vista home premimium installation error

Similar Questions

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.

• Vista Home Premium, Installation of SP2 problem

  Dell Inspiron laptop computer with Vista Home premium.

  When I try to install sp2 it fails when a box pop up appears entitled "spinstall.exe - Unable to locate component" with the following message: -.

  "This application has failed to start because sqmapi.dll not found. Reinstalling the application may fix this problem. »

  This happens as well with the update and sp2 download. Any help / suggestions would be appreciated.

  Hello dazedandconfuzed, welcome.

  I recommend you try a SFC scan first. If this fails, we can try to manually find the DLL file referenced in the error message and see if there are any problems with the file itself.

  Try this:

  1. click on START
  2. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.
  3. type sfc/scannow , and then press on enter
  4. then restart your computer

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need a windows vista Home Basic installation disc, I have a product of windows vista code, I had

  I have a hp conpaq turn and I don't have a Home Basic windows vista installation disc. the hp crashed and never booted up but recently I got windows 8 and I ins

  Hello

  With a HP Compaq laptop press you F11 on startup to start the recovery process.

  But, like the HP advises, if you install another Vista operating system, the recovery Partition is therefore more able to be used.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Error code 80070005.

  I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Have you downloaded "accesschk,' help the thing 'command prompt', but still not of chance?

  original title: error code 80070005

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• Windows 7 Home upgrade Vista Home Premium installation

  After you run the compatibility test, I bought a new Windows 7 Home Premium, disabled all viruses or other programs of security and attempted to start the installation.  The initial 'investigation' indicates the presence of "PerfectDisk" which he said I had to uninstall before upgrade installation can begin.  However, I don't have this program on my computer, or anything related to defrag some defrag program that accompanies the computer HP G60 - I can't identify or remove if I wanted to.  I don't know yet how to disable (only can adjust daily/weekly/monthly sync settings, etc.) and do not know what is the name of the program.  All other programs seem to agree for installation to occur.  Is there a way around this problem, as the software will not attempt to load/upgrade as long as this "Perfect Disk" program is visible during the early investigation.

  Ideas or suggestions?

  Look under C:\Program Files and C:\Program Files (x 86) If you are running a 64-bit version of Windows Vista for all records related to the Raxco PerfectDisk, then delete.

  https://support.Microsoft.com/en-us/KB/976552

  Andre Da Costa.

  Thanks for your very useful suggestions and stick with me on this issue.  I think it has now been resolved.  I saw another post about problems after installing Windows 7 as an upgrade to Vista and read setting up installation PerfectDisk maybe stay in Program files, after that the program is uninstalled.  So, I went to Program files and seen everyone without finding any PerfectDisk anywhere.  However, several years ago, I used PCMover and when I clicked on this program, three files Raxco were still present.  I have now deleted them and will continue the installation of Windows 7 now - that is why, one of these files must have included remnants of PerfectDisk or an earlier version of a defragmentation program.

  So, let's see how the upgrade installation is progressing, but at least it is moved in front of the roadblock. »

  Thanks for your help - invaluable for someone without experience.

  JW

• Vista home basic sp1 - error 0x8024200D

  trying to upgrade my Vista Basic to vista sp1 I get this error... 8024200d can any body help me on this please.   driving me crazy

  Also have a look here

  http://support.microsoft.com/kb/947366

• Windows Vista home Premium update error

  I continually get an error Code 80080005 when you try to update windows. How can I go about fixing of this please?

  Hi lepaknitram,

  Thank you for using Microsoft Vista answers Forum.

  Try the steps mentioned below:

  * Copy / paste commands in a Notepad and save the file as "Resolution.bat" on your desktop below.
  Run the file to run the commands.

  ipconfig/flushdns
  CD %windir%\System32
  del /s *.chk; *.RIP; *.tmp; ~ *. *
  msiexec/regserver
  Start msiserver sc config = auto
  net stop msiserver
  msiexec /unreg
  msiexec/regserver
  regsvr32 /s msi.dll
  regsvr32 msihnd.dll/s
  net start msiserver
  regsvr32 c:\windows\system32\wuaueng.dll/s
  net stop wuauserv
  CD /d % windir %
  rmdir /s /q c:\Windows\SoftwareDistribution
  net start wuauserv
  departure of eventlog sc config = auto obj = Localsystem
  net start eventlog
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  regsvr32 c:\windows\system32\wuaueng.dll/s
  SC tisb wuauserv
  D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  start wuauserv sc config = auto obj = Localsystem
  net stop wuauserv
  SC config bits start = DEMAND obj = Localsystem
  net stop bits
  regsvr32 msxml.dll/s
  regsvr32 msxml2.dll Kbps
  regsvr32 msxml3.dll/s
  regsvr32 msxml4.dll /s
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  regsvr32 c:\windows\system32\muweb.dll/s
  regsvr32 /s winhttp.dll
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 wuaueng1.dll/s
  regsvr32 c:\windows\system32\dllcache\wucltui.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 wups2.dll/s
  regsvr32 wuweb.dll/s
  net start wuauserv
  net start bits
  sc = auto config cryptsvc start
  net stop cryptsvc
  rmdir /s /q %windir%\system32\catroot2
  regsvr32 cryptdlg.dll/s
  regsvr32 cryptui.dll/s
  regsvr32 dssenh.dll/s
  regsvr32 gpkcsp.dll/s
  regsvr32 initpki.dll/s
  regsvr32 mssip32.dll/s
  regsvr32 sccbase.dll/s
  regsvr32 softpub.dll/s
  regsvr32 slbcsp.dll/s
  regsvr32 rsaenh.dll/s
  regsvr32 /s winhttp.dll
  regsvr32 wintrust.dll/s
  net start cryptsvc
  cd\
  sc config = ose start request
  net start dare
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  regsvr32 es.dll/s
  output

  * After the execution of commands, try to perform a Windows Update, if you are still having the same problem, then:

  First, please check that there is no any third-party firewall preventing Windows Update to communicate with "update.microsoft.com.

  * Check if Windows Firewall is blocking the update of Windows.

  * I suggest you to disable Norton and Windows Defender as well, because sometimes there are opportunities to Windows Defender blocks the Windows updates.

  Please see the following article for connection errors:
  http://support.Microsoft.com/kb/836941

  836941. you may encounter temporary connection errors when you use Windows Update or Microsoft Update to install updates

  Let us know if it helps.

  Thank you and best regards,
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista Home Premium activation error (invalid key)

  Can someone help me with the error in question? I put the key provided in the book, and always I have an error to activate.
  Kind regards

  Renato.

  I agree with snipe; the key at the bottom of the device is only for the OEM version that has been delivered with the laptop recovery CD! You can't use it with any other Windows CD!

• Windows Vista Home premium get error 80070103, code downloads, but do not install, this get almost every day since 4/09 thank you HHnyc

  my history of download/install bed failed.  brief explanation under code 80070103 error reads something like there is a new version of NVIDIA GeForce 7300LE already in place... don't know.

  Run AVG 2013 safety.  used Windows security pak 2

  any ideas?

  Hello

  If you receive the error Windows Update 80070103 while installing updates, you might be trying to install a driver is already installed on your computer or a driver that has a lower compatibility rating that you have already installed.

  I suggest you perform the steps in troubleshooting of these links and check if this solves the problem.

  Windows Update error 80070103

  Error 0 x 80070103 is displayed when you use Microsoft Update or Windows Update Web sites to install updates

  I hope this helps you solve the problem. If the problem persists or if you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

• VISTA HOME PREMIUM 643 ERROR MESSAGE AND COMPUTER SLOW AFTER INSTALLING VISTA

  I WANT TO GET MY PC RUN FASTER AND AFTER INSTALLING VISTA, IT SEEMS MORE SLOW TO EVERYTHING I TRY TO RUN I HAVE AN EMACHINES T5052 AND IT SAYS THAT I ONLY HAVE 1 GB MEMORY (RAM) BEFORE I WAS USING WINDOWS XP PLEASE I NEED HELP, THUS FREEING UP SPACE AND DO IT RUN BETTER

  OD WINDOW ADVANCED CARE?

  You must have only ONE AV installed; otherwise, you get crashes, freezing, program conflicts, etc.

  Defender is an Anti-Spyware, not an AV.

  The FREE Malwarebytes will work OK with them.

  And do the work that I advised to do. Mick Murphy - Microsoft partner

• Windows Vista KB2887069 update installs, error code: 80070233

  I think I downloaded successfully several more recent updates that made the update of obsolete KB2887069.  Because I have successfully downloaded KB2887069 still could not install it because it becomes obsolete compared to my other updates downloaded, I now continue to receive notifications, asking me to restart my computer for KB2887069 to take effect. When I shut down and restart, I keep getting a notice of default download of KB2887069 has been installed in vain. How can I get rid of the update KB2887069 after that I downloaded it already. Because it is not installed, I cannot uninstall it but because I downloaded it, I'm constantly bothered by the notice asking me to restart so KB2887069 will install.  Thank you!

  Hi Dean,

  You can read the following article to hide the update mentioned:

  The problems with the removal of updates
   
  Hope this information helps. Back to us for assistance.

• Vista Home Basic Edition does install in a dell inspiron 1440.

  I bought a laptop that did not come with an operating system because I happened to have a Vista Home Basic installation disc that came with my previous laptop. so I tried to install the operating system, but after that the display shows "windows is loading files...". "this message appears:

  Windows has encountered an error... file cannot be found or corrupted.

  file: windows/system32/boot/winload.exe

  error code: 0-xC0000001

  What does that mean? I tried twice to reinsert the disc and redo everything but shows same message. is there something wrong with the installation disc? Should what I do to fix this? Thank youi so much.

  Recovery of the computer disks are often related to the hardware of the computer that they came with.

  Also, you have rules of licensing:

  If Vista is preinstalled on your other laptop, it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  See you soon.

  Mick Murphy - Microsoft partner

• 0x800F081F vista home prem sp1 installation error

  Vista Home Premium

  Windows Update invites you to install SP1, but repeatedly fails

  Tried to download the full version & installation

  come with error 80070003 0 x

  Disabled Windows Update service, folder c:\Windows\SoftwareDistribution renamed, restarted Windows update server

  Rebooted & tried SP1 update complete again

  0x800F081F error

  This has been a problem because the hard drive been replaced & reconfigured by HP

  0x800F081F CBS_E_SOURCE_MISSING the source for the package or file not found

  80070003 ERROR_FILE_NOT_FOUND the system cannot find the path specified

  Suggest you first download and Save the System Update tool (or CheckSUR). Do not forget that the version you download is the architecture of the system, for example. If it is Vista x 86 (32 bit), click on the download link next to "All supported versions x 86 Windows Vista". If it is Vista x 64 (64-bit), click on the download link next to "All supported versions x 64 of Windows Vista". Once the download is completed , go and configure the system to boot. NOTE: If the system is always connected to the internet and a 3rd party firewall was used in normal mode of Windows, then make sure that the native Vista firewall is now enabled by open Windows Firewall in Control Panel.

  Once the system has been started in a clean condition, run the system update readiness tool. If you are prompted to, restart the system, when it has finished the race. While still in the State of boot, install the downloaded full standalone package manually SP1 now.

  If SP1 is still unable to install successfully, please go here unlimited free support to get SP1 installed: https://support.microsoft.com/oas/default.aspx?ln=en-us&x=8&y=6&prid=11274&gprid=500921&st=1&wfxredirect=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for the Service Pack 1 (SP1). This support for SP1 is valid until August 30, 2010. Availability of support chat or messaging differs depending on your location. For customers resident in America North or Canada, chat and e-mail support is available.

  Some questions may require more Advanced support for which there is a charge.

  MowGreen Services update - consumer safety

• Installation installation of Win Vista Home premium error Windows errors can not reset the deployment engine. to install windows, restart the installation.

  Original title: Error Installing Win Vista Home premium.

  I have a PC with Windows Vista Home Premium.  Suddenly, it wouldn't start.  I changed the boot CD ROM and put my Vista disc in and tried to do a "repair" that it came with missing engine or something like this.  After several attempts, I gave up and formatted hard drive losing all my data and programs (rather difficult to backup files when the computer does not start).  So, I tried a complete installation.  I put in the license code and he started the installation.  After a few minutes, the message came;  "Windows Setup could not reset the deployment engine.  to install windows, restart the installation.  I tried several times including completely turn off the computer for several minutes and try again.  I tried several times.  I thought oh well, I will install my Windows 7 program (this and never used).  Error on this installation was: your CPU is only good for 32 bit and Win 7 I have is a 64-bit version.  I'D RATHER INSTALL VISTA BUT need help on the error regarding the deployment engine.  Thank you, Lloyd

  Hello

  See if this solution works for you:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-Setup-could-not-reinitialize-the/f9e6f3e6-EA80-487F-8d86-36c793f7c152

  See you soon.