Vista install fails on the second stage. "Install.wim is missing or damaged.

Similar Questions

• I can't boot after installing the latest win xp updated system - missing or damaged/system32 hal.dll

  I have win xp and that you have installed the latest updates 7 system - now I can't start.

  I get the message:

  Windows didn't start because what follows is missing or corrupted /system32/hal.dll

  I don't have a CD system - which can do? everything I read said to alter, copy, etc., but since I cannot start, I can't do it all.

  Help me please, thanks

  XP trying to tell you that it cannot find the file.  It is extremely likely that the hal.dll file is really missing or damaged (XP just cannot find it).

  You should not have the Windows XP installation CD for this problem.

  It is very unlikely that the manufacturer will be able to you provide a XP installation CD, but contact them if you wish.

  What would you do if YOU were the manufacturer?  Communicate with yourself?

  The instructions in this link to replace the hal.dll file are bad, bad, bad.  If you follow them, you will need to replace the hal.dll file, but it will not be the correct hal.dll file.  There are 7 possible hal.dlls on the Windows XP CD, and check out the generic hal.dll file won't be one you need unless you run a virtual machine.  Clearly, the technical support engineers have never actually solved this problem.

  Notice that the thread is not marked as 'response' by the original poster, but by a moderator of the Forum after a period of 5 to 10 days of inactivity where some MSE posted a link to a few articles in the KB (this is how things work here).

  You should start by making a bootable CD of XP (no XP media required) Recovery Console and run chkdsk /r first just to be sure of the file system NTFS is not damaged.  Then see if you can start after that (maybe it won't).

  THEN, you must use the Recovery Console to rebuild your boot.ini file.  I would like to rename the file c:\boot.ini first then you don't rebuild on top of the afflicted (this part is missing from the article).

  I can't understand why Microsoft support engineers seem unable to display instructions to make a CD of bootable XP Recovery Console.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton and Spybot.
  AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Here's how to make a CD of bootable XP Recovery Console:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  If you still have the same problem (likely), then the value rebuild your file c:\boot.ini as article says here:
  http://support.Microsoft.com/kb/330184

• migrate from Windows 10 failure error oxc ox400d 1900 failed in the second phase of startup with the error during operation of data on my windows desktop 7

  Windows 10 has failed 75% error oxc 1900-ox 400 d has failed in the second phase of startup with the error during the operation of the Migrate_data on my windows desktop 7 using media creation tool. Help please.

  Turn off the computer.

  Wait 10 minutes.

  Start the computer.

  The installation program automatically restores your previous version of Windows 10 or an earlier version of Windows.

  Launch the prompt with administrator privileges.

  Press the Windows key + X

  Click prompt (Admin)

  Type the following command:

  Rundll32.exe pnpclean.dll, RunDLL_PnpClean /DRIVERS /MAXCLEAN

  Press enter on your keyboard

  Exit command prompt

  Restart

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Enable AAA fails on the second ACS server

  I have 2 servers Windows 2003 4.2 ACS, who authenticate with AD. I have configured authentication GANYMEDE + both for my PIX 515 running version 7.24. GANYMEDE + authentication works fine on both. However, when I use the 'aaa authentication enable console LOCAL ProsperAdminAuth', the enable password only works with the first ACS server. When the first server is unavailable, it fails on the second ACS server and authentication failed on ACS "ACS invalid password" reports. It does not allow the LOCAL password. I checked all the password and there is no problem there. I know that for you, because GANYMEDE auth works. Someone at - he seen elsewhere issue or know what I might try?

  Thank you

  Vivek

  Hello

  Configuration of external database is not replicated between servers ACS so my guess here that is on your ACS secondary if you go to the external-> unknown user policy user databases, you will find that under configure enable password behavior you are on "internal data" instead of "The database which the user profile is required."

  -Jesse

• Satellite Pro P200 - 1KE Vista loses contact with the second internal HARD drive

  Vista Business SP2. I have a Satellite Pro P200-1KE, with two 160 GB drives: a Hitachi configured as C: (operating system, programs, etc.) and E: (data, other programs). The second is a Toshiba MK1637GSX. This little about it and nothing of any importance and is normally configured as d. Unfortunately this hard drive has now become invisible to Vista, although it is still recognized by BIOS and Device Manager. In managing computer does not appear in the list in the upper pane, it comes without a letter from reader below. I have tried everything I know to get recognized, including the following:
  (In no particular order):

  * Remove computer - managed, reset as a single Volume: it always fails
  * Reformat to NTFS using Linux GParted or utility disk Linux (via a USB stick with Linux ice Peppermint on that nerd), sometimes combined with the restoration of the system - it works, but only for a single session. She always disappears again when you restart
  * Remove the driver from Device Manager and pointing plug-and-play with Windows System 32 and Windows Update - which seems to return the driver - but does not recognized disk, unfortunately
  * Meanwhile, throughout all this, Vista insists on finding a driver for "unknown device" that she sometimes found and (allegedly) installs and sometimes find one fails to install.

  Bah!

  Anyone know anything else I can try - preferably without having to reinstall the entire operating system, or run the risk of using Toshiba Hardware Setup that does not seem to come with all the instructions and enigmatic, who wonder if I want to delete stuff 'selected', without showing me what kind of things I am alleged to have selected for removal!

  Best
  David

  If this second HDD is not so important to try to start the original installation disk Microsoft (Vista or Win7) to see if the second HDD will be recognized for the installation procedure.
  You can also try to install Win7 on this second HDD to see if the installation is correctly finalized. Later, you can check if you can start the second HARD drive preinstalled OS.

  Test just to see if this problem is related to Vista only.

• Cumulative update to IE9 for Windows Vista (KB292418) fails with the error code 800719E4

  Automatic update of Windows is on and downloaded the updated Cumulative of IE9 for Windows Vista (KB292418). Its installation was also successful until stage 2.

  Upon restarting, the system did not proceed to step 3 and reported that he could not apply. The windows update tries to repeatedly apply this patch has failed, but never succeeds. When the computer reboots, the white screen will appear. I ran the autoatic troubleshooting provided by Microsoft who reported some problems with the registry and settings.  Even after the system is restarted, the problem still persists.  I would like to find a solution to this problem.

  My system is running Windows Vista Home Basic with Service Pack 2 32-bit.

  Moved from Vista to install, upgrade and activate Forum.

  Hello

  Try to download the update and save it to your desktop

  Close all windows/Applications

  Right-click on the file and select run as administrator

  If that fails, run the system update tool

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

• SP 2 update fails in the third stage during reboot after update

  Downloaded SP2 without problem.
  Update is done without a problem.
  PC re - starts automatically.
  Poster "Phase 1/3, then Phase 2/3 SP2 installation Phase 3/3.»
  100% of Phase 3 and sits there for a long time.
  Later displays "Installation failed, removing all SP @ updates"
  Sits with the above display for a long time.
  Re-boots at the login screen.

  That is what it is.

  HP Pavilion S3100n, Vista Home Premium 32-bit with all updates prior to SP2.

  Hi Keithg,

  Thank you for visiting the Microsoft Answers forum.
  As one of the troubleshooting steps I recommend trying to install the SP1 update as a standalone, follow these steps.

  Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack

  Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.

  If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process.

  How to obtain the stand-alone package for the service pack

  To obtain the service pack, see the following articles in the Microsoft Knowledge Base, depending on your operating system, and then look for the option to install the service pack from the Microsoft Download Center.

  935791 (http://support.microsoft.com/kb/935791/) how to obtain the latest Windows Vista service pack

  Solution 2: Run the system update readiness tool

  System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the section "how to download the system update readiness tool. If you are unsure which version your computer has installed, follow these steps:

  1. Click Start
  2. In the Search box, type system, and then click System in the programs list.

  The operating system is displayed as follows:

  • For a 32 - bit version operating system, 32-bit operating system appears for the system type under System .
  • For a 64 - bit version operating system, 64-bit operating system appears for the system type under System .

  After you determine which version of Windows Vista, your computer is running, download system update readiness tool.

  How to download the system update tool

  You can download the preparation tool system update from the following Microsoft Download Center Web site:

  http://www.Microsoft.com/downloads (http://www.microsoft.com/downloads)

  The following files are available for download from the Microsoft Download Center:

  Windows Vista

  Download the Windows Vista package now. (http://www.microsoft.com/downloads/details.aspx?FamilyID=2889489c-ee87-4607-8aa5-812e8078ab27 & amp; DisplayLang = en)

  Windows Vista for x 64 systems

  Download Windows Vista for the systems based on x 64 package now. (http://www.microsoft.com/downloads/details.aspx?FamilyID=14f76773-007c-493f-bece-243bc21ac73d & amp; DisplayLang = en)

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Best regards, Joseph.N sunny. Microsoft answers Support engineer visit our Microsoft answers feedback Forum and let us know what you think.

• Creating a container of the package fails on the last stage by renaming the .exe in .dat

  I tried several times to create a package without success. All files seem to have downloaded when I look in C:\Users\MichaelK\AppData\Local\Adobe. There is data here 14.5Gig.

  I get the following.

  25/11/2015 15:20:04 [INFO] AdobePackageBuilder - Build Version - 1.9.2.53

  25/11/2015 15:20:04 [INFO] AdobePackageBuilder - verbosity Logging Level Set of 4

  25/11/2015 15:20:10 [INFO] AdobePackageBuilder - Sucessfully extracted products at D:\Temp\{5B1E86DF-7A0C-4934-89B3-5EBADC1096D9}\ACCCx3_4_0_180

  25/11/2015 15:20:10 [INFO] AdobePackageBuilder - Extraction completed with return code = 0

  25/11/2015 15:20:16 [WARN] AdobePackageBuilder - no file exist at the (D:\Downloads\Adobe CC\CC Install\Build\ASU\Tools\CCC\Uninstall\deploy\remove.xml)

  25/11/2015 15:20:18 [INFO] AdobePackageBuilder - copied the file/folder Installer (packages)

  25/11/2015 15:20:19 [INFO] AdobePackageBuilder - Setup copy file/folder (resources)

  25/11/2015 15:20:19 [INFO] AdobePackageBuilder - copied the file (Set - up.exe)

  25/11/2015 15:20:19 [INFO] AdobePackageBuilder - copied file (payloads\Media_db.db)

  25/11/2015 15:20:19 [INFO] AdobePackageBuilder - copied file (payloads\Media_db.sig)

  25/11/2015 15:20:19 [INFO] AdobePackageBuilder - copied file (payloads\Setup.xml)

  25/11/2015 15:20:22 [INFO] AdobePackageBuilder - copied the file/folder Installer (packages)

  25/11/2015 15:20:23 [INFO] AdobePackageBuilder - Setup copy file/folder (resources)

  25/11/2015 15:20:23 [INFO] AdobePackageBuilder - copied the file (Set - up.exe)

  25/11/2015 15:20:23 [INFO] AdobePackageBuilder - copied file (payloads\Media_db.db)

  25/11/2015 15:20:23 [INFO] AdobePackageBuilder - copied file (payloads\Media_db.sig)

  25/11/2015 15:20:23 [INFO] AdobePackageBuilder - copied file (payloads\Setup.xml)

  25/11/2015 15:20:23 [ERROR] AdobePackageBuilder - cannot rename the path (D:\Downloads\Adobe CC\CC Install\Build\Setup\AME9.0en_GB\Set-up.exe) to the path (D:\Downloads\Adobe CC\CC Install\Build\Setup\AME9.0en_GB\Set-up.dat)

  How can I successfully create a container to the package.

  Have you tried to clear the cache of CCP and try again? Damaged in the cache files can cause errors when building your package.

  Go to the 'Welcome' on the menu drop-down menu > Preferences, then choose "click here to purge the cache folder.

• OLIVIER 11.1.1.7.1 - load Plan "From field only and charge (SDE and SIL)" fails at the first stage

  Hello

  I'm BIAPPS 11.1.1.7.1 configuration and her charge leading "extract domain only and charge (SDE and SIL)" (started in Confugration Manager) fails with the following error.

  ODI-1519: series step 'Load start Plan (InternalID:683500)' failed because step 'Refresh Global Variable (InternalID:684500)' child is in error. ODI-1529: updating of the variable 'BIAPPS.13P_CALENDAR_ID' failed: to select WHEN "Refresh of the Global Variable" in (select distinct group_code from C_PARAMETER_VALUE_FORMATTER_V where PARAM_CODE = '13P_CALENDAR_ID') THEN (select param_value in the C_PARAMETER_VALUE_FORMATTER_V where PARAM_CODE = '13P_CALENDAR_ID' and group_code = 'Global Variable Refresh' and datasource_num_id = ' #BIAPPS.) WH_DATASOURCE_NUM_ID') ELSE (select param_value in the C_GL_PARAM_VALUE_FORMATTER_V where PARAM_CODE = '13P_CALENDAR_ID' and datasource_num_id = ' #BIAPPS.) WH_DATASOURCE_NUM_ID') END of the double ODI-1533: Error refreshing variable 'BIAPPS.13P_CALENDAR_ID': could not get a link to the logical schema "CM_BIAPPS11G" using the OVERALL context.

  Investigation when I looked for info of logical connection diagram CM_BIAPPS11G (Physical schema BIAPPS_BIACOMP) in the topology Manager, JDBC connection string is empty and name of user and password is set up. My questions are so

  (1) is this a normal behavior that CM_BIAPPS11G receive the JDBC connection string & name of user and password of dynamically at run time?

  (2) If yes then how this string is passed and where it get stored?

  (3) I'm tempted to the name of user and password string / JDBC hardcode in the ODI topology manager and kickoff of work load here. Do you see any risk in doing this?

  Any pointer/suggestion will be highly appreciated.

  Thanks and greetings

  JDBC and name of username/password used to store in rather logical physical then diagram... its ok to hardcode those details under physical schema...

  Just logic diagram retrieve this information at the time of execution to load data in temporary tables...

  Please let me know if I'm wrong...

  See you soon!

  SH! going

• Installation of Windows 7 error code: 0xc0000221-Windows failed to load because a critical driver is missing or damaged.

  Original title: Installation of Windows 7 error Code: 0xc0000221

  I am trying to install Windows 7 home premium 32 bit on a blank hard drive.  When I try to install it, I get the error:

  File: \windows\system32\drivers\adpahci.sys

  Status: 0xc0000221

  Windows cannot load a critical driver is missing or damaged.

  This is a new real installation disc.

  Any ideas on how to solve this problem?

  Hello

  Please contact Microsoft Community.

  What is the brand and model of the computer?

  I suggest you use the Bootrec.exe tool in the recovery Windows (WINRE) environment to troubleshoot and repair the Boot Configuration data.

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  Hope this information helps.

• Office jet 8500 a after a paper jam, the message of the said printer ink cartridge is missing or damaged

  I had a paper jam, after I got the book out by opening the gate to the front, he said the black ink cartridge is missing or damaged.  I shook my head to feel a little and the message went away.  But now he says that the yellow ink cartridge is missing or damaged.  I didn't do anything the message disappears and it will not be printed.  The yellow cartridge was replaced just a few weeks ago and is still full

  Hello sharonc41,
  Welcome to the HP Forums.
  
  It seems that after getting a paper jam error set, you now encounter a cartridge missing error on your Officejet 8500 a. I will do my best to help you with this question.
  
  "The following document may be useful to resolve the"missing cartridge"error: an error ' ink cartridge appears to be missing or corrupt" Message appears on the printer control panel.
  
  Please read and follow all the steps in the document. I would like to know if he was able to help. If you have any other questions or need further assistance do not hesitate to ask.
  
  Thanks for posting on the HP Forums.

• two vista installed, first of all, a damaged and not formatted, how to remove it

  My first vista got corrupted everthing I tried to fix it but he was never able to load. so finally reinstalled vista again and he could not formatted the damaged so it installed next to him and now I have no more free space. How can I remove the damaged, vista bootsect I tried but nothing.

  Follow these staep and install an own custom. removal of the original Vista installation process:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• security of dec 24 2009 updated for Windows vista (kb958690) failed. and the security update for windows vista December 24 2009 (kb960225) failed, (kb9772), December 24 2009 doesn't have all three update failed. I want to know a solution to these problems

  I tried three times to updaed with no sloution. I also need updated my browsers to internet explorer 8 with space for 32 bytes. need soultion to this problem too.

  loveforsasha,
  We need more detailed information.
  What version of level pack Windows\service are you?
  What is the error code that you found these updates?
  Other updates have been installed?

  Here is some information, you can begin.
  Solve Windows Update installation issues
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Converter 5.0 fails at the first stage the conversion

  Hello, I am trying to convert physical ENT W2K8 64bits in virtual server, but I got an error occurred during the coversion: 'unknown Exceptions. I use VMware vCenter Converter Standalone server 5.0.0 installed on the same server as VMware vCenter Server 5.0.0. I have two hosts in cluster, one is ESXi 5.0.0 another ESX 4.1.0 but I think that the problem exists not in hosts. Maybe someone has an idea how to solve my problem?

  Hello

  Ask you to check 4 points

  (1) cross weather check NetBIOS over TCP/IP is enabled in your physical server.

  (2) Windows Installer, Windows module installer and WMI Performance fit and the virtual disk services are running.

  (3) service of Windows Firewall is stop

  (4) any of the below mention of the ports are open in the firewall.

  Source	Destination	TCP ports	UDP ports	Notes
  Server Converter	Source computer	445, 139, 9089 or 9090	137, 138	If the source computer uses NetBIOS, port 445 is not necessary. If NetBIOS is not used, ports 137, 138, and 139 are not required. When in doubt, make sure that none of the ports are blocked. 9089 port is used for the Converter Standalone versions and 9090 is used for the converter plugin. Note: unless you have installed the Converter to the source computer server, the account used for the authentication of the source computer must have a password, the source computer must be network enabled file sharing, and it can't use Simple file sharing.
  Server Converter	VirtualCenter	443		Required only if the target of conversion is VirtualCenter.
  Client converter	Server Converter	443		Only necessary if a custom installation has been completed and the portions of server and client of the converter are on different computers.
  Source computer	ESX	443, 902		If the target of conversion is VirtualCenter, single port 902 is required.

• Preloader does not not on the second stage

  Hello. I'm new to flash and I have this problem on the preloader.

  I have a preloader and it works on the first frame of the stage 1. Now, after loading, a menu will be appear and there is a Start button. There is no error in my code after clicking the Start button, it will stop to frame 1 scene 2 were second preloader is, so it seems to load quickly, so there is no loading unlike the first preloader animation. What I want to do is after you click the button Start , the preloader will reappear to load the scene 2 Help, please

  Here is the link to the file:

  https://www.dropbox.com/s/8raiwk4qxe693u1/test.fla

  Thank you!

  You don't need any 'real' preloader for a scene that is in the movie that you have already loaded. If you want to have a model for graphical effect or smth.

  simulate a preloader with animation or a timer controlled MovieClip.