Vista loads but crashes at login screen

Similar Questions

• The Windows Vista startup disk crashes after the screen "loading files".

  I am trying to install Windows Vista on a new computer. The computer recognizes the boot disk and I can go beyond the "Loading files" screen, but when I get to the screen that looks like the standard login screen, the menu to install Windows never appears. The display will be just what it was. Any help would be appreciated.

  Hello Trey

  I suggest you see if there is an update of the bios for the motherboard. You can also check out the link below and see the suggestion given by Tim Quan.
  http://social.technet.Microsoft.com/forums/en-CA/itprovistadeployment/thread/6cb6510d-3e4f-4611-ba73-7e68fc4aa0a6

• Blue screen in Vista 7 just after the login screen

  We get a blue error screen 7th on Vista 64-bit SP1 right after the login screen appears.  The blue screen immediately goes, and system restarts (or sometimes just hangs).  I was not able to find the codes of the 7th in the research:

  (took a picture of the screen...)

  STOP: 0x0000007E (oxFFFFFFFFC0000005, 0xFFFFF80002325C87, 0xFFFFFA60165BE3E8, 0xFFFFFA60165BDDC0)

  I am able to boot in safe mode.  Do you have a chkdsk C: /F and which did not help.  Do you have a repair system using the Vista startup disk and that did not help.   Went to safe mode and MSCONFIG and position the clean boot and that did not help.  I tried to update to SP2 and unable to complete safe mode.

  The ideas and the sage advice would be greatly appreciated.

  Pete

  Hello

  Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available from the OneDrive or other
  file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  ------------------------------------------------------------------

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  

  Bug SYSTEM_THREAD_EXCEPTION_NOT_HANDLED control has a value of 0x0000007E. This bug check indicates that a system thread threw an exception that the error handler did not.

  Important info if you received a STOP Code
  
  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED parameters

  The following settings appear on the blue screen.

  To view the settings, click on this link.
  http://msdn.Microsoft.com/en-us/library/ff559239 (v = VS. 85) .aspx

  CAUSE

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.

  • 0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• On 10 Windows, Firefox installs and loads, but crashes at about 15 seconds later, even if I do nothing. This can be corrected?

  This was happening on Windows 8.1, just until I upgraded. There are so many updates happening that I don't know what could have triggered this. I think I had just updated Flash and I see some comments on this. I tried the beta version of Firefox with the same results. It of just crazy that it installs and actually loads, but only for a few seconds and then it freezes and comes from the box with the message to send to Mozilla. So far, no help from them. A few times he asked me to synchronize my Firefox and this process has started, but then it crashed before it finished.

  Sorry, you're not on a Mac. This is a correct version of the above for Windows:

  Thanks for incident reports. Unfortunately, I think you need to temporarily disable or remove the iCloud bookmarks extension until the source of the problem or conflict is determined.

  Start Firefox in Safe Mode by holding down the SHIFT key when you start Firefox. A small dialog box should appear. Click on 'Start mode safe' (not update).

  Then, you can delete favorite iCloud of page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then you can find it on the right side.

  After leaving Firefox and run it again (not holding SHIFT), runs from Firefox?

• Vista back to five minutes login screen

  Here's the problem, I have windows vista and it keep coming back to the login screen after five minutes of no activity. This happens even when I read if I don't move the mouse every two minutes. I turned off the screen saver (never use, off for more than a year after the installation of the system) and even set the power settings for always. Yet this undesirable behavior continues.

  Hello

  When you go to CUSTOMIZATION to set your screen saver, you will find an option "on Resume, the logon screen. Turn that off or uncheck to fix the problem.

  See you soon

• Windows vista 64-bit crashing into the screen blue and often impossible to reboot after crash

  My windows crashes constantly everytime I try to watch a video or go to a page with java, if I try to install the new version of Adobe, it stops it's self down and do not restart, just it becomes black and stops.  I pay for membership to netflix and I can't even watch a movie. I go on youtube it crashes, I'm trying to play farmville on facebook, he crshes... in a blue screen and this is what I get when I start it again:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA8006F77030
  BCP3: 00000000B 6000000
  BCP4: 0000000000000181
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini071911-04.dmp
  C:\Users\DrGraceG\AppData\Local\Temp\WER-85098-0.SysData.XML
  C:\Users\DrGraceG\AppData\Local\Temp\WER26A2.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  July 20, 2011 Crash, 6 times

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA80070B6030
  BCP3: 00000000B 6000000
  BCP4: 0000000000000181
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini072011-01.dmp
  C:\Users\DrGraceG\AppData\Local\Temp\WER-144456-0.SysData.XML
  C:\Users\DrGraceG\AppData\Local\Temp\WEREBE4.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  July 21, 2011 breaks down, 4 times

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA8007066030
  BCP3: 00000000B 6000000
  BCP4: 0000000000000181
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini072111-03.dmp
  C:\Users\DrGraceG\AppData\Local\Temp\WER-57470-0.SysData.XML
  C:\Users\DrGraceG\AppData\Local\Temp\WERC13B.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  July 22, 2011 crashed 7 times

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA8007066030
  BCP3: 00000000B 6000000
  BCP4: 0000000000000181
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini072111-03.dmp
  C:\Users\DrGraceG\AppData\Local\Temp\WER-57470-0.SysData.XML
  C:\Users\DrGraceG\AppData\Local\Temp\WERC13B.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Many many people have this problem when I talk to others. Miscrosoft compromises our computers so we would have to buy new ones?
  They know there is a problem and they don't even try to find a solution for this. In this economy, they force people to buy new computers, they will just leave people blocked company becase NOBODY takes the phone, if you do not have email, people don't keep in touch, if you are not on a social network or business networking nobody will know your business, you won't make any money nobody reads the ACTUAL newspapers these days, everybody reads the news on the internet. They only hurt people, they are forcing anyone to buy a new computer, people just can't afford it. Hundreds of thousands of people can barely keep their utilities on. In doing so I wish they will reconsider. I am disabled I will definitely cut if my computer goes down for good.

  Can we do any smell that?

  There are also a lot that I need to run startup until the restoration. Windows restarts after the crash of the blue screen, I reinstalled windows twice, it works fine until I have start to install all updates. I have only installed MSE and it still happens. I lost all my music I paid a lot of money for, my paintings for children, important documents, all because I had to reinstall windows twice now.  I may have to reinstall them once more and I do NOT wish to install the updates again. He really never stops until I installed updates to windows. I thought that if I use the programs from Microsoft that it will work, because after all, it's all done by the same company, but no, nothing works. I am so in the sincere real despair. Be alone without technical skills, hardly what actually on my disability check, now I'm going to cut everyone. Now I can't do ANYTHING without it crashing, nothing fun anyway. I tried Microsoft fix, I tried so many solutions. I paid for Adobe photoshop, because I like to draw things and I'm terrified to install it. I'm afraid to do anything fun or useful on this computer.

  If I can afford a new computer at any time, I think I will try Apple, I lost my trust in Windows. Unless they make an effort to solve this problem, then I would give them a chance again, but not if they will try to help. I'm so frustrated. I spend a lot of money on this computer, it's an ENTERTAINMENT laptop and I get not very amused.

  What is going on?

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way? Heat associated
  does not necessarily mean excessive heat, it could be something is too sensitive to the same
  normal levels of heat. Also a computer will produce more heat as is pointed out how adding
  software or updates, among other measures, causes it. Of course those actions should not
  cause enough stress or heat to shut down the computer.

  For a laptop on everything that you can do is reinstall the memory and clean the ventilation openings (still may try to add
  a small fan as a test). Of course first remove all power.

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Check this thread for more information on using BlueScreenView, MyEventViewer and other
  Troubleshooting BlueScreens - top 3 responses (+ 1 other) methods.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------------

  BCCode: 124 0 x 00000124

  This is usually heat related, faulty hardware, memory, or processor even if it is
  "possible" he is associated (rare) driver. To be able to remove ALL and reinstall all the cards, memory
  and cables (at both ends) - actually delete and replace - are not just tight. Ensure
  the system has proper ventilation - add a small fan blowing in the contributions. Carefully
  Inspect the card mother and other cards for damage. Pay attention to the fatal material
  error implicitly. You may need a computer store real (not the leeks and glances at a BestBuy
  or other BigBox stores) or system manufacturer support.

  There has been a few cases where Norton/Symantec and other antivirus/security
  programs have caused this error.

  BCCode: 124 0 x 00000124

  Bug WHEA_UNCORRECTABLE_ERROR control has a value of 0 x 00000124. This bug
  verification indicates that an unrecoverable hardware error has occurred. This bug check uses the error
  data provided by the error Architecture WHEA (Windows Hardware).

  0 x 00000124<-- read="" this="">
  * 1289.html http://www.faultwire.com/solutions-fatal_error/the-System-encountered-an-uncorrectable-Hardware-Error-0x00000124-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Vista loads but then error box appears hgfcbhof.dll indicating that it is not found?

  Why me! Why not.

  I use a Dell Inspiron with Windows Vista. I don't know what I did or did not because, I had put this laptop to use it with a new Dell system. I have sent this back system today a long story for another time.

  I'm booting Windows Vista and instructs the bureau and all the rest done and then I get an error box.

  It is said could hgfcbhof.dll is not complete could not be found and stop the system down that starts a loop!

  So far, I tried to go into safe mode, but it does not say it but in safe mode stops as well. I think it's the same question. I really don't want to reinstall the software if I can't. I can get this driver and reload it. I don't know how because the system does not give me no matter what time do anything, any help is appreciated. I have seen and heard a lot of dll, s but not this one?

  Sarjes

  Hello

  Good and bad: good is that your solution installed antivirus found and deleted an infected file (the .dll file was the virus). The bad is that he did only half of employment, that is to say: he removed the infectious file, but not the entry of the charge he started every time that you start the computer.

  The good news is that it's usually easy to fix with one of the many startup monitor tools available. My suggestion would be to download Autoruns from the link below, then run to locate and remove the line that was trying to load this .dll file.

  Autoruns: http://technet.microsoft.com/en-us/sysinternals/bb963902

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Lightroom loads but freezes on the screen of credits

  Note that I have Lightroom on two Windows machines.  We load, the other does not.

  The machine in question is a dual core 2.5 Athelon 64 XP 32-bit home with memory maxed to the limit of the 3328meg BONE (4 GB installed). NVidia 8600GT pushing a HP LP2465 monitor

  Running Lightroom 2.5 on it and it froze to slash credit screen. By clicking just removed the splash, but then the header says' "not responding".  Closing gets him "unresponsive" pop up.

  So, updated to 2.7 with the same problem.  3.0 and installed with the same problem.

  It's maybe a Windows problem, but is there a solution at hand?

  The other box I spear (as a teaching/learning/video box) has NO problem with 2.7 and it is OLD AND SLOW P4 2.4 with 2 GB.

  Thanks for any help.

  Is it possible for you to post a screenshot of the following folder:

  My pictures > Lightroom >

  Or list the files or folders that you see in the Lightroom folder.

• Satellite A300 crashes on login screen - "prepare your system.

  I have a computer which is a Statelite A300.
  I recently formatted my computer because he kept frezzing.

  I reinstalled using the toshiba recovery patition.
  Once I start the computer I have login and then it screen comes up saying.
  + Preparation of your system. This may take a few minutes. The system can automatically restart... Please wait. +

  So I wait and wait and wait. nothing happenes just restarts.
  Also, I am about to format using recovery dics, some time ago I created in safe mode.

  Anyone got advice. Please do hesitake questions.

  Hello

  Have you tried to repeat this procedure of recovery using the recovery of HARD drive partition?
  In the contrary case that and check if it helps.

  From my own experience that anything can happens during the recovery procedure and assign installation of the OS.

  Some time ago I tried this and my phone hung somewhere during the installation
  I just repeated this procedure and it worked

  Maybe you should try this new

  Good luck

• computer loads but crashes when you try to play netflix

  whenever I try to play a movie from netflix, my computer stops and go to a blue screen that says windows shut down and checking the bios and the occultation

  Hi Corey,.

  Thanks for posting your query in Microsoft Community.

  I understand from the description of the issue that you are having problems with Netflix online video playback. I'll be happy to help you with this problem.

  (1) what browser you use to play Netflix movies?

  (2) what is the exact error message / full blue screen?

  (3) have you made changes on the computer before this problem?

  Method 1:

  Step 1: I suggest you to start in safe mode with networking and see if it helps.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  If the issue is not persistent, then follow the article to find the cause of the same thing.

  Step 2:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.

  Method 2: If the issue is only with Internet Explorer, I also suggest you to run the Microsoft FIXIT and check if that helps.

  Playing video files crashes or blocking Internet Explorer - Windows

  http://support.Microsoft.com/mats/video_freezes_or_crashes/

  Method 3: I also suggest you to follow the steps from the link and check the status of the issue.

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  I hope this helps. Try the above steps and get back to us for more assistance and with the requested details, if the problem is not resolved.

• First elements 14 crashes at login screen

  Hello

  I try to install first 14 newly purchased DVD of real items.

  I tried several times, but the installation hangs on a screen telling me that I have to sign-in to Adobe in order to install. I have an Adobe account, but never go that far to go into the details. The screen hangs at the initial page.

  I use a desktop computer Win 7 64-bit. I have other Adobe software, including Lightroom on this machine.

  Can someone tell how to proceed with this installation? Surprised to find myself in a situation with such a high level company software.

  I got an answer on the forum elements , where I posted this question initially by mistake, telling me to try using Adobe download and install that way using the serial number of my DVD but no joy. After 40 min always stuck at the screen 'necessary connection '.

  I would be grateful for any help.

  Kind regards

  Mike, Scotland

  I recommend that contacting Adobe customer via chat service.

  Contact the customer service

• I just installed the new version of 2015 applications on my mac, and none of the applications more works. They start to load but crash with unknown error.

  ...

  CC applications close immediately after the launch

• Login screen - DNS issue

  We seem to be affected by intermittent empty login screen on my company's website, but only for the microsoft login page, the login page Skype charges well.

  Loading Skype upward, you get this screen:

  

  And users choose 'Microsoft account '. They should then see this screen:

  

  Instead they get this:

  

  Inside, there is a warning message stating the following:

  "This page contains errors. Go back'

  The site uses OpenDNS to filter queries DNS for computers and politics is quite locked.

  On any affected PC, if:

  -Close Skype

  -Run the DNS settings to something like 8.8.8.8 (google DNS server)

  -Load Skype

  The login screen (image 2) loads normally. The user can connect and I can then folding the DNS settings on the OpenDNS server and there is no other problem.

  Which means that Skype is trying to communicate with a Microsoft/Skype server somewhere on the interent and because it is not on my whitelist OpenDNS it gets blocked and it fails as in Fig. 3.

  My question can someone tell me what is the server? I went through the OpenDNS logs and the white list a bunch of stuff from microsoft and other things related to the certificates, but still no luck.

  Evetually I took the suggestion of Techfreak and sniffed packets with wireshark. Was annoyed to discover that the root cause of the problem is strangely named sb.symcd.com.

  Some quick Google-fu led me to a page that said that this area should be on a whitelist for Lync facilities. Hmm.

  Why microsoft couldn't use Server intuitive/descriptive names more is a mystery. In any case, I have whitelisted *. symcd.com and of the limited testing it seems to be resolved.

• For some reason any, that I can't start MSN Messenger, I can start Mail but Messenger crashes just on the login screen.

  MSN Messenger problem

  For some reason any, that I can't start MSN Messenger, I can start Mail but Messenger crashes just on the login screen. This is really weird, what's happening on Vista laptop myt so after what happens for about 3 days, I tried my computer running XP, it's same thing. Help me please!

  Hello

  You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.

• I need help for Windows Vista black screen during the connection, even with the login screen removed

  Hey, I have a problem in Windows Vista:

  I've been updating / updated my graphics card and it is the graphics card, I'm updating, after a while, a black screen will appear (PITCH BLACK) and I there is no cursor and I tried Ctrl + Alt + Delete, but nothing seems to work, after I turned off my laptop, starts to load then it was the new dark night! (NO LOGIN SCREEN). Then I turned off my laptop then I constantly pressed f8, then I pressed "Computer repair" then it loads then my screen showed "Another user", then I clicked it then I had to type my ID but I have no details of connection, I pressed on enter with no connection details, but this still does not work because I had to type in my login information. I tried everything, then I went to safe mode and fact a password and changed my admin account type, then I rebooted my laptop, then I have constantly pressed f8 and pressed "Computer repair" then it loads and then my screen showed 'Another user' again... .
  
  PLEASE I NEED HELP! I WANT TO PLAY MY GAMES!

  Hello

  Follow the steps below:

   

  Method 1: Do the Startup Repair to fix the problem.

  See the following article for more information on the Startup Repair:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

   

  Method 2: Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  For instructions, see the following article:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Let us know if that helps.