Vista 'Open file location' has stop working after installing IE9 Beta

Similar Questions

• on dv6 fingerprint reader has stopped working after installing Norton 2012

  Fingerprint reader has stopped working after installing Norton Internet Security 2012 on both of my notebooks from HP.

  Product name: HP Pavilion dv6

  Operating system: Windows 7 64-bit

  Error message in Device Manager under biometric devices in Device Manager displays an exclamation mark beside validity sensors (WBF) (PID = 0018). The following message is under the general tab: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  Driver is present and seems to be up-to-date.

  Appreciate your help.

  I have finally isolated the problem of my software lack of HP dv6 fingerprint reader. I think Norton Removal Tool, available online at www.symentec.com/nrt, was the reason. I am sure this conclusion because the exact same problem occurred after I installed Norton Internet Security 2012 on laptop HP same as my wife. I tried, in vain, to uninstall and reinstall the driver for the biometric fingerprint device provided by Validity Sensors, Inc.

  After spending a day and a half to try to "solve" the problem, I decided to restore my system and go back to the prior agreement of the point of the installation of Norton. Thank you HP to make this process quick and painless. Don't forget that if you installed anything after the restore point, it will have to be reinstalled.

  Fortunately, there's a less intrusive on CD of Norton removal tool. This utility uninstalls an older version of Norton you are requested to restart and then installs the latest NIS. It is a method of removal safer that wide brush offered by the Norton Online link, which wipes everything remotely suspect.

  After reinstalling Norton Internet Security 2012 from the CD, everything works as it should, including the fingerprint reader.

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite U300-130 - TosBtMng has stopped working after installing Nokia PC Suite

  I have the same problem too... with Toshiba Satellite U300-130.

  Bluetooth worked well enough before I installed the Nokia PC Suite for my mobile on my PC (new version 7.1.26.0 Web site).

  To be correct, as a first step, I even managed to maintain a connection between the PC and the Nokia Bluetooth and ran the synchronization of the contacts. I tried several times, but each time synchronization run ended with the message "PC couldn't get response from your Nokia.

  After the reboot, my PC went crazy and started broadcasting the message "TosBtMng has stopped working" and it restarted every time that I ask him to close.

  Installation of the new version of BT Stack (6.40) does not resolve this error.

  Help, please

  I also use Toshiba Satellite, I use this [suite Nokia pc | http://www.softsea.com/review/Nokia-PC-Suite.html] version

• Desktop Window Manager has stopped working after installing Defender Pro 2012 5 in 1

  Hello

  My father has a Windows Vista. It works very well. Until we installed Defender Pro 2012 5 in 1,

  It was a bit slow... the screen flickers of its lights for a few seconds every 10 minutes, I get this... I already have contact Defender Pro, and they said that it was not their fault.

  Help, please!

  DESKTOP WINDOW MANAGER HAS STOPPED WORKING
  Windows can check online for a solution to the problem

  -> online and are looking for a solution (recommended)
  -> close

  APPCRASH
  Application name: Dwm.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e02696
  Fault Module name: ntdll.dll
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb74dd3
  Exception code: 80000003
  Exception offset: 0000000000045f00
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: 0fef
  More information 2: 0d8b4b37a0c1e529a7398b6615cc3528
  Additional information 3: f196
  Additional information 4: acf765d48a0657c8822f379a6b5f3b91

  Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Sorry to tell you,

  I already solved the problem.

  Just to let you know, I buy the product, because

  I used the free and they don't really work (IN MY OPINION).

  Anyone has this PROBLEM (appcrash)

  Go to start

  Click on Control Panel

  go to appearance and personalization

  Click on appearance color of windows.

  then click on settings in the appearance of progress.

  under the gaze of point for the theme of basic or something like that.

  Want more info on Dwm.exe?

  Click here-> http://www.howtogeek.com/howto/windows-vista/what-is-dwmexe-and-why-is-it-running/

• Satellite P200 - Microphone has stopped working after installing Windows 7

  My Satellite P200 came with Vista Ultimate, the mic has worked for a few months, all of a sudden it stopped. I decided to install Windows 7, but the microphone still does not work.
  Any ideas anyone?

  I use this laptop for skpe my people a lot. I can use an external mic very well, but really want my only integrated works again.

  Hey Buddy,

  Sounds like there of something wrong with your installation of Windows 7 so the microphone doesn t work anymore...

  I recommend updating the driver of the webcam, because the microphone is a part of it. You can find updates driver here:
  http://EU.computers.Toshiba-Europe.com

  I put t know what Satellite P200 you have exactly, but if you can t find a driver Windows 7 for webcam, choose another model which is fully Windows 7 taken in charge, e.g. by Satellite P300.

• Sony motion eye cam on my sony vaio vgn-fe48g has stopped working after installing win7

  Please could someone help me to set up the Board Sony motion eye cam and FN keys that don't work after upgrading from Vista to Win7, Sony are no help at all.

  Device Manager can't even see the cam. I tried to install it manually and the nearest me am added the cam, I was able to start.

  Maybe you are missing the drivers. Are there drivers available for this W7?

  You should check with Sony for your specific model and area/region Web site to see if they provide any W7 drivers at all. If Yes, have you installed them for the web cam?

  EXAMPLE - this site is for the India, they have a few drivers for Vista HP 32 bit, but none that seems for W7 HP 32-bit. - http://www.sony.co.in/support/product/vgn-fe48g

  This is a missing driver for W7 then issue you might try to install drivers vista in compatibility mode, but this is not guaranteed and can cause other problems. Back up your data first to be safe. See http://www.sevenforums.com/tutorials/98073-drivers-install-vista-drivers-windows-7-a.html and you need the correct version of the pilot 32 or 64 bits depending on the case.

• Windows 7 Aero Desktop stopped working after installing IE9 & windows update last night (and reboot)

  I installed IE 9 beta on Windows 7, then installed windows 2 critical updates that night and restarted my PC.  Aero works does not in the morning.  Here are the errors in the event log:

  Level Date and time Source event task category ID
  Information on 2010-11-07 10:51:21 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-07 10:47:27 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0 x 40010004)
  Information on 2010-11-07 08:35:57 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-07 08:35:56 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0xc00002fe)
  Information on 2010-11-07 07:59:54 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-06 18:43:23 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0 x 40010004)
  Information 11-06-2010 15:36:27 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information 11-06-2010 15:32:32 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0 x 40010004)
  Information 11-06-2010 15:27:04 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-03 22:26:49 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-03 22:26:49 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0xc00002fe)
  Information on 2010-11-03 07:46:14 use Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in
  Information on 2010-11-03 06:55:39 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0 x 40010004)
  Information on 2010-11-03 06:51:52 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-03 06:51:52 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0xc00002fe)
  Information on 2010-11-03 06:50:30 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-03 06:50:30 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0xc00002fe)
  Information on 2010-11-03 06:45:15 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-03 06:42:49 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0 x 40010004)
  Information on 2010-11-03 06:22:59 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-03 03:05:55 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0 x 40010004)

  For some reason, I have no longer than 11/6 recovery point so I can't roll back.   This utility only difficulty and just sayd that the Desktop Manager is disabled.   I was digging on the net for days, but no luck.  Ideas?  Thank you!

  What video card you are using? You have installed the latest drivers? "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• File Explorer has stopped working properly from the taskbar

  File Explorer has stopped working properly from the taskbar. Currently, I get only 3 windows on taskbar & opening No. 1 opens no.2 & vice versa, but no. 3 opens on its own. Can someone explain this & find a cure?

  I would like to highlight the file Explorer icon and pin it again.  To do this.

  (1) close all running programs, including records from the file Explorer

  (2) right click on the icon on the task bar Explorer and "Unpin from Taskbar" to remove

  3) press Windows + R to display the race. Type C: and press OK. This will open your C: drive.

  (4) make a right click on the taskbar that appears, the file Explorer icon, and then click "Code Pin to Taskbar" to pin it.

• My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5

  My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5, but my InDesign and Photoshop work very well. How can I get Illustrator to start working again?

  NOTE: I read a previous thread on the opening of the Java Control Panel in the system preferences (because I installed the new java my computer asked me for marketing immediately after in the new yosemite), but there is no icon Java not found. I installed this new java download more than once and still can not find it. Help!

  olou,

  If the suggestion on possible recording by Larry fails, see this page

  https://www.Adobe.com/account/my-products-services.html

  I'll try to ask a personal forum friend who knows what to do.

  For download, read this

  http://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

  and update, see

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh

• G72-a20EM screen has stopped working after updating the BIOS F.48.

  How is it possible that BIOS update recommended could turn off the LCD screen.

  Currently I see almost anything on the screen, but vga port works. But increasingly,.

  Intel graphics card is not recognized.

  G72-a20EM screen has stopped working after updating the BIOS F.48.

  What can I do to fix that?

  Good news!

  I found the working version, and it is version F.08.

  Supposedly new version have different Active cables, and this is the reason why the screen is dark.

  So, case closed, everything is perfect.

• "First Pro CC 2014.2 has stopped working" after a few moments of running and usually after you import a video clip.

  "First Pro CC 2014.2 has stopped working" after a few moments of running and usually after you import a video clip.

  I use a Lenovo T440p with Intel Core i5 @2 laptopp. 60 GHz, 8 GB of RAM. Windows 7 64-bit with Service Pack 1. Intel HD 4600 graphics card. All the drivers are up to date.

  All other non - CC Adobe video editing programs work.

  Help, please. Thank you.

  Dennis,

  Changing the video rendering engine should have solved the problem. Is it still pending?

  Thank you

  Regalo

• Development in error "Installer.exe has stopped working" while installing the new modem.

  Development in error "Installer.exe has stopped working" while installing the new modem. I try to install the ZTE AC8710 modem on my 32-bit windows vista (home edition) system, but whenever the facility is subject to the full I get the error 'Installer.exe has stopped working' and complete Setup doen't. The same error is hit when I try to uninstall the ZTE modem that is installed intestinal. The installation file has CD/install drivers for windows vista. Information below is displayed in the application event viewer for this error log. Help, please

  Log name: Application

  Source: Application error

  Date: 2010-01-03 02:04:50

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Monica-PC

  Description:

  Application Installer.exe, version 0.0.0.0, time stamp 0x4b208462, Installer.exe module, version 0.0.0.0, time stamp 0x4b208462, exception code 0 x 40000015, offset error 0x0002efec, 0xadc process id, failed failed application start 0x01cab8b5797299e1.

  The event XML:

  1000

  2

  100

  0 x 80000000000000

  309

  Application

  Monica-PC

  Installer.exe

  0.0.0.0

  4b 208462

  Installer.exe

  0.0.0.0

  4b 208462

  40000015

  0002efec

  ADC

  01cab8b5797299e1

  Hi Tonio saini,.

  Navigate to the location of the programs .exe file and right click on the .exe file, and then select run as administrator to install the modem.

  You can also check the following link, try the suggestions and check if that helps:

  http://social.answers.Microsoft.com/forums/en/w7hardware/thread/4ce21286-3a77-4A06-923c-889d657f8e33

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

  NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

  Message that appears is: -.

  Windows has stopped this device because it has reported problems. (Code 43)

  BB

  Install the latest driver from nVIDIA:

  http://www.nvidia.com/object/Win7-WinVista-32bit-260.99-WHQL-driver.html

  http://www.nvidia.com/object/Win7-WinVista-64bit-260.99-WHQL-driver.html

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Message "Windows Explorer has stopped working" after the opening of the "Images".

  Hello.
  I have Windows Vista 32 - bit home basic OS with SP2.
  When I open "Images", I get a message saying "Windows Explorer has stopped working" with an option to restart the program, which just closes. The details of the message are:

  Signature of the problem:
  Problem event name: InPageError
  Error state code: c0000185
  Type of media loopholes: 00000003
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Information additional 01:40 d 4
  More information 2: 4062ad41ec8067256aa4c5e2b56d3c79
  Information additional 03:40 d 4
  Additional information 4: 4062ad41ec8067256aa4c5e2b56d3c7

  This error message comes just out of nowhere I do not install anything or make updates when this issue was raised. I tried to restart the computer, but it did not help.

  I checked for viruses, but none came.

  Then, I tried to do system restore, but it could not solve the problem.

  In addition, I used the command line to find the problem and found a few corrupted files, it has been unable to remedy.

  Details of SFC are:

  «2010-11-17 11:38:44, Member's file Info CSI 00000160 [SR] cannot repair [01:24 {12}] "settings.ini" in the sidebar of Microsoft Windows, Version 6.0.6002.18005, pA = Process_Architecture_Intel <0>...» »
  and there is more like that, but I don't know how to copy and paste these messages.

  I don't know what to do from here.

  I don't want to reinstall all of Vista. In addition, Vista is PREINSTALLED on my computer.

  Oh and I am not an expert in using the command prompt,-j' found how to do this in other forums.

  Please help on how to solve this problem.

  Thank you!

  Hello

  Norton search spyware however your question may be caused by or to the less aggravated
  by Norton.

  Norton/Symantec is known to cause strange problems and aggravate others. Better is to uninstall
  for a test by simply disabling will still allow pieces of it to install. Uninstall it and run the Norton
  Removal tool to avoid problems causing leftovers being left behind. The following recommendations
  to use when testing, even better all the time.

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  Norton Removal Tool
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  ------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.