Vista Media Center does not display the subtitles TV

Similar Questions

• Windows vista Media Center will not download the new configuration sealing more up-to-date for my region?

  Windows vista Media Center will not download the latest options for my region.  It is under the TV signal, TV download

  configuration options.  When I finally get through all the steps I get only 1 station with a signal strong enough.  I was able to get much more than that in the past.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

   

  Check if that helps.

• Why vista Media Center does not recognize my card tuner Hauppauge 1850

  I just install WinTV-HVR-1850, Manager of device States work properly, yet Media Center does not recognize the tuner... Keep received message "no tuner found" not could someone explain what I need to do.

  Hello

  I suggest that you install the latest driver and software from the Web site below and check if it works:

  http://www.Hauppauge.com/site/support/support_hvr1800.html

  Try to contact the hardware manufacturer for assistance.

  Hope this helps,

• Windows Media Center does not record the calendar.

  Planning to record a program, but sometimes lapsed time up to the point where it does not record. I am running Windows 7 Home. Yes, I checked preferences but which differs only up to 15 minutes max.  I have reinstalled twice already. Why please?

  Hello

  (1) did you make any changes before the show?

  (2) what is the brand and model of the computer?

  Windows Media Center records the first home run HD programs or any which TV tuner installed. However, you may need to follow a few rules.

  -If you turn off your computer, Windows Media Center does not have a regular program. The computer must be turned on or "standby mode" to record a television show. The computer will not automatically in standby mode if Windows Media Center is open.

  
  -Make sure that you turn off the screen and lower or turn off the sound if you have one at the request of a record in the middle of the night and don't want to be disturbed.

  -Your scheduled recording may not save in the following situation: schedule you a recording in Windows Media Center to start in less than ten minutes, close Windows Media Center and put your computer into standby or hibernation mode immediately. Use or one of the following options to save your record programmed:

  a. do not close Windows Media Center before you put your computer on standby or hibernation.
  b. after having programmed a recording, wait a minute before you put the computer in standby or hibernation.

  I would have you refer to the article below:

  Why my TV did not show record in Windows Media Center?

  http://Windows.Microsoft.com/en-in/Windows7/why-didn

  Please let us know if that helps.

• Window Media Center does not see the internet / only to download the guide.

  In the last three months. I was not able to download TV guide. I went through all NET configurations include the configuration of the tv tuner. Also bought new tuner. The computer has a modem of broad band always connectted to the internet. Count works very well on the internet. Media Center not connect and download tv guide to the registration of the advance. If I go to live TV, I see TV channels. It does not show the description of the channel or what's playing on this channel. When I go to the configuration of internet connection guide and test it just sitts there never out error just never connects. Help, please. I have windows Vista 32 bit. Also, did all the windows update and download the latest version of .net Framework.

  Be sure to reconfigure your firewall or internet security to allow WMC download guide. S.Sengupta Media Center MVP

• Windows Media Center does not display my photos. I tried to re-setup my album and it shows my files but no pictures in them. I can see my photos in all viewers

  all my photos are in JPEG format, I download my photos on several websites and on my Windows live.com page, I also see with Windows Live Photo Gallery, I use Adobe Photoshop 7 to edit and save my pictures in .jpeg format, I can visualize in Picasa, PhotoStudio, ZoomBrowers EX etc.. I can spend my photos to one of my other computers and my pictures by e-mail, and they can be consulted. I open one of my photos in Photoshop and saved in a folder on my desktop in .jpeg and .bmp and it does not display. I sort my folder in date and make sure that hidden files is checked. I know I'm missing something, but still nothing.

  Hello
   
  Welcome to the Microsoft Answers site!
   
  How long have you had this problem?

  All files compatible photo in your library in Windows will appear in Media Center, including whatever it is stored in the folder my pictures or public photo. If you store images somewhere else, like an external hard drive, you can add them to the Media Center as well. To learn how, see Add files to media in Windows Media Center.

  The following is a list of reasons why an image will not display in Media Center, as well as suggestions for correcting the problem.

  • The picture file type is not supported in Media Center. For example, some digital camera photos are saved in the RAW file format, which is not supported in Media Center. If you have a photo editing software, try to open the picture in that program, and then resaving in a file type that is supported (for example, JPEG). To see what types of files are supported in Media Center, see file types supported by Windows Media Center.

  • The file is corrupted. If this is the case, try to open the image in another photo editing program, and then save it back into a different file type. For more information on the damaged files, see the files corrupted: frequently asked questions.

  • The file is hidden. You can view a hidden file by changing its properties in Windows. For more information, see Show hidden files.

  Please see the article for more details below:

  http://Windows.Microsoft.com/en-us/Windows7/working-with-pictures-in-Windows-Media-Center-frequently-asked-questions

  Back to us for assistance.
   
  Kind regards
  Savan - Microsoft technical support.

• Why Windows Media Center does not display tile of Internet TV?

  Does not accept downloads

  Hello, Packard37

  You are in the US, UK or elsewhere?

  Internet TV is available only in the United States and the United Kingdom - assuming that you are located in the United States / UK:

  Check your region settings in Windows. Go to start > Control Panel > clock, language and region > region and language. On the location tab, make sure that the country is selected in the administration tab, make sure that the language is also correct as well, otherwise click the settings change system locale.

  Go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. At the command prompt, run the following command and press ENTER: start/wait %windir%\ehome\mcupdate - uf-nogc

  After you run this command, open Media Center and check if it is available, otherwise, you may need to reset the Media Center, note that this operation removes all custom settings and you will need to re-run the installation again:

  Open the command prompt, as described above once again and then type the following command and press ENTER: MediaCenterRecoveryTask - %SystemRoot%\ehome\mcupdate.exe

  One time only complete, open Media Center and run through the configuration. If you do not immediately see the Internet TV, let Media Center open for about 5-10 minutes, then restart and check if it is available or not.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows vista media center does not I can uninstall and reinstall?

  Windows vista Media Center has been installed, but will not respond. How can I fix this problem?

  Hello

  You cannot uninstall or reinstall

  Try this:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Toshiba 40RL938 does not display the subtitles

  Hey,.

  The problem is when streaming movie with the file .str in the same directory as the film, using different dlna servers, that I can't get the subtitles on, no matter what I do. Impossible to find info in manual and pressing the button subtitles does nothing, it is not even a message. Any suggestions?

  Thank you.

  Have you noticed the problem even if you play the same movies recorded on USB and connected directly to the TV with media player?

• XP Media Center does not recognize the atsc tuner

  Comes with a mistake to try to at least one device with ntsc tuner.  I have an atsc/qam tuner.

  Operating system		System model
  Windows XP Media Center Edition Service Pack 3 (build 2600) Install language: English (United States) Local system: English (United States)		Dell Dimension E521 Inc. System Service tag: 1K6C6C1 (support for this PC) Chassis serial number: 1K6C6C1 Case type: Desktop
  Processor		Main circuit
  2.00 GHz Dual Core AMD Athlon 64 X 2 hides the central memory of 128 kilobytes 1024 kilobyte secondary memory cache 64-bit ready Multi-core (2 total) Not hyper-thread		Board: Dell Inc. 0CT A03 103 Serial number:... CN708216AQF10C. The bus clock: 1000 MHz BIOS: Dell Inc. 1.1.4 12/09/2006
  Readers		Memory modules
  349.53 GB drive hard usable capacity 292,35 gigabytes of free disk space HL-DT-ST DVD-ROM GDRH10N SCSI CdRom Device [scanner] TSSTcorp DVD +-RW TS - H553A SCSI CdRom Device [scanner] WDC WD5000AAKS-00UU3A0 [hard drive] (500,11 GB) - drive 0, s/n WD-WCAYU6672846, rev 01.03B01, SMART location: healthy		3072 MB usable memory installed Slot machine 'DIMM_4' has 1024 MB (serial number E82397F1) Slot machine 'DIMM_3' has 1024 MB (serial number E823981D) Slot machine 'DIMM_2' has 512 MB (serial number F802488F) Slot 'DIMM_1' has 512 MB (serial number F802485E)

  Hello

  1. What is the brand and the model number of your TV tuner card?
  2. is it compatible with Windows XP Media Center? She never worked properly on your computer?

  Method 1.
  First of all I ask you to install the latest drivers for your manufacturer's Web site TV tuner card and check out them.

  Method 2.
  Also, check out the methods listed in the articles below and check.
  You receive an error message "No. Tuner available" when you try to watch TV Online after connecting a USB TV tuner to your computer Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/891108

  Update 1 for Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/873369

  I hope this helps.

• Vista Media center does not start

  From the start, I get the warning box that Media center has stopped working. It says Windows will close the program and notify me if a solution is available. When I close the program - banner in the blue windows media center remains here and begins to the microsoft update page. I go through the update page, and it says that my system is up to date and working correctly.

  I received a rundll error message and did a fact a reg clean. It always does the same thing: what I can try next?

  Hello rspenyvr,

  If you create a new user, you have the same problem with the newly created user account? I found in other posts that somehow the user account is corrupted and will help create a new account to correct the problem.

  Answer please come back and let us know.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Media Center does not record the whole show

  Says Windows Media Center he recorded with success a program about 66 min record reports, but when I try to watch that it only shows the first 30 seconds or more.  Some programs record very well however.  I am running win 7, 64 bit, intel I5 processor terrabyte 3 HD previously worked well, another computer with the same hardware not having not problem.

  I guess you missed that in my original post I said that the same Watch record fine on another computer using the same material for TV tuners.  They also sometimes record ok on this computer, but at other times are not.  I suspect something is damaged in the media center and will try to uninstall and reinstall when I have the time

• Media Center does not support the digital TV Tuners to the Canada, only US places why

  Is there a reason why Wondows 7 Premium Home Media Center isn't support / detect my digital TV tuner when the location is set to the Canada? Only the ANALOG tuner is detected. I have ATI TV Wonder HD 750 PCI-E installed

  I am living in Calgary, Alberta Canada and the Canada's analog and digital at the end of August Tv is not broadcast anymore.

  If I change my position to the United States and enter a ZIP code, as indicated for example, beside the ZIP box, both my analog and digital tuner is detected. manual configuration I would like to be able to view local HD channels, but the TV guide is is in the sewer because I put en location.

  I thought earlier that there will be an update when switch us to television digital broadcasting here in the Canada, but is not passed.

  Yet once, why the Media Center only detects the analog tuner when I have the location defined in the Canada and my correct Postal Code? I enjoy to get an answer to this, if it is the policy of some sort or a miss from Microsoft.

  Hi Annie,.

   
  I suggest you to follow the links and check if it helps.
  http://Windows.Microsoft.com/en-us/Windows7/TV-signals-that-are-supported-by-Windows-Media-Center
   
  http://Windows.Microsoft.com/en-CA/Windows7/set-up-a-TV-signal-in-Windows-Media-Center
   
  http://Windows.Microsoft.com/en-CA/Windows7/TV-on-your-computer-understanding-TV-signals-and-TV-tuners
   
  http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

   

   
  I hope this helps.

• Media center does not recognize the unencrypted HD channels

  I'm trying to record live TV of TV that gets its strings by simply using the power (without decoder) coaxial cable. When I set up WMC, choosing the selection of regular (analog) cable packages it offers, I get all my channels except 5 or 6 unencrypted HD channels that offers my firmware. What are the channels that appear on my TV as fractional as channels 116.2, 117.2, etc.. I really want to record these HD channels. Is it possible to add them manually to the WMC?

  Hello MtnGoat,

  Thank you for visiting the Microsoft Answers site.

  You can check that the card TV tuner and model is a compatible TV tuner of QAM.

  In addition, you can check if you are able to view the unencrypted channels when the cable is connected directly to the TV.

  Here is a useful link which includes information on taken TV signals supported by Windows Media Center:

  http://Windows.Microsoft.com/en-us/Windows7/TV-signals-that-are-supported-by-Windows-Media-Center

  For further assistance, you can also post the question to the following Microsoft Web http://thegreenbutton.com/ Windows Media Center Community site.

  I hope this information is useful.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My 'Windows Media Center' does not detect the signal Uverse

  After my reading a previous post, I tried manually configuring in antenna / analog and all I get is static.  It seems that I am unable to go back and try again.

  How you set up Uverse to 720 Lenovo?  I ran it through HDMI but want to run via the Media Center.

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  What is the accurate and complete error message you get?

  I suggest you try the following steps:

  a. open Windows Media Center.
  b. click 'Continue' on the Media Center configuration page, then choose "Custom".
  c. Select "System requirements" and Windows Media Center will check your connection network and U-Verse. Click on 'Next' to continue the installation and access to optional "Installation."
  d. Select "Set Up My media centers" on the optional configuration screen. Click "next".
  e. add multimedia files to Windows Media Center. Select one or all the following folder options: music, photos, videos, recorded TV or movies, and then click "next".
  f. Select "Add files to library" and click "next". Choose the folders you want to add to Windows Media Center. Click "Finish" when you are finished adding content.