Vista hang up on start up after installing the VIDEO CARD of 680 GTX

I have installed a 680 GTX graphics card in my system, now Vista will not start in normal mode, it crashes after loading bar, leaving only
a white screen with a mobile mouse pointer. I can boot into safe mode, try uninstalling and reinstalling the latest drivers for the card, without change.

I solved the problem by doing a restore of the system in safe mode, remove the old drivers with Driver Sweeper, then reinstall the drivers again. The card works fine now.

Tags: Windows

Similar Questions

  • long beeps after installing the video card

    Hello

    I recently bought a HP 500-223w.

    I wanted to install a power supply a video card.

    Here's the problem: everything works fine without the installed video card.

    If I install the video card then at startup it gives me a series of long beeps.

    I turned it off after the long fourth beep assuming they would UST go on and on.

    The power supply is more than enough to power the video card.

    The video card should not be bad, because I just moved it from another system. (system currently does not, bad mobo)

    I was wondering what the infinite long beep on startup?

    Thanks and regards, TJames.

    Hello:

    Product for your PC specifications indicate that it comes with Windows 8.1.

    To install a video card no HP on PC shipped with Windows 8 or 8.1, you must change both settings of the BIOS before installing the card.

    Please see this document for the BIOS to change settings...

    http://support.HP.com/us-en/document/c03653200

  • Cannot access bios after installing the video card

    I have a PC HP 800 G1 tour.  When I install an EVA GT 520 external video card I can access is no longer the first screen to get the bios unless I get out the video card.  I want to change the bios to use only the external card, or at least to see the initial splash screen, but cannot access it.  It is running windows 8.1.  I updated the bios to the lasest version and still the same.

    Hello:

    You may need to change some BIOS settings - even if you add an external video card...

    http://support.HP.com/us-en/document/c03653200

  • Help! I lost his PC after installing the video card. The software installed its HDMI audio driver. How can I get sound on PC speakers?

    To watch TV on the big screen, I installed a video card with HDMI output. (Sapphire Radeon HD6450)
    The software installed its own device driver (AMD Hi definition audio) but disabled my PC speakers (and the headphone jack).
    (The sound is displayed on the TV very well, via HDMI, in which I can not type)
    I tried to re - activate the driver Legacy in the management of the computer, but the field enable is gray.
    The PC is a hp Pavilion a1630n
    It is essential for me to get a sound on my regular speakers to work on the PC.
    How?

    Hello

    You can check this link:

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  • User does not appear in the XP start window after installing new video card and the extra memory. This option is to turn off count... safe mode does not help.

    Additional memory added, installed the new video card...
    Reboot a windows XP user name screen. any user identified.

    Can you achieve Alt + Ctrl + delete twice and connect with the classic login?

    -JW
  • Error 0X0000007E Stop after installing the new card mother and CPU.

    Original title: Stop error after installing the new card mother and CPU.

    After I installed a new motherboard and CPU I got a stop error 0X0000007E (0XC0000005, 0XB77EA756, 0XB84C742C, 0xB84C7128) and it restarted immediately. It always starts in safe mode, but I can't understand what is wrong. The old processor is a pentium 4 3 ghz, not sure what the motherboard was, new processor is AMD Athlon 64 X 2 Dual core 4200 + and I only know that the motherboard is an ASUS socket AM2. Device Manager does not recognize the CPU correctly, it shows just two entries called processor. As far as I can tell, it's almost certainly a driver issue, but I don't know how to diagnose or fix this. I am running windows XP home, I removed my video card, running 2 hard drives at 120 g (M) and 200 g (S), a DVD drive (M) and a reader of CD (S), and a stick of RAM to 1 GB.

    If you have made the change without having to reinstall XP, you will be taking and Pray H@ll. the best thing to do would be to reinstall XP and make sure you have the drivers available for your motherboard available so that you can update the installed chipset. In addition, be aware that if you have an OEM of Windows version, the license is dead when you changed the mother/CPU card.

    I hope this helps.

  • Try to install the video card. Integrated graphics card does not! (PE T110 II)

    Hello

    I tried to install a video card in the x 16 slot PCIE (ASUS Radeon 5450 Silent). I read on the Board that this video card has worked for others with the T110 II.

    I turned off the computer and unplug the power cord.

    I installed the video card in the x 16 pcie slot.

    The VGA cable is connected to the integrated VGA.

    When I turn on the computer, my monitor receives no signal. I tried to access the bios to change the settings of the embedded video controller of standard to distributed. Unfortunately, I am unable to see anything on my monitor, it gets no signal. If I try to connect the vga graphics card it shows a screen black nothing else.

    The integrated graphics card works again once I remove the location PCIe video card. The integrated graphics card does not work while the video card is connected.

    I 2.8.0 bios version.

    I can hear the computer starts, but I don't see what is on the screen, I'm not sure if the bios is starting.

    Any help would be appreciated.

    Thank you

    Use the embedded video.

  • Does not start after installing new video card

    Hello, I have a desktop H8-1284, and the video card went a few days ago. So I bought a video card Geforce GTX 650, and after installing the card and the computer starts, it hangs just at the start of the HP logo screen. So I put an old geforce 8800, and she starts without a problem. When I try the new card Geforce GTX 650, the same thing, just hangs at the splash screen.  I checked the bios and it doent seem to be something there that can help wouild. My diet is 460 w, and the new map needs of 400 w, any help will be greatly appreciated

    Hello

    Most of the cards PCI-E 3.0 are retro-compatible with the PCI-E 2.0 slots.  However, in order to get the PCI-E version 3, you must use a processor Ivy Bridge.  Look at these specificationsfor a typical NVIDIA GTX 650.

  • Drawing objects in Firefox and Thunderbird after installing the graphics card MSI R6850 of AMD

    After installing the new graphics card (MSI R6850 CYCLONE 1GD5 PE/OC), pilots the latest on Windows XP 32-bit, I frequently meet with Mozilla Firefox 8.0 and Mozilla Thunderbird 8.0 drawing artifacts. The problem presents itself as a horizontal black bands or model checker color scattered. It occurs especially when the child (like the Download Manager) passage of another application for Firefox or Thunderbird or when to switch to a window for Firefox. It affects the entire application or only some rectangular (region clearly who was redesigned due to change of application). Then repaint (such as switch between Firefox tabs) usually solves the problem. This is just visual, the behavior is not affected. The problem never happened to any other application so far. Any ideas? Any who have experienced the same problem? Thanks in advance.

    Zbynek

    P.S. Here's the screenshots for the two problems:

    http://astrofoto.euweb.cz/tmp/black_stripes.jpg
    http://astrofoto.euweb.cz/tmp/color_boxes.jpg

    Try turning off hardware acceleration.

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    If disable hardware acceleration works then check if there is an update available for your graphics display driver that corrects these problems.

  • 6000 pro SFF: installing the video card on 6000 Pro SFF with BIOS 2.03

    I am in train to install a video card in my 6000 Pro SFF and find that when the new video card is inserted, neither she, nor my tip on video card working.

    Assuming that their must be a way to get the card to operate in the BIOS (2 786 v2.03), I'm going to the "Advanced" tab and find "PCI devices. Underside of the mentioned deviced is 'Controller VGA Intel'. Choice for this controller are the IRQ = 5, 10, 11, or disabled. Apparently, the default value is 5 because that's how it is now set.

    A little scared that if I put "Disabled", which will be not only the new video card does not work, but the video card on the motherboard won't work, too.

    Y at - it anyone out there that can tell me if you change the VGA Intel controller to disabled is the right way to install the new card, and that I only put my computer in a heavy paperweight by.

    You are welcome.  Thank you for the additional information.

    I don't think you have to do anything in the BIOS.  At least, I wouldn't do anything, until you have improved the PSU to see what is happening.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • Windows Vista is not starting right after installing the game on Steam

    I had problems with my computer... I recently got a game on Steam, my computer asked me to allow a program. When I welcomed this program it restarted my computer. Now I can't open files or anything either, but Google Chrome works, steam is running. I'm puzzled about what is going on. I don't know if it's a virus or something much worse. Since I welcomed this program I have not been able to start my computer correctly, I have done analyses and a recovery disk to start problems.

    Problem event name: Startup repairV2

    Signature of the problem 01: AutoFailure

    Prob Sig 02: 6.0.6001.18000.6.0.6001.18000

    Prob Sig 03:6


    Prob GIS 04:786444

    Prob Sig 05: Corruptvolume

    Prob Sig 06: NoRootCause

    Prob GIS 07:0

    Prob GIS 08:2

    Prob Sig 09: WrpRepair

    Prob GIS 10:87

    OS version: 6.0.6001.2.1.0.256.1
    Local ID: D

    If any of you have any solution please reply or send me an email. Thank you very much.
    -Brian Evnas

    Hello

    try a restore of the system before this happened

    http://www.windowsvistauserguide.com/system_restore.htm

    If necessary do in safe mode

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  • HP elite m9340f: do not start after replacing the video card. Repeating short and long beeps. Help!

    Hello: I have a m9340f HP Pavilion Elite aged five years, under vista. He had a problem with video output, so I bought a new video card and exchanged out them. but now, the computer does not start and made that one short beep and long stretch trying to power upward.  I double checked all connections and they are all good.

    Please help me if you know what the problem is.  Thank you... KarlJ

    I found that 1 beep short, followed by a long beep indicates a memory failure, try reinstalling your memory

  • memory problems after installing the network card passthrough.

    First of all, Thanks for the help.
    I installed a network card passthrough directly to a Windows machine on ESXi 5.1 and start the machine when I get the error:

    Group VM.6791: invalid parameters for VM memory allocation vmm0: XXX. () min: 3670016, max:-1, minLimit:-1 actions:-1 units: pages)
    Group VM.6791: cannot Admit VM: memory admission check failed. Asked booking: 3716761 pages
    SharedArea: Unable to find 'testSharedAreaPtr' in SHARED_PER_VM_VMX domain.

    I looked at articles and don't see that only the value parameters Backup of the RAM, but If I change these settings, I get the following error:

    Not valid parameter memory: memory reservation (sched.mem.min) must be equal to memsize () 14336) .

    Thanks for the help.

    What is the memory you have allocated for this machine?

    Can you increase the amount of memory reserved for this virtual machine to its configured memory size and try to turn it?

  • The program monitor is black, no video after installing the new card chart

    I bought a graphics card PNY Nvidia Quadro 2000 a few days ago, and since that it is been installed, I was unable to watch videos in my program, the source or the same reference monitor.

    Similarly, if I designate one of my monitors soley for video playback, the screen is all black, and as the timecode to advance my calendar I only hear.

    My project is using "The Mercury Playback Engine GPU acceleration" for first Pro CS6.0.1

    I went to use a graphics card with two graphics cards and installed a third-party monitor. I spent these days around trying everything I could think of, I even uninstalled and reinstalled the first.

    Hardware specifications:

    Windows 7 ultimate (64 bit)

    HP Pavilion h8-1230z

    AMD-FX8150 Ghz 8 core processesor 3.59

    16 GB OF RAM

    PS 600W

    EVGA Nvidia GeForce GTX 550Ti

    PNY Nvidia Quadro 2000

    I use a PCI x 16 for the Quadro 2000

    I use a PCI x 1 adapter w / x 1 - x 16 slot for the 550Ti

    Could be the problem?

    More information

    Vectorscope, all scopes, YC - waveform Display modes all work.

    I downloaded the latest Nvidia drivers for both of my cards.

    I did not receive messages error or had problems in After Effects CS6, as video playback works fine in my other adobe applications.

    Since you have very recently purchased the Quadro, try to return it and replace it with a nVidia GTX 670. Approximately equal to the price, but the GTX 670 is much faster and it supports up to 4 monitors, so you can remove the Ti 550 and sell.

    I guess your problem is configuring dual video card that use different drivers. Double video cards is possible, even if PR can use the main map, but drivers must be the same for both cards and this is not the case.

  • install the video card

    How can I disable integrated/onboard graphics on my hp 3500 pro using windows 7.  my system does not show a boot option disable security

    Most HP desktop PC BIOS turn off the graphics card integrated automatically when a video card is installed.

    UEFI PCs are a very different breed. Upgrade one video solution to others which specifies the option HP is quite difficult because of the strict limitations that the BIOS placed on upgrades.

    Yours is a work PC and not a class of consumer product.

    The NVIDIA GeForce GT635 2 GB and AMD Radeon HD8570 are only two video cards eventually sold with the PC model you own. Low profile cards models are likely to be the best way to go.

Maybe you are looking for

  • How can I fix no. Service / research, for my mobile data?

    I got iOS 10 on my phone, about two days ago, my cellular data said either the search or no service, I downgraded to 9.3.2 via iTunes, but still, he says still no service, I tried every procedure and measure I could take to find my service and I call

  • I cannot varify my email on sync 0ptions

    In the options, he said "Foxfire email.com account is not verified. I click on the tab check and go to my yahoo, it is said, congratulations, you have almost finished. Click on the blue tab and it redirects me to a page indicating that your browser i

  • Re: What position the caddy a Satellite Pro 6100 use?

    I recently acquired one of the old machines out there I have an I was wondering where can I get the internal carriages of?Second, this model uses a hard drive spindle adapter? Thanks in advance!

  • iPhone 4S vibrates

    Apple has replaced my no 4S vibrating with a brand new 4.  Just went through the process of restoration and the new phone doesn't vibrate either!

  • update to Microsoft Windows Mobile 6.1 on the pocket pc

    I have a HP Ipaq HX2490b with Microsoft Windows Mobile 5.0 build (2003?) 14366.1.0.1. why the new 6.1 is not compatible with versions earlier than 14847 version? It's been almost what I obsolete, and it is only a few years old. Is there a way to get