Vista Home Premium 32 bit freezes after an indeterminate amount of inactivity

For the last few weeks, my HP Pavilion dv6500 laptop has been freezing after periods of inactivity. Seems that the only change made to the computer until that moment was a Windows update that was late about 3 - 4 weeks. No other programs have been installed.

I have not precisely timed duration yet, but I think 10-15 minutes of inactivity in freezing results. Little happens is important if the lid is open or closed. Only "a freeze" is to do a hard restart.

I ran in Mode safe... same results. I did a system restore to a point before the update of Windows. I reinstalled the latest graphics and audio drivers. I ran SpyBot: Search and Destroy... we found an approximately 18 items requiring repair or removal, but it also has not fixed the problem. I ran Check Disk and the problem still persists.

I'm running out of ideas, and this problem is driving me absolutely crazy. I hope someone can help before I lose my mind. Thanks in advance.

Hello

1 I want to erase the General corruption and repair/replace damaged/missing system files:

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------

Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
similar are not enabled.

Shoot sleep problems - hibernation
http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

How to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686

Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)

All the default power plans and then set them as you wish.

==========================================

Spybot is a fine program, however, it has two modes of residents who can cause problems with IE 8, Vista/Win7
and other programs. In the settings of Spybot, I stopped TeaTimer - SpyBot - settings. And then start - type
in the search box-> find Services at the top of list - just right-click on it - RUN AS ADMIN - look for SBSD security
Change-double click on it - STOP Service Center, then MANUAL. Now you can run SpyBot as one
scan on demand whenever you want. You will need to restart to stop TeaTimer to load again if it has been
the before value.

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • Windows service install is missing from my Windows Vista Home Premium, 32-bit system, after uninstalling other software (IOLO System Mechanic)

    Windows service install is missing from my Windows Vista Home Premium, 32-bit system, after uninstalling other software (IOLO System Mechanic). After a month of looking for the installation Service, I finally found that a group of 10 files and among them was this executable file
    x86_microsoft-windows-p... installerandprintui_31bf3856ad364e35_6.0.6002.18005_none_d83fb8abf30e1638_printui.exe_bb673fff
    If these are the files I'm looking for, what should I do to get them back to where they should do? Any help would be appreciated...

    System Mechanic is your troublemaker & you have lots of company! [1]

    See my colleague Maurice RESPONSE message in this thread: http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

    If still no joy, contact System Mechanic (iolo.com) supported for assistance-, they are well aware of the problem posed their candidacy.

    TIP: If you think that more never your registry database needs to be cleaned, repaired, boosted, to the point, healed, twisted, fixed, magnified, "swept" or optimized (and even more to convince that it is not), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  • sfc/scannow foud the corrupted files after upgrade from Vista Home Premium 32 bit

    Hello

    It is an event that I went through:

    (1) recently I received a bunch of updates to Vista Home Premium 32 bit, after I did the update I decided to perform sfc/scannow task and this is the error message I got the "Windows Resource Protection found corrupt files and managed to fix them." Details are provided in the CBS.log windir\logs\CBS.log newspaper. For example c:\windows\logs\CBS\CBS.log

    Repair of system files change will take effect after the next reboot.

    (2) so I did restart and then try to run the sfc/scannow task once again, but I still got the same message I described in step 1 again. So basically sfc/scannow function did not repair the corrupted files.

    (3) the next step, I decided to perform a repair Installation of visa which took me 10 hours to complete the task, once the task of upgrading of repair has been made and before the windows update, I ran sfc/scannow task and this time he finds any corrupted files, but after I updated windows sfc/scannow result was the same as step 1.

    It is obvious to me that one of the updates of the origin of this problem, but find it me hard to pinpoint that one. So I am writing this e-mail to help and I hope that the problem will soon be solved. Please let me know if you need me to submit the CBS.log file for you to review thanks in advance.

    Kind regards

    Jdec9

    Hello

    Sorry to hear that you are facing a problem due to the update of Windows. I'll certainly do my best and get the issue resolved.

    I suggest you to view update history to see which update might be causing the problem.

    (a) open Windows Update by clicking Start , all programs, and then Windows Update.

    (b) in the left pane, click view update history.

    (c) to display more information about an update, double-click it.

    Once you know Update KB number, provide us with the same for later analysis. You can also try the steps in the article and see if it helps.

    You can also download the files of cbs to Skydrive.

    Use SkyDrive download collected files and post screen shot/image

    Hope this helps and let us know if you need more assistance. We will be happy to help you.

  • If I have windows vista Home Premium 32 bit genuien instalation in my laptop after how I can to update or upgrade in Windows Vista Home Premium 64-bit

    If I have windows vista Home Premium 32 bit genuien instalation in my laptop after how I can to update or upgrade in Windows Vista Home Premium 64-bit

    If I install windows vista Home premium genuine in my laptop after how I can to update or update 64-bit of Windows Vista Home premium 32 bit

    If I install windows vista Home premium genuine in my laptop after how I can to update or update 64-bit of Windows Vista Home premium 32 bit

    Hello

    You are unable to update or upgrade Vista 32 bit to 64 bit of Vista.

    32-bit to 64-bit, or 64 bit to 32 bit is done by a new installation using a full version of the operating system.

    32-bit and 64-bit are different operating systems.

    See you soon.

  • After you have reinstalled Vista Home Premium 32-Bit with Service Pack 2. Windows recognizes only 958 MB 2G of Ram. The processor is AMD Turion 64 X 2 1.80 GHz 32 bit

    Hello
    I have a hp Pavilion notebook PC with a new motherboard.  After you have installed Windows Vista Home Premium 32 bit, I noticed that Windows only recognizes 958 MB 2 GB of RAM installed.  No one knows why this is happening and how can I fix or troubleshout the problem?
    Thank you, PD777

    Hello

    How is your memory configured? that is, what is 2 x 1 GB modules or module 1 x 2 GB. If the former I would check the physical installation of the modules on the MB memory.

    Vista 32 bit should see up to 3 GB, I doubt that it is Vista the cause.

    Another thought, are your shared graphics? in some BIOS, it is possible to ask the system to use a fixed amount of RAM the GUI system, this memory will not be included in the complete system.

    See you soon

  • After the upgrade to Vista Home Premium (32 bit) for Windows 7 Ultimate (64 bit), I can see my second hard drive in the Device Manager, but I am not able to access it in the Explorer... How can I fix it?

    How can I access my hardrive second in windows Explorer after I have updated to Vista Home Premium (32 bit) for Windows 7 Ultimate (64 bit)?

    Go to disk management and assign a drive letter to the drive.

  • Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

    Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

    According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

    "You must update the following plugin:

    • Adobe PDF plugin for Firefox and Netscape 8.2.6
    1. Check your plugin versions on one of the following links:

    2. Update of Adobe Reader (PDF plugin):
      • Within your existing Adobe (If you have already installed) drive:

        • Open the Adobe Reader program in your list of programs
        • Click Help > check for updates
        • Follow the instructions to update
        • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
      • Download the full installer (If you have NOT installed Adobe Reader):
      • After installation, launch Firefox and recheck your version.
  • System recovery fails on the new HARD drive (HP - DVD, Vista Home Premium 64 - bit, DV4-1225dx)

    I have a Pavilion DV4-1225dx who had a hard drive failure. VISTA Home Premium 64-bit.

    Went to buy the oem HDD @ Tiger Direct (0A 56415 Hitachi Travelstar 5 K 320 Mobile Hard drive - 2.5 ", 5400 RPM, SATA 3 G, 250GB, 8MB Cache) but it was out of stock. I bought the proposed replacement (WD Blue 320 Mobile Hard Drive - designed for the calculation of daily - 2.5 "SATA 3 Gb/s, 5400 RPM, 8 MB c...)

    The HP system recovery DVDs work for more than 12 hours and fails. CTOERROR.flg

    ChkErrBB.CMD: Detect an error in the PININST_BBV

    ChkErrBB.CMD: Check C:\system.sav\logs\BurnBootWarn.log

    In addition to a video driver not install, I found:

    C:windows\system32\Drivers\enecir.sys not found

    Recovering the system formats the HARD disk properly. After that the failure of the HARD drive recovery shows that:

    C: 38.8 GB free of 58.0 GB

    E: 2.02 GB free of 12.9 GB

    15 f009wm 8.1 WIN 64 bit
    Office Jet 2540
    P2-1113w WIN 7 64 bit
    G71-340US WIN 7 64 bit
    dv4-1225dx VIsta 64-bit
    zd7000 WIN XP Pro
    xv886 Millennium WIN / WIN XP Pro
    HP deskjet 6980xi
    HP pavilion xt236 / ze4200 WIN XP Media Edition

    found an another Hitachi 0A 56415 and was able to install with recovery disks. Have used the new and more great as a backup USB drive with in a disk caddy.

  • Error code 8024200d when installing SP2 for Vista Home Premium (32 bit)

    I use Vista Home Premium (32 bit).  When Windows Update recently
    tried to install SP2 (several times), the quoted error message
    repeatedly prevented installation.  Google showed a number of similar
    references to the problems associated with SP1 (from one year or if there are and less).  Is
    There is a work around for this message because it applies to SP2?

    Biggar Gordon
    Houston, Texas

    Hi Colonel biggs,

    Welcome to the Forums Microsoft Vista

    This problem may occur if one of the following conditions is true:

    · A program on your computer interfered with the installation of the service pack.

    · There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

    To resolve this problem, try each resolution in the 'General resolution"and the"Advanced Troubleshooting"section in the order in which they are presented. After trying a resolution, try to install the service pack again. If you can't always install the service pack, try the next resolution.

    Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack

    Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.

    If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process

    Solution 2: Run the system update readiness tool

    System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the section "how to download the system update readiness tool. If you are unsure which version your computer has installed, follow these steps:

    1. click on Start

    2. collapse this includes it in the Search box, type System, and then click System in the programs list.

    The operating system is displayed as follows:

    · For a 32 - bit version operating system, 32-bit operating system appears for the system type under System.

    · For a 64 - bit version operating system, 64-bit operating system appears for the system type under System.

    After you determine which version of Windows Vista, your computer is running, download system update readiness tool.

    Resolution 3: Close or disable any applications that may be running, restart the computer and then install the service pack

    1. Close all applications and restart your computer.
    2. Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:
      1. Right-click the icon of the third-party program.
      2. Click Close, disable, outputor an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.
    1. As soon as you close the antivirus or the antispyware software, try to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site:

    http://www.Microsoft.com/downloads (http://www.microsoft.com/downloads)

    1. After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.

    For more information follow the link below:

    http://support.Microsoft.com/kb/947366

    Hope this information is useful.

    Suresh G
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to install Windows Vista Home Premium 64-bit?

    Hello! Can someone tell me how can I make Windows Vista Home Premium 32-bit to 64-bit?

    Here's my question: -.

    1. I bought a version of Windows Vista Edition retail family Premium, the package has only the 32-bit support (DVD). I found a few website say that the product key for the retail version of Windows is for 32-bit and 64-bit, as long as we use 32 - bit or 64 - bit on a single computer at a time. If I'm wrong, anyone could answer my question?

    2. now, I plan to move from 32 bit to 64 bit, my problem is that the version sold at retail of Windows that I purchased only contain 32-bit media:-

    (a) is there a way I could install the 64-bit Windows?

    (b) is it possible I could get 64-bit support?

    (c) could I use media in Windows Vista Home Premium 64-bit retail a friend to install on my computer? And after installation, I can activate Windows with my product key?

    Looking forward to the responses, thank you.

    Do you a clean install from 32 bit to 64 bit.

    http://www.Microsoft.com/windowsvista/1033/ordermedia/default.mspx

    Link above is how you get 64 bit DVD, if you have a retail license.

    You can use any Microsoft Vista 64-bit DVD and use your 32 bit key as you say it's Vista Retail

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon...

    Mick Murphy - Microsoft partner

  • 8007371c with windows update error code. Vista Home Premium 32-bit system.

    I have Vista Home Premium 32 bit system and I have problems with windows update since early April.

    The system attempts to update 2807986 KB, 2809289, 2808735, 2820917, 2813345, 890830 (eventually successful), 2817183, 2813170 and 2823324. These will not update after many trials and the system will display an error message saying that some changes could not be completed, returning from changes, will try again on start up, do not turn off.

    On reboot, it gives the message that the updates are not configured correctly, returning changes, do not turn off. I get the 8007371c error code in the popup window windows update but can't find specific information on this code. Help please!

    Thank you.

    Fact: Applications, (Norton and McAfee) are known for do not uninstall or upgrade properly.

    Ideally, should have uninstalled the Norton application AND THEN run (b) the removal of Norton & rebooted tool FRONT (c) you have installed AVG Free and you would have BEFORE your Norton subscription had expired!

    Roll up your sleeves & cross your fingers.

    ACTIONS

    [You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all the steps in a 1 uninterrupted session! [If a step said to restart, restart!]

    1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. right click on the file that you saved in #1 above and select run as administrator to run the utility. Do not TOUCH the computer until the race is over, and then restart.

    4. right-click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

    Note: Good for IE9 & IE7, too.

    4B. right click on the file downloaded in # 4 above has (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.

    4 c. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 4 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

    5 reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

    6. right-click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [3]

    6. double-click on the file that you saved in # 6 above & accept invites him to MERGE with the registry data.

    7 restart again.

    8. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

    Note => for best results, check the option Remove personal settings .

    9. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

    9 b. IMPORTANT!-online make disappear/close the pop-up window that offers the Windows Update troubleshooting tool! -then...

    9. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [4]

    10 restart once again and then run a manual check of updates & see if you manage to install all updates offered security (e.g., KB2829530, KB2847204, KB2830290 & KB2829361); Follow all the instructions.

    11. in response to this post with a status report.

    Good luck!

    =========================================================
    [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

    [2] after that we ended up this thread, feel free to one of your other browsers reaffirm as a default if you wish.

    [3] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

    [4] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  • I have windows vista Home premium 64-bit installed on my sony vaio cs36gj, which was not install updates. Or running fixit is. How updated?

    I have windows vista Home premium 64-bit installed on my sony vaio cs36gj, which was not install updates. \niehter is running thing fixit. How updated?

    Hi Vishal,

    1. what happens when you try to install Windows Update and the fix, you get any error message or error code?

    2 have you made changes on the computer before this problem?

    3 is the limited issue during the installation of specific updates?

    Problem when installing windows update, see the following Microsoft article.

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2509997

    Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services: http://support.microsoft.com/kb/906602


    Notes:

    The following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    Back up the registry: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

    CHKDSK: Data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

    Microsoft safety scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

    Keep us informed on the status of the issue.

  • Replaced motherboard on HP PC Windows Vista Home Premium (32 bit)

    On a HP Pavilion Media Center m8226x desktop PC is running OEM Windows Vista Home Premium (32 bit) version.  Replacing motherboard ASUS M2N68 - motherboard HP Narra2-GL8E 6150SE with a card mother MCP61PM-HM (Nettle2) due to the failure.  The two boards have same chipset and form factor.  Can I just replace the Board of Directors without having to reinstall windows?  Do I need to install new drivers?  I do not have a CD installation or installation key, Microsoft would provide a key if necessary?  Is there a link I can reference for replacement MB / install?

    Thanks for you help!

    HC

    You pay with the exchange for motherboards.

    1. you normally have to reinstall the OS after changing motherboards (different drivers)

    2 Microsoft won't provide a new product key.

    3. you can try explainging what you do.

    4. 'How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • Blue Screen at shutdown - STOP: 0x0000 008F (Vista Home Premium 32-bit)

    Whenever I stop, I get a blue screen of death.  I had not used my computer for a few months, so I do not remember if the hardware or software has been added.

    I put the BSOD to stop so I could write the codes - I googled them came but with nothing.

    Here is what says the BSOD:
    STOP: 0x0000 008F (0 x 0005 C000, 0 x C4E3, 0 x AC2E DC0C, 0 x 0000 0000 8261)

    My system runs Vista Home Premium (32 bit) on a bridge 5442 with 4 GB of Ram and an Intel Core 2 CPU 4400 running 2.00 Ghz

    Any help or advice is most appreciated.

    Thank you kindly!
    Marilyn P

    Hello

    Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
    View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
    in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
    a pilot just HIDE. Antivirus is another possibility.

    See methods of update driver generic in the next message.

    BCCode: 8th 0x0000008E is the same as 0x1000008E

    Cause

    Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS

    =============================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    It comes to my convenience store generic bluescreen:

    Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
    Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
    codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
    information on all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

    You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
    system installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
    smile, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps and happy holidays!

    Rob - bicycle - Mark Twain said it is good.

  • wireless connection of losses on the reactivation of vista home Premium 64-bit

    My windows Vista Home Premium 64-Bit loss wireless connection on the awakening. I then have to make a stop down and re boot the lap top. Any suggestions/corrections?

    Hi Funnyman4u,

    Check to see if the problem exists in a clean boot state,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a troubleshooting follow step 7: reset the computer to start as usual

    See also:

    Network connection problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

Maybe you are looking for