Vista recovery disk does not work

my recovery for a6057c disk will not work after that I used the NeoSmart
recovery disk.

After logon to Vista I see that empty office, I can access the task
Manager by CTRL - ALT_DEL.manager.

Windows and all my files are on drive D and my C is the drive has nothing on this subject now. I'd do it
I just want to make a disaster Recovery and
all over again with new factory. Does anyone have any ideas?

I now remove the prtition C on my drive.

Vista still labels the d drive, I have no C?

I found the answer on the Microsoft Knowledge Base.

Item number: 947288 primary partition drive letter designation is lost when you use WinRE to repair a GPT in Windows volume

The article is also for Vista.

Article ID: 223188 How to restore the drive letter of the system / boot in Windows

Would do the same thing.

I took the article to use regedit to swap my C & D return records.

Now windows Vista starts OK. (All I had before was just an empty office).

I also received my HP Factory disaster recovery disks it looks they will work if I need.

Tags: HP Desktops

Similar Questions

  • For 1000-zx satellite recovery disk does not work

    XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

    Hello

    Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
    However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
    In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

    Good bye

  • I'm trying to recover my Windows Vista, but one of my #2 recovery disk does not work... What can I do?

    I copied 2 cd on my hard drive disk recovery & disk #2 does not work. I tried to get through the system recovery to restore the computer to its original factory shipped State. It calls into original form and content reinstalles. Then it restarts to finish and said: ERROR LOADING C:\PROGRAM FILES\WINDOWS MEDIA PLAYER\wmssetup.dll THE SPECIFIC MODULE COULD NOT BE FOUND!

    THEN IT CONTINUES TO THE NEXT WINDOW WHICH SE BED:
    INSTALL WINDOWS
    WINDOWS COULD NOT PARSE OR PROCESS UNATTEND ANSWER FILE FOR [SPECIALIZE]. THE SPECIFIED IN THE ELEMENT OF THE RESPONSE [MICROSOFT-WINDOWS-DEPLOYMENT] FILE.

    AFTER THIS WINDOW IT SAYS PRESS OK BUT MY LAPTOP DOES ME NOT LEAVE THE REST OF THE ARROW IN THE MIDDLE OF THE WINDOW & WON'T LET ME CLICK ON IT! WHAT CAN I DO TO GET THROUGH THIS PROCESS!
    YOUR HELP WOULD BE GREATLY APPECIATED! THXS
                                                      

    Contact the computer manfacturer, who provided the original discs.

  • Toshiba Satellite A135 laptop: 0xc000000f - Windows Vista Boot error - > recovery disk does not work, can't get the PC to boot.

    I have read all the info out there and tried many things including using the provided by Toshiba, Vista recovery disks

    I can't go down the screen of boot error, although no matter what I try.

    Is my drive into two partitions, and I am ready to sacrifice one of them if necessary to get the computer to boot.

    Is there a way I can enter directly into the computer and reinstall windows?

    I'm not a pro, then simple instructions are the best.

    THX

    Hello

    1. don't you make changes to the computer until the problem occurred?

    2. What are the troubleshooting steps you tried to solve the problem?

    3. the problem occurs in safe mode?

    4. don't you try to do the Startup Repair?

    I suggest you try the steps from the link below and check if it helps.

    How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows: http://support.microsoft.com/kb/927392

    Hope this information is useful.

  • Satellite L350-170 - recovery disk does not work

    Hello

    I have a L350-170 running Windows Vista home, I recently buy a Toshiba restore CD and now that it's happened, it does not work.

    I put in the CD and boot from the CD drive, I can hear work and the display shows "Windows loading files" and a bar appears at the bottom of the screen, after that, the screen turns white and all I'm left with is a pointer of the mouse and a black screen.

    Thank you
    Jackie

    Hello

    Have you tested if the laptop would start using another bootable Linux Live CD, WinPE or Win XP disc?
    Please check that would help determine if the problem is related to the computer laptop or recovery disk.

    Please also check if the HARD drive is ok. For this test, you can use a test called Drive Fitness Test free HARD drive tool. Google for it.

    However, it could also be a defective recovery disc and in this case, you should get in touch with the guys where you ordered this drive may be you need a replacement.

  • Satellite A30 - 203 - recovery disk does not work

    Hi all

    I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

    Thank you

    Hi dimation,

    It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

    In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

  • Satellite C650 - error reading disk and the recovery disk does not work

    Hello

    I have a toshiba Satellite C650, who has recently developed with a disc read error. I want to access the command prompt to try some possible solutions I've read on the internet.

    I made a Windows 7 recovery disk using my other acer laptop which has also installed Windows 7 64-bit. When I use the recovery disk and it loaded the files etc it evokes just a black screen and the cursor.

    Does anyone have any ideas as to why this is happening?
    I tried to start my computer acer laptop from the recovery disk and it worked fine.

    As is - this does anyone have suggestions as to why I get the message "disk read error - press ctrl, alt and delete to restart?

    Any help would be appreciated, thanks.

    On this virtual path, it is not easy to offer the exact diagnosis, but of course, there must be a problem with the HARD drive. Can you get a second one for test purposes and exchange it. Just to be sure if the HDD is troublemaker.

    But there is something else:
    > I made a Windows 7 recovery disk using my other computer acer laptop...
    Sorry, but I don t understand this. Can you please explain what you did exactly?

  • Recovery disk does not work now I have installed a new hard drive.

    I replaced my hard drive on my laptop HP - computer pavilion dv7 notebook. My recovery disks do not seem to work now, I get to 62% completion and then the error message "Recovery Manager is unable to restore your computer by using the original image. Please contact HP support. "Error code: 0xe0ef000e" do I need to buy a new HP recovery discs? Thanks, Nick

    Hi, Nick:

    Unfortunately, I don't have any experience in troubleshooting these special software installations.

    We should expect to download and install.

    If they are not, I have no tricks up my sleeve for you to try.

    I recommend starting a new thread describing your questions with this software and hope that someone else in the support forum can help you with these items.

    See you soon,.

    Paul

  • Satellite P10-304: 2nd recovery disk does not work

    I'm selling my laptop.

    Went to use recovery of original product CD provided along with the PC.

    1 disc worked OK - unfortunately 2nd disc (undamaged) stops at about 60 percent and gives the following message;

    error number 437
    Can not read the file
    version: 7,00 (Apr 2001 19, build 254).
    License: XQ199905
    command line arguments: - clone, mode is pload, srx = x: \01367000.GHO:1, dst = 1:1 - batch

    PROG mode: prog_local
    Name of the path:
    dump file: x:\01367001.GHS
    dumpPos: 0
    flagexplode: 10

    State of IRQ of mouse: no IRQ (0)

    Help, please!?!

    I have a buyer waiting and everything seems to be Dutch!

    Hello

    It's not easy to say what's wrong with the 2nd recovery disk.
    I would recommend formatting the HARD drive completely and try again to recover the operating system. If it doesn't work, well try to contact Toshiba. Here, you can order the recovery CD. Maybe the problem of recovery will be solved as a gesture of goodwill.
    Nevertheless, the recovery cd is not expensive.

  • C870-121 satellite recovery disk does not work?

    Hello...

    I have a weird problem, I bought the computer 6 months ago and have been happy with it, but I'm protected by a kind of virus and all the operating system has been * ed big time, so yesterday I want to da a factory install with recovery disks that I created when I bought the computer.

    I have the Toshiba system recovery DVDs 4 disc, I insert the sytem disc and look as it should, it loads and then it ask disc of recovery disks, insert disk 1, and after 10 seconds it ejects again and claim a disc again.

    I checked the 5 discs on my other computer and there are data on them and they look good, I tried to insert the discs to see if I'm past them when I printed on them, nothing works, it simply will not recognize disc and I'm stuck? Any help from anyone?

    I'm sure that's not material that are bad, because I had an old windows XP disk, and after that I tried everything, I tried to install on the computer and everything was fine, but I would like to have windows 7 as the computer came with...

    Regards Allan Thomsen

    Hello

    Very strange boyfriend
    Would it be possible that the CD/DVD drive is unable to read the first disc correctly?
    I mean, maybe it's a disk problem and not the problem with the data

    I don't know what's wrong here, but you have some a lot of m options here:
    To recover the laptop, you must use the Toshiba recovery disks or HARD drive recovery
    You can use the HARD drive recovery process?
    Turn on the device, press F8, choose fix my computer-> drive HARD recovery.

    If this is not possible? Well. You can always order a new disc here:
    http://backupmedia.Toshiba.EU/landing.aspx

  • For Satellite 5200 recovery disk does not work

    Hello

    I try to use the recovery for Satellite 5200 disk but it won't work. I have the recovery disk in the DVD player and I tried holding C and also tried to change the boot sequence by pressing F12 at startup to the top but he's not in it.

    Someone at - it ideas?

    Is there a problem with the drive while the OS is running? Try to use different bootable CD and see exactly what is happening.

  • Satellite L300D-202: restore using recovery disk does not work

    Good afternoon

    Wonder if anyone can shed some light on this error message I get when trying to restore my laptop...

    «Setting permissions V:\HDDRecovery...»
    V:\HDDRecovery the system cannot find the specified file
    Unpack the WinRE...

    L ' ImageX for Windows tool
    Copyright bla...

    Opening the file in error [V:\HDDRecovery\SWImg\06546XSP.svml
    ERROR: ImageX could not apply WinRE V:\HDDRecovery\SWImg\06546XSP.svm index 1 of the HARD drive to W:!

    Press any key to continue... »

    After that, I find myself with the Toshiba Recovery with no action software and a screen BACK Active but nothing happens...

    I'm guessing that lack of HD, received today from Toshiba for this system recovery media

    Laptop is:
    Satellite L300D 202

    NB. If I restart the laptop start date and shows BOOTMGR is missing Ctrl Alt Del to restart...

    Any help appreciated,
    Thanks in advance,

    Rick0684

    > NB. If I restart the laptop start date and shows BOOTMGR is missing Ctrl Alt Del to restart...

    Hmm... for me, it seems that the laptop does not start from the disc (DVD), but it attempts to boot from the HARD drive...

    In any case, have you tried to boot from another disk; for example, Win XP, Linux Live CD?
    To do this, and check if it is possible... If Yes, format the HARD drive and try to boot from the recovery again disc!

    PS: Have you tried a HARD drive recovery option?
    Turn on the unit, press F8 and choose fix my computer
    After that, select Toshiba HDD recovery option if possible.

  • Recovery disk does not work for Satellite A100-197

    I'm working on an A100-197, which would not boot into normal Windows, but was able to start in safe mode.
    I used MSConfig to disable all startup and other services. Not good.
    I used the system restore. Not good.
    I have scanned for viruses, rootkits, etc. None found. Not good.
    I copied data to another hard drive in SafeMode with network and inserted the recovery DVDs.
    Through unpacking and got message saying to remove DVD - did this and system seems to freeze.
    Click the exit button and it restarts, but Windows froze (the movement stopped moving blobs). Tried safe mode
    but got a message saying that the installation of the system has not finished.
    Tried the recovery again, but this time I left the unpacking screen 100% of the overnight to see if
    He has nothing. There can be no. Click on exit and got the same as above.
    HDD formatted in partition magic and I tried again. Not good.
    Created 5 GB FAT32 partition and DVD files copied to the FAT32 partition. Tried to run the decompression program
    back. He refused to run in DOS mode.
    I think that connects the hard drive on another machine and RecoUnpack.exe a work PC running to
    unzip the files on the laptop HARD drive image, but this is crazy - the recovery disk is supposed to retrieve the
    System. What else can I try?

    GMC

    I would say that you have some serious hardware malfunction. Have you ever tried to check the RAM and the processor?
    In your case, I would try to run the UBCD4Win (www.ubcd4win.com) and superPI allows to see if the RAM is faulty.

    It could also be another component such as the motherboard or something on the motherboard (graphics, sound, some capacitors)

    It s just a suggestion, but you could really give my hint a chance. ;)
    I would also try another HARD drive in this machine, maybe the controller from your old HARD drive disappeared...

    Welcome and appreciate all comments

    Dennis

  • For Satellite L450 recovery disk does not work

    My laptop's daughter was so slow, that we decided to take it back to factory settings. There is no disk recovery with the laptop because it has the repair work however when we did the computer is no longer started upward and when we started it in safe mode, the repair option was gone!

    I've then went to Toshiba.eu and bought the recovery disc, seem to work, load files etc and then says loading windows, but the screen just goes black.

    I can't find a phone number or contact point on the invoice and if I will have to consider in a shop to repair I don t want to have paid for both disks that do not work!

    I do something wrong or can any one help?

    Thank you

    New laptops are available with preinstalled operating system and without recovery disk but in user s manual is clearly described that you can create this preinstalled software recovery disk Toshiba Recovery Disk Creator.

    I m wondering really you didn't mark this option.

    In any case, try to reuse this disc to see if the problem occurs again and again. If you will not be able to install the original recovery image I recommend you contact the nearest Toshiba service provider and ask for help.

  • Qosmio G30 - 161 - recovery disk does not work

    Hello world

    I need help to understand what happened with my laptop G30-161

    The last time I tried to reinstall the product recovery things was wrong.
    The time where computer supposed to install windows then a blue display screen and stops the process and I get a black screen where there are three choices: start windows normally, or with the command prompt or networking safe mode.
    When I tried safe mode: I get a message that windows is not yet installed!

    When choose ok then the windows install see the screed for a few seconds and then the blue screen appears and disappears a few seconds and the windows on the screen appears as if the system will be installed, and after a few seconds, I get the same - back screen with the choice of the tree again.

    I tried several times to use the product recovery disc and enter in the same circle.

    great wishes to you all

    Hello

    > I have tried several times to use the product recovery disc and I enter the same circle.
    Are you sure you have booted from the recovery disk?
    This seems strange to me that you get the back same screen (start windows normally, or with the command prompt or networking safe mode) when you start drive recovery.
    These three options are displayed only if the laptop would be started from HARD drive.
    So please try to boot from the CD again.
    Insert the CD, turn on the unit, press F12, choose ODD as a source of start-up and follow the instructions on the screen.

    If this is not possible, then I would recommend the HARD drive.
    I recommend Drive Fitness Test. This software freeware s (google).

    Perhaps something went wrong with the HARD drive.

Maybe you are looking for

  • touchscreen not working not but the digitizer pen is for x 201

    x 201 3093-a15 touch does not but the digitizer pen is but you can see it touch the hardware on the Device Manager and then you go to the control panel pen tablet properties are and click on him and say touch in water from the tap also same Pen and t

  • USB 6008 pull down resistance

    Hello I have a USB-6008 read a signal to 5V on one of DIO ports. The 5V is or the circuit is open. Since the 6008 traction has internal open ups resembles a true TTL signal. I think using a 850 Ohm pull down on the output line.  I think that should l

  • Standard PCI to PCI Bridge and Standard PCI Enhanced Host Controller does not properly

    My AVG Pro tells me that I currently have two problems that can affect the graphics and/or the speed of my computer. (1) PCI Standard PCI bridge to PCI does not work (2) standard Enhanced PCI to USB Host Controller device is not working properly I tr

  • my computer takes forever to load

    original title: loading my computer takes forever to load, it did not have it an hour ago. And a message pops up saying something about the script to stop work or something like that. Just started this about 45 minutes ago. What can I do to fix this?

  • Others on the network can't see what I have access in InPrivate?

    Original title: research InPrivate? My research on the internet and sites be visible to those on my network so I navigate sites InPrivate?