Vista does not refresh please help to update the Windows Update

Similar Questions

• Computer HP laptop window vista does not load please help

  someone asked this question and I have the same problem!

  I have a laptop HP who have dirtied pre-installed Vista and for some reason after installing automatically 3 updates the other day, he is not now charge up. The laptop is plugged in so it can configure 3 updates without failure (due to something like battery dying).

  When the laptop turns on, it gives me two options:
  • Start the reboot system (recommended)
  • Start Windows normally

  If I click on 'Launch Startup Repair', he comes back to do the same screen with them two options and when I click on "Start Windows normally", the laptop everything restarts and then return to this screen.

  Thus, F8-ing it does not help either - it gives me options like computer repair, Mode safe mode, last known good, etc... but none of these helped either.

  I looked around online for a solution, but most say on the use of the Vista installation CD, but the operating system is installed on a partition on the laptop (also there are files on what I would come down)... However I do not know if I can get it to boot on the installation partition either

  I tried F8, F11, F12 and nothing works

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See you soon.

  Mick Murphy - Microsoft partner

• Hi my audio - pc does not work please help me

  Hi my audio - pc does not work please help me

  Uninstall the driver, reboot the system. The attempt to install the same driver for Windows Vista using Windows troubleshooting. Make a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.

  Resources:

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

• my audio does not work please help

  my audio does not work please help. Thank you!

  Hi no thanks,

  1. What is the brand and model of your system and sound card?

  2. when the problem started?

  3. did you of recent changes to the computer?

  You can try to run the sound troubleshooter and see if it helps.

  No sound in Windows

  For more information, you can also consult the following article:

  Tips for solving common audio problems

  Hope this information is useful.

• my vista does not start! Help!

  Vista does not start on my computer compaq laptop. After a vista update automatic :(

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Photosmart premium C309a to flat glass copy does not work, please help.

  I get the error message 'Original Jam' and ' reload the document and then restart work ", when I try to copy from the glass flat.

  Please help if you know how to solve this problem as soon as POSSIBLE. Thank you.

  Hi, I just took one of these all in printers for my office on site, so I wanted something that does everything in one package.  For the price with discounts and rebates, I couldn't let this go.  While I was in the store, the printer he had the same problem as described, but I thought he was just manipulated man so I went and picked up one.  After setting up this morning and going through the features, I continued to get this message when I tried to scan, copy or fax:

  "Original Jam".

  "Reload the document, and then restarting the work.

  It seems that the printer does not know when to stop once the feeder is empty and has no more paper to deal with.  After playing with the printer to search for clues, I opened the top paper feeder and glanced at the mechanism that pulls the paper in.  On the cover there is a picture that shows how to get out of gear.  I managed to pop the mechanism as shown outside.  When I went to reinsert the gears, it does seem easy, but after some tests of attention, the seat of gears in which they must be.  You will notice that the left rear of the printer, denoting the set of gears, there is a latch-hook with equipment which still supported upward.  I have to be down, but mechanically, it is designed to be in the air in the non-operational position.

  After I reinstalled the paper training gear set, I double-checked all the features of the printer and it seemed to work fine.

  Suggest users try to remove and reinstall the mechanism to see if this corrects the problem.  Don't forget, the latch with a gear on the top left rear of all remains sustained upward, so it's normal.

  I hope this helps!  God knows that HP will not help you when you need it.

  I had the scr * ed on their PC HP Pavilion Slimline 3020n.  HP is fully aware of a motherboard design flaw that they neglect to difficulty.  They recognize the design defect and continue to deliver parts until exhaust you the warranty!

  -Glenn

• Windows Vista does not start upward, with success since the closure complete

  Hello world

  I actually had this problem for a long time, but I'm just now to a point where I'm ready to take a lead in fixing it.

  I can't identify when it started, but Windows Vista does not start upward, with success of a full stop. He gets to the screen where, in general, the green bars will travel across the screen, but the green bars will not come. The screen looks dim and sits there, with the text of the copyright of Microsoft Corporation. So, after not having on the mound, I have to manually shut down the computer by holding down the power button. When I try to start again, told me to go through the Startup Repair tool. If I jump the repair, I just have to meet the same problem - a computer that will not go beyond the screen "green bar".

  So, I do the Startup Repair, and told me what I do for the restoration of the system. Windows starts normally after the restoration.

  Don't forget, this happens from a full stop. To remedy this, I just never completely shut down my computer. I left running and back just at the beginning of the day. The computer may start restart, it just may not start with a full stop.

  Given the start of repair takes, literally, around 4 or 5 hours of full stops complete, accidental or power outages are a nightmare, I am obliged to wait 5 hours to get access to the computer. Fortunately, I have my laptop.

  If someone has encountered this? I saw people talking about the loop of startup repair, but that's not the point, I have. I have yet to see any discussion of my specific problem.

  Thanks in advance!

  Hello

  4-5 hours to do a startup repair is too long.

  Often you get better results if you a using a DVD of Microsoft Vista startup repair.

  Jose how to do a startup repair, etc. using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• E-mail Spry validation does not [was: Please help!]

  When visitors contact me via the contact form on my site ( http://clockdoctors.co.uk/Contact%20me.html) the 'spry validation email' field does not work. The message I get in my Inbox of this form does not appear for their email address so I have no way to recover them.

  Please can someone help!

  Here is the form - to-mail.php

  <? PHP

  $name = $_POST ['name'];

  $visitor_email = $_POST ['email'];

  $message = $_POST ['message'];

  Validate first

  If (Empty ($Name) |) Empty ($visitor_email))

  {

  echo "name and email are required".

  "exit";

  }

  If (IsInjected ($visitor_email))

  {

  echo "value of Bad email!";

  "exit";

  }

  $email_from = ' $visitor_email \r\n';// < == update e-mail address

  $email_subject = 'new submission of form. "

  $email_body = "you have received a new message from the user $name. \n ».

  "Here is the message: \n $message".

  $to = " [email protected] , [email protected] ";// < == update the email address .

  $headers = "from: $email_from \r\n";

  $headers. = "reply-To: $visitor_email \r\n";

  Send the email!

  mail($to,$email_subject,$email_body,$headers);

  fact. Redirect to the thank you page.

  header ('Location: http://clockdoctors.co.uk/Thanks20%.html');

  Function to validate against any attempt to electronic fuel injection

  function IsInjected ($str)

  {

  $injections = array ('(\n+)',

  '(\r+)',

  '(\t+)',

  "(% 0 A +) »,

  ' (0 % D +)',

  '(% 08 +) »,

  « (% 09 +) »

  );

  $inject = join ('|) (', $injections);

  $inject = ' / $injecter / I ";

  If (preg_match ($Inject, $STR))

  {

  Returns true;

  }

  on the other

  {

  Returns false;

  }

  }

  ? >

  [Subject line edited by moderator to indicate the nature of the problem]

  Yes-

  Change this

  Header ('Location: http://clockdoctors.co.uk/Thanks20%.html');

  TO

  This

  Header ('Location: http://clockdoctors.co.uk/Thanks.html');

• Driver for Matshita DVD-RAM UJ880AS Vista does not refresh

  DVD does not, the driver updates

  Matshita DVD-RAM UJ880AS

  Toshiba Satellite A500, Windows Vista

  The DVD will be able to, but it won't play.  Device Manager says

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  the button "Check for solutions" does not solve the problem

  Tried to update the drivers, but it says I have the most up to date.

  Microsoft fix - it didn't resolve the problem, or the other.

  What's next?

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Browser blackBerry Smartphones does not work, please help.

  I have had my Blackberry for about a month and a half.  For the first weeks, the browser worked fine and everything was great.  But now, the browser does not work.  My email, twitter, facebook, etc. all are still working fine, but can not access anything through the browser.  Does anyone know why this might be?  I know that I have to take it to the company store, but I live in a Spanish speaking country and don't speak much Spanish.

  Thanks for any help!

  Hi and welcome to the Forums!

  I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come):

  (1) registry HRT

  • Homescreen > Options > Advanced Options > host Routing Table > (it matter little what line is current) > sign up now

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If not, then please provide delicate symptoms of what's going on... "does not" isn't really we give good to go. Is there an error message any?

  Thank you!

• Windows 8 tiles does not online please help!

  Hi I recently bought a Samsung Ultra book, like the machine and Windows 8 is pretty cool, although in the last week the tiles (metro interface) has stopped working entirely online tiles does not update and I can't access the internet through the application of search of Google or Internet Explorer 9 App also none of the other functionality of Windows 8 are working at all online. Having said that I can access the internet via the classic desktop via Chrome interface or another browser, any other type of application works through desktop such as steam. I use a BT home to connect to the web via a wireless connection, I was wondering if this may be the problem, as in other places when connect wirelessly using the metro Win8 interface was fine and update and work in the usual way. If anyone can help or give advice as to how I can fix this problem would be great, I love works way Windows 8 and want to give him a chance this is not helping me do it at all: (thanks in advance.

  Hello

  I tried all the steps listed above. BT none of these permits.

  My subways still do not work. I get a msg of error saying that there is no internet connection, when Internet is fine. It has become a pain to try to understand what went wrong.

  Recent activity: I've updated my system and had lost in the software process Intel that were not compatible with Windows 8. I don't know nt if it has nothing to do with it.

• Photoshop CS6 "save under" does not work - Please Help!

  Hello!

  I have a question, and I can't seem to find a lot of answers for her

  So I have Photoshop CS6, and I know how to use it, I was

  used for a while. Everything worked fine on my old laptop,

  but I encountered some problems on my new laptop.

  So I worked on a painting for hours, everything was well-oiled

  Once I'd had enough and will save my. PSD as one. JPEG

  For some reason when I click on "save under" nothing appears

  The usual pop-up window did not show upward, not even an error window pops - up program

  I am really confused and extremely frustrated

  I was clicking on the "Save as", but still nothing is happening, I tried to restart, and it did not help.

  My "Save" pictures normally, but the "save under" does not work. It is not grayed.

  My picture is RGB 8 bits, the size is 900 x 1200 and image resolution is 300

  I use Photoshop CS6 on my Lenovo Yoga 3 Pro 1370

  Someone please help! I was very frustrated by that.

  Try to reset the Photoshop preferences:

  Hold down the CTRL - Shift - Alt from the cold Photoshop start.  If you get the keys to the low enough - quickly and you have to be VERY fast - it prompts you to confirm the removal of your established preferences, which will lead to them all being the default value.

• How to create Error: table or view does not exist - please help

  I'm learning to oracle for my new assignment, I come from sql server environment, so I know concept of procedures and functions but found pattern concept is different here. In any case, I'm trying to create procedure in which I'm trying to insert records into a table from another table. Here is my code:

  create or replace 
  PROCEDURE UDPINSERTEMPLOYEE AS 
  BEGIN
   INSERT INTO employee(empid,lastname,firstname) select employee_id, Last_name, First_name FROM HR.employees;
  END UDP_INSERTEMPLOYEE;
  
  

  And I got these errors:

  • Procedure TempUser.UDPINSERTEMPLOYEE@test
  • Error (4,2): PL/SQL: statement ignored
  • Error (4.99): PL/SQL: ORA-00942: table or view does not exist

  I've tried INSERT INTO employee (empid, lastname, firstname) values (1, 'Last Test', 'First Test') and it works fine.

  What wrong with my procedure?  Help, please.

  Thank you.

  Hello

  Unless this procedure is located in the HR schema, it needs SELECT on HR.employees table privileges.

  Say the procedure is located in the FUBAR scheme (in other words, connect you to Oracle as FUBAR to create).

  To grant privileges on the table HR.employees to FUBAR. Then connect like HR and say:

  GRANT SELECT ON employees to fubar;

  or, if you want everyone on your system to be able to query this table

  Employees of SELECT GRANT IT to THE PUBLIC.

  If you're not allowed to do this, ask your DBA to do.  All the tables in the HR schema provided by Oracle were put there by Oracle to demonstrate things in the documentation.  There is nothing secret or dangerous about reading anything in this scheme.  On my system PUBLIC has privileges SELECT on all tables in the HR schema.

  If the employee (plural) table is not in the same schema as the procedure (e.g., FUBAR), so you must INSERT privileges on the table, too.

  Oracle doesn't have a way to grant privileges on all the tables in a schema; You must grant privileges on each table, one at a time.

• Torch 9800 blackBerry Smartphones does not start, please help

  My father was a game in his torch, then he suddenly crash like button works / stop does not work he removed the battery and reinsert it, after that bb keeps on restart loop I tried starting it works then I ask him to remove the application that does crash after reboot I can't transcribe this safe mode and the phone always reboot loop After downloading Director of office of BB I tried to connect the blackberry it recognizes torch 9800, but there is nothing I can do about it. After searching a bit I found "common files" apploader folder might help so I took the opportunity to remove the other app, still does not work in the end, I use apploader /resettofactory to reset the device, it shows a white screen with a bar saying wiping files. After reaching 100% and restart my phone still in restart loop. What should I do now?

  Thanks before

  Hello and welcome to the community!

  You really need get in Mode safe mode again so that you can reload your operating system. You would have gotten lucky that first time with the right timing on the keystrokes... Keep train... I remember it taking a lot try until I'm a model to go properly in Mode without failure.

  Otherwise, these articles may be useful:

  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

  Good luck!

• Big flash file does not open please help

  Hi all
  
  Can someone help me please. I have a flash file that is 74 193 KB, it opens quickly on my pc but when I place the load on my site it takes forever to open. What can I do to make it open fast iss he os on one of my important links.
  
  
  Please please help
  
  

  generally, when creating for the web, you don't want more than 1 MB or more... people don't like waiting for things to load a T1 connection... it would take 6 minutes, Dial-up would take 3 hours... you certainly need that flaked into small sections and make it more dynamic.