Vista Home Premium Bluetooth driver for Sony Ericsson C510 phone

Similar Questions

• After the upgrade to Vista Home Premium (32 bit) for Windows 7 Ultimate (64 bit), I can see my second hard drive in the Device Manager, but I am not able to access it in the Explorer... How can I fix it?

  How can I access my hardrive second in windows Explorer after I have updated to Vista Home Premium (32 bit) for Windows 7 Ultimate (64 bit)?

  Go to disk management and assign a drive letter to the drive.

• Is there a possibility of upgrade version OEM of Windows Vista Home Premium 32 - bit for Windows 7 for free?

  I learned from a few sources online that I can get a 'upgrade' for the version OEM of Windows Vista Home Premium 32 - bit for Windows 7 free. Is this true? Should I participate in forums feedback for Windows, etc. in order to acquire such a valuable product?

  If not, is there another 'economic' way to get a copy of windows 7?

  Really appreciate your time in answering my question.

  Despite what you may have "competent" wrong, there is no "free" upgrade to Windows 7.  You can buy Windows 7 from the Microsoft Store. Carey Frisch

• How can I get a valid Windows Vista Home Premium product key for my Acer Aspire 5050?

  My hard drive failed in my Acer Aspire 5050.  Replaced, reinstalled Windows Vista Home Premium with the appropriate product key, but Microsoft says that it is invalid.  Microsoft wants to buy me a new copy of Windows & there is no available from Acer for my laptop recovery disk.  What can I do?

  The product key on the bottom of the laptop is an OEM product key.  This product key does not work for the commercial versions of the operating system.  The original shipping charge might work on the system without entering a product key.

  If you did not, or are no longer able to get the recovery media, you will have to buy an operating system of your choice for the installation.

  Please see this link:
  http://community.Acer.com/T5/community-KB/installing-a-different-operating-system/Ta-p/48739

• I got my Vista home premium 32 bit for 5 years, s and never stuck to the configuration of stage 3 of 3. Help PLZ its updates since 08/01/13 in this way?

  Hello, I hope someone can help me if I can use my lovely Vista Home premium 32 but the computer again. its driving me crazy why I'm stuck in stage 3 of 3 to 0% for 18-13 configuration updates. THA last 5 years I've never had a problem finishing to get updates. Now that I've seen other ppl having it stuck in this loop and cannot go out for a long time and microsoft did not have a fix for that update.  But I have a gateway GM5420 desktop and I'm not that good at any issuss of fixing software happens to me from time to time. but it's the one worts. I read KB949358 and I can't do most of the fixes here. And I tried all F8 functions and they will all go back to the configuration of stage 3 of 3. and I have trired a few things on F2, F10 and start the computer it always goes back to configuration of stage 3 of 3 0%... Can someone please give me some instructions step by step on how to fix this so I can use my nice vista office because I have a lot of things on the hard drive, I don't want to just throw in a way. There must be an easy fix now?  I hope I get any help because I am a 100% disabled Vet. and just can't come out and put down 600 at 1000.00 for another beauty of desktop computers. I have Toulouse each all evry one of your help so that I can go beyond this configuration step 3 of 3 to 0 5 from 08/01/13... Thanks for any help? !!

  I had this problem for 3 days
  No matter what I do it will not go beyond the screen "Configuring updates: stage 3 3-0% complete.» Do not turn off your computer.
  I even tried boot to Disc... Please help. I need to get to school papers that he

• Requested help recovering from the change that I did for the 'Public' of Vista Home Premium file permissions for everyone

  I made a blunder when changing the permissions of public folders for everyone.  I am now connected to Vista Home Premium on my home PC as an Admin will be complete permissiongs.  When I right click on the folder Public, pooling and property options are both now gone.  How to restore the availability of these options?  Also, I can access to is no longer the files that I previously copied into the Public folder.  How can I restore my access to these files?

  Have you started with elevated privileges command prompt? Just running in the administrator account is not enough. Looks like you don't have because it starts in your user directory. If you were high would begin in the Windows\System32 directory.

  See: http://windows.microsoft.com/en-US/windows-vista/Command-Prompt-frequently-asked-questions

  Orders, you should get something like this:

  Takeown /f /a C:\Users\Public
  ICACLS C:\Users\Public/Grant "BUILTIN\Users: (F)".
  ICACLS C:\Users\Public/Grant "Administrators: (F)".
  Takeown /f C:\Users\Public\*/a
  ICACLS C:\Users\Public\*.*/Grant "BUILTIN\Users: (F)".
  ICACLS C:\Users\Public\*.*/Grant "Administrators: (F)".

  I can't guarantee that this will fix your system. You must give permissions for the system and other users accounts.  If you have access to another system, I would compare the settings there. These programs will help you determine the permissions associated with a system

  • AccessChk http://technet.microsoft.com/en-us/sysinternals/bb664922
  • AccessEnum http://technet.microsoft.com/en-us/sysinternals/bb897332

• How can I get a picture ISO of Windows 7 Home Premium 64 - bit for Sony VAIO VPCEB18FD?

  can someone help when my HARD drive crashed

  Download the Windows 7 ISO Image

  Windows 7 Edition Home Premium x 64 (64-bit)

  English: http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso

  ImgBurn - supporting the creation of CD more. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

  Download and install burn ISO Gear (free):
  http://www.GearSoftware.com/gear-ISO-burn.php

  Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

  You need to get the appropriate drivers for your computer from the Sony Web site model after reinstalling:

  esupport.sony.com/US/perl/select-system.pl?model_type_group_id=10

• Impossible to go from Vista Home Premium 32-bit for Windows 7 Ultimate 32 bit

  I ran all the checks until I bought my upgrade from Amazon and should have been able to upgrade. I even added RAM memory while I have 3 GB of RAM. I put in the disc of Windows 7 Ultimate and it starts but just goes to "save temporary files" and stays there. It is not go further. I got on the phone twice with Microsoft technology and I did everything that they told me nothing does not. They tell me that I have to do a "clean" installation Why Microsoft cannot fix this problem? Now I have to return the disks to upgrade and install pay $100.00 more for the own. What a pain. Any ideas before returning the updated version?

  Tip, you can clean installs the with the upgrade disk.

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

• The upgrade in Windows Vista Home Premium to Windows 7 Ultimate

  Hello

  I HAV downloaded the ISO file following from the MSDN (en_windows_7_ultimate_with_sp1_x86_dvd_u_677460.iso) site for the upgrade from Windows Vista Home Premium 32 bit for Windows 7 Ultimate 32 bit.

  How should I now improve my OS from Windows Vista Home Premium 32 bit for Windows 7 Ultimate 32 bit.  Double-click the ISO file says that Windows cannot open the file.  How can I open the file?  Should it be converted into a .exe file.  If so, how?

  Thank you.

  A .iso file is an image of a dvd.  It is not a program or data file.  You need to burn this image on a dvd with your burning program.  Copy disc, burn to disc.  We'll then work the disc in your optical drive.

• Vista Home Premium doesn't recognize the Iomega Floppy Plus 7 in a reader

  Are there drivers updated to Vista Home Premium OS install for install / will recognize the IOMEGA "Floppy Plus 7 in a Card Reader USB?  I can only find Windows XP SP2... don't worry!  PLUG-AND-PLAY does not load the appliance.  Help!

  Franell,
  Thank you for visiting the Microsoft Answers community forum.

  Have you tried to install the driver for your device in XP compatibility mode?  You should be able to right click on the file and select Properties, then click on the Compatibility tab.  Here are more detailed instructions:

  http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

  Unfortunately, your device is not listed as compatible with Vista, so it may not work.  You can find Vista compatible hardware and software by visiting the center of compatibility of Vista here:
  http://www.Microsoft.com/Windows/compatibility/

  You can also use your favorite search engine and search the Internet for "Vista compatible floppy drive.

  Let us know if we can provide assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows vista home premium-file not found

  I have windows vista Home premium on my computer sony vaio notebook. now its does not start with a message 'windows\system32\yhsngvr.sys' is not found. How can I fix it

  Hello

  Can't find any info on this file, so it could be malware related and you dodged a bullet.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Vista Home Premium with X 200 order

  Hello world. I have a small question regarding my recent X 200 buy. I ordered my X 200 with Windows Vista Home Premium and 1 GB of RAM. I want to move to 4 GB (2x2gb) RAM me when the unit arrives. I would like to know if the Windows Vista Home Premium that comes with my X 200 will be editing 32 or 64-bit. On the order page, there wasn't an option to choose edition 32 or 64 bit for Vista Home Premium (it was for Vista Business and Ultimate however). If the 32-bit edition of Vista Home Premium is the default option, can I call Lenovo for a 64-bit edition? Thanks in advance for your help.

  You don't have to take into account the fact that many programs that run in the 32-bit environment does not automatically work in the 64-bit environment. The reason why Microsoft continues to sell the 32-bit operating system rather than any move to 64-bit is the fact that a lot of programs and drivers do not work in the 64-bit environment.

  If you are adamant that the 1 GB of ram is giving a performance increase then you can try to borrow them a disc 64 bit someone and install it and then use your own OS serial key to activate it.

  I have 8 GB of ram in my T61 with 64 bit Vista and for most cases the increase in performance is almost imperceptible from the 3 GB ram under Vista Home Premium 32-bit for many programs.

• can I use a disk of vista Home premium with a vista business key?

  I just got a laptop that has been deleted.  the key below is for windows vista Enterprise edition.  Can I install a version of vista Home premium and use this key?

  Hi Angela,

  Thanks for posting the question in the Microsoft Community forums.

  Unfortunately, you can not use the Vista Business Edition key to activate the version of Vista Home Premium.

  For more details, you can contact the store Windows.

  See the Windows store Contact link.

  How and when to contact Microsoft customer support Service.

  http://support.Microsoft.com/kb/295539

  For any help about Windows, you can always post on the Microsoft Community Forums, we will be happy to help you.

  Thank you.

• Vista Home Premium 64-bit system file dllhost.exe is missing.

  System file dllhost.exe is missing.  sfc/scannow could not repair/replace it.  How can I get a new copy of the file dllhost.exe for Vista Home Premium 64-bit (for an AMD64 machine)? Thank you.

  This is an extract from the log after running sfc:

  00000861 [SR] cannot repair the military record [l:22 {11}] "dllhost.exe" Microsoft-Windows-COM-mother surrogate, Version 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2010-11-16 10:40:53, info CSI 00000862 [SR] this element is referenced by [ml:38 {19}, l:36 {18}] "Windows Foundation.
  2010-11-16 10:40:53, info CSI 00000863 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:22{11}]"Dllhost.exe '; source file in the store is also corrupted

  System file dllhost.exe is missing.  sfc/scannow could not repair/replace it.  How can I get a new copy of the file dllhost.exe for Vista Home Premium 64-bit (for an AMD64 machine)? Thank you.

  Extract the exe of your Windows DVD:

  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Upgrade Windows Vista Home Premium (not the valid product key problem) to Windows 7 Home premium

  My friend gave a laptop computer whose OS is Windows Vista Home Basic Edition.  I format the computer and install a Windows Vista Home Premium I have for my desktop computer.  Now, I have a problem with a product key.  When I start the laptop, it indicates a product key requirement.  I enter my desktop OS product key, but I still see the declaration valid product key.  My question is this.  If I buy the upgrade to Windows 7, the operating system will work in the laptop even if she has a problem with the product key.  If I buy Windows 7 upgrade, there will be no problem with the product key?  Or do I have to buy a new Windows Vista Home Premium for the laptop?  Or if you know anywhere I can buy a product key for Windows Vista with a reasonable price?  Thank you

  You cannot transfer a license from another computer to another computer, especially if the license came with this machine. You will need to purchase a new license.

  Yes, you can purchase a license of Windows 7 Edition upgrade Home Premium and use it.

  Where can I still get Windows 7?

  Full version - Microsoft Windows 7 Home Premium

  Version upgrade - Microsoft Windows 7 Home Premium Upgrade

  Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)