J' then removed the card and rest of the error state.
  -J' I re inserted the card, and rest of the error state.
  -J' I then tried to update the driver by accessing the tab "driver", click on "Update driver", click on "Automatically search for an updated driver", and the result was "the best driver for your device is already installed."

  I found the solution on this hp web page:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07910&tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=3876397&lang=en#N1074

  Basically, it says NOT to use the function "remove the device safely.  Instead, just right-click on the drive in the Solution Explorer, then choose "Eject".  Works perfectly.

  Some excerpts...
  "Memory card readers are devices that use the icon remove the device safely in the notification area in the taskbar). Do not click stop in the window, remove the device safely. Doing so can disconnect the card memory reader for Windows. In this case, restart the computer to reset the memory card reader. »
  "An alternative to the restart of the computer is to use the option optimize for fast moving functionality in Windows.

• Satellite C55T: Win 7 does not recognize the card, LAN and WLan

  I have a problem.

  I ve downgraded my Toshiba Satellite A5222 C55T for Windows 7 64 bit and it does not have many pilots.
  Windows does not recognize my network connection and it didn't install my wireless driver.

  Maybe I need a chipset driver, but I found no drivers for windows 7.

  Please help me!

  If Windows 7 has not recognized the LAN and WLan card, you have not installed the proper drivers.

  A5222 C55T satellite is the portable American model.
  The drivers can be downloaded from the Toshiba help page we: [Satellite C55T-A5222 | http://support.toshiba.com/support/modelHome?freeText=1200005866]

  Choose here the drivers / updates & filter by Windows 7 64 bit (left)
  Now you should get all Win 7 64 bit drivers for Satellite C55T-A5222

• Tecra S3: Installation of Vista does not recognize the HARD drive

  I try to install Vista Ultimate on my Tecra S3, but installation does not recognize the HARD drive.

  I tried to find the driver for Vista for my computer, but not found RAID.
  Tried it with XP drivers, but no longer works.

  Do you have an idea where I can download Vista drivers for RAID?

  THX

  Hello

  Your suggestion is good. The Tecra S3 supports the RAID, and the RAID driver is required to install the OS on the HARD drive.
  On the European driver Toshiba page I found a RAID for XP driver.

  I put t know if this driver will run under Vista, but I recommend to test.
  The RAID XP 1.3.8.0 driver version can be downloaded from this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Please note; You can store the RAID driver on an external USB and Vista should recognize it!

  Good luck

• Windows does not recognize my card or my camera drive

  Windows does not recognize my sd card reader or my camera.   I have no problem with all the other devices such as printer, Mp3 player (all) external drives.

  Thank you

  Laurie.

  Hi Laurie,

  ·         Have you tried to connect the card reader on different USB ports on your computer?

  We will check if the following is useful.

  Method 1: Try to connect the flash drive to different USB ports on the computer and check if it helps.

  Method 2:

  Step 1: Try to reinstall the USB controllers and check if it helps.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager. Expand the Bus USB controllers section by clicking on the sign «+»

  c. each of the devices under the USB controller section uninstall by right-clicking on each one, then click on uninstall.

  d. close Device Manager, and then restart your computer. Windows XP re - automatically installs the USB controllers in your computer, so you don't have to do anything further. Your computer is now running properly USB devices.

  Step 2: Log on to the manufacturer's Web site and update the latest chipset drivers and other updates to the device driver.

  See also:

  How to manage devices in Windows XP