Vista machine will power but just a black screen
I have a pavilion of hp with vista home premium. When I turn on my machine that comes from the power on the drive light flashes once and then just stand there. I knocked on all the F keys nothing. I put in the disk recovery and nothing. Thanks for any help
If you do not have a Splash Screeeen (HP Logo, etc.) to turn on, it looks like you have a hardware problem
http://welcome.HP.com/country/us/en/contact_us.html
Contact HP options at the link above.
HP's Support Forums at the link above.
And also, you can not start in the recovery process, which is implemented by HP.
If under warranty, contact HP.
If this isn't the case, under Warrany, I would try a local and trusted computer repair workshop.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Hi, I installed the creative cloud, but when I download Lightroom CC, the browser indicates that the program is downloaded, creative cloud appears but overall the program is just a black screen, I do not see what I am downloading or the status of the download, I use a pc
You must install Ligjhtroom cc app to app Adobe Creative Cloud.
See the link below:
https://helpx.Adobe.com/creative-cloud/KB/black-screen-sign-in-creative-cloud.html
-
Vista 32 freezes then goes to the black screen?
I am running windows vista 32 bit OS, why my entire system freezes and then shuts down completely but not turned off, just a black screen?
Hello
It is a general performance troubleshooting utility quite comprehensive which
might help if the questions are not heat or material. Try the clean boot
and other methods to see if we can determine the cause.-----------------------------------------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
-
Won't start at all. just a black screen. Only the satrts upward on safe mode
Won't start at all. just a black screen. Only the satrts upward on safe mode
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Original title: can see more videos on the internet is
Since last week, my computer won't play any video on the internet. When you click on the arrow of reading, it becomes just a black screen. I can always download movies from netflix. I uninstalled adobe Flash Player and reinstalled and still does not work. Someone at - it answers? Thank you!
Hello
Yes, it will work.However, when you try to open something on the internet, it opens with the default browser.Method 1: You can make the default Internet Explorer browser and then perform the troubleshooting steps.Reference:Change the web browser by default
http://Windows.Microsoft.com/en-GB/Windows-Vista/change-your-default-Web-browserMethod 2: Since then, it was working fine before, you can restore the computer to a date when it was working fine.
Reference:System Restore: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questionsIf online videos play fine in Internet Explorer and cause problems only when you play in Mozilla Firefox, you can ask your question in the Forums in Support of Firefox as well:Here is the link: http://support.mozilla.org/en-US/questions/new -
Son of anarchy BD Discs will not play on BDX4400 (black screen)
Hello world!
Just wondering if anyone can help with the following: I had some problems with the blu - Ray of the BDX4400 player (remote works do not, the reaction is slow, frozen Portal etc.) for awhile, but it was ok with playing DVDs / blu - ray... Up to our days. I come from the Sons of Anarchy box, insert the first disk, and then the screen goes black.You can hear the disc turning for a few seconds and the play icon appears but then it's all... Just a black screen and you can't even eject the disc (remote not working do not when it is at this point).
I tried other discs of this set, but the same thing happens. However, the other DVD / Blu - Ray work. Therefore, I am sure that the player is fine, but maybe im missing a parameter that must be changed...?
Someone had a similar problem? (I disabled the internet connections and the bd-live function, but not luck)The region code is correct and FW is up to date, so this may not be the root of the problem, if all fails, I may have to blame the actual discs, but I have trouble believing that 15 discs are damaged...
Anyway, if anyone has any suggestions, which would be greatly appreciated.
Thanks in advance
It is always a stupid situation if everything works perfectly, but not with some discs/disc.
In case your player works well with the other BR disks that the problem must be with the disks you have.Is there a possibility to test the disks on a few other BDplayer?
You laptop / PC with BD optical drive? Can test you?To be honest, what is unclear to me that something can be changed (settings) in this case. Either it works or not.
-
Desktop do not Come Up - just a black screen.
I had an error in the windows Explorer and windows shows just a black screen. I am able to open the Task Manager, open the switch user option, etc. After doing ctrl + alt + delete. Windows does not continue on the desktop. I can't open internet explore via the Task Manager run special command (or go to websites like microsoft support). The start bar too is not available and no desktop icons appear. It looks like a problem with a MSWin update. Help, please.
I use Windows 6 6002 SP2 on a Toshiba Satellite A200 - 1 M 5. Thank you
Hello islem.
1. what was the error message from Windows explore, that you have received?
2 did you recently install Windows updates on the computer?
3. do you have security software installed on the computer?
Check if you can access the desktop by typing explorer.exe using the Task Manager.
If you are able to access the desktop, then I suggest that you perform the clean boot procedure and check if it helps.
If you are unable to access the desktop then boot in safe mode then run clean boot.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Restart the computer to return to normal mode.
Try the steps below to perform the clean boot on the computer.
It is possible that some third-party programs installed on the computer is causing the problem.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
-
My refuses Samsung R700 Vista start all I get is a black screen saying a disk read error occurred, press Ctrl alt del to reatart. I can not get to the windows screen, cannot get in safe mode, only the BIOS screen. I managed to get the Samsung recovery screen once, but he said that he did not find the repair disc in! Help, please?
It is possible that your hard drive is damaged. You can download Windows recovery disk (if you haven't) and run Startup Repair this one.
-
I turn on my i mac I can hear it from, but remains a black screen
I turn on my i mac I can hear it from, but remains a black screen
Try the help in this article to support > on the screens you see when you start your Mac - Apple support
-
I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.
anesvet,
I'm going to sound like I'm repeating myself tonight... (see previous 4 posts...) but try this:When you start start pressing F8 until you get the Windows startup options. Then try "Last known good configuration" see if that helps. If this does not work, try to F * then try to go to Safe Mode. If those who do not help, I would start with your XP CD to recovery mode and run "chkdsk/r" then "sfc/scannow". QQ learn manage!
-
I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device. is it possible to reset to original settings?
I am running Windows XPclint341,
Thanks for posting on the Microsoft Answers forum. We cannot guide you more precisely by changing the BIOS settings that the BIOS settings are specific to your motherboard. However, most (if not all) parameters of the BIOS have an option to restore the default BIOS (sometimes called "default opitimized"). It may be an option in the menu that you highlight, then press enter or it can be assigned to an F key and States at the bottom of the screen, press F? for the default settings. I hope this helps. If you are still not able to reset, check with the manufacturer of PC for more information about the BIOS. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hi can someone help me... I try to open my microscope fluorescnece images and they are all just empty black screen while the merged file shows the image. I can't change grayscale in RGB color space (like my single images the info on them is gray and the merged image color space is RGB)
Try to update your video card driver to exclude
Then reset your preferences - with Photoshop CC you can do it in the preferences. Earlier versions require that you press the modifier keys that you launch Photoshop. Ctrl alt shift on Windows or cmd opt shift on Mac.
-
Well my pc sleeps properly the problem is when I press the power button to wake up to the top the power turns on and the green lights are on but it sends no signal to the monitor, so all I get is the black screen and the only way to put it back on is to make a vigorous reboot by pressing the Start button. either way, I have Home Basic windows installed on the same pc and I didn't have this problem, now I have windows home edition premium with service pack 2 and installed all available updates. any suggestions?
Hello
1st I want to erase the General corruption and repair/replace damaged/missing system files:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------
Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem
and similar are not enabled.Shoot sleep problems - hibernation
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlHow to troubleshoot performance problems with sleep, hibernation and resume in
Windows Vista
http://support.Microsoft.com/kb/950686Panel configuration-Device Manager - look at the settings for the network adapter power management,
WiFi, Modem and other devices. (Double click on the device and the power management tab)All the default power plans and then set them as you wish.
==========================================
I would also update the main especially video drivers - check again the power management
Settings after installation.This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your
System. For each driver in the list, additional useful information is displayed: load address
of the driver, description, version, product name, company that created the driver, and
more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now click on
Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
Click on - uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
and then go look for new ones manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
Ideas:
- Programs that you have problems with Windows XP
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hello tfortexas
Do you get the login screen before the black screen? You never even get to the desktop?
Try this fix. You will need an XP installation CD. If you don't have that it is OK to borrow one. Try to get the same version of XP as your example Home/Pro/Media
Configure your PC to boot from the CD if it is not already configured in this way. You may need to enter the BIOS to configure the PC to boot from the CD.
Set the boot order of
Floppy (if present)
CDROM
Hard drive
RECORDING and EXIT
Start your PC with the XP installation CD in the drive. When you see the prompt «Press any key to boot from CD...» ", do and start the process to boot on CD.
When the Recovery Console option is available ("press R to start the Recovery Console"), do it. You may be asked to what Windows installation to enter, what kind of cases the number of the Windows installation you want to work (usually ' 1').
When you are prompted, enter the password for the Windows installation. If you have not set up a password just press ENTER
At the command prompt, type
FIXMBR
Come in
Then type
Fixboot
Come in
Type
OUTPUT
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: my Media Player does not work when I play video all I get is the sound, the screen is just black hear any picturedoesn can't if it's a DVD or a download on the internet its just sound and a black screen?
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
1. have you made changes on the computer recently?
Method 1.
Change hardware acceleration
You can try to change the hardware acceleration in the middle and check (you can try another level too.)
a. right click on a space empty on the desktop.
b. go to the resolution of the screen.
c. click Advanced settings, and then click the "troubleshooting."
d. set the hardware acceleration in the middle. (here you'll get the only option your video card sound support).
Method 2.
a. you can also check that Windows is up-to-date to check updates for your hardware.
You can also run the difficulty below that diagnoses and identify codecs that can cause windows to become unstable or stop responding.
http://support.Microsoft.com/GP/video_freezes_or_crashesb. if the problem persists, you can check the latest video card driver provided by the manufacturer of the PC that is compatible with Windows Vista is installed.You can also check out the article below which explains to update hardware drivers.Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
Is - this filed Have GPS Navigation?
Hello. So I know FFOS a modem and e-mail and music apps, and I know that there cards. But there are also GPS navigation? Kind regards
-
Folio 1040 G1: How to clear the bios password
I got a laptop HP 1040 Folio G1. A few years ago, I would set the password of the bios on this subject. (I have still remember and use PW daily) But now, I didn't need to protect more bios password. I tried to delete it, but I found that - to just ch
-
HP officejet pro L 7680 All in: hp L7680 scanning problem
My HP Pro L7680 Officejet will print and fax from the computer, but it will not copy or scan. A message appears telling me to turn the printer off and on again, but it does not work. Works very well. What has gone wrong? Help
-
Access remote USB to E3000 problem?
Hello I recently got the E3000 router because it has USB and is simultaneous dual band router. It is connected to the ATT modem + router. I disabled wireless 2wire ATT modem and connected the linksys router. Now, after much playing with it, I have co
-
Compatible chargers for Z3 Compact and Z3
I want to learn the Chargers are compatible with the Z3 and compact Z3. Strangely, I couldn't find compatibility information on Chargers listed in sonymobile.com, UCH20, UCH10, EP880, and EP881. Maybe if I can learn voltage and amperage of these char